Weird copy problem

I'm trying to copy a file from the iMac to the MacBookPro. I mount the MacBook Pro without problems. I can see all the files. When I drag a file from the iMac to the MacBook Pro it askes me for my password (this started with Mountain Lion). Strange. So I put the password. Then it pops a message saying that "A newer item named “xxxx.xxx” already exists in this location. Do you want to replace it with the older one you’re moving?"
But there's no such file there! If I click Replace of Keep Both then it goes in a loop and copies the file non-stop. I have to relauch the finder to stop it.
Now If I want to do the opposite, copy from the MacBook Pro to the iMac everything is ok.
Any idea?
Thanks,
Robert

By the way, it does that for any folder I want to copy to, even the public folder.

Similar Messages

Weird copying problem

I keep a copies of certain files and directories on an external Firewire 800 drive. This afternoon I was trying to copy my iPhoto Library from the backup to my main drive and kept getting this message:
"The alias "iPhoto Library" cannot be copied to the destination, perhaps because the destination does not support this type of alias."
This is a little puzzling as I am not aware that this is an aliased file. Can anyone help me out??

Search the library for aliases; for each one located, navigate to the folder containing it with the Finder's Go to Folder command in the Go menu. Select it in the Finder, choose Get Info from the File menu, and find the original item listed, and navigate to it. If this item is an alias, find its original and put it where the alias currently is.
(43182)

Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
I hope someone is ably to help me ?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

'copy' problem ade 4

'copy' problem with ade 4
copy with edit [copy function greyed out] or manual [ctrl+c - even in right sequence] not working on ade publication 'Nuwe Testament en Psalms
’n Direkte Vertaling'
the copy function does work on 'Getting Started With ADOBE DIGITAL EDITIONS 4.0', a book which is part of the program
pc specs are more than adequate
urgent help needed here
thank you!
in Christ
gabriel

hi dominic
yes, i can do that with this document to
   1. with the copy function from the file tab
   2. by selecting text and right click
   3. manually with ctrl+c
my problem is with the other publication, 'Nuwe Testament en Psalms'n
Direkte Vertaling', there the copy option in the file tab is greyed out and
manually it does nothing - none of the three copy methods work.
pse see attached jpg
from gabriël smita child of the Living God through Christ Jesus[?]
South Africa
*0823260759"So faith comes by hearing, and hearing by the word of Christ."
<https://mlj-sermons-mp3-tagged.s3.amazonaws.com/Romans/3260D.mp3>Rom 10:17*
*https://www.facebook.com/ggsmit <https://www.facebook.com/ggsmit>bugged by
cockroaches? <http://www.ecozap.co.za>bugged by ants?
<http://www.cockroaches.co.za/killing_ants.pdf> *

Weird audio problem during calls

I have a weird audio problem and was wondering if anyone else has had a similar problem or could help...
My wife and I both have iPhone 5's and sometimes (not all the time) when she calls me (or I call her), it connects, but no matter which audio input I choose (phone, bluetooth, speaker, headphones), I cannot hear her, but she can hear me... I hang up, call back (and when I call, there is no dialing sound, nor any other phone sounds) and it's the same thing. Sometimes restarting the phone works, other times I have to restart it 3-4 times before it'll work again. I try different things during these calls, like turning on/off bluetooth and/or wifi (pretty much anything I can think of that would make a difference), but nothing seems to help.
The (other) weird part is that after the last time of this happening, I tried calling my iPhone with my office phone and it worked fine, so then I immediately call my wife back with my iPhone and it was doing the same thing again. I called her back using my office phone and could talk to her fine...
This problem has been going on for a few months now and I have tried restoring the phone a couple times (and I am on the latest iOS) and sadly, that hasn't done anything to help... Does anyone have any ideas what is going on? I'd make an appointment for the problem, but since it doesn't do it all the time, I don't know what good it would do... But it is getting very frustrating!
Thanks for any help!
-Jason

Thanks for the response! It happened again yesterday... It seems to be happening more frequently in the past few weeks now.
I checked the link and have tried all of the things listed at one point or another over the past few months. I did just check my Carrier settings and it said it had updated (it's on 14.1), but I am not sure when that happened (could have been today, could have been after my last restore last week, not sure). I'll keep my fingers crossed that maybe that fixed it...
If it continues to act up, would you recommend that I bring the phone in to an Apple store or an AT&T store? I bought the phone through Apple, but my carrier is AT&T (and if you suspect that the problem may be with the cellular conection), maybe the AT&T store would be the better choice?
I really wish the problem would be more consistant or go away, cause trying to get the problem solved is driving me crazy!

