Weird Error Message (AroundMe...)

I installed AroundMe few weeks back in my iPhone and uninstalled it afterwards... Everything seemed fine except two weeks ago a message started to appear every time I try to install an application. The message read something like "AroundMe and 1 another application could not be purchased right now"... This message even appeared for free applications. I was able to install the applications anyway ( Sometimes on second try ), but this message was nagging. I tried installing AroundMe again and see whether this message appear when it is installed, it did appear again ... I did a full reset of my phone, still the message appears when I try to install any application from App Store... Any help will be much appreciated to get rid of this nagging message... Thank you

Hi EbSax,
Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
~Deepak

Similar Messages

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Using Site Content and Structure unable to move documents,pages and getting weird error message

Hi ,
earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
Now,we are getting a un-readable format error.
After selecting the destination we are getting the error.
and the file can't move.
What might me be the error.
Expecting answers related to my question.
1.As we can do using Internet Explorer,
2. Using Send To also we can move.
Using this Site Content and structure we can maintain Versoining also.
If any one face the same issue then we can easily find out the solution.
Regards ,
Prathap
SP Developer
Specify the destination to move the items you selected.

Hi,
Using Site Content and Structure unable to move documents,pages and getting weird error message
We are getting Below error:
When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
1576|/wEWwwECuLLErw0Cy+nFYwK84baBAgK6zNqsAgLs0Le0BQK1s8uaCAL5qrm3CAKk7K6pDwKo9a0GArm+xr4NApKe9KUKAoajpK4CAqqU/2sChJXBtAIC052rYQKS+LTPAgLe+7uQAwLO0re/BwLgoaw2AojAlIMOApSO4JoNAuvW7MoKAojz2P4OAuOMt9EGAv/ns1wC64qI7gEC0LymmAcCro3lnQkCj7viwAsC8Met9QEC3a/DHALg4ZO6AQKAn8ebCALvr72DAwKm/NGmAgKN4aayCQLmmczsCgL+46qSAQKH7paCDgLouOHjDwKGuNCBCQKwuob2CQKP78n3BwLQ7vSYCALxlcvIBALRuajXAwK6/vr4AwKx8YasCQLti5igAQKay7JZAta625IFAuTy6rUKAvnC7eQKApvB3ugPAoTBua8BAoyajvgMAsGdloEJAvH+2KECAua7k9AGAv3Lzd8HAtPD3ocOAuX7hM4GAqO1g9sIAtn65sgFAuDkr9QEAt7I1KkMAryhltsIAtizx/kBAvzS7IcBAr+YhK4PAsO3rtADAvea+sADAsvc4IgKAp/1vIoMApelp3ICl+PqiwwC/KX1gwUC3fv58gIC7ZG/pwIC4cnupQgCq7mdlgYCjciR+AwC8/ue4gkC4YWJywUCs+rviAECpuyJigECkfr5rgkC08rHoQ0C+erayQUCjMqStQkCpIuKtwEC+dG5ngICoZ3/og0CspXoxwwC+pzgmwwCkoD5mAYCn/qH2AcC/N/pvAcCv5OtwAICuZquqgcC0/OFnwkC2/2wzQMCrJrO9woC69G52ggC64nunggCtLOIsQEC9LyC7gUC0ry/zgIC1ZDvgQ0C98OfMgL4kaj3CQKXhebCCwKi3bjPBQKYuojTCAKc4+fxCAKyjLfoBALVxO8SAsXSyuQLAqyvkNIPApDV5PgDAtufwJwEAu2BsoYLAs3Oqd8PAo6i+YMDAsy706oCAsLjx7kLApu3+9gKAuLnvMoIAtWywo8OAv6MjvIHAtSDhJwNArXRmL0LAraZvUcC5cGygQoCz5HN7A0C+YzY9AMCmtWQ6AUC/oHF8w4CxeTgmg8CgszujQECss22vgYCp6HBuggCkfm+FAKngqb5BgKkuIzAAQKPspKCCQLu+eDvCwKf5YrEBQKl0M3ACgKm85DvDALCu/nfCwLbwO38DgLoz5eyDQLfr9XLCwL20/eUDgL7hpr3DAKh1tfbCgL48OuNBwK4tuKaCALpgbn5CgLC4dKvBgKKlu76CwKfhKLJAQLurPTIAwLG0o+hAgKI5Y6dDALq+OOlCQKxjuuICAK8yrLHBwLcrOSSAwLoiJfQCwKKyvrtBALXkbCBCgKt4bG9BQLr6qnxCwLC2pz2DQKQ7OuZBALt7t+DDAKR47b8CAKi6pPGCQKLl4r3CQK5yfj+AwLgzYvjDwKUjerODQK7mOPTCQL9qP3qBgKYiOL9AgLA8pSaBwKay8fBDQLqw93DCgKkjpf/CwLsyquQCwKtpbGsDALMtKmxBwKPpvCmBOAFHtmBuG3iNmIT9fQ8Z1TWMpjZ122|cccccccccnncnnnnn|

Weird error message using phone as iPod

When I plug my iPhone into my car's iPod connection cord (which works fine with regular iPods and does not cause regular iPods to display any weird error messages), the iPhone says something about how "...that accessory does not work with the iPhone..." and asks me whether I want to switch to airplane mode. In spite of this weird message, I am able to play my music via the usual method in my car. Weird. Remedy?

