Weird Error Code - Easter Egg?
Hi,
I came across this blog post today discussing on record field properties.
http://thinktibits.blogspot.com/2010/04/peoplesoft-record-field-properties.html
What was little fascinating was the easter egg kind of error messages, that pop up on the field change event (PT8.46).. For example;
Error (Len(TEST_REC.FIELD1.Value));
2PeopleCode (180,2)
When does this occur; is it local to a PeopleSoft environment? Has somebody experienced it?
Also, the value "PeopleCode" is stored in the message catalog entry (180, 2).
Thanks,
Edited by: user2251498 on Apr 27, 2010 3:39 AM
Edited by: user2251498 on Apr 28, 2010 3:23 PM
Hi and Welcome to the Forums!
Anytime random strange behaviors creep in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
I can access the itunes store, but when i try an download something it says..an unknown error occurred (5002)..anyone know what this is? And when I try to download it from itunes from my iphone it says..valid address required for purchasing with store credit..even tho i've never used store credit before...anyone know how i can fi this?
Hi and Welcome to the Forums!
Anytime random strange behaviors creep in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
So I just transfered my music from one computer to another using a external hard drive. When I went to the store I noticed a "swiping" sound (the sound you would hear when wiping glass basically) when ever I clicked any of the buttons in the store. Music, books, purchased...and it's only in iTunes. When I try to re-download songs from the purchased section it takes forever to load then says error code 3131. I tried downloading the newest version of itunes and then restarting my computer but neither helped.
I have a toshiba satellite that runs Windows 8.
Please help me!FWIW, my problem downloading previously purchased music from iCloud appears to be resolved. To clarify my issue, and also to differentiate it from similar issues:
My error code was not 3131; “(3131)” appears at the end of the error message that was popping up when I tried to access purchased music. An Express Lane tech verified that I was receiving error 3259 (although this didn’t appear on-screen).
I have two machines but only one Apple ID, have not yet installed Lion, and purchased all of my music by individual song (no albums).
What I did:
Boot in Safe Mode
Ran Disk Utility
Installed latest version of iTunes (10.4)
Re-booted in Safe Mode (which disables anti-virus software and other utilities such as Little Snitch)
Turned off Firewall temporarily
Launched iTunes
When I launched iTunes in Safe Mode, my Purchased items did show up and I was able to download several songs. I rebooted in normal mode, turned Firewall back on and re-enabled Sophos Anti-Virus, Little Snitch, and the adware/malware programs I usually run; I’m still able to see and download my Purchased music (as well as apps and books).
I don’t know what really “fixed” the problem, but the Express Lane tech suggested that firewalls, web accelerators, ad filters or virus protection software might be involved. Express Lane wasn’t very “Express;” it took a week and a half and several complaints to get things moving. -
FPGA Code Generation fails with error codes 7 and -1
Hi all,
I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This happens no matter what I am trying to compile even a VI with just a while loop. I followed the discussion forum here without any luck, also followed the NI article here and that did not help either. The error codes always get generated at the start of the Generating Intermediate files step #7 (out of 7).
Attached to this post is a screenshot of the error I am getting (error -1 just says internal error and to contact NI support), bellow is basically the error I get for error code 7
An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Read from Text File in nirviGetInstantiation_cRIO-IDSel_Timer.vi->nirviGetInstantiation_cRIO-IDSel_Timer.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
C:\NIFPGA\compilation\cRioController_8-SlotFPGA_FPGA-TriggerTest_C06156E2\IDSel_Timer.vhd
I tried to do some digging to see what could possibly be happening, and I noticed that LV is looking for the vhdl files in the wrong folder (see the line highlighted in red above), when generating the vhdl files, LV will place them inside the "source_files" folder under the compilation project, but for some reason it is trying to find them under the root folder not inside the source_files folder!!!
Does anyone have any idea why LV would be looking for these files in the wrong subfolder?
Thank you,
Aws
Attachments:
Code Generation Errors.png 35 KBHi Aws_Khudhair,
What version of LabVIEW are you using? And what version of the FPGA module? From what I found, it seems as though this is primarily an issue with LabVIEW 8.6 and 8.6.1.
http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
This forum also discusses a similar issue:
http://forums.ni.com/t5/Real-Time-Measurement-and/FPGA-compile-errors-after-generating-intemediate-f...
It may also be worth repairing/reinstalling the FPGA Module and the Xilinx compile tools.
Catherine B.
Applications Engineer
National Instruments -
hello,
i have the ORA-00600: internal error code, arguments: [4553], [2], [0], [], [], [], [], [] in my alert.log file. One resolution is to recreate the invalid objects, but this error is recurring frequently. In touch with oracle. has anyone faced this issue, what could be the problem?
thanks in advance.
Starting up ORACLE RDBMS Version: 10.1.0.4.0.
