Weird error preventing QT uninstall (Error 2330.23)

My problem involves the unsuccessful installation of iTunes 7 caused by problems removing QuickTime 7.1.3, but it's different from everyone else's registry problems. I've tried the iTunes 7 install, the QuickTime stand alone install, and the manual uninstallation of QuickTime via the Add/Remove Programs option under Control Panel. Each time I receive an error, (Error 2330.23), involving the following directory
Internal Error 2330.23 C:\ProgramFiles\Quicktime\QTSystem\QuickTimeStreaming.Resources\da.lproj
This occurs when trying to uninstall this file:
C:\...\QuickTimeStreaming.Resources\da.lproj\QuickTimeStreamingLocalized.dll.
I've tried accessing that file folder via My Computer, and when I do, it prompts me to format the C:\ drive (?!?!?!?!). I tried to delete the file by right-clicking the file folder and selecting 'Delete' in order to send it to the Recycle Bin, but it won't delete it, citing a data error, a "cyclic redundancy check." I have no idea what that means.
This problem is preventing me from uninstalling QT, which by the way seems to work fine. I've already uninstalled iTunes, and I haven't tried reinstalling an older version to see if it works.
Any ideas on how to resolve this problem?
HP desktop Windows XP

Yes - as it says in the first post: Macs don't have any issues [running my program] - except a recent user who has been getting the above error.
I have not been able to identify the reason that this individual cannot run the program, and so stand to learn something from helping them resolve the issue, unfortunately I've exhausted my own knowledge and immediate resources, which is why I'm asking for help here.
Thank you for your continued attention the thread.
Best,
Rax

Similar Messages

Hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been not help.

hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.

- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

WSUS service failure and uninstall error 0x80070643

Hello
I recently had a drive fail in a RAID 1 array on a Windows Server 2008 Standard SP2 domain controller. The drive was replaced and the array successfully rebuilt the drive. Our domain comprises a Win2k8 DC (which WSUS is installed on), a W2k3 DC, a W2k8 Storage
Server and various W2k, Win XP, Vista and W7 clients.
WSUS3 SP2 is installed on this computer and had been working fine. After the drive was rebuilt WSUS stopped working. WSUS is organised as follows:
The drive is divided into 3 partitions. C: contains the program files, D: contains the WSUS database and update files. E: is a system recovery partition.
After the drive was rebuilt I had a problem connecting to the WSUS console. I am logged on using the domain administrator account. I restarted the server last night in the hope that it would solve this issue. After restarting, the problem persists. When
I start Windows Server Update Services from Administrative Tools the centre pane shows a large red X and 'Error: Connection Error'. The option to 'Reset Server Node' results in the same error. The error, available from 'Copy Error to Clipboard' is:
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.IO.IOException -- The handshake failed due to an unexpected packet format.
Source
System
Stack Trace:
   at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Net.TlsStream.CallProcessAuthentication(Object state)
   at System.Threading.ExecutionContext.runTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.ConnectStream.WriteHeaders(Boolean async)
** this exception was nested inside of the following exception **
System.Net.WebException -- The underlying connection was closed: An unexpected error occurred on a send.
Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.GetUpdateServer(PersistedServerSettings settings)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServer()
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServerAndPopulateNode(Boolean connectingServerToConsole)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.OnExpandFromLoad(SyncStatus status)
The event logs show that the Update Services service started 7mins after the server was restarted. This is immediately followed by an event stating the Windows Update service had started. If fails soon after and is restared automatically twice to try to
recover from the failure. 12 hours after the restart the Update Services service is still not running. It is set to Automatic (Delayed Start). The service is set to logon as 'Network Service'. The service can be manually started, but 'Resert Server Node' again
results in the same error. After 4mins the service will stop. Event 7034 is logged:
Log Name:      System
Source:        Service Control Manager
Date:          31/08/2011 09:05:50
Event ID:      7034
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Phobos.htlincs.local
Description:
The Update Services service terminated unexpectedly. It has done this 4 time(s).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Service Control Manager" Guid="{555908D1-A6D7-4695-8E1E-26931D2012F4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7034</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-08-31T08:05:50.000Z" />
    <EventRecordID>230471</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>Phobos.htlincs.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Update Services</Data>
    <Data Name="param2">4</Data>
</EventData>
</Event>
IIS and SQL are running fine as far as I am aware. I also have Sophos Enterprise Console installed which uses SQL to store it's data and that is working fine.
After a bit of searching around the 'net I thought the easiest solution would be to uninstall WSUS, leave the database and update files in place and then re-install. I ran the uninstallation procedure from the Server Manager, but because the service is not
running, and even after starting the service, uninstallation fails:
Windows Server Update Services: Removal failed
   Error: Attempt to un-install Windows Server Update Services failed with error code 0x80070643. Fatal error during installation
I saw a reference to the online article located here:
http://blogs.technet.com/b/sus/archive/2008/11/05/how-to-manually-remove-all-of-wsus.aspx but the article states it is out of date and I did not want to make a bad situation worse by following the instructions.
Can anyone help me with this, please. Ideally, I would like to be able to keep the updates as downloading them again will consume a substantial amount of our monthly allowance. However, if the best thing is to remove the entire installation, then I will
ahppily go with that, too.
Thanks.