Actually Human,
Many iPod accesories were not designed to operate in close proximity to a GSM phone. The iPhone is a GSM phone. There is a program for iPod accessory manufacturers to test and certify their accesories for use with the iPhone. This article contains more information:
http://docs.info.apple.com/article.html?artnum=305766
That being said, many will work without going into airplane mode, some will get interference from the GSM signal that will come through as a hum or sometimes popping noise. Since sending and receiving the GSM signal is needed to make calls, the iPhone can't be shielded to prevent interfering, the accessory needs to be.
This article contains more information on potential interference:
http://docs.info.apple.com/article.html?artnum=305662
The short answer is the car adapter may work without going into Airplane Mode, or it may have interference from the GSM signal at times.
Hope this helps,
Nathan C.

Weird error message on Adobe Reader XI installation.

I've just downloaded Adobe Reader XI and started to instal it but get this weird error message: "The ordinal 459 could not be located in the dynamic link library urlmon.dll". What does this mean and what can I do about it?

Hi EbSax,
Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
~Deepak

Help Weird Error Messages Connecting Externals on USB

Hi,
For some reason very recently everytime I plug in a peripheral into the usb port I get a weird error message and the units (like an external HD, external DVD burner, etc.) won't work. The errors are something like:
The system extensions/system/library/extensions/systems/kext plugins/libkern.kext was installed improperly and can not be used. Please reinstall ir or contact the products vendor for an update.
Ohter error with the have the same message but file components change like:
iousbfamily.kext
bsdkernel.kext
mach.kext
udf.kext
system.kext
unsupported.kext
Anybody have a clue? Thanks

Yes, you should absolutely report it as a bug.
But this is a problem in error reporting, not in valid code compilation, because the code
cannot compile -- so don't expect to impart much momentum on a fix without additional community support.
There's very clearly a coding problem that the static function f cannot access the non-static member
g.
To estimate the risk of more serious problems with the compiler, I investigated the two closest scenarios for making the code legal. If you either:
make g a static member (and give it storage), or
make f a non-static function (and call it with an instance of A)
...then the code is valid and the compiler doesn't ICE in either case.
So the severity of this problem is very low because, as you said, this ICE seems to occur only when there is an error in the code.

Keep getting a weird error message in AE CS4

I keep getting this error message concerning a few of the files in my Project bin:
I get this message multiple times when I open this particular project and repeatedly click "OK" until the project finishes opening up. The result is missing files. When I go to replace the file with the proper file which it already should be anyways it pops up this error message on me again. What does this mean and why are my files not able to be in AE? Sometimes they are and sometimes not.
I can drag the same file into the project bin and it will work fine (but I have to go through the trouble of putting it back in the correct spot in the layer stacking order in my compositions that use this particular file).

Hi, still having this problem. What's weird is it's intermittent. I'll go to open the project one day from the same drive hooked up the same way and it will work and then the next day, without even having imported anything into the project the previous day, it will give me the error and I'm screwed because there's so many files that are "missing". I tried renaming a long file name with only 10 characters in the finder and then replacing the file in AE and when I hit OK it gave me the same exact error message.

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Weird error message when loading songs to Shuffle

Hello,
I'm getting a little bit p.o.'d with the Shuffle I bought for my husband for Christmas.
Here is what's happening and what all I've done since last night...
Happening: I get the Shuffle to show up in the iTunes source list and can load it with 5 songs and then each time I try and drag another song onto it, I get the following error message:
"The iPod "MyPod" cannot be updated. The required disc cannot be found."
When I select the Shuffle from the source list, the songs I tried to load and received this message with show up with a grey circle/dot next to the number that the particular song would be in the Shuffle's list.
At first I thought maybe it was happening because a long time ago I had another computer and burned a disc of all the songs I purchased from the iTunes Music Store and then dragged into iTunes library on my new computer. So then I bought a new song last night and the same thing happened, same error message.
Here's what I've done so far:
I have removed/reinstalled iTunes 6 and the iPod updater. A couple times last night when trying to restore the Shuffle to factory settings, it didn't show up in the updater. I've trashed the plist files, repaired permissions, removed the iPodDriver.kext file, as told to do so in an Apple article.
I'm getting a wee bit frustrated and am hoping to get some help from all of your people here on the discussions!
I also noticed that none of these problems happen with my iPod Mini, just the Shuffle. Since I just got it yesterday, I will phone Apple support this morning when they open and will post back anything I learn, but I'm hoping someone here can help me (us) out before having to deal with Apple---I'm about to pull out my hair here and that's just not a good look for the Holidays, you know?!
Happy Holidays everyone!
Mary

