Weird Drive issue......
I just installed 2 brand new LG GH22LP20 dvd burners in my Mac Pro. They r both set to CS(cable select) I installed PAtchburn. They both open with their respective eject buttons(top/eject, bottom/option-eject) The problem is they have the same weird name in Toast(Hl-dt-st-DVD-RAM GH22LP20) Like I said they are the exact same name. So Toast will burn on both drives separately but I cant burn something else with DVD Studio Pro on the other drive while Toast is using the 1 drive. I have done this many times with my previous drives. DVD Studio Pro first says that the drive is in use(I selected the other drive that was not in use) Then if I hit burn again, it will eject the right drive and says to insert acceptable DVD recordable media???? Now the media is the same media Toast is using with no problem. Do you think this is a problem because they are named the same??? Is this a problem with the drive and DVD Studio Pro??? I will appreciate any input. Thanks
A properly written program looks at the device name (ie: /dev/dvd0) and not the name you see displayed. That's why you can give hard drives the same name while the computer distinguishes them with no problem. It sounds like DVD Studio Pro has a problem.
Similar Messages
-
Weird Driver swap issue since 10.4.10 install
hey all hows it going.
i have a weird issue that i believe is a video driver issue. im actually a system administrator for a company so this is kind of fustrating not knowing how to fix something, so i turn to you guys!
ok so i have a imac g5 17" pc i've had since around 2003-4 now.. and the issue is that the display keeps alternating between 800X600 to the proper native resolution by itself randomly.
i have done a re-install of osx 10.4 and repatched to no avail, i have repaired permissions to the disc, i have started osx in safe mode and got it to rebuild the basic windows.preferences.plist file to no avail.
and then i noticed something. the specs on my mac had changed slightly since the 10.4.10 upgrade. i have not made any upgrade changes.
basically, this should be the video card according to apple and my receipt
Graphics NVIDIA GeForce FX 5200 Ultra with 64MB DDR
SDRAM with AGP 8X support
from the website
http://support.apple.com/specs/imac/iMac_G5.html
looking on my "about my mac" "more.." section it states
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: AGP
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-xxxxx-117
Displays:
err.. what the? i believe this COULD be the issue, no?
so my question is, how in the world could this happen and how do i change it back or change the video driver ? please help asap!Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.4.6 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE -
I have this weird playback issue with iTunes for Windows. I am using Vista and I think the cause of the problem is that I am using MacDrive to access my OS X partition. But anyways, on with the problem. So the problem is that when I play a song, the song will play for like 5 seconds and then it will just go the next song. This song will do the same thing, and so-on and so-forth. Then, during this time, my Mac formatted hard drive is unavailable while iTunes is running. In "My Computer" the drive is there, but when I try to open it, Explorer freezes. Then, when I exit iTunes, it doesn't really exit. It still shows up in the task manager and when I try to end the process, it just plain doesn't end. I have to restart my computer to gain full use of it again. After the restart I can access my Mac disks, but once I start iTunes and try to play a song, I get the same thing again. And in case thats not weird enough, I can play the MP3's in WMP fine, and they will also play in iTunes fine if I actually open them, rather than just select them from my library. If I go to file open and select a song on my Mac drive, it will play fine, but then once I try to play a song from my library, I get caught in that vicious cycle. Anyone else had this problem or anything? Thanks. Also, is there an alternative program to Mac Drive that will allow me to read HFS partitions?
Post more about your situation... what format is the video, and where are you storing the video files? i.e., on a disk other than your startup disk? The adobe install is likely not the problem... I run adobe software along side FCS on about 75 workstations, and don't see issues like you describe.
Wavy? not accurate? what are you talking about?
Jerry -
HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit
Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
30EA3- 2.*: Weird performance issues for editing objects
Hi,
I noticed weird performance issues for editing objects: when right-clicking on them in the navigator tree and selecting Edit, you get the old progress dialog "Connected to database XXX". This stays on screen a lot longer than it ever did (last sequence I edited over 30 seconds!).
Cancelling displays a "Error retrieving schemas" dialog, but then opens the Edit dialog correctly. No further side effects noticed, so I think sqldev is adding useless overhead here.
If confirmed, can this be bugged and/or fixed by production?
Thanks,
K.Yes, I mean in context of other hangs reported. This one is a nasty performance issue, but IMO the others are real show stoppers.
Atomic steps are easy; any* Edit (object) action inside the context menu of the navigator or the Edit button of the object viewer.
