Weird Driver swap issue since 10.4.10 install
hey all hows it going.
i have a weird issue that i believe is a video driver issue. im actually a system administrator for a company so this is kind of fustrating not knowing how to fix something, so i turn to you guys!
ok so i have a imac g5 17" pc i've had since around 2003-4 now.. and the issue is that the display keeps alternating between 800X600 to the proper native resolution by itself randomly.
i have done a re-install of osx 10.4 and repatched to no avail, i have repaired permissions to the disc, i have started osx in safe mode and got it to rebuild the basic windows.preferences.plist file to no avail.
and then i noticed something. the specs on my mac had changed slightly since the 10.4.10 upgrade. i have not made any upgrade changes.
basically, this should be the video card according to apple and my receipt
Graphics NVIDIA GeForce FX 5200 Ultra with 64MB DDR
SDRAM with AGP 8X support
from the website
http://support.apple.com/specs/imac/iMac_G5.html
looking on my "about my mac" "more.." section it states
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: AGP
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-xxxxx-117
Displays:
err.. what the? i believe this COULD be the issue, no?
so my question is, how in the world could this happen and how do i change it back or change the video driver ? please help asap!
Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.4.6 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE
Similar Messages
-
Weird Network/IP Issue Since Updating to Yosemite
Since I updated to Yosemite, I've had two (possibly connected?) things start happening.
1) I occasionally see a pop up error message that reads:
"Another device on the network is using your computer's IP address. Try connecting again later. Of you continue to have problems, change the computer's IP address..."
I haven't noticed any new connection issues, but under "Shared Devices" in finder, my own computer appears many times. Right now I see 10 "Emily's Macbook Pro"s under that tab.
2) Every time I wake my computer from sleep or restart it, I end up having to go through two password screens to log back in instead of one. The first looks a little off (slightly misaligned text and images). The second (after I've already entered my password once) looks fine, and actually logs me in.
Anyone know what this is about or how to fix it?I got this email from AOL (unsolicited); I have not acted on it:
"You may have heard that Apple is releasing a new operating system called X Yosemite. This update is not compatible with the current AOL Desktop application. If you upgrade your Apple operating system, you will experience an unstable AOL Desktop application and will need to access AOL Mail, news and video on AOL.com or the new AOL app.
If you want to continue using your AOL Desktop application and not upgrade, you do not need to take any action right now.
In the meantime, we are working with Apple, while diligently working on new AOL software and will contact you as soon as we have more information.
Thanks for your patience and understanding.
The AOL Desktop Team" -
Hard drive swapping issue GE60 2OC
So i bought this new MSI GE60 2OC laptop and the only rly negative point with it is its HDD, cause I'm used to SSD now.
Thus i decided to upgrade the laptop with my SSD from my old laptop which is an OCZ agility 3 240g. So i plug it in my laptop nothing goes wrong just like i have done it before.
Then i start the laptop and it goes straight into bios menu where you set boot option and such, fine i thought and checked if it was in ACHI mode,
so i saved and exited then after i saved and exited it rebooted and went to the same bios boot menu again. now i got nervous and check all the setting and they were correct and it keeps looping like this every time u exit it the menus.
tried several boot option and switch to legacy from UEFI then it booted but dunno if it is the correct way to do it .
So i swapped it back to UEFI to get it back for my HDD.(Legacy boot thing might be the correct way pls say if that works, cause haven't red into it that much yet).
Now i thought it was broken so i switched back to the HDD and it worked perfectly and i tried the same thing with my dads SSD an samsung SSD Basic 840-Series 250GB
but got the same loop and have searched forums and so on but i have no clue why it get stuck there, it's like the laptop don't find the SSD in bios only the HDD. Any ideas of how i should proceed would be awesome.Hello Odeen,
I assume you have the HDD plugged out/removed when you have your SSD inserted in the laptop? If you have plugged it in, try setting the boot order in the BIOS to HDD first!