I'm experiencing this issue, but haven't been able to resolve it with the steps in Lawrence's post (and, another thanks from me for another detailed post from Lawrence!)
It's a 2008 box which had a relatively new WSUS install that just stopped working - not sure why. Unable to figure out why it had stopped, I tried to Remove the WSUS role, but that failed with the error above.
During the manual uninstall steps above...
(1) Using Windows Installer Cleanup Utility only showed the Windows Internal Database, not WSUS. I removed
that.
(2) Removed %ProgramFiles%\Update
Services - other resources not present
Reinstall has now failed with this error:
Windows Server Update Services 3.0 SP2 could not install Windows Internal Database. For more information, see the Setup log "C:\Users\NAME~1.ADM\AppData\Local\Temp\WSUSSetup.log".
2012-10-23 20:57:53 Success MWUSSetup Detected that setup was launched through Server Manager
2012-10-23 20:57:54 Success MWUSSetup Validating pre-requisites...
2012-10-23 20:57:54 Error MWUSSetup Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.)
2012-10-23 20:57:54 Error MWUSSetup WSUS is outdated. But this will not block setup (Error 0x00000000: The operation completed successfully.)
2012-10-23 20:57:57 Success MWUSSetup Incompatible version of ReportViewer installed. Required ReportViewer version: 9.
2012-10-23 20:57:57 Success MWUSSetup Incompatible version of ReportViewer installed. Required ReportViewer version: 9.
2012-10-23 20:58:25 Success MWUSSetup Initializing installation details
2012-10-23 20:58:25 Success MWUSSetup Skipping Asp.Net install since not running on win2k3...
2012-10-23 20:58:25 Success MWUSSetup Installing wYukon using ocsetup
2012-10-23 20:58:25 Success MWUSSetup Installing Windows Internal database using ocsetup with command line as "ocsetup "WSSEE" /quiet /norestart"
2012-10-23 20:58:49 Error MWUSSetup The process ocsetup "WSSEE" /quiet /norestart returned error: 0x643 (Error 0x80070643: Fatal error during installation.)
2012-10-23 20:58:49 Error MWUSSetup ExecCmd failed (Error 0x80070643: Fatal error during installation.)
2012-10-23 20:58:49 Error MWUSSetup Install Windows Internal database: Failed to execute "ocsetup "WSSEE" /quiet /norestart" (Error 0x80070643: Fatal error during installation.)
2012-10-23 20:58:49 Error MWUSSetup CInstallDriver::PerformSetup: Installation of wYukon failed (Error 0x80070643: Fatal error during installation.)
2012-10-23 20:58:49 Error MWUSSetup CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.)
Would anyone on the thread have suggestions for what I might be able to do, to wipe the slate clean with the Internal
Database on this box?
The WID is not used for anything else, but there is other production software installed, (using SQL - not relevant, just
mentioning) and reinstalling the OS is not an option.

PHOTOSHOP CS4, windows 7, error 148:3Cannot uninstall or reinstall from disk?

PHOTOSHOP CS4, windows 7, error 148:3Cannot uninstall or reinstall from disk?

PHOTOSHOP CS4, windows 7, error 148:3Cannot uninstall or reinstall from disk?

Quicktime errors during install, uninstall, or run

Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.

I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
(Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
So let's try investigating that possibility first.
First we'll adjust some view settings on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

How to prevent heap zone errors in iMovie'11

How to prevent heap zone errors before or during a new iMovie11 project

I read the discussion and sounds somewhat similar to how I fixed my heap zone error problem a year ago. I was trying to be proactive before starting my next large project to see if additional info is available.
Info on last year's project and how I corrected it: 40 min project for export to iDVD. OSX Lion, All updates installed, MACMINI lots of free HD space. I tried MANYsuggested discussion fixes available at that time, without success. Finally adopted an approach similar to that in you discussion. Step 1: removed the latest content until an export version worked; Step 2 - added a few minutes of content; Step 3 - exported until heap zone error reappeared; Step 4 - repeated steps 1-3 more than 30 times until able to export the entire project without the heap zone error. A tedious process but it worked. (Note: I was new to Apple and not using Time Machine)

An error prevented the view from loading

I'm using SQL Server 2012 Express and I'm building a report with one table. I dragged and dropped two data set elements into the table that has two columns (Product Name and Product Description). Both the dataset elements have
a data type of varchar (50) in SQL Server 2012 Express. The table with those two elements is the only data I have in Design view. When I click on Preview, the Preview screen states 'An error prevented the view from loading.'. This is difficult
to diagnose, because in the Error List there are '0 Errors', '0 Warnings', and '0 Messages'. I would like help understanding if there is another error log I can observe to understand the issue, or if there are basic SQL Server 2012 Express Reporting
Services debugging techniques. Please help. Thank you,
Additionally, when I run the query in SQL Server 2012 Express and Reporting Services Query Designer the query results are correct.
Also, when I click the start debugging button, the report displays and I can export it to pdf, however the Previous still displays the error.

