Weird Connection Issues

I just bought my macbook pro and I'm already having internet issues.
The mac sees and connects to my home's wireless network but it will not pull up any web pages.
When I unplug my connection from the back of my p.c. and plug into my mac I get the internet beautifully.
What's going on?
Do I need to do something with my wireless router to make it work with a mac?
Help please.
Thanks in advance.

look at the ip set on your router and look at the ip on your mac... my guess is that they are not on the same line... example: router: 192.168.0.1....mac:192.168.1.99... will not match because of the .1... so just change your mac to 192.168.0.99 and that should clear it all up...

Similar Messages

  • Have you been getting timeouts and other weird connection issues lately?

    Internet connection has become a bit wonky as of late, have you been experiencing some or all of the following symptons?
    1) Most internet speed test sites just stop before completing as if they have timed out (i.e. speedtest.net).
    2) Sites will start loading quickly but then sometimes randomly stop and have to be manually refreshed.
    3) Downloads will randomly stop downloading for some moments before resuming (particularly from Steam)
    4) Tracert to some websites that were causing issues show timeouts on peering with Alter.net servers.
    Looks like there are some issues between Verizon and Alter.net (formerly MCI, now Verizon owned) in NY.... Any word on when we can expect a resolution? This is quite frustrating as it affects a good amount of traffic.

    I'm a little further east than you out here on Long Island, Touyats, but I've seen none of the issues you or the Original Poster here are experiencing.
    Assuming you're having the problems on a device connected to your router by Ethernet cable (WiFi opens up an entire range of other possible problems) you might try getting your router assigned a new WAN IP address. 
    If you want to give that a try, see this post for the steps involved:
    http://forums.verizon.com/t5/FiOS-Internet/How-am-I-able-to-change-my-ip-address/m-p/703336#M47733

  • Weird connection issue

    This post is about an experience my mother-in-law had at a hotel in Bangkok. Her new MacBook wasn't working properly online at the hotel even though multiple pc's were able to connect and surf quickly. She says she could pull up Google and the mac said it was connected but should couldn't reach any other websites. Any ideas or suggestions about what could cause this?

    I am having a very similar issue, were able to resolve yours? Would you be able to offer any help?
    thank you in advance!

  • Very weird connection issue

    Ok. Got a new one.
    This is Safari 3.1.1 PPC, running on a PowerBook G4, 10.4.11. The machine is definitely connected to the Internet. I receive email, and Firefox is working flawlessly.
    But Safari can't open any webpage, I have trashed Safari itself and all files in the ~/Users/Library/Safari folder (keeping my bookmarks file on the desktop temporarily). I then reinstalled Safari by downloading a new copy from the Apple website, and installing from scratch.
    Same problem with the new install.
    Any ideas?

    Heh. I got you all stumped??

  • Weird connection issue here..

    I just erased and reinstalled leopard . But the internet connection has problems i which i cant fix it..
    First of all, i use airport and connection cuts out randomly.. Like every 2 3 minutes..
    And when it connects back, it is really really slower than it should be..
    The third and the weirdest thing is , when you click the airport icon on the top, after like 30 seconds of the connection, it stops showing all the wireless networks, and it only shows the one it'd been connected to.. Most likely after this thing happens, it cuts out again..
    I didnt do anything strange when reinstalling but the only thing was i did not put any password to my user account.. I know it may sound stupid , but just trying to give some info which may help for the answer..
    Any idea is appreciated.. Thank you..

    try restarting your wireless router.
    also try using a wireless sniffer such as kismac. Then you can see if there are other network in your area and what channels they are broadcasting on.
    Then set your wireless router to broadcast on channel 1, 6 or 11. choosing a channel that any nearby networks aren't using.
    other things to try
    goto your network preferences and create a new location. Setup your wifi network as your preferred network for that location. Also make sure your wireless router is using WPA or WPA2 security.