Slooow internet and weird mouse problems?

I recently upgraded my iMac to Leopard (10.5.4) and started having weird mouse problems. At start up, mouse would be frozen in upper left corner. I'd restart, switch mice, restart, over and over. I use a Wacom tablet w cordless mouse plus Apples alum cordless keyboard. Eventually I tried switching USB ports for my Wacom tablet and the mouse was OK. I have learned that when this problem occurs, I need to shut down and unplug everything. That seems to solve it. Anyone know why? ALSO, ever since upgrading I have found the Internet to be appallingly slow. I have 2 GB memory and just upped my internet speed (supposedly) through Embarq.

hmm, what is a mouse usb or a keyboard usb?
arent all the usb ports same?
I really wish to show you how this happens it is really fun, but also annoying. especially when I am playing a game. it is interesting to watch the screen when suddenly all the world starts rotating when you are playing a first person shot'm up.

KT6V Weird boot problems

Hi..
I'm having this weird boot problem (and no it doesn't seem to be the standard one)
OK..
I have the following :
AMD Athlon 2000+
KT6V LSR mainboard
2x 256 Crucial PC2700 memory
IDE Hard Disk (120gb segate)
Creative 5700ultra Graphics card (AGP)
Cd Rom
Chieftec 400w PSU
WinXP Pro
If I set my CPU FSB to 100mhz (everything else on auto).. win Xp pro boots fine and all is pretty good except that my chip is now seen as a lowly 1.25ghz..
If I then set my CPU FSB to 133 or 166 then the machine boots (ie it beeps etc..).. starts to load windows xp (I get the logo and that's when the problem happens) and either black screens (ie.. nothing and the monitor turns off) or blue screens with the windows message saying that windows has detected a hardware fault and has halted the system..
I know my memory, chip, heatsink etc all work because just over an hour ago they all worked fine in my KT3 ultra.
What is going on as I've tried almost everything to try and solve this, with the only option to set the FSb to 100mhz which is incorrect for my CPU.
How do I fix this.
I've looked through the forum but this is not the same problem as simple reboots.. this is weird.
If I can't fix this then I guess it'll be send it back.. which is a shame because I like MSi motherboards.
Thanks
Slippery

Hi..
I've checked the CPU heatsink.. and nothings wrong !
(Can't check the voltage but I know the PSU is Ok as I did run it in a custom case with 4 Cd writters, 4 HDs, loads of lights etc.. before I moved to this new plain case tonight)
What's weird is that set at 100FSb it's fine but at 133 or 166 it just crashes after the loading XP logo is displayed. Up until that point it's all fine.
But why does it run Ok at 100mhz and not 133mhz ?
Please help.. before I end up fixing this with a hammer !
Thanks
Slippery

Weird File-copying problem

This problem is only happening on one computer on the network. When copying some files to the Mac server, they do not fully copy. Then, when we try to delete the file on the server, it responds that the file is "in use".
Wiring ruled out as the issue.
***?

Hi nogeeks, and a warm welcome to the forums!
Not much to go on, but one thing to check...
In finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1, and reboot.

Weird Javascript problem on Safari and other web browsers

Hello,
this is actually pretty weird. For the past several weeks I have been dealing with a very strange problem which I believe relates to JavaScript. To be more specific I have an issue with two websites: Macuser.gr and Facebook.com.
As far as Macuser.gr is concerned this is how it's supposed to look:
http://f.cl.ly/items/0j1J123Y2D0t1C2U3b1f/Screen%20Shot%202013-02-06%20at%202.25 .04%20PM.jpg
and this is how Safari renders it:
http://f.cl.ly/items/3N0V3I1c0Q0a1r0K0e1C/Screen%20Shot%202013-02-06%20at%202.25 .40%20PM.jpg
The problem is with the preview images as you can see.
Now, in Facebook there's this annoying white line where it isn't supposed to be:
http://f.cl.ly/items/0k0i2c0T0q1h3t2j2s3e/Screen%20Shot%202013-02-06%20at%202.25 .52%20PM.jpg
I have tried and tested everything (Guest user, different browsers etc) and all it comes down to is JavaScript. Disabling Javascript seems to fix everything immediately. Enabling it again and this mess occurs. Also, this happens with the latest versions of Safari, Chrome and Firefox BUT not with Camino 2.1.2 although it has JavaScript enabled in it.
This is really frustrating and it appeared out of the blue one day. I did not have this problem from day 1. Any ideas?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, reboot as usual and post the results.

