Weird Error Message - Transaction Terminated....
Hi
I am running one job at the background and it has failed twice since morning giving this error message in system job log....I cant make out anything out of this any clues???
07:51:16 prd0ap02_P01_79 BTC 4 100 ZB_JB F6F TemSe object JOBLGX06594301X77660 was closed remotely
07:51:16 prd0ap02_P01_79 BTC 4 100 ZB_JB F61 TemSe input/output to unopened file
07:51:16 prd0ap02_P01_79 BTC 4 100 ZB_JB F61 TemSe input/output to unopened file
07:51:16 prd0ap02_P01_79 BTC 4 100 ZB_JB F71 Error in TemSe Management
07:51:16 prd0ap02_P01_79 BTC 4 100 ZB_JB R47 Delete session 001 after error 023
09:10:34 prd0ap02_P01_79 BTC 2 100 ZB_JB F62 Positioning error in a file for a TemSe object
09:10:34 prd0ap02_P01_79 BTC 2 100 ZB_JB F62 Positioning error in a file for a TemSe object
09:10:34 prd0ap02_P01_79 BTC 2 100 ZB_JB F62 Positioning error in a file for a TemSe object
09:10:34 prd0ap02_P01_79 BTC 2 100 ZB_JB F71 Error in TemSe Management
09:10:34 prd0ap02_P01_79 BTC 2 100 ZB_JB F3V Error 22 for write/read access to a file. File = /usr/sap/P01/SYS/global/100SP
OOL/00010000064625
09:10:34 prd0ap02_P01_79 BTC 2 100 ZB_JB F64 Unable to close TemSe object file
09:10:37 prd0ap02_P01_79 BTC 2 100 ZB_JB Q0E Signal 11 received by operating system
09:10:41 prd0ap02_P01_79 BTC 2 100 ZB_JB Q02 Stop Workproc 2, PID 1510907
09:11:35 prd0ap02_P01_79 BTC 2 Q01 Start Workproc 2, 2 times since system startup. PID 1528811
09:11:35 prd0ap02_P01_79 BTC 2 100 ZB_JB F6F TemSe object JOBLGX08170801X47537 was closed remotely
09:11:35 prd0ap02_P01_79 BTC 2 100 ZB_JB F61 TemSe input/output to unopened file
09:11:35 prd0ap02_P01_79 BTC 2 100 ZB_JB F61 TemSe input/output to unopened file
09:11:35 prd0ap02_P01_79 BTC 2 100 ZB_JB F71 Error in TemSe Management
09:11:35 prd0ap02_P01_79 BTC 2 100 ZB_JB R47 Delete session 001 after error 023
Thanks
Sameer
It seems to be a problem with the spool. Please check that the expired spools on the system are cleared.
Sudha
Similar Messages
-
I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Using Site Content and Structure unable to move documents,pages and getting weird error message
Hi ,
earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
Now,we are getting a un-readable format error.
After selecting the destination we are getting the error.
and the file can't move.
What might me be the error.
Expecting answers related to my question.
1.As we can do using Internet Explorer,
2. Using Send To also we can move.
Using this Site Content and structure we can maintain Versoining also.
If any one face the same issue then we can easily find out the solution.
Regards ,
Prathap
SP Developer
Specify the destination to move the items you selected.Hi,
Using Site Content and Structure unable to move documents,pages and getting weird error message
We are getting Below error:
When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
1576|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|cccccccccnncnnnnn| -
Weird error message using phone as iPod
When I plug my iPhone into my car's iPod connection cord (which works fine with regular iPods and does not cause regular iPods to display any weird error messages), the iPhone says something about how "...that accessory does not work with the iPhone..." and asks me whether I want to switch to airplane mode. In spite of this weird message, I am able to play my music via the usual method in my car. Weird. Remedy?
Actually Human,
Many iPod accesories were not designed to operate in close proximity to a GSM phone. The iPhone is a GSM phone. There is a program for iPod accessory manufacturers to test and certify their accesories for use with the iPhone. This article contains more information:
http://docs.info.apple.com/article.html?artnum=305766
That being said, many will work without going into airplane mode, some will get interference from the GSM signal that will come through as a hum or sometimes popping noise. Since sending and receiving the GSM signal is needed to make calls, the iPhone can't be shielded to prevent interfering, the accessory needs to be.