If you have your HDD unplugged, you are not using an MSATA but just the Sata 3 for the SSD because you only have 1 SATA slot right? The SSD doesn't have the proper Windows files and/or proper boot files to boot to Windows, therefore it boots into the boot menu (I think) You should take an bootable USB/DVD (DVD is recommended) and put the bios into UEFI mode for a Windows 8 DVD or you should put it in LEGACY mode when installing Windows 7, for Windows 7 install it's a bit harder but I have a tutorial on that topic on this forum... Let's say that you're going to install Windows 8: go to the bios and turn off secure boot and fast boot and enable the boot mode in UEFI, boot the Windows 8 DVD in UEFI mode (when seeing the MSI logo press F11) and select the boot device in the Boot Menu, now your Windows 8 Installer should load the Windows files. Select your SSD (do not format it in Windows so if you haven't done a format yet go make a Parted Magic bootable USB/DVD and do a secure-erase on the SSD (tons of tutorials about that on the interwebz) Now install Windows 8 on your SSD and there you go, Windows 8 installed on your SSD in UEFI mode. Everything should work fine from then...
Hope I helped you out! -
Late-2008 Macbook Pro Hard Drive Swap Issues
I recently bought a new WD Scorpio 500 mb internal hard drive and I was in the process of restoring things from my external hard drive. At the very end of the restoration, the prompt to restart my macbook pro came up on the screen so I went ahead with the restart. After restarting, however, the apple logo would show but after a few seconds a prompt appears saying that my computer needs to restart. This has occurred ever time after restarting so now I'm confused as to what I did wrong. Please HELP!!!
Kernel Panic:
http://support.apple.com/kb/HT1392 -
Performance issues since upgrade
I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
I have also removed TotalFinder and have noticed no improvement and still have the above issue.
Thanks in advance!
Here is my EtreCheck:
Problem description:
slow performance on Mavericks
EtreCheck version: 2.0.11 (98)
Report generated November 11, 2014 at 8:51:26 AM EST
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
Color LCD 1920 x 1200
LED Cinema Display 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:46:22
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 749.30 GB (256.69 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Tablet PTZ-630
Logitech Logitech USB Headset
Apple Inc. Display iSight
Apple Inc. Apple LED Cinema Display
Apple Inc. Display Audio
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
Iomega HDD unknown_device 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 32 KB
Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/Symantec/Protector
[not loaded] com.symantec.kext.protector.panther (1.0f5) Support
[not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
/Library/StartupItems/SymAutoProtect
[loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
Startup Items: ℹ️
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
SMC: Path: /Library/StartupItems/SMC
SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
SymProtector: Path: /Library/StartupItems/SymProtector
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.jamfsoftware.jamf.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.symantec.quickmenu.application.plist Support
[running] com.wacom.wacomtablet.plist Support
[running] net.juniper.pulsetray.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.fitbit.fitbitd.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.jamfsoftware.jamf.daemon.plist Support
[not loaded] com.jamfsoftware.startupItem.plist Support
[loaded] com.jamfsoftware.task.1.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.rogueamoeba.instanton-agent.plist Support
[running] net.juniper.AccessService.plist Support
[loaded] net.juniper.UninstallPulse.plist Support
User Launch Agents: ℹ️
[loaded] com.valvesoftware.steamclean.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
Dropbox Application (/Applications/Dropbox.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
cdn Volume (/Volumes/cdn)
TotalFinder Application (/Applications/TotalFinder.app)
SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
Internet Plug-ins: ℹ️
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
AdobePDFViewer: Version: 10.0.2 Support
Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
iPhotoPhotocast: Version: 7.0
DirectorShockwave: Version: 11.5.9r620 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 4.0.60310.0 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
net.juniper.DSSafariExtensions: Version: (null) Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
User Internet Plug-ins: ℹ️
SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
Safari Extensions: ℹ️
1Password
Adblock Plus
Reddit Enhancement Suite
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
SymAutoProtect
Symantec\nQuickMenu Support
WacomTablet Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Destinations:
Iomega HDD [Local]
Total size: 500.04 GB
Total number of backups: 37
Oldest backup: 2014-10-14 14:11:11 +0000
Last backup: 2014-11-11 13:27:48 +0000
Size of backup disk: Excellent
Backup size 500.04 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
36% com.apple.WebKit.Plugin.64
34% SymAutoProtect
13% WindowServer
9% Unity
4% Activity Monitor
Top Processes by Memory: ℹ️
455 MB Safari
361 MB com.apple.WebKit.Plugin.64
292 MB Unity
77 MB com.apple.WebKit.Networking
77 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
2.08 GB Free RAM
2.39 GB Active RAM
1.34 GB Inactive RAM
1.40 GB Wired RAM
1.11 GB Page-ins
5.54 GB Page-outsActivity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Hi-
Looked thru the thread related to my questions and found nothing that applies yet.