I took a lot of dumps (every second or so) and came to these findings:
Full thread dump Java HotSpot(TM) Client VM (14.2-b01 mixed mode):
"ProgressBarThread" prio=6 tid=0x049de000 nid=0x1674 runnable [0x056ff000]
java.lang.Thread.State: RUNNABLE
at oracle.jdbc.driver.T2CStatement.t2cDefineFetch(Native Method)
at oracle.jdbc.driver.T2CPreparedStatement.doDefineFetch(T2CPreparedStatement.java:818)
at oracle.jdbc.driver.T2CPreparedStatement.executeForRows(T2CPreparedStatement.java:746)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1100)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3425)
- locked <0x1828f7f0> (a oracle.jdbc.driver.T2CConnection)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1202)
at oracle.javatools.db.execute.QueryWrapper.executeQueryImpl(QueryWrapper.java:280)
at oracle.javatools.db.execute.QueryWrapper.access$000(QueryWrapper.java:76)
at oracle.javatools.db.execute.QueryWrapper$QueryExecutionRunnable.runImpl(QueryWrapper.java:390)
- locked <0x1828f7f0> (a oracle.jdbc.driver.T2CConnection)
at oracle.javatools.db.execute.StatementWrapper$ExecutionRunnable.run(StatementWrapper.java:692)
- locked <0x10c504c0> (a oracle.javatools.db.execute.QueryWrapper$QueryExecutionRunnable)
at oracle.ideimpl.db.ProgressBarExecutionWrapper.runAndLog(ProgressBarExecutionWrapper.java:136)
at oracle.ideimpl.db.ProgressBarExecutionWrapper.access$000(ProgressBarExecutionWrapper.java:38)
at oracle.ideimpl.db.ProgressBarExecutionWrapper$R.run(ProgressBarExecutionWrapper.java:180)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:619)
"pool-2-thread-2" prio=6 tid=0x06795400 nid=0xa58 waiting on condition [0x073ef000]
java.lang.Thread.State: TIMED_WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x131fded0> (a java.util.concurrent.SynchronousQueue$TransferStack)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:424)
at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:323)
at java.util.concurrent.SynchronousQueue.poll(SynchronousQueue.java:874)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:945)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
"pool-4-thread-1" prio=6 tid=0x06654400 nid=0xa08 waiting on condition [0x05dff000]
java.lang.Thread.State: TIMED_WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x18334e28> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:1963)
at java.util.concurrent.DelayQueue.take(DelayQueue.java:164)
at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:583)
at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:576)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
"WeakDataReference polling" prio=2 tid=0x064de800 nid=0xc58 in Object.wait() [0x0eb3f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x18335088> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at oracle.ide.util.WeakDataReference$Cleaner.run(WeakDataReference.java:88)
at java.lang.Thread.run(Thread.java:619)
"Background Parser" prio=6 tid=0x04decc00 nid=0x1248 waiting on condition [0x0ea3f000]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
at java.lang.Thread.run(Thread.java:619)
"IconOverlayTracker Timer" prio=6 tid=0x063e5400 nid=0x16fc in Object.wait() [0x076ef000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x180c2840> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"WaitCursor-Timer" prio=6 tid=0x04e39c00 nid=0x910 in Object.wait() [0x074ef000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x1792d840> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Native Directory Watcher" prio=2 tid=0x04e38400 nid=0x12b8 runnable [0x062ef000]
java.lang.Thread.State: RUNNABLE
at oracle.ide.natives.NativeHandler.enterWatcherThread(Native Method)
at oracle.ide.natives.NativeHandler$2.run(NativeHandler.java:252)
at java.lang.Thread.run(Thread.java:619)
"Background Parser" prio=6 tid=0x04d86c00 nid=0x12ac waiting on condition [0x061af000]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
at java.lang.Thread.run(Thread.java:619)
"Background Parser" prio=6 tid=0x04d82800 nid=0x1240 waiting on condition [0x05eff000]
java.lang.Thread.State: TIMED_WAITING (sleeping)
at java.lang.Thread.sleep(Native Method)
at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:112)
at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
at java.lang.Thread.run(Thread.java:619)
"TextBufferScavenger" prio=6 tid=0x04d81400 nid=0x10ec in Object.wait() [0x05cff000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x1729c0a8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x1729c0a8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at oracle.ide.model.TextNode$FacadeBufferReference$PollingThread.run(TextNode.java:1949)
