Weird error messages while starting up Illustrator

Not a critical issue, but disconcerting. I noticed sometime in the last few days that when I started up Illustrator, I got 3 Illustrator error messages (two of which were identical):
-An error occurred while processing the appearance of an object.
-The operation cannot complete because of an unknown error. [CANF]
Some details: I have restarted my computer. I have not tried to start Illustrator by double-clicking on a file or dragging a file onto the Illustrator icon. The application resides on my hard drive, not on a remote server or attached drive. I am running OS 10.5.4 on a Dual G5 PowerPC (3.0) tower with 2 GB SDRAM. The hard drive has 130 GB available. I have CS3 Standard installed. I have installed the latest patches from Adobe and Apple. I have not added any new fonts to my system recently. I am using Font Book, not any 3rd party font managers. Illustrator has not crashed recently. My coworkers have not reported these error messages (yet), but I don't think they've had to restart anything.

Illustrator doesn't quit. The 3 error messages happen after all the extensions & etc. are done loading, so after I click the "OK" buttons, Illustrator just waits for me to start working. Then Illustrator works normally. No files have gone corrupt, and no crashes. And no more error messages until I restart Illustrator.

Similar Messages

Error message while starting Console

Dear All,
I am getting given below error message while starting Console.
Start Failed :2
Invalid Credentials.
tell me the solution

Hi Pavan,
Check if you're connected with <SID>adm on OS as said Pinkle and if that user belongs to administrators group.
If yes you can check if the SAP<SID><Instance_number> and SAPOSCOL are started (and in automaticaly start mode).
Regards,

Error message while starting database

Hi all,
I am getting the following error message while starting the database . I just modified the DB_CACHE_SIZE parameter from 781MB to 781(+500MB) .We are using Oracle 9.2.0.1 in Windows server 2003 . The database starts fine with old parameter value.I searched in Metalink and in Google but no exact solution for this error . Can any body of you help me in this regard.. It is urgent....
C:\Documents and Settings\mishelpdesk.MISSERVER>d:
D:\>set oracle_sid=MISAPP1
D:\>sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Thu Jun 15 06:32:31 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect sys as sysdba
Enter password:
Connected to an idle instance.
SQL> startup pfile='D:\oracle\admin\MISAPP1\pfile\init.ora';
ORA-27102: out of memory
OSD-00022: Message 22 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 8) Not enough storage is available to process this command.
Thanks in Advance...
Govind.

Your problem is an OS, not Oracle problem, so it wouldn't help to play around with different init.ora parameters, as long as the basic problem persists. The note addresses W2K, you are on W2003, that may the reason for the different OSD error numbers.
For more information about AWE see on metalink
Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
Note:225349.1
Werner

Error message when starting Adobe Illustrator CC [Error loading plugins AppBarControls.aip]

Hello,
I get the following error message when I start Adobe Illustrator CC.
Error loading plugins
AppBarControls.aip
Then it gives me the option to continue by clicking okay. When it opens, the Application Bar is just blank.
I've tried uninstalling, then ran Adobe CC Cleaner, then downloaded and reinstalled.
Computer details : OS X 10.9.5, 1.3 GHz Intel Core i5, 8 GB 1600 MHz DDR3
Help is kindly appreciated!

I also have had a difficult time with Adobe Illustrator CC 2014 crashing upon launch. The support staff was great even though we had to work through several sessions. Below is the email explaining our final session.
This email is in regards with the issue you had been facing with Illustrator CC 2014.
While going through the installer logs, we found that there was an issue with the installation & the program installer had been denied access to several critical files & folders during installation.
This was the main reason for Illustrator crash as several critical components had not been installed properly.
We tried installing the program in a new user account & that worked.
Though the program has been installed properly now & is working in your old account, I will still strongly recommend you to get your computer user account repaired with a Windows 7 operating system diskette.
This is required so that you do not run into more trouble later while working with the Adobe Applications or even while installing other programs.
Avanish Divya was the final support person that successfully resolved my problems.