This article contains more information on potential interference:
http://docs.info.apple.com/article.html?artnum=305662
The short answer is the car adapter may work without going into Airplane Mode, or it may have interference from the GSM signal at times.
Hope this helps,
Nathan C. -
Weird error message on Adobe Reader XI installation.
I've just downloaded Adobe Reader XI and started to instal it but get this weird error message: "The ordinal 459 could not be located in the dynamic link library urlmon.dll". What does this mean and what can I do about it?
Hi EbSax,
Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
~Deepak -
Help Weird Error Messages Connecting Externals on USB
Hi,
For some reason very recently everytime I plug in a peripheral into the usb port I get a weird error message and the units (like an external HD, external DVD burner, etc.) won't work. The errors are something like:
The system extensions/system/library/extensions/systems/kext plugins/libkern.kext was installed improperly and can not be used. Please reinstall ir or contact the products vendor for an update.
Ohter error with the have the same message but file components change like:
iousbfamily.kext
bsdkernel.kext
mach.kext
udf.kext
system.kext
unsupported.kext
Anybody have a clue? ThanksYes, you should absolutely report it as a bug.
But this is a problem in error reporting, not in valid code compilation, because the code
cannot compile -- so don't expect to impart much momentum on a fix without additional community support.
There's very clearly a coding problem that the static function f cannot access the non-static member
g.
To estimate the risk of more serious problems with the compiler, I investigated the two closest scenarios for making the code legal. If you either:
make g a static member (and give it storage), or
make f a non-static function (and call it with an instance of A)
...then the code is valid and the compiler doesn't ICE in either case.
So the severity of this problem is very low because, as you said, this ICE seems to occur only when there is an error in the code. -
Can anyone help with apachectl error messages in Terminal?
Does anyone here understand apachectl error messages?
When I use the command:
apachectl configtest
Terminal gives me:
Warning: DocumentRoot [/usr/docs/dummy-host.example.com] does not exist Warning: DocumentRoot [/usr/docs/dummy-host2.example.com] does not exist Syntax error on line 117 of /private/etc/apache2/extra/httpd-ssl.conf: SSLCertificateFile: file '/private/etc/apache2/server.crt' does not exist or is empty
I am trying to install Baikal Server: http://baikal-server.com. ThanksSkakagrall wrote:
I've had another go. Now getting this error message after apachectl configtest
Warning: DocumentRoot [/usr/docs/dummy-host.example.com] does not exist Warning: DocumentRoot [/usr/docs/dummy-host2.example.com] does not exist [Tue Feb 18 14:53:58 2014] [warn] _default_ VirtualHost overlap on port 80, the first has precedence Syntax OK
Any ideas?
I looked thought the documens and his instuctions seem a bit over the top. So to help we can iver start from the begining or try to fix what you have. If you want to fix what you have I first need to know:
1) where did you put the baikal-regular folder after you downloaded it?
2) Can you cut and past "/etc/apache2/httpd.conf It is wrong.