"BaseTreeExplorer.NodeOpeningExecutor" prio=6 tid=0x04ba0400 nid=0x11bc waiting on condition [0x05aff000]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x131a1910> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
"pool-2-thread-1" prio=6 tid=0x04c1c400 nid=0x11b8 waiting on condition [0x059ff000]
java.lang.Thread.State: TIMED_WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x131fded0> (a java.util.concurrent.SynchronousQueue$TransferStack)
at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:424)
at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:323)
at java.util.concurrent.SynchronousQueue.poll(SynchronousQueue.java:874)
at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:945)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
"Scheduler" daemon prio=6 tid=0x04b9a800 nid=0x11b0 in Object.wait() [0x058ff000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at oracle.dbtools.raptor.backgroundTask.TaskLinkedList.takeNextTask(TaskLinkedList.java:47)
- locked <0x131a1ba0> (a oracle.dbtools.raptor.backgroundTask.TaskLinkedList)
at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$SchedulerThread.run(RaptorTaskManager.java:422)
"TimerQueue" daemon prio=6 tid=0x0445b000 nid=0x10fc in Object.wait() [0x057ff000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at javax.swing.TimerQueue.run(TimerQueue.java:236)
- locked <0x12f7c028> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:619)
"ChangeSetService" prio=2 tid=0x049d0800 nid=0x1060 in Object.wait() [0x053ff000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x12e140c8> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
at java.lang.Object.wait(Object.java:485)
at oracle.jdevimpl.vcs.changeset.ChangeSetService.awaitEvents(ChangeSetService.java:178)
- locked <0x12e140c8> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
at oracle.jdevimpl.vcs.changeset.ChangeSetService.eventLoop(ChangeSetService.java:199)
at oracle.jdevimpl.vcs.changeset.ChangeSetService.access$200(ChangeSetService.java:56)
at oracle.jdevimpl.vcs.changeset.ChangeSetService$2.run(ChangeSetService.java:138)
at java.lang.Thread.run(Thread.java:619)
"TimedCache-Timer" daemon prio=6 tid=0x03af9c00 nid=0x414 in Object.wait() [0x03fdf000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0x12869c58> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"JarIndex Timer" daemon prio=6 tid=0x03945400 nid=0x171c in Object.wait() [0x042df000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:509)
- locked <0x127d85a8> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"AWT-EventQueue-0" prio=6 tid=0x030f4800 nid=0x1684 in Object.wait() [0x041de000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.awt.EventQueue.getNextEvent(EventQueue.java:479)
- locked <0x127d8658> (a java.awt.EventQueue)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:236)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1045)
at java.awt.Dialog$3.run(Dialog.java:1097)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1095)
at java.awt.Component.show(Component.java:1563)
at java.awt.Component.setVisible(Component.java:1515)
at java.awt.Window.setVisible(Window.java:841)
at java.awt.Dialog.setVisible(Dialog.java:985)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:352)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:229)
at oracle.ideimpl.db.ProgressBarExecutionWrapper.execute(ProgressBarExecutionWrapper.java:108)
at oracle.javatools.db.execute.StatementWrapper$ExecutionProxy.doExecute(StatementWrapper.java:647)
at oracle.javatools.db.execute.StatementWrapper$ExecutionProxy.access$200(StatementWrapper.java:585)
at oracle.javatools.db.execute.StatementWrapper.doExecute(StatementWrapper.java:307)
at oracle.javatools.db.execute.QueryWrapper.executeQuery(QueryWrapper.java:215)
at oracle.javatools.db.dictionary.DictionaryDatabase.listObjectsImpl(DictionaryDatabase.java:323)
at oracle.javatools.db.ora.BaseOracleDatabase.listObjectsImpl(BaseOracleDatabase.java:524)
at oracle.javatools.db.AbstractDBObjectProvider.listSchemas(AbstractDBObjectProvider.java:859)
at oracle.ide.db.dialogs.BaseDBEditorFactory.createNamespace(BaseDBEditorFactory.java:503)
at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:357)
at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:332)
at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:54)
at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:314)
at oracle.dbtools.raptor.utils.DataBaseNodeUtil.editNodeWizard(DataBaseNodeUtil.java:45)
at oracle.dbtools.raptor.oviewer.xmleditor.XMLBasedEditor.handleEvent(XMLBasedEditor.java:152)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:531)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:886)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:503)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6263)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2475)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