Error message while starting IPM managed server and WebCenter Portal Spaces

Hi,
1. I am getting an error message when i try to start IPM_server1 in Oracle ECM. The message is as follows in the Command Prompt :
<Mar 6, 2013 5:05:50 PM AST> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracl
e\MiddlewareNew6Release1\oracle_common\atgpf\modules\oracle.applcore.model_11.1.1\oracle.applcore.model.stub.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
2. When after some time the imaging server starts and i try to login it does not accept the username and password provided for EM. and login is unsuccessfull always.
Regarding my other issue is with Webcenter portal spaces :
1. I have installed WC_Spaces under the same UCM_domain where all other Managed servers are there.
2. When i try to login it always takes me to a screen which says : Internal error (stating some numbers regarding date & time). Please contact your administrator.
Need to fix these 2 issues very soon. Help will be greatly appreciated.
Thanks.

Hi Satendra,
Is upgradation the only solution?No, it is one of the better options (and my personal suggestion) as PS2 release is more stable and has many more functionalities and features than PS1. The error which you are getting may be due to a corrupt installation. In case you want to solve this error only and do not want to go for upgrade, then feel free to raise a case with support.
Regards,
Anuj

Error message while starting J2EE Server!

Hi!
I get this error message when i try to start J2EE server:
c:\j2ee -verbose
Exception in thread "main" java.lang.NoSuchMethodError
at com.sun.corba.ee.internal.corba.AnyImpl.createTypeCodeForClass(AnyImp
l.java:1256)
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.createTypeCode(Sh
utdownUtilDelegate.java:223)
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.writeAny(Shutdown
UtilDelegate.java:178)
at javax.rmi.CORBA.Util.writeAny(Util.java:80)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.re
bind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:188
at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:202
at javax.naming.InitialContext.rebind(InitialContext.java:370)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
erImpl.java:192)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
erImpl.java:149)
at com.sun.enterprise.server.J2EEServer.bindObject(J2EEServer.java:718)
at com.sun.enterprise.server.J2EEServer.createServerObject(J2EEServer.ja
va:473)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:244)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
Can someone tell me why?
Thanks

You need jsdk 1.3.1_03 or above to run j2ee 1.3.1 Any other version will give you this error.

Startup error message while starting up Windows after installing NI Circuit Design Suite 10

Hi.
I recentely acquired NI Circuit Design Suite Student Edition v10.
After installing it on my computer I began receiving the following error message everytime I booted up Windows.
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the Windows logs and found other error messages when the system booted:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date:  12-01-2008
Time:  13:17:54
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1004
Date:  12-01-2008
Time:  13:18:51
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1001
Date:  12-01-2008
Time:  13:21:33
User:  N/A
Computer: THINKPADT30
Description:
Fault bucket 619997672.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20   Bucket:
0008: 36 31 39 39 39 37 36 37   61999767
0010: 32 0d 0a                  2..
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7034
Date:  12-01-2008
Time:  13:18:12
User:  N/A
Computer: THINKPADT30
Description:
The National Instruments Domain Service service terminated unexpectedly. It has done this 1 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the forums at NI and found a similar problem with a computer with Windows Vista installed. I have Windows XP Professional installed on the computer, but tried the update through the self updating feature of the NI software.
After the update the problem remains exactly the same.
To find out more about the error, I checked several Windows properties to identify the cause of the problem. One thing I found was on the Services control, under Administrative Tools. After the error message during boot, the services window shows up 2 services whose status is "Stopping" and the startup type is "Automatic". This services are:
Lookout Citadel Driver
National Instruments Time Sincronization
I'm using an IBM ThinkPad T30 (Type 2366-BG1) with Windows XP Professional with 768Mb of memory, 80GB HDD.
Can anyone give me some hints on this matter?
Thank you in advance.