  • Really weird connection issue

    My laptop connected to the internet fine when I got the airport. True plug and play. Yesterday I plugged a printer into the airport using an ethernet port (I have a usb hard drive already attached). Now the laptop still connects to the network - can connect to the desktop and the usb hard drive - but firefox and ie say there is no connection. I can ping www.google.com from the CMD prompt and I tried reseting my dns stuff - suggestions from the firefox community. In the support tab, all looks normal, IP DNS etc. I can even print to the ethernet printer, through the desktop.
    The desktop is fine. Please help!!

    I don't know why, but the computer did have access to the internet, I just could not access it with the browsers. Apple software did an automatic update on quicktime and the update software and when the computer re-booted, all was working!

  • N1KV - Connectivity issues

    Hi all,
    I  am trying to bring up my first N1KV in a lab environment and I am  having some weird connectivity issues. Hope someone can help !!
    I've  been working together with our VM team and we have the following  installed and configured. We have ESX 4.1 installed on an HP DL360 G7  with 4 NIC's and the VMNic's are assigned as follow.
    -  vmnic0 to vSwitch0 with the following portgroups (Service Console,  N1KV-Control, N1KV-Mgmt, N1KV-Packet and VMKernel) and all portgroups  are in the same VLAN.
    - vmnic1 to vSwitch1 for vMotion traffic
    - vmnic2 to vSwitch2 for VM data
    - vmnic3 to vSwitch3 for VM data
    I  have VSM and VEM version 4.2(1)SV1(4) installed on the same ESX host  and connected to vCenter with the following port-profile and svs-domain  configured. I am using L3 mode for VSM and VEM communication I believe  this is what Cisco recommends going forward.
    port-profile type ethernet system-uplink
      vmware port-group
      switchport mode access
      switchport access vlan 7
      no shutdown
      system vlan 7
      description ServiceConsole-Contrl-Packet-Mgmt
      state enabled
    port-profile type ethernet vMotion-uplink
      vmware port-group
      switchport mode access
      switchport access vlan 21
      no shutdown
      description vMotion uplink
      state enabled
    port-profile type ethernet W0AA0159-VM-Data-Uplink
      vmware port-group
      switchport mode trunk
      switchport trunk allowed vlan 8,99
      channel-group auto mode active
      no shutdown
      description W0AA0159 VM Data Uplink
      state enabled
    port-profile type vethernet VM-Data-VLAN8
      vmware port-group
      switchport mode access
      switchport access vlan 8
      no shutdown
      description VM Data VLAN8 Server Farm
      state enabled
    port-profile type vethernet VM-Data-VLAN99
      vmware port-group
      switchport mode access
      switchport access vlan 99
      no shutdown
      description VM Data VLAN99 Web-App Server Farm
      state enabled
    port-profile type vethernet vMotion
      vmware port-group
      switchport mode access
      switchport access vlan 21
      no shutdown
      description vMotion
      state enabled
    port-profile type vethernet System-Console
      vmware port-group
      switchport mode access
      switchport access vlan 7
      no shutdown
      system vlan 7
      description vMotion
      state enabled
    port-profile type vethernet L3vmkernel
      capability l3control
      vmware port-group
      switchport mode access
      switchport access vlan 7
      no shutdown
      system vlan 7
      state enabled
    svs-domain
      domain id 101
      control vlan 1
      packet vlan 1
      svs mode L3 interface mgmt0
    Here is my problem:
    When  I move vmnic0 to the system-uplink port-profile with N1KV-Control,  N1KV-Mgmt, N1KV-Packet map to System-Console port-profile, and VMKernel  maps to L3vmkernel port-profile, all seems to work fine at this point. I  can see the VEM comes online and all is good. But when I start moving  the second vmnic over (either vmnic1, vmnic1 or vmnic3 don't matter) all  hosts got disconnected, vCenter shows all hosts disconnected. And the  only way to bring the environment back is to log into ESX and run ESX  commands to delete and recreate the vmnic's then map them back to  vSwitch.
    Has  anyone ran into this issue before ? Could it be that vmnic is assigned  to the vSwitch that you can't move it over to the N1KV ?
    Thanks in advance !!! I appreciate any inputs / suggestions !!!
    D.