Hi srb,
Actually my iPod Mini is called Mary's iPod and the Shuffle is called MyPod. They both show up in iTunes now and I found a "workaround" to get the songs on the shuffle, making a playlist and having the shuffle autoload from that list.
Thanks for the feedback and happy holidays!
Mary

Have weird error message, help please.

I've created two classes to interact with each other from a problem in my text book. Here is the problem from the book:
Implement a class Employee. An employee has a name(a string) and a salary (a double). Write a default constructor, a constructor with two parameters(name and a salary), and methods to return the name and salary. Write a small program that test your class.
I'm think the error is probably small, but I'm having trouble identifying it.
Here is the code and error messages
This class contains a constructor designed to construct an employee object with
the parameters name & salary.
public class Employee
   String name;
   double salary;
      This constructor, when called, constructs an object Employee,
      sets the initial name and salary.
   public Employee(String constructName, double constructSalary)
   name = constructName;
   salary = constructSalary;
   The method returns the value for name to the EmployeeTester class.
   public String employeeName()
      return name;
   This method returns the value for salary to the EmployeeTester class.
   public double employeeSalary()
      return salary;
This class contains an executable program designed to test the functionality
of the class Employee.
public class EmployeeTester
   public static void main(String[] args)
         Employee rick = new Employee(rick,10000);
         System.out.println("The employee name is " + rick.employeeName + ".");
         System.out.println("The employee salary is " +rick.employeeSalary + ".");
}C:\Documents and Settings\Administrator\Desktop\Comp 1900 files\EmployeeTester.java:9: cannot find symbol
symbol : constructor Employee(Employee,int)
location: class Employee
Employee rick = new Employee(rick,10000);
^
C:\Documents and Settings\Administrator\Desktop\Comp 1900 files\EmployeeTester.java:10: cannot find symbol
symbol : variable employeeName
location: class Employee
System.out.println("The employee name is " + rick.employeeName + ".");
^
C:\Documents and Settings\Administrator\Desktop\Comp 1900 files\EmployeeTester.java:11: cannot find symbol
symbol : variable employeeSalary
location: class Employee
System.out.println("The employee salary is " rick.employeeSalary ".");
^
3 errors

C:\Documents and Settings\Administrator\Desktop\Comp
1900 files\EmployeeTester.java:9: cannot find symbol
symbol : constructor Employee(Employee,int)
location: class Employee
Employee rick = new Employee(rick,10000);The error message is telling you exactly what's going yon. You're trying to create a new Employee by passing an Employee and an int to the constructor. Employee does not have a c'tor that takes Employee and int as arguments. So either create such a c'tor, or call one that does exist. (Without looking at your code or what you're trying to do, I'll say that the latter is more likely the correct course.)
Also, you've got a flaw there, in that at the point you say Employee rick, rick does not have a value, but then in the same line, you try to pass rick's value to the c'tor, but rick doesn't have a value yet. You're saying, "here's this new variable rick, give it a value based on it's current, nonexistent value."
^
Settings\Administrator\Desktop\Comp 1900
files\EmployeeTester.java:10: cannot find symbol
ymbol : variable employeeName
location: class Employee
System.out.println("The employee name is " +
rick.employeeName + ".");Again, the error message is very explicit. You're trying to use a member variable called employeeName where Employee has no such member variable.
>
>
C:\Documents and Settings\Administrator\Desktop\Comp
1900 files\EmployeeTester.java:11: cannot find
symbol
symbol : variable employeeSalary
location: class Employee
System.out.println("The employee salary is "
rick.employeeSalary ".");Based on the above, you should be able to figure this one out.

When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.

This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformat

Hey donovanjj,
Thanks for the question. Let’s try to recreate your SC Info folder:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
If the above does not resolve your issue, you may want to look over the following resources:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thanks,
Matt M.

Weird Error Message when Trying to Install iTunes 10

I had to uninstall iTunes recently because it was getting an error message when I tried to open it and that message suggested I remove and reinstall it. Now when I try to install iTunes 10 (I had a lower version before, iTunes 9.something), I get this message:
An error occured during the installation of assmebly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="x76"'. Please refer to Help and Support for more information. HRESULT: 0x8007054F
I absolutely hate messages like these, you can't do anything with them and it makes you feel like the problem is unfixable. Hopefully that's not the case because until this is fixed I have no iTunes or Quicktime.

