Weird error in series of weird errors

Hm, so, after installing iTunes 4.9, my computer freaked out and told me to update the software on my 3rd gen ipod, but when I tried it would not let me. After much finagalling, it is finally restored and has the right software on it. So now, when I connect to iTunes, I get this error:
http://www.pixentral.com/show.php?pic=1PZs7pFC122pVj8kzipMinxAoELgXI<"/>
How the heck do I fix this? My ipod is fine, no errors are present on the hard drive (I checked with defrag and such) and I've uninstalled and re-installed everything and its respective mother with no results.
Many thanks to anyone who can help me on this one.

hi Monika!
good gracious! (i can't cuss worth a darn in this dratted forum ...) i think that's actually a
b QuickTime
error. See if this fix works for you:
scuc, "Quicktime error - "no disk in the drive"", 11:25am Aug 9, 2005 CDT
love, b

Similar Messages

Weird system log error: EV_DELETE failed for file watcher

I just did a clean install of Snow Leopard (erased my hard disk before the installation using Disk Utility). I've run all the updates. I was experiencing some weird delay between the appearance of the blue screen and the appearance of the login window. The delay went away, but when I shutdown or restart, my system log has errors like this:
an 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 25
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 21
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 20
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 19
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 18
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 16
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 24
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 17
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 23
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 35
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 31
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 30
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 29
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 28
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 26
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 34
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 27
Jan 4 17:53:54 Musa com.apple.notifyd[11]: EV_DELETE failed for file watcher 33
Does anyone know what these mean? These do turn up on a Google search, but under systems prior to Snow Leopard! Remember that this is a completely clean system with no third-party software installed yet.

I get a series of eight EV_DELETE errors when ejecting my external FW800 drive. But not when mounting.
The drive also has a USB interface which I rarely use since the FW is much faster. I just tried mounting it using USB. Same behavior - no errors on the mount, but 8 EV_DELETE errors when I eject the drive.
The must be something sketchy with the file structure of the external drive (which is a SuperDuper clone of my internal hard drive).
SL 10.6.5, MacBook Pro with an external FW800/USB 500 GB drive (WiebeTech enclosure).

Weird error message from aplay

Got a new system this week and everything is set up and working, except a few weird audio glitches. Audio goes through the onboard HDMI thingie, but I'm not using HDMI; my monitor sends the HDMI signal to a different computer and VGA to my problem child. So HDMI audio is inactive. I finally got alsa and all the other audio apps to stop trying to use the nonexistent HDMI by default (resulting in a segfault) by simply deleting that module from libs/modules/{...} I set up /etc/asound.conf to identify the analog PCM as the default (card 2). But there's a further complication. I also have an external sound adapter plugged into USB for my podcast work, and it shows up as card #1.
Anyway, thanks to the default settings in asound.conf I can get most programs to send output to the analog onboard card and external speakers. But when I try to play a wave file with aplay, I get
aplay: set_params:1081: Sample format non available
That message came up in another thread in 2007, and the solution was to install an updated set of alsa-plugins... but pacman says mine are up to date and I assume any problem with them in 2007 is no longer an issue -- at any rate, aplay worked fine with wave files on my old PC. mpg123 plays mp3 files fine, and mplayer handles wave files (et al) fine... it's just aplay that's giving me grief.
I do *not* run jack, except during my podcast because idjc requires it.
Anyone else familiar with that error and can recommend a fix?

gday Andrew -
I believe that this is caused by setting the attribute exclusive-write-access=false in the orion-ejb-jar.xml file for your EJBs.
This is a known OC4J problem: a bug has been logged and it's been fixed here. The next minor release of OC4J will contain the fix for this.
In the meantime as a workaround removing the exclusive-write-access=false attribute from the orion-ejb-jar.xml files for your beans should get you going.
cheers!
-steve.
null

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
I hope someone is ably to help me ?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Weird Error!!cant figure it out