"AWT-Shutdown" prio=4 tid=0x030e6400 nid=0x1680 in Object.wait() [0x040df000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x127d8718> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:619)
"AWT-Windows" daemon prio=6 tid=0x03abb400 nid=0x1610 runnable [0x03edf000]
java.lang.Thread.State: RUNNABLE
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:291)
at java.lang.Thread.run(Thread.java:619)
"Java2D Disposer" daemon prio=10 tid=0x03a97400 nid=0x15f8 in Object.wait() [0x03cdf000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x127d8810> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at sun.java2d.Disposer.run(Disposer.java:125)
at java.lang.Thread.run(Thread.java:619)
"Low Memory Detector" daemon prio=6 tid=0x030d1c00 nid=0x15dc runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"CompilerThread0" daemon prio=10 tid=0x030cb800 nid=0x15d8 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Attach Listener" daemon prio=10 tid=0x030ca000 nid=0x15d4 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x030c8c00 nid=0x15d0 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=8 tid=0x030b9c00 nid=0x15c8 in Object.wait() [0x0343f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
- locked <0x12770298> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x030b5000 nid=0x15c4 in Object.wait() [0x0333f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x12770320> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x00967800 nid=0x1504 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"VM Thread" prio=10 tid=0x030b1000 nid=0x15c0 runnable
"VM Periodic Task Thread" prio=10 tid=0x030d3c00 nid=0x15e0 waiting on condition
JNI global references: 2645
Heap
def new generation total 12544K, used 6205K [0x10010000, 0x10da0000, 0x12770000)
eden space 11200K, 53% used [0x10010000, 0x105e2ff0, 0x10b00000)
from space 1344K, 18% used [0x10c50000, 0x10c8c7b8, 0x10da0000)
to space 1344K, 0% used [0x10b00000, 0x10b00000, 0x10c50000)
tenured generation total 165468K, used 99280K [0x12770000, 0x1c907000, 0x30010000)
the space 165468K, 59% used [0x12770000, 0x18864308, 0x18864400, 0x1c907000)
compacting perm gen total 50432K, used 50210K [0x30010000, 0x33150000, 0x38010000)
the space 50432K, 99% used [0x30010000, 0x33118aa8, 0x33118c00, 0x33150000)
No shared spaces configured.- In the beginning of the waiting time, the "locked <0x10c504c0>" in the "ProgressBarThread" changed (at least once) to "locked <0x10c51da0>".
- Then halfway the waiting time, the "pool-2-thread-1" disappeared, then "pool-2-thread-2" shortly after.
- Then the "TimedCache-Timer" changed to
"TimedCache-Timer" daemon prio=6 tid=0x03af9c00 nid=0x414 in Object.wait() [0x03fdf000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:485)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x12869c58> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)- Then near the end, the "locked <0x10c51da0>" in the "ProgressBarThread" changed to "locked <0x10b01da0>", then to "locked <0x10c51da0>".
Hope that helps,
K. -
hi all.
im on an older mac pro and having some weird freezing issues.
-expose 'show all' and 'minimize' tend to freeze my display mid-animation (mouse and all)
-at least once a day, usually when using RAM heavy applications, my screen will freeze, but the mouse will keep moving. i cant move anything on the screen besides the mouse. if audio is playing when the screen freezes, it keeps playing. despite the mouse seeming to work, space bar fails to stop the music. after about a minute, the mouse icon is usually replaced by the pinwheel, which spins indefinitely.
ive already:
-run the apple hardware test
-tested my RAM
-bought & run norton antivirus
but nothing has been found wrong...
any thoughts on what to try next?
a million thanks
mikeIf Disk Utility can't fix it, you'll need a more robust utility for the repair. I would recommend DiskWarrior. It is the best at directory repairs. It rebuilds then actually replaces your old directory. I feel every Mac owner should have a copy. Make sure you get the disk so you can boot up on it to run repairs. You can also install it on another drive and run it from there to repair this one. DW works faster that way.
I use DW once a month to try and catch errors in my system from getting too far out of hand.
If you have a good backup, hopefully a clone of your system before you had issues, an Erase and Install will also rid you of this issue. But, beware! You will lose everything on the drive with this procedure. Let us know if you need help with that!
Cheers! DALE
p.s. Here's a rewiew of DiskWarrior 4. -
Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).
Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false -
Very slow wine game/nouveau driver issue
Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work well on arch as well. Here is the link in the wine db. I should also add that I'm a very novice wine user so that might well be the (a) source of problem(s). Apart from the lagging, according to the sensors, the CPU's temperature rose from ~50°C to ~100°C within about A MINUTE.
I checked cpupower to see that the cpu was allowed to run at max speed and tried optirun to use the NVIDIA graphics card rather than the Intel graphics card I have installed. I'm by no means sure that the drivers are installed or configured properly by the way...
Starting with optirun looked to work (the loading screen came up) but when the main window should've been loaded, the application terminated with the following output:
err:winediag:wined3d_dll_init The GLSL shader backend has been disabled. You get to keep all the pieces if it breaks.
libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/usr/lib32/xorg/modules/dri/nouveau_dri.so: wrong ELF class: ELFCLASS64)
libGL error: unable to load driver: nouveau_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: nouveau
libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
[VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
terminate called without an active exception
Before today I only used optirun for VLC (though I don't really see a difference) and to check whether it would run with glxgears. Neither case had any problems. I tried softlinking nouveau_dri.so from the "/usr/lib/..." to the "/usr/lib32/..." directory as well as copying it but neither helped.
Some info:
Graphic cards:
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Packages:
local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-nouveau 1.0.11-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
local/nouveau-dri 10.2.8-1
Mesa drivers for Nouveau
local/bumblebee 3.2.1-3
NVIDIA Optimus support for Linux through VirtualGL
Some advice how to fix the driver issue or about what else might be causing the problems is greatly appreciated!Besides agreeing with the notion above, you lack lib32-nouveau-dri and thus are unable to use acceleration with 32bit programs which is the undelying issue here.
-
Hard drive issues after update 10.10.3
Question also posted here:Hard Drive Issues (Both new and old)
I'm trapped in a HDD nightmare with my MacBook Pro mid-2012.
I updated to Yosemite 10.10.3 (with the Photos app). A couple of days after the update, I was watching a movie on my TV screen via HDMI. In the middle of the movie I removed the HDMI cable from the MacBook Pro and everything freezes. I forced shut down (Note: My HDD was encrypted). After I forced shut down, I tried to turn on and the loading screen would never stop loading - like, 14 hours stuck with the progress bar. Since I have backups, I decided to access DU and format my HDD. I tried everything. For real. Every command line I could type on Terminal to format, repair, erase and/or partition. I read almost every issue-related questions on the forums and stack exchange groups for a week (even posted my issue here: http://apple.stackexchange.com/questions/181090/erasing-and-partitioning-hard-dr ive-from-internet-recovery?noredirect=1#comment215695_181090).
So, I decided that it was a HDD failure and bought a new one.
I bought the Seagate 1TB SSHD Hybrid - ST1000LM014. Installed the new fresh disk and guess what? All those same problems again. I´m not able to restore from Time Machine because it doesn't recognize the disk in the restore page. But the disk is recognized in the DU. When I try to erase or partition the new SSHD, the same old errors: File system formatter failed. Yes, I tired GUID Partition Table, all of the security options, etc.
Please. Any light that you can throw at this issue, I'll be very grateful for. BTW, the new SSHD is recognized and the SMART Status says: Verified.
Any ideas on *** is going on?
Thanks in advance!
MacBook Pro (13-inch Mid 2012), i7, 8GB RAMAfter I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
I've been running 10.5.8 for awhile with no issues, and would recommend moving to it. -
We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?
If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac and at least iOS 5 on the mobile devices.
I show those document on my Mac, iPad 4 and iPhone 4S -
Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.
Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows PublisherHi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.
-
Pixma ip6000d windows 7 driver issue. How do you get one?
Has anyone solved the windows 7 driver issue? The canon website does not have one yet is reported windows 7 capatable.
Hello ricksterofmi,
The PIXMA iP6000D Drivers are included with the Windows 7 Operating System through Windows Update. Please connect the PIXMA iP6000D to your computer and automatically install the drivers. Once this has been done, visit our website by selecting this LINK to download and install the Add On Module for full compatibility.
I hope this helps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Driver issue after Downgrading to Windows 7 (Pavilion 17-f081no)
So,i went to downgrade yesterday,and have had this problem ever since. Nothing works except one USB port at the right side of the laptop (when looked at front),no usb connections,no wireless or wired connection,nothing. They are all dead,including SD card slot.