Itunes and cd copying problem

hey guys
just wondering if anyone has had similar problems to me...
when i put an audio cd in my cd drive (real cds), and try to copy, sometimes on a particular track it gets stuck, and after it gets stuck the cd drive keeps spinning and stopping, then spinning and stopping (etc)... if i try to close itunes it goes into the spinning rainbow and it wont close... usually i have to force quit it, but that doesn't stop the cd from spinning... i then have to either put it to sleep and hope the cd stops spinning, or i have to force a shutdown and turn it back on...
if i try it again the track does it again... i can copy all the other songs but that one... i dont know if it happens to be that the cd is scratched or something (because the cds i tried to copy i guess arent the BEST condition, but not scratched in a way that wouldnt work on my pc)...
oh.. actually i just spammed my eject button after force quitting itunes and my cd popped out... bu yeah.. anyone know anything about this? had similar problems or know how i can possibly fix it?
its happened to two of my cds, and ive copied over about.. hm... 5 cds? any help would be mucho appreciated!

A good thing to try is to take the same cd's into an apple retail store and attempt the same "rip" there.
If they encounter the same issue then you know where the problem lies, but if all goes well at the store then you've got more work to do.
Try playing back the same tracks on your computer to see if there's any skipping when they're played.
It could be something relating to iTunes, so it may help to try the rip in another user account.
If it happens in two accounts it might be worth it to attempt a PRAM reset, as I've used it to clear up some weird optical drive issues in the past, but try things in the order I've listed and hopefully you get somewhere.
PRAM reset: http://docs.info.apple.com/article.html?artnum=2238

E1200 weird connection problem

Recently I got a brand new E1200 from the Cisco store to replace Apple Extreme Base station for my home wireless network. The router deployed just fine except one weird problem. While all devices (desktops, laptops, cell phones, iPad) can access the router, one desktop (Dell Optiplex DX280) cannot see the router at all. The router network, even with default SSID, does not even show in the wireless network list, no matter how many times the list is refreshed. The wireless adapter (Dell TrueMobile 1800 USB2.0) is fine, since it picks up the router SSID when connected to another desktop. The stubborn desktop works just fine with previous Apple router and can see many networks around, like neighbors' networks. Thinking that some other previously installed software interferes with seeing the router SSID, I completely wiped and reformatted HD and reinstalled fresh copy of WinXP - still the same result, the dektop works just fine with the Apple router, but still cannot see E1200 SSID. The router was reset to factory defaults and all access restrictions were removed. While all the devices see the default SSID and can conncet to the router with no problems, the stubborn desktop keepcompletely ignoring it. Any ideas what may be the problem?

It is SP3, and there was no error message. SSID just was not showing up in list of available networks on Optiplex desktop. As I found later, just by chance in contrast to getiing answer straight from Dell, it was a driver issue. Optiplex desktop was equipped with older driver, 1.5.0.1 or so, a while ago because this is what was recommended (and continues to be recommended!) at Dell's site for the supplied service tag. It was working just fine with Apple router. On the other hand, the Compaq desktop, which was picking up routher's SSID normally with the same USB adaptor, somehow had loaded a newer version, 3.3 something, from the internet. When the older driver was installed from the Dell website, Compaq lost all wireless capabilities. So when I just upgraded driver from within WinXP Device Manager, the newer version was installed and the missing SSID has immediately shown up in Optiplex' wireless network list. I wish that Dell suooprt and site was better organized, but it is as bad as jungle and Tech Support asks a lot of irrelevant questions wasting their and my time and getting nowhere.