Good day ppl! i posted in the Vga section of this forum but noone seems to reply with a clear cut answer..someone said memtest and it reported no errors??pls read my post and give me a diagnosis!! ure help is very much appreciated!
i have a slight problem which i cant seem to find a solution to...
whenever i run games like Counterstrike 1.6 and Warcraft FT, a few mins in the game, i get a weird error which closes the application...the error is as follows:
Microsoft Visual C++ Runtime Library
Runtime Error !
Program D:\Valve\hl.exe
abnormal program termination
once this error shows, i have to click the OK button as nothin else can be clicked.on clicking another error appears....
CiceroUIWndFrame: hl.exe -Application Error
The instruction at "0x10232929" referenced memory at "0x10528688".The memory could not be read.
Click ok to terminate program..
I have to click ok and this terminates my game...becos of this problem i reinstalled my windows XP pro SP1 again and then reinstall my MSI gfx latest drivers again, then also reinstalled the games again.but it still keeps coming..PLS HELP ME!!!
any solution ppl...u all are geniuses as i have come to see and very helpful
MSI 875p Neo Fisr Bios 1.6
512 DDR 400 Twinmos Rams
MSI GF4 FX5600 VTD 128
i dont know but is this a problem with my vga card and if so how can it be solved..
ive run adware, spyware, antivirus, tuneup utilities 2003 to check for any possible errors or virus or worms or trojans but it all comes empty..i have pc-cillin 2003 also and ran a scandisk with no reported viruses..
my power supply is the Vantec ION 400 Wtt powersupply SATA ready..
3.3V 26A
5V 40A
12 16A
i have Twinmoss Pc3200 DDR 400 512 MB ram(single stick)--- no memory issue as of sort as i have more than 70% of it free whenver running windows and programs in the background...
i have 5 cooling fans including a Vantec Tornada( 3 intake and 2 exhaust) with 2 HDD( 80gb and 40gb barrcudas)
i hope this info will be good enuf for u ppl to diagnos my problem
again i thank u all for ure time

Agreed; Since the FX-5800 and up GPU's Require up to 7 Amps from the +12V Rail, then Yes 16 Amps is Very Light indeed , Dont Forget your P4 CPU under Stress (Gaming) Can require up to 10-11 Amps, combine that with the 7 Amps that your GPU May Require, and you are Over your +12V Rails Power capabilities...You should have at Least 20Amps on your +12V Rail, and because you are a Gamer! You should Have one of the Better PSU's Available that have 30 Amps + available on the +12V Rails. ie Enermax 465W or Antec 480W..............Sean REILLY875

Weird error -43, when double-clicking a numbers document in finder

Steps to repro:
0) open a finder window at the location (e.g. ~/Desktop) you are going to save your numbers document.
1) create a new numbers document.
2) save the document to the directory (e.g. ~/Desktop) that you have already displaying open in the finder (<- very important)
3) switch to the finder and double click the numbers document.
4) I get a error -43 at that point.
5) To get around the error you have to change the directory to one up and then back to where the numbers document is or switch the view mode (cmd-1, cmd-2, cmd-3) .
Looks like the finder has problems with recently saved numbers documents.
Even weirder:
Press cmd-I on the numbers document in the finder after you just saved it. The numbers document disappears and so doeas the Information dialog. What the heck?
Can anyone else repro this?

Thanks for trying.
I tried as well, now saving to the desktop, which is on a seperate volume.
I had the problem saving to the work volume.
It seems to have to do with permissions.
I checked "Ignore ownership on this volume" and applied it to all subdirs.
Seems to have solved the issue.

Using Site Content and Structure unable to move documents,pages and getting weird error message

Hi ,
earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
Now,we are getting a un-readable format error.
After selecting the destination we are getting the error.
and the file can't move.
What might me be the error.
Expecting answers related to my question.
1.As we can do using Internet Explorer,
2. Using Send To also we can move.
Using this Site Content and structure we can maintain Versoining also.
If any one face the same issue then we can easily find out the solution.
Regards ,
Prathap
SP Developer
Specify the destination to move the items you selected.

Hi,
Using Site Content and Structure unable to move documents,pages and getting weird error message
We are getting Below error:
When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
1576|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|cccccccccnncnnnnn|

7.1.1 iTunes Fails to Launch (No Error Message, Pretty Weird)

After downloading iTunes 7.1.1, I installed iTunes. The installation went well and everything was installed. I had no problem with installation.
However, after installing, I tried opening iTunes. However it fails to launch and I don't receive an error message.
When I open the Windows Task Manager and check out the processes, the iTunes.exe appears for 10 seconds and then disappears.
The weird thing is, is that iTunes version 4.0 works perfectly. (I think it's 4.0. It's the one that has the green note. The current versions have the blue note.)
I can open it up and play my music.
I have a Dell Dimension 8200 (It's about 6 years old.) The operation system is Windows XP.
Can someone explain and tell me how to fix this problem, so I can open iTunes 7.1.1.
Thanks.