    Hello,
    We need additional information to further investigate this behavior. Please open a TAC service request with following logs after re-creating the issue.
    VSM log file ( SSH session output file )
    show tech-support svs | no-more
    VEM log bundle
    SSH into ESXi host and execute " vem-support all " command
    Padma

  • SFTP connection issue with Dreamweaver 2014

    I have a very weird SFTP connection issue with Dreamweaver CC (2014). I am on a Mac running 10.9.4 and have no problem connecting to my server through SFTP with Dreamweaver CS 6. However, using the exact same settings on CC (2014), I get the following error: "An FTP error occurred - cannot make connection to host. Your login or password is incorrect. Please check your connection information".
    I am truly at a loss here. Command line connection works without problems.
    Any thoughts?

    Hi there,
    Try after rebooting your system or in a different user account on MAC.
    Is there any limit with number of login sessions with your SFTP?
    Could you check with Filezila or similar FTP client and connect to your site, see if you get any error there?
    Thanks.

  • 30EA3- 2.*: Weird performance issues for editing objects

    Hi,
    I noticed weird performance issues for editing objects: when right-clicking on them in the navigator tree and selecting Edit, you get the old progress dialog "Connected to database XXX". This stays on screen a lot longer than it ever did (last sequence I edited over 30 seconds!).
    Cancelling displays a "Error retrieving schemas" dialog, but then opens the Edit dialog correctly. No further side effects noticed, so I think sqldev is adding useless overhead here.
    If confirmed, can this be bugged and/or fixed by production?
    Thanks,
    K.