Array Copy Problem

ARRAY COPY DOESN'T WORK. DO NOT ATTEMPT TO USE IT IN YOUR REPLY TO THIS TOPIC. array copy says that you need the same type of object in the arrays. I'm making a method in a class called SUPERARRAYUTIL where this isn't the case. They all extend from a class i made called SUPERARRAY (in javacase caps tho, i just like to use upper case), but that doesnt help me. I'm short on time and i want to post this right now, so i won have any code right away but here is how i'm gonna do it:
1) Static method takes parameters superArray array, superArray newelements, and int start
2) Make a temp array that would be big enough to fit array, and the newelements at postion start in array
3) copy over array using a for loop, starting at 0 in temp.
4) copy over newelements using a for loop, starting at start in temp.
Then i will make non-static methods for superArrayUtil that will use the static methods in superArrayUtil. I will also make a method like System.arraycopy but will call a method called cut to trim the array of new elements and then call this arraycopy to copy it into the dest array, and then another non-static method for that method too.
Basically i just need ideas or comments cause so far i ran into some weird problems or any suggestions if there's a better way to copy arrays in the general way of array1 into array2 at a starting position.

Deo_Favente wrote:
ARRAY COPY DOESN'T WORK.
YES. YES IT DOES. WHY DO YOU THINK THAT IT DOESNT WORK? WHY DON'T YOU POST WHATEVER CODE THAT YOU DO HAVE THAT IS CAUSING YOU PROBLEMS AND THEN MAYBE WE COULD WORK WITH IT. I THINK THAT'S A BETTER IDEA PERSONALLY, AT LEAST OPPOSED TO WHAT YOU DID HERE._+

N82 v 20.0.062 RM-313 WEIRD BROWSER PROBLEMS WITH ...

Watching videos on youtube via standard built-in nokia browser worked flawlessly on my nokia N82 black. Right out of the box I could watch standard desktop version of youtube webpage and play any video
BUT ... suddenly (and I have no idea what has caused this) it stopped working and it doesn't work anymore after hard reset (*#7370*) and even after reflashing firmware.
1)
First of all the main youtube webpage looks weird right at the start - the logo YOUTUBE on the top of the page looks as if it had 16 colours (you can obviously see something isn't right with the browser - but this happenes only on youtube webpage)
2)
When you click any video it will either
A) crash the browser or
B) whole page will load except the video (the area where the video is supposed to be will stay blank)
Any idea what might be causing this? Anyone else having these issues?
Message Edited by linham on 06-Jul-2008 12:24 PM

as you said you even reinstalled your software? bet you also did a backup and restored it?
if you did you also "replaced" the problem after the software update
what i suggest and it is a long process
1.save all your data...not using the pc suite backup but rather connecting via mass mode and drag and drop the files from your phone to your desktop
2.hopefully the applications you have installed you have saved on your pc as .sis files? i ask because i usually suggest that you format your memory card after all your data is from from it....its not a must but suggestable
3.PLEASE remember to save your contacts to sim!!!! or better yet, copy them to memory card,use pc suite mode and you'll find a folder on the memory card named "other" the contacts you just copied will be there...drag that folder to your desktop
try this method(drag and drop to desktop) and then reinstall your software...replace your files and see if the browser works again
let me know what happens

File data copying problem

Hi,
Im trying to copy the contents fron one file(say abc.txt) to another file(say def.txt)....Whats wrong in the below code...
package com.home.practise.streams;
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
public class CopyOneFileToAnotherFile {
     CopyOneFileToAnotherFile() throws IOException {
          File file = new File("C:\\Documents and Settings\\Harishwar\\Desktop\\abc.txt");
          try {
               BufferedReader br = new BufferedReader(new FileReader(file));
               FileWriter fw = new FileWriter(new File("C:\\Documents and Settings\\Harishwar\\Desktop\\def.txt"));
               BufferedWriter bw = new BufferedWriter(fw);
               int ch;
               while((ch = br.read()) != -1){
                    bw.write((char)ch);
                    System.out.print((char)ch);
          } catch (FileNotFoundException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
     public static void main(String[] args) throws IOException {
          new CopyOneFileToAnotherFile();
}Im not getting the output inside the file "def.txt"...why so?? what might be the problem in the above code??