My one is:
macbook-cat:apache2 steve$ cat httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/usr"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module libexec/apache2/mod_authn_file.so
LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
LoadModule authn_default_module libexec/apache2/mod_authn_default.so
LoadModule authz_host_module libexec/apache2/mod_authz_host.so
LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so
LoadModule authz_user_module libexec/apache2/mod_authz_user.so
LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
LoadModule authz_default_module libexec/apache2/mod_authz_default.so
LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
LoadModule cache_module libexec/apache2/mod_cache.so
LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so
LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so
LoadModule dbd_module libexec/apache2/mod_dbd.so
LoadModule dumpio_module libexec/apache2/mod_dumpio.so
LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so
LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
LoadModule include_module libexec/apache2/mod_include.so
LoadModule filter_module libexec/apache2/mod_filter.so
LoadModule substitute_module libexec/apache2/mod_substitute.so
LoadModule deflate_module libexec/apache2/mod_deflate.so
LoadModule log_config_module libexec/apache2/mod_log_config.so
LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
LoadModule logio_module libexec/apache2/mod_logio.so
LoadModule env_module libexec/apache2/mod_env.so
LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so
LoadModule expires_module libexec/apache2/mod_expires.so
LoadModule headers_module libexec/apache2/mod_headers.so
LoadModule ident_module libexec/apache2/mod_ident.so
LoadModule usertrack_module libexec/apache2/mod_usertrack.so
#LoadModule unique_id_module libexec/apache2/mod_unique_id.so
LoadModule setenvif_module libexec/apache2/mod_setenvif.so
LoadModule version_module libexec/apache2/mod_version.so
LoadModule proxy_module libexec/apache2/mod_proxy.so
LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
LoadModule ssl_module libexec/apache2/mod_ssl.so
LoadModule mime_module libexec/apache2/mod_mime.so
LoadModule dav_module libexec/apache2/mod_dav.so
LoadModule status_module libexec/apache2/mod_status.so
LoadModule autoindex_module libexec/apache2/mod_autoindex.so
LoadModule asis_module libexec/apache2/mod_asis.so
LoadModule info_module libexec/apache2/mod_info.so
LoadModule cgi_module libexec/apache2/mod_cgi.so
LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
LoadModule negotiation_module libexec/apache2/mod_negotiation.so
LoadModule dir_module libexec/apache2/mod_dir.so
LoadModule imagemap_module libexec/apache2/mod_imagemap.so
LoadModule actions_module libexec/apache2/mod_actions.so
LoadModule speling_module libexec/apache2/mod_speling.so
LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModule alias_module libexec/apache2/mod_alias.so
LoadModule rewrite_module libexec/apache2/mod_rewrite.so
#LoadModule perl_module libexec/apache2/mod_perl.so
LoadModule php5_module libexec/apache2/libphp5.so
LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User _www
Group _www
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/Library/WebServer/Documents"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Library/WebServer/Documents">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks MultiViews
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# Apple specific filesystem protection.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<DirectoryMatch ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</DirectoryMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/private/var/log/apache2/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/private/var/log/apache2/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/private/var/log/apache2/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /private/var/run/cgisock
</IfModule>
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/Library/WebServer/CGI-Executables">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /private/etc/apache2/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile /private/etc/apache2/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# 6894961
TraceEnable off
# Supplemental configuration
# The configuration files in the /private/etc/apache2/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include /private/etc/apache2/extra/httpd-mpm.conf
# Multi-language error messages
#Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include /private/etc/apache2/extra/httpd-autoindex.conf
# Language settings
Include /private/etc/apache2/extra/httpd-languages.conf
# User home directories
Include /private/etc/apache2/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include /private/etc/apache2/extra/httpd-info.conf
# Virtual hosts
#Include /private/etc/apache2/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
Include /private/etc/apache2/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include /private/etc/apache2/extra/httpd-dav.conf
# Various default settings
#Include /private/etc/apache2/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include /private/etc/apache2/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Include /private/etc/apache2/other/*.conf -
Hi everybody,
I have a relatively complex SQL Statement I am passing to SQL Server from C# application. This statement start from BEGIN TRANSACTION
insert
insert
insert
COMMIT TRANSACTION
I am getting this error
The parameterized query '(@sale_no decimal(8,0),@scanDate datetime,@start_date datetime,@' expects the parameter '@operator'
So, first of all, why does it show this strange part of the query and secondly, I do supply the @operator parameter (although it was assigned null value which is a mistake and I need to fix it).
Still, why I am getting this strange error?
Thanks in advance.
E.g. I have the following code:
/// <summary>
/// Adds salespoint and operator parameters to the SqlCommand
/// </summary>
/// <param name="sqlCommand"></param>
public void AddOperatorAndSalespointParameters(SqlCommand sqlCommand)
sqlCommand.Parameters.Add("@operator", SqlDbType.Char, 6).Value = this.CurrentOperator;
sqlCommand.Parameters.Add("@salespoint", SqlDbType.Char, 6).Value = this.CurrentSalespoint;
and at the moment of execution both variables were null.