System parameters with non-default values:
processes = 300
shared_pool_size = 83886080
large_pool_size = 8388608
java_pool_size = 50331648
nls_language = american
nls_territory = america
sga_target = 369098752
control_files = O:\ORACLE\DATABASE\CONTROL01.CTL, O:\ORACLE\DATABASE\CONTROL02.CTL, O:\ORACLE\DATABASE\CONTROL03.CTL
db_block_size = 8192
db_cache_size = 25165824
compatible = 10.1.0.2.0
db_file_multiblock_read_count= 16
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
shared_servers = 0
job_queue_processes = 10
background_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL\CDUMP
sort_area_size = 65536
db_name = ORCL
open_cursors = 1000
pga_aggregate_target = 25165824
LGWR started with pid=5, OS id=136
SMON started with pid=7, OS id=3524
RECO started with pid=8, OS id=3244
CJQ0 started with pid=9, OS id=420
Thread 1 advanced to log sequence 14383
Current log# 1 seq# 14383 mem# 0: O:\ORACLE\DATABASE\REDO11.LOG
Current log# 1 seq# 14383 mem# 1: O:\ORACLE\DATABASE\REDO12.LOG
Sat Nov 08 12:45:45 2008
Private_strands 15 at log switch
Thread 1 advanced to log sequence 14384
Current log# 2 seq# 14384 mem# 0: O:\ORACLE\DATABASE\REDO21.LOG
Current log# 2 seq# 14384 mem# 1: O:\ORACLE\DATABASE\REDO22.LOG
Sat Nov 08 13:15:31 2008
Errors in file d:\oracle\product\10.1.0\admin\orcl\udump\orcl_ora_4084.trc:
ORA-00600: internal error code, arguments: [4553], [2], [0], [], [], [], [], []
Sat Nov 08 13:19:42 2008
Doing block recovery for file 2 block 332
Block recovery range from rba 14384.24287.0 to scn 0.368893505
Sat Nov 08 13:19:43 2008
Recovery of Online Redo Log: Thread 1 Group 2 Seq 14384 Reading mem 0
Mem# 0 errs 0: O:\ORACLE\DATABASE\REDO21.LOG
Mem# 1 errs 0: O:\ORACLE\DATABASE\REDO22.LOG
Block recovery completed at rba 14384.24315.16, scn 0.368893506
Doing block recovery for file 2 block 97
Block recovery range from rba 14384.13864.0 to scn 0.368893505
Sat Nov 08 13:19:44 2008
Recovery of Online Redo Log: Thread 1 Group 2 Seq 14384 Reading mem 0
Mem# 0 errs 0: O:\ORACLE\DATABASE\REDO21.LOG
Mem# 1 errs 0: O:\ORACLE\DATABASE\REDO22.LOG
Block recovery completed at rba 14384.24315.16, scn 0.368893506
Doing block recovery for file 5 block 651570
Block recovery range from rba 14384.24287.0 to scn 0.368893508
Sat Nov 08 13:19:45 2008
Recovery of Online Redo Log: Thread 1 Group 2 Seq 14384 Reading mem 0
Mem# 0 errs 0: O:\ORACLE\DATABASE\REDO21.LOG
Mem# 1 errs 0: O:\ORACLE\DATABASE\REDO22.LOG
Block recovery completed at rba 14384.24373.16, scn 0.368893509
Sat Nov 08 13:19:46 2008
Errors in file d:\oracle\product\10.1.0\admin\orcl\udump\orcl_ora_4084.trc:
ORA-00600: internal error code, arguments: [4553], [2], [0], [], [], [], [], []
Doing block recovery for file 2 block 704
Block recovery range from rba 14384.24391.0 to scn 0.368893512
Sat Nov 08 13:23:27 2008
Recovery of Online Redo Log: Thread 1 Group 2 Seq 14384 Reading mem 0
Mem# 0 errs 0: O:\ORACLE\DATABASE\REDO21.LOG
Mem# 1 errs 0: O:\ORACLE\DATABASE\REDO22.LOG
Block recovery completed at rba 14384.24419.16, scn 0.368893513
Doing block recovery for file 2 block 41
Block recovery range from rba 14384.24469.0 to scn 0.368894006
Sat Nov 08 13:32:29 2008
Recovery of Online Redo Log: Thread 1 Group 2 Seq 14384 Reading mem 0
Mem# 0 errs 0: O:\ORACLE\DATABASE\REDO21.LOG
Mem# 1 errs 0: O:\ORACLE\DATABASE\REDO22.LOG
Block recovery completed at rba 14384.25039.16, scn 0.368894007
Doing block recovery for file 5 block 651570
Block recovery range from rba 14384.24287.0 to scn 0.368893508
Sat Nov 08 13:32:30 2008
Recovery of Online Redo Log: Thread 1 Group 2 Seq 14384 Reading mem 0