    Yes, I mean in context of other hangs reported. This one is a nasty performance issue, but IMO the others are real show stoppers.
    Atomic steps are easy; any* Edit (object) action inside the context menu of the navigator or the Edit button of the object viewer.
    I took a lot of dumps (every second or so) and came to these findings:
    Full thread dump Java HotSpot(TM) Client VM (14.2-b01 mixed mode):
    "ProgressBarThread" prio=6 tid=0x049de000 nid=0x1674 runnable [0x056ff000]
       java.lang.Thread.State: RUNNABLE
            at oracle.jdbc.driver.T2CStatement.t2cDefineFetch(Native Method)
            at oracle.jdbc.driver.T2CPreparedStatement.doDefineFetch(T2CPreparedStatement.java:818)
            at oracle.jdbc.driver.T2CPreparedStatement.executeForRows(T2CPreparedStatement.java:746)
            at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1100)
            at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
            at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
            at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3425)
            - locked <0x1828f7f0> (a oracle.jdbc.driver.T2CConnection)
            at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1202)
            at oracle.javatools.db.execute.QueryWrapper.executeQueryImpl(QueryWrapper.java:280)
            at oracle.javatools.db.execute.QueryWrapper.access$000(QueryWrapper.java:76)
            at oracle.javatools.db.execute.QueryWrapper$QueryExecutionRunnable.runImpl(QueryWrapper.java:390)
            - locked <0x1828f7f0> (a oracle.jdbc.driver.T2CConnection)
            at oracle.javatools.db.execute.StatementWrapper$ExecutionRunnable.run(StatementWrapper.java:692)
            - locked <0x10c504c0> (a oracle.javatools.db.execute.QueryWrapper$QueryExecutionRunnable)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper.runAndLog(ProgressBarExecutionWrapper.java:136)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper.access$000(ProgressBarExecutionWrapper.java:38)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper$R.run(ProgressBarExecutionWrapper.java:180)
            at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
            at java.lang.Thread.run(Thread.java:619)
    "pool-2-thread-2" prio=6 tid=0x06795400 nid=0xa58 waiting on condition [0x073ef000]
       java.lang.Thread.State: TIMED_WAITING (parking)
            at sun.misc.Unsafe.park(Native Method)
            - parking to wait for  <0x131fded0> (a java.util.concurrent.SynchronousQueue$TransferStack)
            at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
            at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:424)
            at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:323)
            at java.util.concurrent.SynchronousQueue.poll(SynchronousQueue.java:874)
            at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:945)
            at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
            at java.lang.Thread.run(Thread.java:619)
    "pool-4-thread-1" prio=6 tid=0x06654400 nid=0xa08 waiting on condition [0x05dff000]
       java.lang.Thread.State: TIMED_WAITING (parking)
            at sun.misc.Unsafe.park(Native Method)
            - parking to wait for  <0x18334e28> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
            at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
            at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:1963)
            at java.util.concurrent.DelayQueue.take(DelayQueue.java:164)
            at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:583)
            at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:576)
            at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
            at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
            at java.lang.Thread.run(Thread.java:619)
    "WeakDataReference polling" prio=2 tid=0x064de800 nid=0xc58 in Object.wait() [0x0eb3f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
            - locked <0x18335088> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
            at oracle.ide.util.WeakDataReference$Cleaner.run(WeakDataReference.java:88)
            at java.lang.Thread.run(Thread.java:619)
    "Background Parser" prio=6 tid=0x04decc00 nid=0x1248 waiting on condition [0x0ea3f000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
            at java.lang.Thread.sleep(Native Method)
            at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
            at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
            at java.lang.Thread.run(Thread.java:619)
    "IconOverlayTracker Timer" prio=6 tid=0x063e5400 nid=0x16fc in Object.wait() [0x076ef000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.util.TimerThread.mainLoop(Timer.java:483)
            - locked <0x180c2840> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)
    "WaitCursor-Timer" prio=6 tid=0x04e39c00 nid=0x910 in Object.wait() [0x074ef000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.util.TimerThread.mainLoop(Timer.java:483)
            - locked <0x1792d840> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)
    "Native Directory Watcher" prio=2 tid=0x04e38400 nid=0x12b8 runnable [0x062ef000]
       java.lang.Thread.State: RUNNABLE
            at oracle.ide.natives.NativeHandler.enterWatcherThread(Native Method)
            at oracle.ide.natives.NativeHandler$2.run(NativeHandler.java:252)
            at java.lang.Thread.run(Thread.java:619)
    "Background Parser" prio=6 tid=0x04d86c00 nid=0x12ac waiting on condition [0x061af000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
            at java.lang.Thread.sleep(Native Method)
            at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
            at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
            at java.lang.Thread.run(Thread.java:619)
    "Background Parser" prio=6 tid=0x04d82800 nid=0x1240 waiting on condition [0x05eff000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
            at java.lang.Thread.sleep(Native Method)