Good morning.
I tried the steps suggested but the problem remained. I then decided to try some aditional steps and apparently the problem is solved. I describe the steps I took bellow.
The problem was related to my antivirus / firewall solution, Panda Antivirus + Antispyware 2007.
1. I changed the previously mentioned Windows services startup to "Manual" instead of "Automatic".
2. Rebooted the computer.
3. Opened the services control in Administrative Tools.
4. Selected the first service "Citadel..." and pressed the "Start" button.
5. After a few seconds, the firewall solution presented a window stating that the program was attempting to access the internet (or my LAN). I selected "Always allow".
6. I repeated this step for all the others NI services. Some produced the same feedback, others didn't.
7. Changed the startup type of the services to the values I had written down before.
8. Rebooted the computer and everything worked fine.
It seems my firewall solution is unable to cope with a program trying to access the Internet (or network) before a user logs in.
Thank you for your support.
Best regards,
Alexandre Ventura
Message Edited by AlexandreV on 01-25-2008 04:56 AM

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Bypass the error messages while opening the Web Analysis 9.3.1 Report

I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
Thanks

Karen,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this I

While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
Derk

It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)

Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.

Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John.

Error message while executing international payroll with schema x000

Dear Team,
I am getting the below error message while running international payroll with schema x000.
   "Jump from DAYPR to detailed log
   Incorrect generation of wage types"
Request forum members to help me on the same.
Thank you,
Srinivas

Hi,
Thank you for the reply please find below i reviewed all the below tables please gothrough and advice me if any i missed out.
1)     T555E-Message Descriptions----
2) T551C-Period work schedule evaluation---
Grpg        Period ws     Description     Start Date      End Date      Cntg Class
   01     PWTC         Period WS     01.01.1990      31.12.9999     1
3) V_551C_B-Valuation class for Periodic work schedule
Grpg Period ws Description     start Date       End Date       Val.Classfor PWS
01      PWTC      Period WS       01.01.1990    31.12.9999       1
4) V_t508A-Work schedule rule
ESG    ES grpg for ws     Holiday      Text      PSG   WSrule    St Date          End Date
2        Salaried Employee   TCD             TC         01     TCWR    01.01.1900   31.12.9999
5) V_001P_H-Personnel Subarea grouping for Time Recording
Personnel area Personnel Area Text Personnel Subarea Pers.Subarea Ps Group
1100                 JEDDAH            1110              MAIN OFFICE           01
6) V_T555Z- Time type Determination
Can you advice me on this what I need to maintain here
7) V_T510S-Time wage type selection rule
Tm.WT Dy Grpg          No                                                   Wagetype Wage Type Long Text
54       01               001                                              1010            Basic Pay
Regards,
Srinivas

Error message while while upgrading FIM RTM to FIM Service pack 1

Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban Singha

HI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine

Weird error message on Adobe Reader XI installation.

I've just downloaded Adobe Reader XI and started to instal it but get this weird error message: "The ordinal 459 could not be located in the dynamic link library urlmon.dll". What does this mean and what can I do about it?

Hi EbSax,
Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
~Deepak

Why am I receiving an error message while trying to change my phone number?

So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later." I was hoping to circumvent the 15$ fee of doing it over the phone. Finally, I decided to do an online chat, the associate did not know why the error was occurring but informed me in order to change my number over chat, i would STILL have to pay the 15$ fee. Something struck me as so wrong there, so conveniently the change features and phone number part of the website was not working, however the view/pay your bill part was always working properly, never received any error messages there. I understood it was not the associates fault however. Still that is wrong. If it was not urgent I would wait. Yes I could have tried the number block, that section was not working either, but having to renew which numbers you want blocked every couple of months makes no sense to me, if I want something blocked, i want it blocked permanently not just for 90 days. Yes I tried call/SMS blocker apps from the app store but they're faulty in that they still give you notifications of when the blocked person/number called/text or do not always block everything all the time. But when it came down to it, even the associate encountered the error message while trying to change my number. So why is this happening. Verizon is expensive but the reception is better however theirs always issues when I need to fix something. Its frustrating

Verizon was having a problem on their end, perhaps a server down for some repair or updating. However you were already aware that there was an on-going problem in your own posting and you decided to continue on.I can understand you wanting this done and trying to save the $15.00 fee. However I would have waited a bit longer until the Verizon issue had been corrected. Yes it is frustrating but again you know in advance of a problem , I can understand that this is most upsetting for you but never try to perform any change when a problem is there and I also do not like to do business on a weekend with no live tech support available. I'm sure this will all work out for you if given some time. Sorry.
So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."

Weird error messages while starting up Illustrator

Similar Messages

Maybe you are looking for