Mem# 0 errs 0: O:\ORACLE\DATABASE\REDO21.LOG
Mem# 1 errs 0: O:\ORACLE\DATABASE\REDO22.LOG
Block recovery completed at rba 14384.24373.16, scn 0.368893509
Sat Nov 08 13:45:44 2008
Private_strands 15 at log switch
Thread 1 advanced to log sequence 14385
Current log# 3 seq# 14385 mem# 0: O:\ORACLE\DATABASE\REDO31.LOG
Current log# 3 seq# 14385 mem# 1: O:\ORACLE\DATABASE\REDO32.LOG
Sat Nov 08 14:31:08 2008
Private_strands 15 at log switch
Thread 1 advanced to log sequence 14386
Current log# 1 seq# 14386 mem# 0: O:\ORACLE\DATABASE\REDO11.LOG
Current log# 1 seq# 14386 mem# 1: O:\ORACLE\DATABASE\REDO12.LOG
Sat Nov 08 15:01:31 2008
Errors in file d:\oracle\product\10.1.0\admin\orcl\udump\orcl_ora_4048.trc:
ORA-00600: internal error code, arguments: [ktspgfb-1], [], [], [], [], [], [], []
orcl_ora_4048.trc:
*** SERVICE NAME:(SYS$USERS) 2008-11-08 13:15:30.942
*** SESSION ID:(303.2) 2008-11-08 13:15:30.942
*** 2008-11-08 13:15:30.942
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [4553], [2], [0], [], [], [], [], []
Current SQL statement for this session:
INSERT INTO ssv_tav_basic VALUES(:v1,TO_DATE(:v2,'DD-MM-YYYY HH24:MI:SS'),:v3,:v4,:v5,:v6,TO_DATE(:v7,'DD-MM-YYYY HH24:MI:SS'),:v8,:v9,:v10,:v11)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedmp+576 CALLrel ksedst+0 0
ksfdmp.160+14 CALLrel ksedmp+0 3
_kgeriv+139 CALLreg 00000000 7FD3170 3
kgeasi+92 CALLrel kgeriv+0 7FD3170 7ECE838 11C9 2
8752BEC
ktbtas+149 CALLrel kgeasi+0 7FD3170 7ECE838 11C9 2 2 0 2
0 0 0 0
ktbair2+413 CALLrel ktbtas+0 17614014 30 875369C
kdxlne+517 CALLrel ktbair2+0
kcoissue_callback CALLreg 00000000 7F2CFA4 7F2CFE6 4 17614014
+153 875369C
kcoapl+751 CALLrel kco_issue_callback 7F2CFA0 17614000 875369C
+0
kcbapl+119 CALLrel kcoapl+0 7F2CFA0 17614000 1 5 2000 0
875369C
kcrfwredo_gen+255 CALLrel _kcbapl+0 7F2CFA0 177F4E90 8753180 0
4 875369C
kcbchg1+7688 CALLrel kcrfw_redo_gen+0
ktuchg+874 CALLrel kcbchg1+0 0 3 8753264 875327C 0 0
ktbchg2+115 CALLrel ktuchg+0 2 5B06C88 3 7F2D000 7F2D008
7F2A7A0 875369C 7F2CFA0 0 0
kdisnewle+1681 CALLrel ktbchg2+0 0 5B06C88 7F2D000 7F2D008
7F2A7A0 8753694 7F2CFA0 0 0
kdisle+4004 CALLrel kdisnewle+0 5B06C7C 149C3C3 8753694
8753730 7F28764 A4 9D 0 2 0 0
0 8753938
kdiins0+6796 CALLrel kdisle+0 2EB6AAAC 8753C98 87541A4 1 2
8756AB0 140 875D664 342C9238
0 0 0
kdiins+52 CALLrel kdiins0+0 2EB6AAAC 6 875D664 8756AB0 0
0 0 2 FF 0 0 0 0
kauxsin+4814 CALLrel kdiins+0 2EB6AAAC 6 875D664 8756AB0 2
FF 0 0
insidx.103+884 CALLrel kauxsin+0 2EB6AA5C 875D660 0 7F46984
7F469B4 7F469CC 7F46958 0 0 0
0 0 0 0 0 2C04A990 B D218 1 0
0
insrowFastPath.103 CALLrel insidx.103+0 7F468B4
+189
insdrvFastPath.103 CALLrel insrowFastPath.103 7F468B4 875D864 0 7F468B4
+357 +0
inscovexe+916 CALLrel insdrvFastPath.103 7F468B4
+0
_insExecStmtExecIni CALL??? 00000000 1C8C07CC 2395C188 875DC70
Engine.103+54
insexe+232 CALLrel insExecStmtExecIni 1C8C07CC 2395C188 875DC70
Engine.103+0
opiexe+12507 CALLrel insexe+0 2EC98954 875DC70
_opiodr+973 CALLreg 00000000 4 4 875E7D0
_ttcpip+1830 CALLreg 00000000 4 4 875E7D0 3
_opitsk+1098 CALL??? 00000000
opiino+938 CALLrel opitsk+0 0 0 7FD9BB0 7E5EEF8 DF 0
_opiodr+973 CALLreg 00000000 3C 4 875FBC0
opidrv+479 CALLrel opiodr+0 3C 4 875FBC0 0
sou2o+45 CALLrel opidrv+0 3C 4 875FBC0
opimai+237 CALLrel sou2o+0
OracleThreadStart@ CALLrel opimai+0
4+910
77E64826 CALLreg 00000000hello satish,
thank you for your kind advice. the reason i posted this is because we have been having this issue for a long time. and so far its been a chicken-egg issue, maybe its hardware, or the application, or the OS, etc..etc..