            at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
            at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
            at java.lang.Thread.run(Thread.java:619)
    "TextBufferScavenger" prio=6 tid=0x04d81400 nid=0x10ec in Object.wait() [0x05cff000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            - waiting on <0x1729c0a8> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
            - locked <0x1729c0a8> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
            at oracle.ide.model.TextNode$FacadeBufferReference$PollingThread.run(TextNode.java:1949)
    "BaseTreeExplorer.NodeOpeningExecutor" prio=6 tid=0x04ba0400 nid=0x11bc waiting on condition [0x05aff000]
       java.lang.Thread.State: WAITING (parking)
            at sun.misc.Unsafe.park(Native Method)
            - parking to wait for  <0x131a1910> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
            at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
            at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
            at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
            at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
            at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
            at java.lang.Thread.run(Thread.java:619)
    "pool-2-thread-1" prio=6 tid=0x04c1c400 nid=0x11b8 waiting on condition [0x059ff000]
       java.lang.Thread.State: TIMED_WAITING (parking)
            at sun.misc.Unsafe.park(Native Method)
            - parking to wait for  <0x131fded0> (a java.util.concurrent.SynchronousQueue$TransferStack)
            at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
            at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:424)
            at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:323)
            at java.util.concurrent.SynchronousQueue.poll(SynchronousQueue.java:874)
            at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:945)
            at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
            at java.lang.Thread.run(Thread.java:619)
    "Scheduler" daemon prio=6 tid=0x04b9a800 nid=0x11b0 in Object.wait() [0x058ff000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at oracle.dbtools.raptor.backgroundTask.TaskLinkedList.takeNextTask(TaskLinkedList.java:47)
            - locked <0x131a1ba0> (a oracle.dbtools.raptor.backgroundTask.TaskLinkedList)
            at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$SchedulerThread.run(RaptorTaskManager.java:422)
    "TimerQueue" daemon prio=6 tid=0x0445b000 nid=0x10fc in Object.wait() [0x057ff000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at javax.swing.TimerQueue.run(TimerQueue.java:236)
            - locked <0x12f7c028> (a javax.swing.TimerQueue)
            at java.lang.Thread.run(Thread.java:619)
    "ChangeSetService" prio=2 tid=0x049d0800 nid=0x1060 in Object.wait() [0x053ff000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            - waiting on <0x12e140c8> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
            at java.lang.Object.wait(Object.java:485)
            at oracle.jdevimpl.vcs.changeset.ChangeSetService.awaitEvents(ChangeSetService.java:178)
            - locked <0x12e140c8> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
            at oracle.jdevimpl.vcs.changeset.ChangeSetService.eventLoop(ChangeSetService.java:199)
            at oracle.jdevimpl.vcs.changeset.ChangeSetService.access$200(ChangeSetService.java:56)
            at oracle.jdevimpl.vcs.changeset.ChangeSetService$2.run(ChangeSetService.java:138)
            at java.lang.Thread.run(Thread.java:619)
    "TimedCache-Timer" daemon prio=6 tid=0x03af9c00 nid=0x414 in Object.wait() [0x03fdf000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.util.TimerThread.mainLoop(Timer.java:509)
            - locked <0x12869c58> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)
    "JarIndex Timer" daemon prio=6 tid=0x03945400 nid=0x171c in Object.wait() [0x042df000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.util.TimerThread.mainLoop(Timer.java:509)
            - locked <0x127d85a8> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)
    "AWT-EventQueue-0" prio=6 tid=0x030f4800 nid=0x1684 in Object.wait() [0x041de000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.awt.EventQueue.getNextEvent(EventQueue.java:479)
            - locked <0x127d8658> (a java.awt.EventQueue)
            at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:236)
            at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
            at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
            at java.awt.Dialog$1.run(Dialog.java:1045)
            at java.awt.Dialog$3.run(Dialog.java:1097)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.awt.Dialog.show(Dialog.java:1095)
            at java.awt.Component.show(Component.java:1563)
            at java.awt.Component.setVisible(Component.java:1515)
            at java.awt.Window.setVisible(Window.java:841)
            at java.awt.Dialog.setVisible(Dialog.java:985)
            at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
            at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
            at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:352)
            at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:229)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper.execute(ProgressBarExecutionWrapper.java:108)
            at oracle.javatools.db.execute.StatementWrapper$ExecutionProxy.doExecute(StatementWrapper.java:647)
            at oracle.javatools.db.execute.StatementWrapper$ExecutionProxy.access$200(StatementWrapper.java:585)
            at oracle.javatools.db.execute.StatementWrapper.doExecute(StatementWrapper.java:307)
            at oracle.javatools.db.execute.QueryWrapper.executeQuery(QueryWrapper.java:215)
            at oracle.javatools.db.dictionary.DictionaryDatabase.listObjectsImpl(DictionaryDatabase.java:323)
            at oracle.javatools.db.ora.BaseOracleDatabase.listObjectsImpl(BaseOracleDatabase.java:524)