UPDATE. After I fixed the NULL values, the error disappeared. Still, I find it misleading.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articlesInterestingly, I got a very similar error message today for this piece of code:
using (SqlCommand insertCommand = new SqlCommand())
insertCommand.CommandText = @"INSERT INTO dbo.MB_Redemptions
(date_time, quantity, BenefitID, GstPassPassNo, AccessPassNo, Trans_no)
values (@datetime, @quantity, @BenefitID, @gstPassNo, @accessPassNo, @transNo);";
insertCommand.Parameters.Add("@datetime", SqlDbType.DateTime).Value = dt;
insertCommand.Parameters.Add("@quantity", SqlDbType.Int).Value = quantity;
insertCommand.Parameters.Add("@BenefitId", SqlDbType.Int).Value = BenefitId;
insertCommand.Parameters.Add("@gstPassNo", SqlDbType.Decimal, 17).Value = (this.passTable == PassTable.Gst_Pass) ? passNo : (Int64?) null;
insertCommand.Parameters.Add("@accessPassNo", SqlDbType.Decimal, 17).Value = (this.passTable == PassTable.Access) ? passNo : (Int64?)null;
insertCommand.Parameters.Add("@transNo", SqlDbType.Decimal, 17).Value = transNo;
database.ExecuteSqlCommand(insertCommand, CommandExecutionType.NonQuery);
So, do I understand correctly that I should use DbNull.Value instead of the way I try to assign null value to a variable?
The error I am getting is:
The parameterized query '(@datetime datetime,@quantity int,@BenefitId int,@gstPassNo deci' expects the parameter '@accessPassNo', which was not supplied.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles -
Keep getting a weird error message in AE CS4
I keep getting this error message concerning a few of the files in my Project bin:
I get this message multiple times when I open this particular project and repeatedly click "OK" until the project finishes opening up. The result is missing files. When I go to replace the file with the proper file which it already should be anyways it pops up this error message on me again. What does this mean and why are my files not able to be in AE? Sometimes they are and sometimes not.
I can drag the same file into the project bin and it will work fine (but I have to go through the trouble of putting it back in the correct spot in the layer stacking order in my compositions that use this particular file).Hi, still having this problem. What's weird is it's intermittent. I'll go to open the project one day from the same drive hooked up the same way and it will work and then the next day, without even having imported anything into the project the previous day, it will give me the error and I'm screwed because there's so many files that are "missing". I tried renaming a long file name with only 10 characters in the finder and then replacing the file in AE and when I hit OK it gave me the same exact error message.
-
Error Message in Terminal: unknown variable 'datadir=/usr/local/mysql/data'
Hello,
I'm on a Mac Pro Quad Core Intel Xeon (64-bit) using OS 10.6.4. I have mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ and PHP Version 5.3.1.
I have also installed phpMyAdmin 3.3.1 and have set up the relations tables in a pmadb within mysql; created a new database with tables; and created some new users. I am able to access and use mysql via phpMyAdmin.
But now I am unable to login to mysql via the Terminal command:
mysql -u root -p
which now returns an error message of:
/usr/local/mysql/bin/mysql: unknown variable 'datadir=/usr/local/mysql/data'
my.cnf file reads:
[mysqld]
datadir=/usr/local/mysql/data
socket=/var/mysql/mysql.sock
#skip-grant-tables=1
[client]
datadir=/usr/local/mysql/data
socket=/var/lib/mysql/mysql.sock
and I can see the data directory in that location when using the Terminal.
My questions:
1. Is this related to anything I have done in setting up phpMyAdmin (tables, users)?
2. Is this a permissions problem with the directory named /usr/local/mysql/data?
Currently, the permissions and ownership are this:
drwxr-x--- 11 _mysql wheel 374 Jun 29 12:10 data
3. Is this a problem from upgrading to 10.6.4 recently?
4. Is this a my.cnf problem?
I would really like to be able to do things in the Terminal with mysql in addition to using phpMyAdmin.
Many thanks for any help on this.
Best,
ShelleyShelley Schreiber wrote:
Thanks for your suggestion, etresoft, but this was not helpful, I'm afraid. Removing datadir=/usr/local/mysql/data did not work. And prior to using phpMyAdmin, I was able to login via Terminal with this in place.
Try removing my.cnf. It isn't required and seems to be giving you problems.
Also, the mysql socket value is what comes with new Macs with Snow Leopard.