so, i am looking for any experiences with the 600 error, perhaps similar to mine. -
Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssisHi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan -
as mentioned in the title, I have encountered 2 errors, one is when I am trying to restore my iphone and the other when iTunes diagnotics feature is ran..
I have read the information about the diagnostics result and saw something like "connection attempt to firmware update server unsuccessful". Because of this information I have concluded that the "error code 3194" happens because iTunes itself is unable to connect to the "firmware update server".
I am using Windows 7 64-bit and iTunes is now on the latest version.
below are the things I have done so far, but to no avail:
- removed/disabled my antivirus program
- put iTunes to exception list of WIndows Firewall
- disabled windows firewall and windows defender
- re-installed iTunes and made sure that it is of the latest version (version 10.6.1)
- performed recommendation from: https://discussions.apple.com/message/17409780#17409780
- perform flush dns command using command prompt
In addition to the steps I mentioned, I also tried running the diagnostics on two other computers running on different versions on iTunes, 10.5 and 10.6.0. I also did the same steps as above on these two computers, but I am getting the "secure connection to iTunes store failed" when the diagnostics were ran.
thanks for any help that you can give.I think its weird that I experienced both the 3194 error code and "secure link to the itunes store failed" diagnostics error on three computers running on different OS (XP, vista and 7), itunes version and connectivity types (wireless and cabled). Could it be possible that there is a problem on Apple's server?
Are you still there, shintenhouji?
Perhaps try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(I've seen a few cases in recent times of this sort of thing being associated with LSP issues.) -
Trying to install AirPort Utility on Vista laptop, get error code 2318
Error code pops up during installation saying
"The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2318."
Anyone familiar with it? Need help setting up Express to Vista laptop because keeps flashing amber. Thanks!After investigation the complete error message from Windows is:
Event Type: Error
Event Source: MsiInstaller
Event Category: None
Event ID: 10005
Date: 24-Nov-07
Time: 18:12:48
User: INTL\hdevilmorin
Computer: HLVI-X1
Description:
Product: AirPort -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2318. The arguments are: C:\Program Files\dns_sd.jar, ,
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 36 43 46 43 46 39 46 {6CFCF9F
0008: 44 2d 46 33 42 38 2d 34 D-F3B8-4
0010: 34 34 38 2d 39 37 39 34 448-9794
0018: 2d 35 44 42 42 33 45 36 -5DBB3E6
0020: 39 45 42 34 34 7d 9EB44}
So I have copied the dns_sd.jar file in the C:\Program Files\ folder (found in a Bonjour folder) and relaunched the installation. Then miracle! It worked. So as weird as your experience! -
When i run the sequence with ivi step types in simulation mode i get the error Types do not mathc. The step that generates this error is an IviScope step type and is configured as a measurement. Th weird thing is that in real mode is working perfectly. I have three measure steps and i get the error in all of them. The exact error message is:
UUT Result: Error, Error executing substep 'Post'. An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types 1.0 Type Library' An error occurred while executing the step. Component Works IVI Control Error: The IVI Read operation failed on channel '1' for logical name 'SampleScope'. Details: (1
) Types do not match. [IVI Error Code: BFFA0015] Source: TSIviStepTypes [Error Code: -30721, User-defined error code.]
Can someone tell me how to fix this problem?. It seems to me that the simulation generates a diferent type of measurement of that generated in real mode.Update:
The simulation driver appears to be raising the error. By switching to specific driver simulation the error does not occur. This may be a problem in either the class simulation driver or the specific driver.