Thanks for your reply, dudes...Now I got the output..But i had one small doubt..Why these java soft people didnt write flush() method in predefined streams or readers or writers( say BufferedWriter or some other output stream).Because they're buffered. If they were auto-flushed they wouldn't be buffered.
Why they gave us a choice to write this flush() expilictly....?So that you can control when the buffer is flushed. For performance and transactional reasons.
Why wouldn't they have written in these predefined classes(say BufferedWriter) itself?? Because then they wouldn't be buffered. So there wouldn't be any point in them existing, or at least in having those names.
And another small doubt, when we write explicitly bw.close(), does this mean we are saying GC to collect this variable?No, it means flush and close the stream and release the associated file handle.
Can't GC collect this variable after complete execution of this program?Of course, but it's a file writer with a local buffer, so you should close it yourself, explicitly, when you have finished writing to it, so that you know that you've flushed and closed it, so that your application doesn't proceed on a false assumption, for example so you don't print any misleading messages saying that you've written all the data when you haven't.
If you don't want local buffering, don't use it. But then your tactic of reading and writing one character at a time is suddenly going to run several orders of magnitude more slowly. And it's still correct discipline to dispose of external resources immediately you've finished with them.

Weird mouse problem (clicks not being performed, -)

Recently I am suffering from a really weird problem.
The middle mouse button shows a really strange behaviour:
I'm using KDE from [extra], and middle clicking e.g. a link in a webbrowser (no matter which toolkit it uses) instead of opening one tab, opens the link in several tabs.
Also middle clicking on a tab, normally should close *one* tab, while here it often closes more than one tab. Since this happens in every application I use, no matter which toolkit is used, this cannot be a KDE/Qt problem, since e.g. Firefox is affected by it too. I also doubt that GTK is the cause of this problem…
[The middle clicking problem has been solved, by cleaning the mouse wheel]
[The problem below, still persists]
Furthermore, sometimes my laptop looks like it enters a "state", where my clicks are not "performed" the normal way:
E.g. I had a media player running, when my laptop got into this "state". No matter where I clicked on this app, the clicking action was performed on the Play button. Using Alt+Tab to focus another window/bring it to the front, and clicking in this window anywhere again resulted in the Play button getting clicked.
After quitting the media player app (through a keyboard shortcut) my clicks still did not work normal. They still simply were not performed. In order to "re-gain" the ability to click, I had to log out first.
Since I've setup my Arch Linux not to automatically start X/KDM after logging out, I found myself in the terminal, where I ran startx, in order to run KDE.
The terminal still had some output of my X session, but it wasn't displayed with normal characters, but rather with some weird characters, looking all scrambled and stuff, as you can see on the screenshot. http://imagebin.org/100067
I currently use the packages from the testing repo, but IIRC this behaviour was there even before installing the testing repo packages.
Extra information:
kernel26 2.6.34-1
xorg-server 1.8.1-1
nvidia 195.36.24-2
xf86-input-evdev 2.4.0-1
I run Arch Linux x86_64 on an Acer 5741G Laptop, with a NVidia Geforce GT 320M.
Interestingly, another user who suffers from the same bug is running a computer with intel graphics, so it probably is not the nvidia driver causing the problem either.
Originally the bug was reported as a rekonq bug: https://bugs.kde.org/show_bug.cgi?id=238987
Thank you
Last edited by pano (2010-06-09 11:43:21)

Hello,
I seem to suffer from the same problem. Sometimes (perhaps triggered by amarok, but I have to investigate this further before blaming this app) the left mouse button stops working. I can not perform left-klicks anymore. Everything is fine with the right button. If I log out and in again the mouse if fully back. In this loop X has not been restarted.
My setup:
KDE 4.4.5 (official packages)
X: X.Org X Server 1.8.1.902 (1.8.2 RC 2)
kernel: 2.6.34-ARCH #1 SMP PREEMPT
architecture: x86_64
mouse: Logitech MX1000 Laser (Logitech, Inc. MX-1000 Cordless Mouse Receiver)
If s.o. will ever work in this I will be happy to provide any information I can come up with.
Cheers and good night.

Weird copy problem

Similar Messages

Maybe you are looking for