Example:
http://social.technet.microsoft.com/Forums/en-US/4e4472b9-8e6f-4fdc-a287-1cc8c0f6de09/windows-2008-r2-backup-fails-with-event-521-error-code-2155348001?forum=windowsbackup
http://social.technet.microsoft.com/Forums/en-US/e8c910f7-f0dd-4613-beae-b98894fb6f23/windows-server-2008-std-backup-fails-constantly-with-error-code-2155348001?forum=windowsbackup
Here are details of the issues....
Backup - OS error - system image:
External disk - USB
Mon - Fri @ 6PM.
Windows SystemState
OS(C:)
Last backup failure...
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
[Critical error WINIMAGE_UNABLE_VSS] Unable to create VSS snapshot
- Additional information: Refer to the log for more details
- Troubleshooting link:
http://kb.backupassist.com/errormap.php?BA2512
The backup operation stopped before completing.
Detailed error: ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-12-08-2014_04-41-00.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-12-08-2014_04-41-00.log
NOTE:
The errors logs are not there?
Windows Backup timed-out before the shared protection point was created.
ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Event Viewer Log:
Sequence of Events...
1.
The Block Level Backup Engine service has successfully started.
2.
Backup operation that started...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 4:51:06 AM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The backup operation that started at '?2014?-?08?-?12T09:41:00.492000000Z' has failed because the
Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed
with following error code '2155348001'.
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
--> Suggestion are to check Virus scanner or consult DPM forum...
3.
OS Job failed with errors...( Backup Assist is 3rd party backup - wrapper round Wbadmin/Win Backup)
Log Name: Application
Source: BackupAssist
Date: 8/12/2014 4:51:51 AM
Event ID: 5634
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Backup job OS backup failed with errors.
Critical error: Unable to create VSS snapshot
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
4.
Backup Assist reports via Win backup - Snapshot in progress
Log Name: Application
Source: BackupAssist
Date: 8/12/2014 4:52:20 AM
Event ID: 5634
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Backup job Data backup failed with errors.
Ultra critical error: Volume Shadow Copy Error 0x80042316 - snapshot set in progress
Destination: Local directory
Start time: 8/12/2014 4:52:10 AM
End time: 8/12/2014 4:52:12 AM
Duration: 00:00:02.7300000
5.
The Block Level Backup Engine service has stopped.
6.
Later...we tried manually stopping VSS and SWPRV services - only VSS had the issue.
WBengine was not running...
C:\>sc stop swprv
SERVICE_NAME: swprv
TYPE : 10 WIN32_OWN_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query swprv
SERVICE_NAME: swprv
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query wbengine
SERVICE_NAME: wbengine
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query vss
SERVICE_NAME: vss
TYPE : 10 WIN32_OWN_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc stop vss
[SC] ControlService FAILED 1061:
The service cannot accept control messages at this time.
Log Name: Application
Source: VSS
Date: 8/12/2014 9:20:33 AM
Event ID: 8225
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
The VSS service is shutting down due to shutdown event from the Service Control Manager.
7.
VSS still having issues here...not stopping!
Log Name: Application
Source: VSS
Date: 8/12/2014 9:42:33 AM
Event ID: 11
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service information:
The COM Server with CLSID {e579ab5f-1cc4-44b4-bed9-de0991ff0623} and name IVssCoordinatorEx2 cannot be started.
