Weird error -43, when double-clicking a numbers document in finder

Steps to repro:
0) open a finder window at the location (e.g. ~/Desktop) you are going to save your numbers document.
1) create a new numbers document.
2) save the document to the directory (e.g. ~/Desktop) that you have already displaying open in the finder (<- very important)
3) switch to the finder and double click the numbers document.
4) I get a error -43 at that point.
5) To get around the error you have to change the directory to one up and then back to where the numbers document is or switch the view mode (cmd-1, cmd-2, cmd-3) .
Looks like the finder has problems with recently saved numbers documents.
Even weirder:
Press cmd-I on the numbers document in the finder after you just saved it. The numbers document disappears and so doeas the Information dialog. What the heck?
Can anyone else repro this?

Thanks for trying.
I tried as well, now saving to the desktop, which is on a seperate volume.
I had the problem saving to the work volume.
It seems to have to do with permissions.
I checked "Ignore ownership on this volume" and applied it to all subdirs.
Seems to have solved the issue.

Similar Messages

RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

Hi, all,
Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
Any advice you could give would be welcome.

Hi there
Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Error Message when Double-clicking a CS4 InDesign File; Won't Open

I recently installed CS4, upgrading from CS2. Before installing CS4, I could double-click the icon for the file and it would open in InDesign CS2. After installing CS4, when I double-click an InDesign file icon, I get an error message that Windows cannot open the file and needs to know which program should be used. I check the "Select the program from a list" and a window opens that lists several of the applications I have installed. Neither InDesign versions are on the list, so I "Browse" to the Adobe folder in which both InDesigns reside. I then select a version (it doesn't matter which one; neither work) but then it doesn't appear in the list and my "selection" reverts to the "recommended" Photoshop CS4.
I can understand if this function has disappeared in CS4, and we now have to open a file using the "open" menu item, but I can't understand why neither verison "sticks" in the "Open With" window.
Any suggestions? I'm using Windows XP SP2.
Thanks,
Lloyd

That's what I thought. I tried the folder options association trick at http://forums.adobe.com/message/2864550#2864550, which kind of worked. Now, when I double-click on an InDesign file icon, InDesign CS4 opens, but the file does NOT open. Looks like I'll have to reinstall, unless someone has an addition to the solution.
Thanks!
Lloyd

Error message when double-clicking icon to open document, won't open

My documents will not open when I double click their icon. They will open when dragged to the application icon or from the application itself. I get an error message if I try to open by double-clicking the icon. This is for In-Design, Photoshop, Illustrator, etc. Is this a simple fix?
Thank you.

Select one of the icons in question and do a Get Info on it.
You will be presented with the standard Get Info window telling you, amongst other things, what the default program is to open the file.
You can also select "Use this application to open all similar douments like this".
See if that helps.
Normally the finder will do this for you so there may be other issues going on with your user preferences.

In finder, or say anything else such as downloaded files, I have to push open with in order to open the file. If I simply double-click on a document from finder, it does not open.

Hey guys. I have this problem where when I try to open say a document from finder, I have to push "open with."
Simply double-clicking does not work. I would greatly appreciate it if anybody could help.
Another unrelated problem is that when I push to open itunes, it says that it is on a locked disk.
Thanks

Select a particular download file. Press COMMAND-I to open the Get Info window. In the Open With section choose the desired default application from the dropdown menu then click on the Change All button.
For .dmg files use DiskImageMounter (System/Library/CoreServices/ folder.)
For .zip files use Archiver - same folder as above - or download TheArchiver - MacUpdate or CNET Downloads.

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

Error when double clicking rdf file?

I'm using Reports 10g R2 on Windows XP Pro SP2. When I try to double click on a report file (ANMSC.rdf) the Report Builder starts, but doesn't open the report file. I get the following error:
Windows cannot find D:\ANMSC.rdf. Make sure you typedthe name correctly, and then try again. To search for a file, click the Start button, and then click Search.
Also, report files have a generic icon instead of the Oracle Reports icon.
Does anyone know why Oracle Reports can't open the file when double clicking?

I'm using Reports 9i and the same happens.

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How to get the alv grid report in another screen when double click on basic

Hi.
I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
With Regards,
Ramana.

On double click event . you will have to call another screen say 9000.
now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
in PAI of screen 9000, you can return to the original ALV.
method double_click.
call screen 9000.
endmethod.
" now in PBO create a module display_alv2
module display_alv2.
'prepare the fieldcat/layout info for new alv
'add the data to the new ALV table
'instantiate the grid call.. etc
'call the ALV
endmodule
"in PAI
module exit.
case sy-ucomm.
when 'ENT1'.
leave to screen 0.
endcase.
endmodule
while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
E.g
*--Service Order
    ls_fieldcat-tabname   = 'IT_FINAL_VALID'.
    ls_fieldcat-fieldname = 'AUFNR'.
    ls_fieldcat-scrtext_m = 'Service Order'.
    ls_fieldcat-ref_table = 'AUFK'.
    ls_fieldcat-ref_field = 'AUFNR'.
    ls_fieldcat-col_pos   = 1.
    ls_fieldcat-outputlen = 12.
    ls_fieldcat-emphasize = 'C400'. "This will add color to the cell
    APPEND ls_fieldcat TO fcat_valid.
Hope this helps.