Scott Richardson
National Instruments -
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d03b7cd, pid=2752, tid=2804
# Java VM: Java HotSpot(TM) Client VM (11.0-b12 mixed mode, sharing windows-x86)
# Problematic frame:
# C [awt.dll+0x3b7cd]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x02ee4400): JavaThread "AWT-Windows" daemon [_thread_in_native, id=2804, stack(0x03220000,0x03270000)]
siginfo: ExceptionCode=0xc0000005, writing address 0xe1fe8c80
Registers:
EAX=0x17e4d6c4, EBX=0x00000bf4, ECX=0x00000100, EDX=0xe1fe8c80
ESP=0x0326f3a4, EBP=0x00000400, ESI=0x17e4d6c4, EDI=0xe1fe8c80
EIP=0x6d03b7cd, EFLAGS=0x00010206
Top of Stack: (sp=0x0326f3a4)
0x0326f3a4: 0326f47c 00000100 0326f484 00000100
0x0326f3b4: 6d0a462a 00000400 00000400 00000100
0x0326f3c4: 00000100 0326f600 0326f400 00000000
0x0326f3d4: 00000000 00000100 02be8828 00000100
0x0326f3e4: 00000400 e1fe8c80 0010e4c0 00000000
0x0326f3f4: 00000000 00000100 00000100 00000000
0x0326f404: 00000000 00000100 00000100 00000000
0x0326f414: 00000000 00000004 00000400 00000000
Instructions: (pc=0x6d03b7cd)
0x6d03b7bd: 00 00 00 8b 4c 24 14 8b e9 c1 e9 02 8b f0 8b fa
0x6d03b7cd: f3 a5 8b cd 83 e1 03 f3 a4 8b 74 24 18 8b 4c 24
Stack: [0x03220000,0x03270000], sp=0x0326f3a4, free space=316k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [awt.dll+0x3b7cd]
[error occurred during error reporting (printing native stack), id 0xc0000005]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.awt.windows.WToolkit.eventLoop()V+0
j sun.awt.windows.WToolkit.run()V+69
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02f00400 JavaThread "Thread-6" daemon [_thread_blocked, id=4036, stack(0x04050000,0x040a0000)]
0x02fd5c00 JavaThread "Thread-5" daemon [_thread_blocked, id=3692, stack(0x03990000,0x039e0000)]
0x02fe7c00 JavaThread "Thread-4" daemon [_thread_in_native, id=2840, stack(0x03940000,0x03990000)]
0x02fcb000 JavaThread "Thread-3" daemon [_thread_blocked, id=2820, stack(0x038f0000,0x03940000)]
0x02fa8000 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=2000, stack(0x03870000,0x038c0000)]
0x00396400 JavaThread "DestroyJavaVM" [_thread_blocked, id=2360, stack(0x003b0000,0x00400000)]
0x02f6d800 JavaThread "TimerQueue" daemon [_thread_blocked, id=2228, stack(0x03670000,0x036c0000)]
0x02f6ac00 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=580, stack(0x03620000,0x03670000)]
=>0x02ee4400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=2804, stack(0x03220000,0x03270000)]
0x02ec7000 JavaThread "AWT-Shutdown" [_thread_blocked, id=3564, stack(0x031d0000,0x03220000)]
0x02e94000 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1264, stack(0x03180000,0x031d0000)]
0x02e9e400 JavaThread "EventQueue" daemon [_thread_blocked, id=728, stack(0x030e0000,0x03130000)]
0x02b21400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2384, stack(0x02dd0000,0x02e20000)]
0x02b1b000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1532, stack(0x02d80000,0x02dd0000)]
0x02b19800 JavaThread "Attach Listener" daemon [_thread_blocked, id=3844, stack(0x02d30000,0x02d80000)]
0x02b18400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3968, stack(0x02ce0000,0x02d30000)]
0x02b13400 JavaThread "Finalizer" daemon [_thread_blocked, id=2356, stack(0x02c90000,0x02ce0000)]
0x02b0ec00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2644, stack(0x02c40000,0x02c90000)]
Other Threads:
0x02b0d000 VMThread [stack: 0x02bf0000,0x02c40000] [id=1772]
0x02b23400 WatcherThread [stack: 0x02e20000,0x02e70000] [id=2316]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 960K, used 761K [0x16960000, 0x16a60000, 0x17d10000)
eden space 896K, 77% used [0x16960000, 0x16a0e630, 0x16a40000)
from space 64K, 99% used [0x16a40000, 0x16a4fff8, 0x16a50000)
to space 64K, 0% used [0x16a50000, 0x16a50000, 0x16a60000)
tenured generation total 11972K, used 8697K [0x17d10000, 0x188c1000, 0x26960000)
the space 11972K, 72% used [0x17d10000, 0x1858e578, 0x1858e600, 0x188c1000)
compacting perm gen total 12288K, used 5163K [0x26960000, 0x27560000, 0x2a960000)
the space 12288K, 42% used [0x26960000, 0x26e6afd8, 0x26e6b000, 0x27560000)