Most likely the CPU is under heavy load. [0x80080005, Server execution failed]
8.
Not sure why this is started again?
Plus a DCOM timeout...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 9:31:13 AM
Event ID: 753
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has successfully started.
Event Xml:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 8/12/2014 9:31:43 AM
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
The server {E579AB5F-1CC4-44B4-BED9-DE0991FF0623} did not register with DCOM within the required timeout.
9.
Lots more errors about VSS...repeating Event ID's 11 and 8193...
Log Name: Application
Source: VSS
Date: 8/12/2014 9:42:33 AM
Event ID: 8193
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance.
hr = 0x80080005, Server execution failed
. Operation:
Instantiating VSS server
10.
Then, finally stopping again...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 9:51:13 AM
Event ID: 754
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has stopped.
11.
And still repeating 11 & 8193 at this point...as we write up this post.
12.
This was suggested by the Backup Assist - software vendor....
A.)
...for 0x81080101:
"ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try again this operation."
If you receive the above error in your report, we have recently found a registry key which
contains the timeout value set by Microsoft for VSS and found that you can edit this to extend it.
To get to the registry key, open Regedit (Start > Run > Regedit) and browse to:
"HKLM\Software\\Microsoft\\Windows NT\\CurrentVersion\\SPP\\CreateTimeout".
Change value to 1200000 (2*10*60*1000 = 20 mins).
The default for the timeout period is 10 mins so hopefully doubling this will give enough time to
complete the snapshot.
If this isn't present, you'll need to manually enter the registry key. It's a DWORD 32-bit key.
--> NOTE: HAve not done this yet.
B.)
And for 0x80080005...
http://support.microsoft.com/kb/870655/en-gb
Our server does have high CPU load at times...
13.
Another post from technet mentions system volume size - here is our layout below:
A.)
OS/system Disk...
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
Disk 0 Online 278 GB 0 B (System Vol = C: Drive - OS w/ Programs and batch jobs)
Disk 1 Online 2791 GB 0 B * (Data drive - DFS, rsync,etc. run on D: Drive)
Disk 2 Online 1863 GB 0 B (USB 2/3.0 - Enclosure w/ SATA disk = 2GB formatted w/ NTFS.)
DISKPART> detail disk
DELL PERC H710P SCSI Disk Device
Disk ID: CA0DEEA5
Type : RAID
Status : Online
Path : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0100)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 1 RECOVERY NTFS Partition 3072 MB Healthy System
Volume 2 C OS NTFS Partition 275 GB Healthy Boot
B.)
Backup disk...
ST320006 41AS USB Device
Disk ID: 801AF48C
Type : USB
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 4 F BACKUPS NTFS Partition 1863 GB Healthy
C.)
NOTE:
Also on disk 0(system Disk) - we have a small OEM partition = 39MB and a Recovery Partition = 3GB.
D.)
Issues with WBAdmin now...
C:\>wbadmin get disks
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x80042302)
A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
14.
Ran "Check-Disk" -no errors...
C:\>chkdsk
The type of the file system is NTFS.
The volume is in use by another process. Chkdsk
might report errors when no corruption is present.
Volume label is OS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
116224 file records processed.
File verification completed.
654 large file records processed.
0 bad file records processed.
0 EA records processed.
76 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
156676 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
116224 file SDs/SIDs processed.
Security descriptor verification completed.
20227 data files processed.
CHKDSK is verifying Usn Journal...
35628352 USN bytes processed.
Usn Journal verification completed.
Windows has checked the file system and found no problems.
289233919 KB total disk space.
100241492 KB in 85477 files.
57380 KB in 20228 indexes.
0 KB in bad sectors.
226627 KB in use by the system.
65536 KB occupied by the log file.
188708420 KB available on disk.
4096 bytes in each allocation unit.
72308479 total allocation units on disk.
47177105 allocation units available on disk.
15.
There are no backup error logs here - only .etl files...