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

When double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

when double click itunes icon it shows " The file itunes library.itl can not be read because it was created by a newer version of itunes" so what can i do?

Unless you have attempted to downgrade to an older version of iTunes this is likely to be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

Excel cant find this file when double clicking to open

Hi,
Our Imacs 10.8.2 and 10.7.3 joined to windows 2008 domain cant open certain excel files from the network share. When double clicking the file or opening from excel -> file open it says it cant find the file. If I drag the file to the desktop then it will open when double clicked. I have tried disconnecting the network drive and reconnecting. I checked permissions and even tried a few cleaner products such as mac keeper and ccleaner and still the same issue. I even upgraded one of the macs from 10.6.8 to 10.7.3 and the issue persisted. Its very strange as some users can open but others cant. Any insight greatly appreciated.
Thanks
Lorne

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Ver. 9.4.2 error msg when I click Attach to email: "No profiles have been created...

My Acrobat Ver. 9.4.2 has the following error msg when I click Attach to email: "No profiles have been created.."
I have created the profile in Windows 7 and it works fine with all of the Microsoft Office programs. I use Thunderbird email.
I've followed the corrective measures listed by Adobe to no avail. Can anyone offer some help?
Thanks.

Hi,
It is possible that even though you are using Thunderbird, Windows might have made outlook your default email client once you installed Microsoft Office. Since there is no email profile set in Outlook, it throws an error "No profiles have been created".
A work around can be to make create an email profile in Outlook and make sure that it is set as default email client by selecting it as default in "Default Programs".
Hope that helps.
PS: Adobe does not officially support Thunderbird.
Thanks,
Abhilasha

How to open each CS version file in its proper version program when double-clicked?

Hello everyone,
This one is about the coexistence of Indesign CS4 and CS5.
In my company: I'm working with Indesign CS4, but a colleague is testing CS5 in real day-to-day works, and everyday I come across CS5 files that I need to correct, so I have CS5 installed too. Now, when I boot in the morning, and no Indesign program is open yet, whenever I double-click on an Indesign file, the system will open it with CS5, no matter if the file is CS4 or CS5. I find this quite annoying, of course. I want each version file to get open right away in the proper version of the program. I'd think this is happening to a lot of people, but I've been looking for the issue in the forums and haven't found anything.
Of course I'm using roundabouts like having my colleague write "_CS5" at the end of each file, put CS4 in my startup items (so that once the program is open, the issue works the other way around and any Indesign file opens just in CS4 when double-clicked…).
Also, all the Indesign files appear on the desktop as CS5 files
I would welcome any ideas on the subject, thanks!

Muchas gracias! really useful. I'm gonna try it.

Show long text for Quality Notification when double click field in alv

I have an ALV grid called using a FM and I am using the user command routine to do somthing when a particular cell is clicked. I want to call up the root cause text from the action box of the QN via QM03 . I am building a BDC table to call with a CALL transaction but when I write my BDC up to that point, the program is running the BDC but not going to the point where the long text is displayed is i am in mode 'N'.
FORM user_command USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
READ TABLE itab INDEX rs_selfield-tabindex.
CASE r_ucomm.
    WHEN '&IC1'.
      CASE rs_selfield-fieldname.
* When double click on root cause, display root cause long text
        WHEN 'ZZ_URCOD'.
          PERFORM display_root_cause_text.
          CALL TRANSACTION 'QM03' USING gt_bdc MODE 'N'.
ENDCASE.
ENDFORM.                    "user_command
FORM display_root_cause_text .
FREE gt_bdc.
PERFORM fill_bdc USING 'SAPLIQS0'     '0200'      'X'.
PERFORM fill_bdc USING 'RIWO00-QMNUM' itab-qmnum space.
PERFORM fill_bdc USING 'SAPLIQS0'     '7200'      'X'.
PERFORM fill_bdc USING 'BDC_OKCODE' '=10\TAB03' space.
PERFORM fill_bdc USING 'SAPLIQS0'     '7200'      'X'.
PERFORM fill_bdc USING 'BDC_CURSOR'
                         'QMICON-LTURSACHE(01)'     space.
PERFORM fill_bdc USING 'BDC_OKCODE' '=UX01' space.
ENDFORM.                    " DISPLAY_ROOT_CAUSE_TEXT
Any one have any suggestions of know of a BAPI that I can achieve the same thing?
Thanks
Larissa Maryniuk

Hello,
also try to use the messages clause (of type BDCMSGCOLL).
This will return the system messages.
call transaction 'XXXX' using BDCTAB
                                        mode 'P'
                                        messages into MSG_TAB.
Try to change the mode from 'N' to 'P' and try to place a breakpoint and check what happens.
Alternatively, you can read the Quality Notification text using FM READ_TEXT, and then show this data to the user in pop-up, rather than calling the tx.
Hope this helps.

Weird error -43, when double-clicking a numbers document in finder

Similar Messages

Maybe you are looking for