ro space 8192K, 63% used [0x2a960000, 0x2ae6bdf8, 0x2ae6be00, 0x2b160000)
rw space 12288K, 52% used [0x2b160000, 0x2b7ba3c8, 0x2b7ba400, 0x2bd60000)
Dynamic libraries:
0x00400000 - 0x00424000 C:\WINDOWS\system32\javaw.exe
0x7c900000 - 0x7c9b5000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c900000 C:\WINDOWS\system32\kernel32.dll
0x77f40000 - 0x77feb000 C:\WINDOWS\system32\ADVAPI32.dll
0x77da0000 - 0x77e32000 C:\WINDOWS\system32\RPCRT4.dll
0x77f10000 - 0x77f21000 C:\WINDOWS\system32\Secur32.dll
0x7e390000 - 0x7e421000 C:\WINDOWS\system32\USER32.dll
0x77e40000 - 0x77e89000 C:\WINDOWS\system32\GDI32.dll
0x76330000 - 0x7634d000 C:\WINDOWS\system32\IMM32.DLL
0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll
0x6d800000 - 0x6da56000 C:\Program Files\Java\jre6\bin\client\jvm.dll
0x76af0000 - 0x76b1e000 C:\WINDOWS\system32\WINMM.dll
0x6d280000 - 0x6d288000 C:\Program Files\Java\jre6\bin\hpi.dll
0x76bb0000 - 0x76bbb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll
0x6d320000 - 0x6d33f000 C:\Program Files\Java\jre6\bin\java.dll
0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll
0x6d000000 - 0x6d136000 C:\Program Files\Java\jre6\bin\awt.dll
0x72f70000 - 0x72f96000 C:\WINDOWS\system32\WINSPOOL.DRV
0x77be0000 - 0x77c38000 C:\WINDOWS\system32\msvcrt.dll
0x774a0000 - 0x775dd000 C:\WINDOWS\system32\ole32.dll
0x5b190000 - 0x5b1c8000 C:\WINDOWS\system32\uxtheme.dll
0x6d220000 - 0x6d274000 C:\Program Files\Java\jre6\bin\fontmanager.dll
0x10000000 - 0x10171000 C:\WINDOWS\system32\nview.dll
0x77e90000 - 0x77f06000 C:\WINDOWS\system32\SHLWAPI.dll
0x7c9c0000 - 0x7d1e2000 C:\WINDOWS\system32\SHELL32.dll
0x770e0000 - 0x7716b000 C:\WINDOWS\system32\OLEAUT32.dll
0x5d4e0000 - 0x5d57a000 C:\WINDOWS\system32\COMCTL32.dll
0x77bd0000 - 0x77bd8000 C:\WINDOWS\system32\VERSION.dll
0x77390000 - 0x77493000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\comctl32.dll
0x77650000 - 0x77671000 C:\WINDOWS\system32\NTMARTA.DLL
0x71b80000 - 0x71b93000 C:\WINDOWS\system32\SAMLIB.dll
0x76f20000 - 0x76f4d000 C:\WINDOWS\system32\WLDAP32.dll
0x03380000 - 0x033ce000 C:\WINDOWS\system32\NVWRSNL.DLL
0x746a0000 - 0x746ec000 C:\WINDOWS\system32\MSCTF.dll
0x03410000 - 0x0346d000 C:\Program Files\Actual Window Minimizer\awmemb.dll
0x75250000 - 0x7527e000 C:\WINDOWS\system32\msctfime.ime
0x4fd10000 - 0x4feb6000 C:\WINDOWS\system32\d3d9.dll
0x6deb0000 - 0x6deb6000 C:\WINDOWS\system32\d3d8thk.dll
0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll
0x71a30000 - 0x71a47000 C:\WINDOWS\system32\WS2_32.dll
0x71a20000 - 0x71a28000 C:\WINDOWS\system32\WS2HELP.dll
0x6d630000 - 0x6d639000 C:\Program Files\Java\jre6\bin\nio.dll
0x036d0000 - 0x036e5000 C:\WINDOWS\system32\nvwddi.dll
0x719d0000 - 0x71a10000 C:\WINDOWS\System32\mswsock.dll
0x76ee0000 - 0x76f07000 C:\WINDOWS\system32\DNSAPI.dll
0x76f70000 - 0x76f78000 C:\WINDOWS\System32\winrnr.dll
0x16080000 - 0x160a5000 C:\Program Files\Bonjour\mdnsNSP.dll
0x76d20000 - 0x76d39000 C:\WINDOWS\system32\Iphlpapi.dll
0x76f80000 - 0x76f86000 C:\WINDOWS\system32\rasadhlp.dll
0x61200000 - 0x61259000 C:\WINDOWS\system32\hnetcfg.dll
0x71a10000 - 0x71a18000 C:\WINDOWS\System32\wshtcpip.dll
VM Arguments:
jvm_args: -Xmx256m
java_command: com.speljohan.rsbot.Application GUIController nonmembers
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\TortoiseSVN\bin;C:\Program Files\QuickTime\QTSystem\
USERNAME=gavin van der star
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 4, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 2 (2 cores per cpu, 1 threads per core) family 15 model 6 stepping 4, cmov, cx8, fxsr, mmx, sse, sse2, sse3
Memory: 4k page, physical 2095532k(1209308k free), swap 4032792k(3244508k free)
vm_info: Java HotSpot(TM) Client VM (11.0-b12) for windows-x86 JRE (1.6.0_10-beta-b25), built on May 29 2008 00:51:46 by "java_re" with MS VC++ 7.1
time: Thu Nov 20 17:54:40 2008
elapsed time: 9 secondsprakashdewangan wrote:
This is not a weird error... This is Java HotSpot... It comes when java is unable to continue run and it has to Exit. Like in windows you would have seen error box when program terminates.