C:\Windows\Logs\WindowsServerBackup\
Wbadmin.1.etl = 9:42AM on 8/12
Wbadmin.2.etl = 4:51AM on 8/12
Per windows Win troubleshooting:
http://technet.microsoft.com/en-us/library/ee692290(WS.10).aspx
http://blogs.technet.com/b/filecab/archive/2009/09/16/diagnosing-failures-in-windows-server-backup-part-1-vss-spp-errors.aspx
--> Related to Windows backup and not VSS?
2155348001 - 0x80780021 - Windows Backup timed-out before the shared protection point was created.
Should we run the "FIXVSS08.BAT" script - restarts services and re-registers DLL's - does this ever help?
Will this server need a reboot since VSS is in a state and we can't even test backups?
Is there a tool we can use to debug VSS or troubleshoot or OS backups further?
MSReport/Diag, VSS debugging, or another way of helping fix our OS(SystemState/C: drive) backup issues?
Any help is greatly appreciated - thx.
-SP
Scot PichelmanHi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected] -
After The Hard Drive Swap?
Hi All
My Hard Disk swap didn’t go as smoothly as I hoped.
My attempts to clone my old drive were unsuccessful because Carbon Copy Cloner froze twice on me almost at the end of the cloning process. I gave up with CCC because cloning 60GB over 400 Mbs Firewire takes hours and hours. I subsequently learned from replies on the Bombich software forums that I could have restarted from where it left off - I'll remember that if I ever have to do it again.
I eventually managed to boot off the DVD drive. Because my disk was partially cloned, the installer thought that OS X was already on there and tried to upgrade the installation. This didn’t work, it wouldn’t boot. Eventually I realised what was going on, erased the drive first and then did a full install. I was then able to start off the new drive.
I’m just doing all the Tiger updates through Software Update. While I wait for that to complete, I have two remaining issues to resolve:
1. I now have no start up chime - although sound works. Can I fix that or is this a symptom that I’ve screwed up the repair?
2. I have my old drive in a Firewire enclosure and can read it OK. I’d like to get my users and applications off it and onto the new drive. How would you recommend I do that? I don’t know if it makes sense to selectively clone Users and Applications independently of everything else.
I’m sure all this is buried in some threads somewhere but my head is beginning to spin a bit. Hopefully you can help.
Thanks
Ian
iMac 17" Flat Panel (OS X 10.4.7)Hi Swissfondue
Thanks for responding. I started to use it before I got your post!
I was going to reply after it completed to say if it was successful or not. I didn't see Migration Assistant referred to on the other threads about this issue that I've seen. In fact one or two specifically advise against trying to move users from one drive to another but maybe they were written before MA was available.
My machine is going much faster with these upgrades Don't know whether to attribute it to the extra RAM or the new disk. -
Various issues since Leopard upgrade
I have just installed Leopard on a Dual 2.7 G5 with a 500GB Hitachi HDD and 5GB RAM and I have noticed one or two niggling little 'quirks' (I am lumping everything together here, rather than separating them in to more appropriate sections, so that I have a record of everything together).
1) I have an Epson Perfection 4870 scanner which I cannot use to scan directly from applications (for quickness I mainly use Preview) as the 'scan' button is always unavailable (greyed out, not highlighted in blue). This has been an issue since at least 10.4.8, so it's not a problem exclusive to Leopard, but it's extremely annoying nonetheless. As I can scan directly from the Epson Scan software (which is basically the driver) Epson will not assist me further and have directed me to Apple/Adobe/MS, etc., for support. Prior to 10.4.8 (IIRC) I could select 'import' (from whatever application) and it would automatically preview, the scan button would then become available and hitting it would launch the driver software. However, the link between the applications and the driver seems to have been severed somehow/somewhere and it is no longer recognising that the unit has finished its preview in order to make the 'scan' button available for the next part of the process.
In Tiger, I could also scan into Epson's EasyScan application, but have been told this isn't 10.5 compatible.