MySQL doesn't come on any new Mac except with Snow Leopard Server. I think we've had this conversation before and came to the conclusion that you don't have the server version, just a jacked up client.
I am noticing that the Terminal error message I get is saying:
/usr/local/mysql/bin/mysql: unknown variable . . .
whereas the data directory path is /usr/local/mysql/data
There is no data directory in /usr/local/mysql/bin/mysql
The program that is reporting the error is is /usr/local/mysql/bin/mysql.
My MySQL installation does not have a my.cnf file. It does have a number of example cnf files that I could use if I wanted to jack up my installation. None of them have a "datadir" value in them. If you don't want to get rid of my.cnf altogether, the just get rid of all of the datadir values inside it. -
Error message in Terminal upon startup?
Hi, I'm a new Mac user.
I was installing a few things on my new MacBook Pro (XCode, XQuartz, X11, and Homebrew) when I noticed some funky error message that I get whenever I open Terminal.
It says: -bash: export: `/usr/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/X11/bin': not a valid identifier.
I am still getting used to my Mac after a decade of Windows, and I have no clue what this error means or how to fix it. Could anyone enlighten me?Hi there,
Sorry for just jumping in on this convo but it seems more relevant to my issue and I don't think creating a new topic would be advised.
I have a similar issue. Whenever I open a new shell session / window I get the following output;
Last login: Fri Aug 8 14:24:02 on ttys000
Process name
Warren-MacBook:etc warren$ Process name
-bash: Process: command not found
Warren-MacBook:etc warren$
The line which says -bash: Process: command not found is whats bugging me.
I tried to editing the following files;
sudo vi /.bash_profile
sudo vi /Users/warren/.profile
None of them have any reference to a startup command which invokes a process.
I have mlocate installed and when I run;
locate .bash
I only get the above two files.
I have also looked at cron, and there are no jobs added so I'm really in the dark as to how to resolve this. If you are able to assist it would be much appreciated. -
IPod seen by windows, not by iTunes+ weird error message
I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10xI still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ... -
Weird error message when loading songs to Shuffle
Hello,
I'm getting a little bit p.o.'d with the Shuffle I bought for my husband for Christmas.
Here is what's happening and what all I've done since last night...
Happening: I get the Shuffle to show up in the iTunes source list and can load it with 5 songs and then each time I try and drag another song onto it, I get the following error message:
"The iPod "MyPod" cannot be updated. The required disc cannot be found."
When I select the Shuffle from the source list, the songs I tried to load and received this message with show up with a grey circle/dot next to the number that the particular song would be in the Shuffle's list.
At first I thought maybe it was happening because a long time ago I had another computer and burned a disc of all the songs I purchased from the iTunes Music Store and then dragged into iTunes library on my new computer. So then I bought a new song last night and the same thing happened, same error message.
Here's what I've done so far:
I have removed/reinstalled iTunes 6 and the iPod updater. A couple times last night when trying to restore the Shuffle to factory settings, it didn't show up in the updater. I've trashed the plist files, repaired permissions, removed the iPodDriver.kext file, as told to do so in an Apple article.
I'm getting a wee bit frustrated and am hoping to get some help from all of your people here on the discussions!
I also noticed that none of these problems happen with my iPod Mini, just the Shuffle. Since I just got it yesterday, I will phone Apple support this morning when they open and will post back anything I learn, but I'm hoping someone here can help me (us) out before having to deal with Apple---I'm about to pull out my hair here and that's just not a good look for the Holidays, you know?!
Happy Holidays everyone!
MaryHi srb,
Actually my iPod Mini is called Mary's iPod and the Shuffle is called MyPod. They both show up in iTunes now and I found a "workaround" to get the songs on the shuffle, making a playlist and having the shuffle autoload from that list.
Thanks for the feedback and happy holidays!
Mary -
Have weird error message, help please.
I've created two classes to interact with each other from a problem in my text book. Here is the problem from the book:
Implement a class Employee. An employee has a name(a string) and a salary (a double). Write a default constructor, a constructor with two parameters(name and a salary), and methods to return the name and salary. Write a small program that test your class.
I'm think the error is probably small, but I'm having trouble identifying it.