The posted trace is from a windows box.
Java HotSpot generely I have seen because of Too High CPU usage (and memory too). Java does not get enough resource to run... Please check your code where is the Loop which needs high resource... try to refactor that code...No.
Standard general causes of this.
- Use of JNI or a third party library that uses JNI
- A combination of video drivers, video card and fonts. This one is less prevalent than it used to be.
- Bad environment, memory, installs, programs, etc.
- Bug in the VM.
Presuming in your reported case that none of the other causes applied then you found a bug in the VM. That doesn't mean that anyone else found the same one. -
Hi there,
I am trying to install Windows 7 on a physical machine from Configuration Manager via OSD Deployment. As soon after the computer finishes loading the boot.wim file the following error is popping up
Your PC needs to restart.
Please hold down the power button.
Error Code: 0x000000C4
Parameters:
0x0000000000000091
0x000000000000000F
0xFFFFF8011A5C4A80
0x0000000000000000
Can anybody help please
RegardsNote it is not advised to run WAIK and ADK on the same SCCM server so install WAIK on another device.
Actually, it's not possible to install them both on the same system to my knowledge. Also, each version of ConfigMgr requires a specific version of the AIK or ADK so installing another one would cause weird issues.
Ultimately, this is why I was asking about the version of the boot image though as many/most older CPUs do not support the NX or SSE requirements of Win 8.x which the boot images created using the ADK 8.x are based upon.
Assuming this is the case, you must install SP1 CU3 or R2 and then you can import (and be fully supported) a down-level boot image that will support your CPU.
Jason | http://blog.configmgrftw.com -
Ok back again with 55 error code endless on and off loop
So a few days ago i decided to clean up the computer. Removed/reinstalled/cleaned video card, 2 fans attached to a tall finned CPU cooler (to clean out the cooler fins) with q-tip and compressed air can, and remove filters and some fans to clean. All done with comp air cans and q tips. Had my anti static wristband attached and on a clean table with tile floors. Had to remove 2 sticks of RAM to get one of the fans.
Also decided to add an ssd while i was at it. All went well except i couldn't get into the bios. Booted to windows fine but hung just after del key press just b4 bios setup. Posted in the Bios section for help and I was told to disconnect all hdd's and optical drive and try again. That worked. Reconnected optical...didnt work. Tried just HDD and it worked. Re connected the optical and it worked. Used the same ports as original (when this all started) and it worked. Weird but good to go. Connected SSD, configured windows to "see" the drive, all is good. Then I disconnected the computer, cleaned up a little of the wiring after the new ssd install (nothing was removed or reconnected) and one fan. Put the covers back on reconnected cables and went to bed.
The next day I go to turn on the computer and i get the dreaded 55 error code and have an endless 3-5 second loop of on and off before it even gets to the splash screen. TV shows nothing. Tried CMOS clear every which way. nothing. Disconnected all components except for 1 ram, and CPU....still nothing. Tried several sticks of ram in each. Nothing works. Tried different PSU's...same thing. Disconnected all USB cables, Mouse, and case switches, same thing. Bench tested mobo with different power supply same problem. Tried different power cords still no worky.
I dont know what to do. The mobo is still under warranty. Idk what I did to make it do this. Static, short while reconnecting audio out to a home amplifier. Static while cleaning up wiring? tried bios a and b, neither work.
Please help...I'm about to just go buy a new board and send this one back and have a spare.When I had the original problem, (not getting into the Bios but booted to OS fine) at the end of disconnecting and reconnecting, I had the HDD and Optical and new SSD connected like original and it worked when it didn't before being connected the same way. Just chalked it up to maybe not connecting something completely.
Now I'm starting to think the problems are related
So it worked BEFORE this latest problem. All I did then was add some zip ties to the new SSD cabling and put the panels back on. Didn't check to see if it worked after that, just assumed it did since I didn't do anything of significance.