However, after installing, I tried opening iTunes. However it fails to launch and I don't receive an error message.
When I open the Windows Task Manager and check out the processes, the iTunes.exe appears for 10 seconds and then disappears.
doublechecking one more thing that can help narrow in on possible culprits with these sorts of symptoms.
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)

Error message -50 ever since I installed new version of iTunes... weird!

A few days ago I installed the new/updated version of iTunes from the 'automatic prompt' which informed me there was a newer version of the software available.
Now, ever since I've been using iTunes upon start-up I get this weird thing happening:
1- ITunes opens, no problem
2- Progress bar appears on screen saying "Updating iTunes library" (which never happened before I installed the new version on iTunes)
3- An Error message appears saying "the iTunes Library files cannot be saved. An unknown error occurred (-50). Do not warn me again"
Well, my iPod seems to be sync-ing fine and I've not lost any music, so I'm confused as to what this error message actually means.
If anyone can shed any light on this or what I've done wrong I would be most grateful.
I don't fancy losing all my podcasts and music! Ouch...
Thanks!
MacBook Pro video iPod 80GB

I would check macfixit.com . there are several articles about fixing the -50 error. The latest article is free, the others require a subscription. This is from their very helpful site:
Another option for recreating the library to resolve -50 errors We previously reported that a full library deletion and restore may be required to eliminate -50 errors that occur while iTunes 7.3 is launching. The process we mentioned involves backing up the music library to another location, then deleting the original library and finally re-importing. However, you can also simply backup then create a new library at launch and re-import, as follows:
1. Quit iTunes
2. Backup your iTunes library (the folder ~/Music/iTunes) to a separate location (can be on the same volume)
3. Launch iTunes while holding down the option key and follow the steps to create a new library
4. In iTunes, choose Import from the FIle menu
5. Select the backed up ~/Music/iTunes as a source folder
6. Restore any deleted preferences
<<<br>
G5 1.6 Mac OS X (10.4.10)

Weird error message using phone as iPod

When I plug my iPhone into my car's iPod connection cord (which works fine with regular iPods and does not cause regular iPods to display any weird error messages), the iPhone says something about how "...that accessory does not work with the iPhone..." and asks me whether I want to switch to airplane mode. In spite of this weird message, I am able to play my music via the usual method in my car. Weird. Remedy?

Actually Human,
Many iPod accesories were not designed to operate in close proximity to a GSM phone. The iPhone is a GSM phone. There is a program for iPod accessory manufacturers to test and certify their accesories for use with the iPhone. This article contains more information:
http://docs.info.apple.com/article.html?artnum=305766
That being said, many will work without going into airplane mode, some will get interference from the GSM signal that will come through as a hum or sometimes popping noise. Since sending and receiving the GSM signal is needed to make calls, the iPhone can't be shielded to prevent interfering, the accessory needs to be.
This article contains more information on potential interference:
http://docs.info.apple.com/article.html?artnum=305662
The short answer is the car adapter may work without going into Airplane Mode, or it may have interference from the GSM signal at times.
Hope this helps,
Nathan C.

Weird error message on Adobe Reader XI installation.

I've just downloaded Adobe Reader XI and started to instal it but get this weird error message: "The ordinal 459 could not be located in the dynamic link library urlmon.dll". What does this mean and what can I do about it?