Does the above make sense...? Has anyone else experienced this - and have you solved it? If so, how?
2) This next bit concerns the Dock. I like to have it hidden along the left hand side of the screen, rather than at the bottom, because I only have a 17" panel and desktop space is at a premium. However, about one restart in five, it's back along the bottom and any icons or folders that I have added to it have gone AWOL.
3) The third issue is a sound issue. I have a Revolution 7.1 card which I understand, from reading a notice on M-Audio's Web site, is not yet Leopard compatible (though the promise it will be "very soon"' though as the last driver release didn't support anything newer than 10.4.6, IIRC, I'm not holding my breath!)
So I have removed the card and plugged my Logitech Z5500s back into the 'on board' card. This was working flawlessly under Tiger (I know because I tested it to make sure, because I knew that the Revolution wouldn't function under Leopard). However, whatever I try, I only seem to hear sound from the internal speaker; I even replaced the optical cable (at great expense - the original was a Belkin Gold Series, and so is the replacement and, at about £35 a pop, it's not a trivial outlay). Everything in the sound sys prefs is completely 'greyed out' so I cannot change it from the internal speaker to anything else. Whilst there is nothing on Logitech's Web site as regards to the Leopard compatibility of any of its products (it seems that it gave up on the Mac a very long time ago; I use a MX510 which was the last of their rodents to have any kind of OS X support and that stopped with 10.4.4, IIRC) I cannot see how a set of speakers, which should work with anything that has the required jack sockets, can be fussy about an OS. Incidentally, I also have a 'dark side' box running XP Home (when I win the lottery, I'll buy a Mac Pro and dispense with it) and they're plugged in there and work fine (via analogue, though, not digital).
I noticed it when I received some CDs that I'd ordered from Amazon the other day and found that iTunes was playing through the internal speaker.
4) The final issue is a networking issue. Under Tiger, I could (though it did take me some tweaking to get it working smoothly) dump things from the G5 on to the Windoze box and vice versa, without too many hiccups. However, Leopard is proving to be somewhat of a challenge, to say the least. I don't know how I managed it, but I did manage to render the machine completely inoperable at one point (it would only boot as far as the grey 'Apple logo' screen and I couldn't open the optical drive to stick the DVD in - a panicked phone call to a friend, who runs his own Mac repair and consultancy business, followed!
I don't understand SMB and AFP (though I do know about FTP). In the Finder, I can see the 'doze box and can send things to it (though should I be connected as 'guest'?) but there is nothing on the Windoze side, save for 'Printers and Faxes'). I have made sure I have permissions set correctly and everything is set up to share (and Windows sharing is on) but there is nothing on the other box at all.
Is it possible to share the main HDD across, or am I limited to this silly 'Drop Box' thing (which I did have available under 'doze at one point, though it was read only and I couldn't change permissions from Leopard because I didn't have sufficient privileges, even though I have an admin account and I could change permissions under Tiger with the same level of 'clearance'.)
4) This final issue is sort of linked with 3) as it concerns what I believe to be erroneous error messages. I was clearing some stuff off a drive I was going to use for Time Machine[1], but I wasn't allowed to delete most of it because 'XYZ was in use' or open in an application. Six reboots later, I was still receiving the same error; strikes me that Leopard's got its knickers in a knot somewhere along the line because the files in question (mainly old Word and Excel docs) were certainly NOT in use as I didn't have either installed at the time!
[1]Though having read the problems people are having with TM (not just here, but on other forums I read/post to) I think I might give it a miss and stick with ChronoSync (just have to wait for it to be compatible).
So, this is actually the second installation, but the problems remain - any help out there?
Sorry for the verboseness of this, but I wanted to make sure that I'd covered everything. I'm almost tempted to reinstall Tigger (but not quite - I like Spaces, and I like the Dock Preview).
Cheers for any assistance, folks!
FranFran, I'm not sure I'm going to be much help for all your problems but I will attempt to answer what I can.