Then this. I did think about the can of comp air and yes it can do that. I thought I was being careful enough to not let it do that with just short bursts.
I have not tried to remove and re-seat the CPU yet. I will try later and inspect the pins. At this point I think it can be attributed to one of the following things:
1. The EVO Hyper 212 did kind of twist a little (it always has a little when pressure is applied) and bent a socket pin. When I put the panels back on I did have to clean up one of the push/pull fan wires and did twist the EVO a little.
2. Something shorted/is shorting the board to do with the SATA connections. Maybe the SATA plug to board connection.
3. Compressed air shot out some frozen water and corroded some connection somewhere over night.
4. When plugging in the audio OUT from the back of the board to an amp Stereo L & R IN (converts to Surround Sound), the Amp was on and this jolted the board.
5. The compu-gods have decided to brick my mobo so as to have an excuse to buy a new one.
3 things I have learned. 1. Get a water cooler and not use the big tower coolers. 2. Don't use compressed air especially in swamp-ass Florida. 3. Make sure the crap you plug into the computer is OFF.
-
SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005
Hi
I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
In SMSTS log file error was "Release Request Failed with error code 0x80004005".
Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
Also make sure to update boot images, mdt packages, usmt etc. to new versions.
So thats what I'd try first....
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen -
Error Code 37 running labview 6 with windows XP
I've checked most of the posts concerning this Generic error code 37. Here is my dilemma..Currently running Labview 6 on a windows NT system. That computer is on its last legs and we want to upgrade to XP...I installed labview 6 on an XP machine and the program runs fine..and I actually get data from my external device except I get the ERROR 37...The big thing is I cannot run a SUBVI that creates a linear fit because once I get the error 37, the SUBVI stops. I can't understand how I can read data from my external device, yet get the device not found msg. I've even tried installing LV 7, and LV 8 yet get the same results.
Solved!
Go to Solution.Thanks for the information...Unfortunately I tried all the suggestions and still no luck. The weird thing is I can get individual data from the analog device to output from the VI (i get actual data to show where it is supposed to show in the output boxes), yet I still get the "ERROR 37" message. The one big problem is that I cannot standardize the device through the LV program and therefore the individual data is not calibrated properly. In the standardize VI, the programs runs through a series of samples, and creates a calibration curve. Then when we run individual analyses the calibration curve is used. The problem that occurs in the standardize VI is that the program doesn't advance past the first sample (error 37)so I cannot generate the calibration curve.
All of the suggestions are greatly aprreciated. What I really do not understand is that without changing anything (just copying files from one computer to another) how the error code comes about. One thing I am going to try over the weekend is to add another COMM port and see what happens.
This may seem ignorant, but How do you "CLOSE" a COMM port??? -
Weird error when clicking on instance- flow from the console
When I have heavy volume coming in for the bpel server(ex: hundreds of instances generated at a time), I see the following weird error when I am trying to see the instance flow from console:
Process state off. The process class "BugBAM" (revision "v2004_12_20__61032" ) has not been turned on. No operations on the process or any instances belonging to the process may be performed if the process is off. Please consult your administrator if this process has been turned off inadvertently.
I didn't do anything to the process to turn the state off. What does this error message mean?
Thanks, JennyI am assuming that you are using 10.1.2 beta 1. Is that correct? I am wondering if in that version there is a switch that turns a process off when a new version of the process is deployed (this would be a bug because the active process should only be switched to retired).
Next time you get this error, could you please go to the BPEL Console and check the state of the BPEL process.
We will try to trace the error message in the source code and try to determine if there are other circumpstances which would generate the same error code.
Edwin
Maybe you are looking for
-
Toolbar placement in 9.x Standard within IE8
I'm having a bit of difficulty with the configuration of a 3rd-party Acrobat plugin (msi installation package) and a custom registry value provided by the vendor that enables the enable the 'Comments and Markup' toolbar, for the Acrobat plugin in IE8
-
PC Permissions issues with 10.5 server
We are having some permission problems for our PC users. Here is what typically happens. User is working within a job folder. Within this job folder are a couple of other folders to organize the job parts. The user will modify some of the files and t
-
ITunes wont sync all documents to the iPad.
When i try to sync documents to the iPad then it won't do so with all the documents. Documents from Numbers, pages, etc wont arrive on the iPad. The iPad reacts, it says it is synchronizing, when a document is added or dropped on the list, but it won
-
Horrible formatting of code when using library assets
I'm using library assets to manage my navigation. I then insert the library asset into a template and use that template for creating content. The idea is that I add or remove a navigation entry in one place and it updates the entire site. That's work
-
My iPhone 5 crashed daily with Hotspot on
I use Hotspot daily to stream music. Every day it crashes and I have to do the reboot to get it back to life - works fine without hotspot