            at oracle.javatools.db.AbstractDBObjectProvider.listSchemas(AbstractDBObjectProvider.java:859)
            at oracle.ide.db.dialogs.BaseDBEditorFactory.createNamespace(BaseDBEditorFactory.java:503)
            at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:357)
            at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:332)
            at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:54)
            at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:314)
            at oracle.dbtools.raptor.utils.DataBaseNodeUtil.editNodeWizard(DataBaseNodeUtil.java:45)
            at oracle.dbtools.raptor.oviewer.xmleditor.XMLBasedEditor.handleEvent(XMLBasedEditor.java:152)
            at oracle.ide.controller.IdeAction.performAction(IdeAction.java:531)
            at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:886)
            at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:503)
            at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
            at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
            at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
            at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
            at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
            at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
            at java.awt.Component.processMouseEvent(Component.java:6263)
            at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
            at java.awt.Component.processEvent(Component.java:6028)
            at java.awt.Container.processEvent(Container.java:2041)
            at java.awt.Component.dispatchEventImpl(Component.java:4630)
            at java.awt.Container.dispatchEventImpl(Container.java:2099)
            at java.awt.Component.dispatchEvent(Component.java:4460)
            at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
            at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
            at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
            at java.awt.Container.dispatchEventImpl(Container.java:2085)
            at java.awt.Window.dispatchEventImpl(Window.java:2475)
            at java.awt.Component.dispatchEvent(Component.java:4460)
            at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
            at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
            at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
            at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    "AWT-Shutdown" prio=4 tid=0x030e6400 nid=0x1680 in Object.wait() [0x040df000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
            - locked <0x127d8718> (a java.lang.Object)
            at java.lang.Thread.run(Thread.java:619)
    "AWT-Windows" daemon prio=6 tid=0x03abb400 nid=0x1610 runnable [0x03edf000]
       java.lang.Thread.State: RUNNABLE
            at sun.awt.windows.WToolkit.eventLoop(Native Method)
            at sun.awt.windows.WToolkit.run(WToolkit.java:291)
            at java.lang.Thread.run(Thread.java:619)
    "Java2D Disposer" daemon prio=10 tid=0x03a97400 nid=0x15f8 in Object.wait() [0x03cdf000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
            - locked <0x127d8810> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
            at sun.java2d.Disposer.run(Disposer.java:125)
            at java.lang.Thread.run(Thread.java:619)
    "Low Memory Detector" daemon prio=6 tid=0x030d1c00 nid=0x15dc runnable [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "CompilerThread0" daemon prio=10 tid=0x030cb800 nid=0x15d8 waiting on condition [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "Attach Listener" daemon prio=10 tid=0x030ca000 nid=0x15d4 runnable [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "Signal Dispatcher" daemon prio=10 tid=0x030c8c00 nid=0x15d0 waiting on condition [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "Finalizer" daemon prio=8 tid=0x030b9c00 nid=0x15c8 in Object.wait() [0x0343f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
            - locked <0x12770298> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
            at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x030b5000 nid=0x15c4 in Object.wait() [0x0333f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
            - locked <0x12770320> (a java.lang.ref.Reference$Lock)
    "main" prio=6 tid=0x00967800 nid=0x1504 waiting on condition [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "VM Thread" prio=10 tid=0x030b1000 nid=0x15c0 runnable
    "VM Periodic Task Thread" prio=10 tid=0x030d3c00 nid=0x15e0 waiting on condition
    JNI global references: 2645
    Heap
    def new generation   total 12544K, used 6205K [0x10010000, 0x10da0000, 0x12770000)
      eden space 11200K,  53% used [0x10010000, 0x105e2ff0, 0x10b00000)
      from space 1344K,  18% used [0x10c50000, 0x10c8c7b8, 0x10da0000)
      to   space 1344K,   0% used [0x10b00000, 0x10b00000, 0x10c50000)
    tenured generation   total 165468K, used 99280K [0x12770000, 0x1c907000, 0x30010000)
       the space 165468K,  59% used [0x12770000, 0x18864308, 0x18864400, 0x1c907000)
    compacting perm gen  total 50432K, used 50210K [0x30010000, 0x33150000, 0x38010000)
       the space 50432K,  99% used [0x30010000, 0x33118aa8, 0x33118c00, 0x33150000)
    No shared spaces configured.- In the beginning of the waiting time, the "locked <0x10c504c0>" in the "ProgressBarThread" changed (at least once) to "locked <0x10c51da0>".
    - Then halfway the waiting time, the "pool-2-thread-1" disappeared, then "pool-2-thread-2" shortly after.
    - Then the "TimedCache-Timer" changed to
    "TimedCache-Timer" daemon prio=6 tid=0x03af9c00 nid=0x414 in Object.wait() [0x03fdf000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.util.TimerThread.mainLoop(Timer.java:483)
            - locked <0x12869c58> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)- Then near the end, the "locked <0x10c51da0>" in the "ProgressBarThread" changed to "locked <0x10b01da0>", then to "locked <0x10c51da0>".
    Hope that helps,
    K.