Here is the code and error messages
This class contains a constructor designed to construct an employee object with
the parameters name & salary.
public class Employee
String name;
double salary;
This constructor, when called, constructs an object Employee,
sets the initial name and salary.
public Employee(String constructName, double constructSalary)
name = constructName;
salary = constructSalary;
The method returns the value for name to the EmployeeTester class.
public String employeeName()
return name;
This method returns the value for salary to the EmployeeTester class.
public double employeeSalary()
return salary;
This class contains an executable program designed to test the functionality
of the class Employee.
public class EmployeeTester
public static void main(String[] args)
Employee rick = new Employee(rick,10000);
System.out.println("The employee name is " + rick.employeeName + ".");
System.out.println("The employee salary is " +rick.employeeSalary + ".");
}C:\Documents and Settings\Administrator\Desktop\Comp 1900 files\EmployeeTester.java:9: cannot find symbol
symbol : constructor Employee(Employee,int)
location: class Employee
Employee rick = new Employee(rick,10000);
^
C:\Documents and Settings\Administrator\Desktop\Comp 1900 files\EmployeeTester.java:10: cannot find symbol
symbol : variable employeeName
location: class Employee
System.out.println("The employee name is " + rick.employeeName + ".");
^
C:\Documents and Settings\Administrator\Desktop\Comp 1900 files\EmployeeTester.java:11: cannot find symbol
symbol : variable employeeSalary
location: class Employee
System.out.println("The employee salary is " rick.employeeSalary ".");
^
3 errorsC:\Documents and Settings\Administrator\Desktop\Comp
1900 files\EmployeeTester.java:9: cannot find symbol
symbol : constructor Employee(Employee,int)
location: class Employee
Employee rick = new Employee(rick,10000);The error message is telling you exactly what's going yon. You're trying to create a new Employee by passing an Employee and an int to the constructor. Employee does not have a c'tor that takes Employee and int as arguments. So either create such a c'tor, or call one that does exist. (Without looking at your code or what you're trying to do, I'll say that the latter is more likely the correct course.)
Also, you've got a flaw there, in that at the point you say Employee rick, rick does not have a value, but then in the same line, you try to pass rick's value to the c'tor, but rick doesn't have a value yet. You're saying, "here's this new variable rick, give it a value based on it's current, nonexistent value."
^
Settings\Administrator\Desktop\Comp 1900
files\EmployeeTester.java:10: cannot find symbol
ymbol : variable employeeName
location: class Employee
System.out.println("The employee name is " +
rick.employeeName + ".");Again, the error message is very explicit. You're trying to use a member variable called employeeName where Employee has no such member variable.
>
>
C:\Documents and Settings\Administrator\Desktop\Comp
1900 files\EmployeeTester.java:11: cannot find
symbol
symbol : variable employeeSalary
location: class Employee
System.out.println("The employee salary is "
rick.employeeSalary ".");Based on the above, you should be able to figure this one out. -
When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.
This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformatHey donovanjj,
Thanks for the question. Let’s try to recreate your SC Info folder:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
If the above does not resolve your issue, you may want to look over the following resources:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thanks,
Matt M.
Maybe you are looking for
-
Cannot get ipad2 to open documents in pages, iAnnotate or goodreader
I have previously been able to open documents in pages, iAnnotate and good reader. For the last week I have not been able to. Drop box also affected. When trying to open a document, the screen pauses and cycles, but nothing happens....please help.
-
I have attempted to connect both my digital camera and iPhone, and neither have worked. Unfortunately, I can't find my camera lead, but I do have my phone. This is the output of journalctl: May 14 20:11:34 anon kernel: usb 3-9: new high-speed USB dev
-
After 'upgrading' to iOS 7.0.2, I am unable to send or receive photos in iMessage. With the previous iOS, it was no problem. Is there a fix? Apple support is the usual 'black hole' that ***** up endless time.
-
Can I use Embed.ly with a custom app in Business Catalyst?
I'd like users to be able to share rich links on my site with Embed.ly. Is this possible? My preferred way would be to add a links field into the forum module, but I think for customization you have to use a custom web app. Anybody have experience wi
-
Adware found on my mac that I can't erase
I am running OS X yosemite I have antivirus for mac that found several adware on my mac and can't delete them how can I clean them off my mac