1. Scanner problems - have you tried reinstalling the software? I know you mentioned that the easyscan software is not compatible but it sounds like the driver software isn't in the right place. Optionally another program that you might want to look into is vuescan. I have had good success with the program in the past but I have yet to try it under Leopard.
2. Dock problems this sounds like either a corrupted preference list. But I don't have a clue as to why it might be reoccurring. Have you fixed permissions on your computer since installation?
3. I don't have a clue to figure out how to fix this issue.
4. Networking - As for sending things to the doze box. You don't need to be connected as guest. Just use the username and password that you use when you sign into the windows to sign into the windows box and you should have the same rights as you would as if you were using windows on that computer. Yes it is possible to share the main HDD but it isn't something that I would recommend. What I do recommend is creating a folder where you have both read and write rights to and then use that folder share items across both computers. If this isn't something that is going to work for then at the most I would just share your documents folder. You didn't mention how your trying view information on the windows side you should be able to browse your network and eventually find and see the mac.
4 (part 2) - I would recommend something besides TM, it is designed to recover lost/accidentally deleted files. And isn't really designed for being your complete backup program. Yes, you can use it for that but I would recommend something more robust. Some of that comes down to how you want to define your recovery strategy. Superduper!, promotes themselves as having the ability to boot for your backup drive and being able to almost immediately get back in business. If this is a critical factor to you then I would lean in that direction. If you are just worried about having a backup of critical data files then Chronosync or some other program will work just as well. Also mentioned in your post in this paragraph is a description of "files in use" problems. A couple of things come to mind did you let spotlight finish indexing your drive before you tried deleting files? I've run into a problem similar to this in Tiger when I was deleting files while spotlight was indexing.
One item that you didn't mention was what kind of installation you did when you installed Leopard. If you didn't do an 'erase and install" then that might be something to look into. First back up your computer before doing this. You might also want to run a permissions fix on your drive to see if that helps at all.
HTH
Paul -
Photoshop CC(2014) is having "redraw" or video driver/GPU issues
Since upgrading my Mac to OS X 10.10 (Yosemite), after a working on a file or two, my photoshop image window looks like this:
This is a JPG, after I have opened a RAW file, with Camera Raw 8.7 beta (happened before the Camera Raw
update), and make my adjustments, and save. Everything seems fine, the jpg preview looks fine, but after working
on about 3 images, EVERY jpg opens and looks something like this. I can see parts of other recent images
in the garbage as well, and the image changes drastically when I zoom in and out.
I already posted to the Adobe forums, and someone suggested it might be a video driver/GPU issue with the new OS X.
Any suggestion?An Adobe employee in the online community had me turn off "Use Graphics Processor" in the photoshop/prefs/performance,
and that worked. Not a total fix, since I can't use that now, and something is clearly not compatible, but at lease I can use
Photoshop. -
Drives swapping [solved]
I have been running arch completely reliably on my desktop for about 18months. It's a superb distro - well done - this is what slackware should have been!
The existing hard drive (SATA) is partitioned:
sda1 ntfs/xp
sda2 swap
sda3 ext3/xarch
and all was working well...
I recently added space by dropping a spare IDE drive in - with one big ntfs partition. Now the drive order at boot seems random:
Grub ALWAYS sees: hd(0,0), (hd0,1), (hd0,2) and (hd1,0), so I can boot the kernel from (hd0,2) as normal. The problem comes with the kernel line, sometimes the line
kernel /boot/vmlinuz26 root=/dev/sda3
will boot and sometimes it will hang with a 'waiting 10 secs for sda3' error. In these cases the kernel is seeing the drives swapped - so it actually wanted a root partition in /dev/sdb3.
The workaround I have in place at the moment is to have two grub entries, one with
root=/dev/sda3
and the other
root=/dev/sdb3
. Whichever one I choose has a 50% chance of being correct so I can usually boot within 2 or 3 tries. But this is a workaround rather than a solution.
I have searched the forums and wiki but could not find anything relevant. Surely there must be something that I am overlooking? What could be causing this and how could I solve the problem?
Thanks in advance, Richard.