  • Distance-sensitive Wired Connection Issue

    My 2009 Macbook Pro (Snow Leopard) seems to have a distance-related connection issue for wired Ethernet connections. I can connect the MBP directly to my router and have no problems. I have problems, however, when trying to connect to some outlets connected to longer cable (CAT5) runs. Other computers, both Macs and PCs, can connect fine to the same outlet. The Network Diagnostic for the MBP shows "No Cable Connected". With respect to the Linksys router, it either shows no lights for the connected outlet or sometimes shows all three lights blinking on and off simultaneously (a normal connection shows two lights continuously on and a blinking third activity light). I can connect the MBP to some ethernet outlets, most (but not all) of these have somewhat shorter cable runs (my best guess is that no run in the house exceeds 200 feet).
    I have tried all the usual suggestions: toggling the router power, manually configuring ethernet, deleting and adding the ethernet connection, etc.
    I have gone to the Apple Store and, no surprises, everything works fine. I am posting to see if anyone has any Ethernet settings suggestions or can direct me to a way of somehow measuring the signal level on the non-working outlets.

    I have seen some weird things happen with newer Mac hardware and older Cat5 cables, even those that work with other hardware. Are you sure that those other wired connections are at maximum speed?
    The best thing to do often seems to use a new Cat6 ethernet cable.

  • Resolve a Wi-Fi connection issue when waking from sleep

    Hi,
    In the recent release for Mac OS X Lion 10.7.3 "Resolving a Wi-Fi connection issue when waking from sleep" was supposed to be resolved, not so at my end. Has anyone else encountered the same issue and if so will there be a resolve.
    Thank you

    Hello BGreg and thank you for your answer,
    I have alreadty read about this solution, and tried it.
    I downloaded the 1.2 Go file, and applied it. And repaired permissions.
    Everything went fine.
    Unfortunately, it didn't solve the problem.
    Meaning that when iMac wakes up, it doen't join my WiFi network.
    I have to do it manually.
    I don't know what to do : it is very strange because I never had that problem with OS 10.7.2 !
    And my network setup has never changed.
    another info :
    I noticed that in the network setup screen, when I want to close the little lock to restrain further modifications, it won't close. Weird !
    Do you think I should call Apple Assistance ?

  • HP PhotoSmart 7510 suddenly has severe connectivity issues

    I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
    But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
    It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
    I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
    I tried the following steps from one of the threads:
    1. Restore the Network defaults
    2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
    3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
    4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
    5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
    6. Try enabling Web Services.
    I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
    It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
    So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
    I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
    Thanks a lot!

    I can assure you that it is not a router issue.  It appears to me that it is a driver compatibility with Windows OS.  After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.  
    The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch).  But that leaves us 32-bit people stuck with the current driver which does not work.
    The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made).  The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue.  However, the affected computer fails pings by either request timed out, or destination host unreachable.  Pings are successful from the affected computer to any other device on the network.  The only way to recover (at least for a few days) is to reboot the affected computer.
    Also, from the display on the 7525, the network tests pass without issue.  I can also download and print content from the internet with no issues.  
    Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request.  This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...).  I agree with several other customers that HP should be on the hook for this fix.  I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
    Thank you in advance for escalating this issue to product engineering,
    S. Hunn
    There are 10 kinds of people in this world... Those who understand binary and those who do not.

  • Connection doctor and connection issues

    I have nothing blocking  my internet connection, however mail is a nightmare for me. I continually receive connection issues via the connection doctor for imaps, pops, and icloud.
    Are my settings wrong? I have checked with each of the settings and they are set per instructions provided. Some are google, some yahoo, icloud, etc.
    This is really annoying and I could really use some help.
    Here is a typical message: Could not connect to this Google IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, deselect the 'Use SSL" checkbox in the Advanced tab of Account Preference"
    I have done all of this and am still having troubles.
    I am also receiving SMTP connection issues - "Trying to log into this SMTP account failed. Verufy that the username and password are correct."
    I have checked and all are correct. Even more confusing, these issues are not present all the time - however I have not changed anything between when times are good and bad.
    Sigh - I hope someone has an idea to help me out.
    Thanks in advance for your time and thoughts.
    Patti
    I am running osx 10.8 mail 6.2 and use xfinity for my internet (as I mentioned, I disabled their firewall trying to fix this)

    Hi there Japps1,
    You may find the troubleshooting steps in the article below helpful.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    -Griff W.