Through my own cunning and genius, I have found the way for someone else to guide me step-by-step exactly what to do.
For anybody else having this problem, GO HERE: http://support.microsoft.com/default.aspx?scid=kb;en-us;946414
The solution is that "Regedit" thing where you delete certain parts of your registry and then restart your computer. Just do like it says there and you'll be good to go. Finally, this nightmare of epic proportions is over, and I can get back to playing airsoft.

Weird error message when trying to use migration assistant?

We gave my mom a Macbook Pro for Mother's Day. While trying to set it up for her using migration assistant pc to mac, her Dell kept coming up with an error message saying msidcrl40.dll is missing?? What the heck does that even mean? Needless to say migration assistant would not run on her computer. We're going to take it to the Apple store tomorrow but does anyone have a suggestion on how we can fix it ourselves so we don't have to head to the store? Can they even help us at the Apple store? I also wanted to them to help us with transfering her Quicken data from her Dell to iBank because I'm scared I'll mess it up.

You can't do that. Instead, just remove "aaa new-model" from the config then try to deploy it. Alternatively, you can try "merge mode," but that will send the whole config back to the device.

Weird Error Message - Transaction Terminated....

Hi
I am running one job at the background and it has failed twice since morning giving this error message in system job log....I cant make out anything out of this any clues???
07:51:16 prd0ap02_P01_79      BTC 4 100 ZB_JB             F6F TemSe object JOBLGX06594301X77660 was closed remotely
07:51:16 prd0ap02_P01_79      BTC 4 100 ZB_JB             F61 TemSe input/output to unopened file
07:51:16 prd0ap02_P01_79      BTC 4 100 ZB_JB             F61 TemSe input/output to unopened file
07:51:16 prd0ap02_P01_79      BTC 4 100 ZB_JB             F71 Error in TemSe Management
07:51:16 prd0ap02_P01_79      BTC 4 100 ZB_JB             R47 Delete session 001 after error 023
09:10:34 prd0ap02_P01_79      BTC 2 100 ZB_JB             F62 Positioning error in a file for a TemSe object
09:10:34 prd0ap02_P01_79      BTC 2 100 ZB_JB             F62 Positioning error in a file for a TemSe object
09:10:34 prd0ap02_P01_79      BTC 2 100 ZB_JB             F62 Positioning error in a file for a TemSe object
09:10:34 prd0ap02_P01_79      BTC 2 100 ZB_JB             F71 Error in TemSe Management
09:10:34 prd0ap02_P01_79      BTC 2 100 ZB_JB             F3V Error 22 for write/read access to a file. File = /usr/sap/P01/SYS/global/100SP
                                                               OOL/00010000064625
09:10:34 prd0ap02_P01_79      BTC 2 100 ZB_JB             F64 Unable to close TemSe object file
09:10:37 prd0ap02_P01_79      BTC 2 100 ZB_JB             Q0E Signal 11 received by operating system
09:10:41 prd0ap02_P01_79      BTC 2 100 ZB_JB             Q02 Stop Workproc 2, PID 1510907
09:11:35 prd0ap02_P01_79      BTC 2                       Q01 Start Workproc 2, 2 times since system startup. PID 1528811
09:11:35 prd0ap02_P01_79      BTC 2 100 ZB_JB             F6F TemSe object JOBLGX08170801X47537 was closed remotely
09:11:35 prd0ap02_P01_79      BTC 2 100 ZB_JB             F61 TemSe input/output to unopened file
09:11:35 prd0ap02_P01_79      BTC 2 100 ZB_JB             F61 TemSe input/output to unopened file
09:11:35 prd0ap02_P01_79      BTC 2 100 ZB_JB             F71 Error in TemSe Management
09:11:35 prd0ap02_P01_79      BTC 2 100 ZB_JB             R47 Delete session 001 after error 023
Thanks
Sameer

It seems to be a problem with the spool. Please check that the expired spools on the system are cleared.
Sudha

Weird error message on compile

I get this error message when I try to compile a file:
ProviderMain.java:11: cannot resolve symbol
symbol : Class CyberlabInterface
location : package Cyberlab
import com.Cyberlab.CyberlabInterface;
__________________^
The class CyberlabInterface does exist.
Any Ideas?

Yes, that is how you include a .jar file in your classpath.
Whenever you receive that message, the problem is that the compiler can't find the class or method you are referring to. This means that either the class isn't in your classpath, or the class/method is misspelled/doesn't exist.

Weird Error Message (AroundMe...)

Similar Messages

Maybe you are looking for