Last edited by r_j_h (2010-03-06 20:42:39)You should name the drives by UUID:
Arch Wiki wrote:If your machine has more than one SATA, SCSI or IDE disk controller, the order in which their corresponding device nodes are added is random. This may result in device names like /dev/sdX and /dev/sdY switching around randomly on each boot, culminating in an unbootable system or kernel panic. Persistent naming solves these issues.
http://wiki.archlinux.org/index.php/UUID#by-uuid -
Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.
I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?
-
Video issues since Windows 7 installation
Hello,
I recently updated my T500 2081-CTO to Windows 7 (formatted the drive for a clean 64bit install). Since then I've had two issues with the Discrete graphics. The first is that I can't change the brightness when I'm in high performance mode, and the second is that the graphics performance has gone way down since the update. I have a 3D screensaver from Planesoft that used to run at 20-25 FPS under Vista, now that I'm running Windows 7, it's at about 5-7 FPS.
I've seen a lot of posts about the brightness issue, but I've updated the drivers and it hasn't helped yet. I haven't seen anything about the graphics performance issue.
Thanks in advanceI'm not certan, but doesn't the switchable driver _include_ the appropriate Intel driver? You might be able to install the Intel driver you are trying if you set the machine in integrated graphics mode, but I don't think that's the right thing to do.
Which ATI driver are you running? This one in the driver matrix has an interesting comment in the Changes section:
"(Fix) Fixed an issue where the LCD brightness could not be changed when the graphics mode was set to high performance on starting the computer."
ThinkPad Switchable Graphics Driver for Windows 7 - ThinkPad R400, T400, T500, W500
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
This is in regard to hard drive encryption issues in my USB Hard drive. I have Windows 7. I was encrypting my USB hard drive and
was able to enter a password. However, I did not receive any prompt to save the Bitlocker recovery key. During encryption process, I received an error. The encryption process was unsuccessful. However, now when I plug-in the hard drive, I receive the
following message on the status bar:
Application and Device Control rule Block writing to removable media. Unencrypted drive found (No_Encrypted_Found) has blocked edpa.exe trying to access Volume
{e3901a75-f1ff-11e1-817c-806e6f6e6963 alpha-numeric number appearing here}
When I try to open the drive, it asks for a password. When I enter the password, I am receiving the following error message:
Bitlocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media
being write-protected.
I have read that Bitlocker repair tool can help resolve this issue.
However, I just have the password that I had set to encrypt the drive and Bitlocker recovery key identification. Can this help to get access to my hard drive data using the Bitlocker tool.Checked this ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/bitlocker-drive-encryption-failed-to-recover-from/232e812b-4f7a-e011-9b4b-68b599b31bf5
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
ThanksNoooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!
-
Voicemail issue since i did upgrade
voicemail issue since i did upgrade
Hi there lisapetito,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting voicemail
http://support.apple.com/kb/ts4430
-Griff W.
Maybe you are looking for
-
each time I create a new album in IPhoto, photos from another album or from photo stream are automatically dumped into the new album.. how do I create a blank album and then import photos from a flash drive into the new album?
-
How to run jsp using tomcat server?
hai friends, i'm using jsp for my application and for that i'm using tomcat server. i was runing my jsp files like this http://localhost:8080/examples/jsp/myapp/index.jsp but instead of this i need to run my jsp files like this http://localhost:8080/
-
I'm able to connect to my sql database and call a stored procedure, but is there any way to call dts? here is how i'm accessing the stored procedures: Class t = Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver"); Connection conn
-
Runtime error after migrating to 7.3
Hi, We have an enterprise portal --> portal application standalone type DC. We have been able to migrate the DCs to 7.3. The problem we are facing currently is that one of the applications does not load in the portal giving a portal runtime error. Lo
-
3 weeks into learning Oracle, and I think I am ready for the next step.
Hi all, I am in need of some suggestions. I have been learning oracle for almost 4 weeks now, and I need to design a database with some real world functionality. I want it to be fairly difficult so that I am able to learn things by being "thrown to t