I know its the driver issue,but i cant seem to find them. I need something for USB ports,Ethernet/Network card/,SM BUS controller etc. They are all listed under "Other devices" in Device manager.
What drivers should i be getting? I have been trying to google,but i am starting to feel really hopeless here.
My wireless card info:
PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C&REV_00
PCI\VEN_10EC&DEV_B723&SUBSYS_2231103C
PCI\VEN_10EC&DEV_B723&CC_028000
PCI\VEN_10EC&DEV_B723&CC_0280Hi:
First install the amd chipset drivers and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
See if the generic amd graphics driver works...
http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064
Ethernet: DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Wireless:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_143747_1
Bluetooth:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142906_1
Card reader: DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT... -
Driver issue with Cisco HD Precision / JFV 4.4
Hi,
Just to installed Jabber for Video4.4 on my laptop ( win7 64bits)
all works fine except the video!! i use a Cisco HD precision wih Jabber, may be a driver issue, the camera is not recognized.
When i selected my integreted camera from laptop, the video is going up.
i've already the same issue with Jabber Video 4.3.
Does anyone has got the same issue? Any idea?
ThanksThread back from the dead...
I have this exact scenario playing out today trying to use a PrecisionHD USB camera with Windows 7. Completed the 1.5 update listed here and following the update I see the results in the picture. The LibUSB device is present, and it looks like a Tandberg HD camera is known to the system, but not accessible/usable.
Anybody have success with this issue or have any additional ideas to try? -
I have bootcamp on my mac and am having a driver issue. When I switch from mac side to bootcamp, I have to uninstall and reinstall driver to get on internet. Wondering if I did something to cause this issue? can't seem to fix. Was working previously. Now, I cant switch and get on internet on windows side without uninstalling/reinstalling NVIDIA driver.
Once you have XP installed, it is independent of BC. My suggestion is to try the 4.0.4033 drivers.
From Bootcamp.xml file for 4.0.4033 (there is also a 64-bit version in the same package).
<BuildInfo BuildNumber="4033" ProductName="Boot Camp">
<MsiInfo>
<ProductManufacturer>Apple Inc.</ProductManufacturer>
<ProductVersion>4.0.4033</ProductVersion>
<ProductCode>{E8F8AF38-7FFA-407A-8E4B-4722AE20FA30}</ProductCode>
<Component Name="AppleOSSMgr.exe" GUID="*" SharedDLL="yes">
<File Name="AppleOSSMgr.exe">
<KeyPath>yes</KeyPath>
<FileVersion>4.0.0.1</FileVersion>
</File>
<Registry>
<Key>HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run</Key>
<Name>Brightness</Name>
<Type>null</Type>
<Value>null</Value>
</Registry>
<Name>NVIDIA Display Driver
<InfName>NVAO.INF</InfName>
<Class> Display</Class>
<ClassGUID> {4D36E968-E325-11CE-BFC1-08002BE10318}</ClassGUID>
<CatalogFile> NVAO.CAT</CatalogFile>
<Provider>NVIDIA</Provider>
<DriverVer> 01/19/2011, 8.17.12.6141</DriverVer>
<ServiceBinary>nvlddmkm.sys</ServiceBinary>
<HardwareID></HardwareID>
<isX64>no</isX64>
Maybe you are looking for
-
How to capture excise in MIGO and refer the same excise invoice to customer
Hi experts, I am doing STO manufacturing plant to depot... i am creating STO order where No excises duties are there .Then , i create delivery by processing VL10B and create proforma invoice which is where i maintain all the condition
-
Is it possible to use Checkboxes with Table Views?
Hi, I need help with adding checkbox. Here is the detail of what I have. In my application page, I have the Region Definition: Type - SQL Query (PL/SQL Function body Returning SQL Query) Region Source - DECLARE l_sql VARCHAR2(50); BEGIN Call Function
-
HELP! FTP issue with proxy V3.6
Hello, We are using iPlanet Web Proxy Server 3.6 SP2, I've configued it with FTP accessing allowing, but when I type ftp://***@**** in the IE, it telnets me that the proxy deny the accessing. Anyone knows what's the problem? Thanks & Regards.
-
Dear all, If i want to change item category at master org level in inventory resp.how can i do this? Is there any suggestion? Thanks in Advance, Rutvi
-
I have a 2008 pro with Lion 10.5.8 and want to update OS to latest version available. Can I download of internet or do I have to purchase OS disk? Thanks