Hi EbSax,
Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
~Deepak

Error and weird behaviour in executable launch

Hello folks,
This post is regarding a weird behaviour i am experiencing with an executable i built.
LABVIEW version(Includes Runtime engine) LV2012 SP1 f3
DAQmx: 9.6.1
The behaviour is listed below in detail.
In a nutshell, the exectuable runs on the development computer but does not run on the Target computer. Also, Irresepctive of which PC i run the executable on, i cannot access the block diagram even after enabling debugging everywhere.
On the target PC, the app fires up but does not run further, no error codes appear on the screen, it's like the app freezes after firing up. And to add to the misery, i cannot access the block diagram to debug and know what's going on.
Also, I have tried including the dynamic vis to my build script. No bueno.
What I see on running the app is addressed below:
TARGET COMPUTER:
DAQmx 9.7 and LV2012 SP1 f4 RTE have been installed manually.
App does not run: No broken run button, the app launches but does nothing when the vi is run. No error messages.
The block diagram is still inaccessible, even after selecting the “Enable debugging” option in the build specifications.
DEVELOPMENT COMPUTER:
The app launches and runs perfectly.
The block diagram is still inaccessible, even after selecting the “Enable debugging” option in the build specifications.
DAQmx 9.7 and LV2012 SP1 f4 RTE were not installed as the app recognized the already installed Labview environment.
Additional steps that I have tried,
Created and ran only an executable on the target PC, the attempt was unsuccessful. The vi showed similar characteristics as mentioned above in the target PC section.
Created and ran an installer with additional install options(LV2012 f4 RTE and DAQmx 9.7)on the target PC, the attempt was again unsuccessful. The vi showed similar characteristics as mentioned above in the target PC section. No error messages.
Tried both the steps mentioned above on the development computer and the attempts were successful. .
To the best of my knowledge, I believe, the issue here is with the environment I am creating for the executable and the installer to run with/off of. After having carefully followed the installation procedure for the Run-Time Engine and the DAQmx drivers, I still do not know what I am missing.
Please advise.
Thanks guys,
RP.

Hey guys,
So, got the application to work. Almost.
The problem was that the executable was missing the hardware config from the Device.
Now, the new issue is as following:
The goal of the vi is to generate a report of the test conducted. So, the way the vi works is that, the second the vi is run, an empty word file is created with only the company logo,
Field headings, which are populated after the test is conducted.
The logo is a .jpg file, which has a relative path into the executable.
The field heading are String constants wired into a 'concatenate strings.vi' which are in turn wired to into the report generation vis.
What's happening is that when i run the app on the target pc, Only the logo appears on the word template. Even when i conduct the whole test and stop the vi, the results aren't populated in the word file. Which is a little weird.
Does any one know whats doing that?
Please refer to the attached word files.
Right - It is the file format desired.
Wrong - It is the file format achieved.
Please advise.
Thanks,
RP.
Attachments:
Right.docx ‏17 KB
Wrong.docx ‏16 KB

Weird HTML space %20 error after 10.6.5 update

I just updated our Snow Leopard Server to 10.6.5 for the many fixes within Podcast Producer. Unfortunately, I have came across a very weird error (or bug). All of our video podcast within the blogs were working fine before the update. Once updated, I scanned through our site to find some podcast posts not working. When you clicked on the .png, a quicktime icon with a ? showed up instead of the video. What was weird was that many other video podcast were working.
After looking at many things, I came across the issue. All the working video podcast had a single word for the name, all the non-working video podcasts had multiple words with spaces. I could edit the HTML within the blog post and remove the %20 and voila, the embedded video worked again.
Has anyone else experienced this with 10.6.5 or any other version? If so, is there a way to fix the issue without having to touch every single broken video post?

I am seeing exactly the same thing:
http://discussions.apple.com/thread.jspa?threadID=2645383&tstart=0
It seems as if the Podcast Library is now escaping spaces with a + instead of %20.
Like you, I'm able to restore the videos by directly editing the HTML and replacing %20 in the URL with a space. This is odd, because %20 is the absolutely correct way to escape spaces in URLs.
We have way too many posts to do this manually, and since English speaking human beings use spaces between words, most of our URLs are now broken.
Charles

Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

Hi There,
All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
Some of the specified files already exist in the target location. The files marked below will be replaced:
filename.eps
filename-01.eps
We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
All machines are new Quad-core MacPros running:
- Leopard 10.5.8
- Illustrator CS4 14.0.0
We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
Is anyone else experiencing this behavior?
Any help or pointers in the right direction would be much appreciated.
Cheers
Ben

Thanks for the reply.
The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
Why do we still use eps?
Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
Cheers, and thanks for the help.

Weird error in series of weird errors

Similar Messages

Maybe you are looking for