  • Excel ODBC Connection Issues

    I'm having some issues importing external data from an Oracle 9i database.
    Here is what is happening:
    I am initially able to import data from the table I want to into Excel.
    I do this through "Data -> Import External Data -> New Database Query" where I have my .ORA data source. I'm able to log in using my user and password and import the table. My problems come after I import this first set of data.
    If I try to "Edit Query…" I get an error box that says "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
    If I try to "Refresh Data" I get two error boxes. The first is just: "[Microsoft][ODBC driver for Oracle][Oracle]" and the next says: "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed". It then prompts me for the User name and password of the DB I'm connecting and after I enter the information, I get the same two error messages.
    Also, if I attempt to establish another connection following the "Data -> Import External Data…" steps I run into a different problem. Upon entering the information for the User Name and password prompt I get two error messages. One says "!" and the next box says "Couldn't read this file". Once I click "OK" in those boxes, the Microsoft Query window automatically opens with nothing in it.
    I can't seem to figure out why I can initially pull down data and then cannot succeed afterwards. I'm unable to connect to the DB I have through Excel until I completely closed all Microsoft Excel instances.
    I also use this data source in Microsoft Access without any problems.
    My Excel version is 2003.
    I'm using Oracle Drivers I'm using are from an "Instant Client" package.
    Any thoughts why I'm having these connections issues?
    Thanks in advance.

    This issue is closed.
    The solution was:
    "Data -> Import External Data -> Import Data"
    Select "New Source" and select the "Oracle" data source and filled in the appropriate information. This was similar to the database query but it actually works.

  • My brand new mac pro always had Internet connection issues at school. WHY is that? I see the school's Internet working perfectly fine on other PC's, but there is never a day where my mac doesn't have Internet connection issues at school. How do I fix it?

    I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in class I always sit at. It's ridiculous and it's frustrating. I invested my money into this laptop and I'm beginning to regret it. I thought it was the school's Internet, but I don't see Internet issues with other PC users. It's most frustrating on registration days and I'm trying to register for my classes before it gets taken, but again... Internet connection issues. It's random. Majority of the time, it doesn't work at all. I've done Network Diagnosis and turning WiFi off then turning it on again. I've done everything I could. I put my money on this laptop and it was a lot of money. I could have bought an 800 dollars laptop and I would have Internet connection anywhere on campus. So, I don't want to continue everyday to regret on buying this laptop every time I try to connect to the Internet at school or Starbucks or anywhere else. How do I fix this? What's the problem ?
    At school, I heard this guy had a problem with Internet connections too and he owned a new mac book pro. He said something like Apple messed up on something, but he fixed it. If I knew mac book pro's had these issues I wouldn't have bought it in the first place. It's freezing on me every other day. It's ridiculous. But what concerns me the most is the Internet connection. So someone please tell me what can I do next to prevent the problem? Am I doing something wrong maybe?

    Hi Kevin,
    I'm using an XLR input mic which is connected to the phantom power enabled XLR mic socket on a USB M-Audio M-Track. The M-Track is connected by USB to the Mac Pro - so effectively I've got an M-Audio USB soundcard with a mic input.  I've also tried a microphone that is a straight XLR to USB cable (guessing with some soundcard chip buried in the usb plug) but that also yields the same effect of bad latency, intermittent quality, stuttering and repeating and echoing (without the speakers on during record so its not feedback).
    The mic works absolutely fine with other recording applications I have on the mac at the moment - albeit non-adobe ones (tested it on the EasyAudioRecorder - and it lives up to its name. it's easy)
    I will try with Audition and report back, but sitting here right now I can imagine it would work fine with audition too - it just seems to be the way premiere is set up for recording into the timeline is a bit sketchy.  I'm willing to accept it might well be a quirk with the new Mac Pro trashcan - I'm not weighting all the woes on premiere.
    Any thoughts or am I out of luck to sit with my fingers crossed for a fix in the next round of updates?
    Nathan.

Maybe you are looking for