Well, funny stuff. I shut the solution down yesterday, then I booted my computer today and started the solution AND JUST LIKE MAGIC....it works. I can't explain it. Persistence pays, that's the answer sometimes.

An error prevents the Change Management Upgrade script from executing

I have Warehouse Builder 10g on a database 10g R1.
On a server linux I have the repository, and on other server (Sun 5.9) I have runtimes for production.
I want execute an upgrade deploy action on one object but I get this error:
An error prevents the Change Management Upgrade script from executing successfully. We strongly advise that this Upgrade is UNDONE and the problem is investigated. Data loss may occur if you accept this Upgrade
Any idea?
Thanks,
Fernando.

I review the installation, it was made with a diferent user that database, I get same permission, restart runtimes service and problem was resolved.
Fernando.

FM 12: How do I create a .ps file of a book? (errors prevent PDF generation)

FM 12: How do I create a .ps file of a book? (errors prevent PDF generation)

There's probably a graphic on one of your pages that is causing a postscript division error (i.e. divide by zero?) See also: PostScript error offending command div
As Jeff suggests, track down the errant graphic to see what's wrong. If you print to file, you should get an idea of roughly where in the docs the error occurs by watching the print thermometer display.

I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

Adobe admits to a Flash problem here:
http://forums.adobe.com/message/6285851#6285851
YOu can apply the fix they show and tehn wait for them to fix the problem

Oracle portal uninstall error

hi,
we are trying to uninstall all the portal30 and portal30_sso schemas from oracle portal. we have dropped each of these schemas individually excepting the portal30.
the portal30 schema will not drop the dbms_lob package. it gives us the following error:
ORA-00600: internal error code, arguments: [16201], [], [], [], [], [], [], []
has anyone had such a problem?- is there a way to drop the package without having to reinstall the database?
thanks.
sharadha

The same error manifiest, when the user creates a new page and add an item, the firts time al changes are saved, but when the user like to change information or update this over same item, the changes are not saved. The user has to delete the item an create a new to reflect their changes in the same page, if user move the page to new group the effect is the same.

PXI platform uninstall error 1612

When I was trying to interface a USB-6009 on labview 2012 (32bit), when I would go to the measurement and automation explorer, labview would crash and I would get an error, something to do with PXI, unfortunately I cannot remember and do to what I will explain it is not possible to recreate the error.
Instead of immediately posting on here I went ahead and tried to use the NI install/uninstall/repair utility to repair the system, to no avail. Then I decided to uninstall and reinstall everything, and I managed to uninstall everything but the PXI platform framework, (there are two applications related, I cannot see both). I get a "Error 1612 occurred. Would you like to continue this operation?" message, of course I select yes, and of course it doesn't do anything. So now I have a corrupted install, and I don't see any reason to try to reinstall with the corrupted PXI platform still installed, considering that is what was causing the problems in the first place. I have read elsewhere on this forum about a utility called "msiblast" (which sounds like a virus) that forces a clean uninstall, but cannot find any links to the download. I understand there are some risks involved, but at this point I need to get this to work.
On top of all this, I have a project due this Thursday that relies on labview, so I need to get this fixed ASAP. Since I am a student using a student labview license, I cannot contact technical support directly. My only other option at this point that I can think of is to format the primary drive and install everything from scratch.
Also, some info that may be useful. There have been several major changes to my machine since labview and the DAQ were functioning correctly, as follows:
Cloned primary partition from a platter HDD to a new SDD, and labview was installed on the primary partition.
Installed a basic pci-e SATA controller to manage the optical drive (needed due to the HDD array using all the mobo SATA ports).
Did an upgrade install from Windows 7 64bit to Windows 8 64bit.
I can see any and all of these causing the problem somehow, but I believe I was on the correct path to try to do a clean install of labview and all associated software, even though I was unsuccessful.
Thanks in advance!

Hi kelly.o1
I found the error that you are getting in the NI KnowledgeBase, here is the link the information.
Why Do I Get Error 1612 When Uninstalling NI Software?
I hope that this information might help you.
Regards
Esteban R.

Lightroom 4.4 to Photoshop CS6, "Error: 1, please uninstall and install application again"

Dear all, I have a Problem to open some Files in Lightroom with the dialog "editing with Photoshop CS6". If I will do this with a RAW File, and Photoshop is not open I becomes the error Message "Error: 1, please uninstall and install application again".
If Photoshop open it works?! But when I will open any JPEG, TIFF or PSD File I have always this error message!
I have this Problem on my iMac after installation a SSD and create a Fusion Drive. MAC OS Version 1.8.3.
My attempt at a solution:
Uninstall and reinstall Lightroom 4.4. and delete the preferences "http://helpx.adobe.com/lightroom/kb/recover-catalog-images-resetting-lightrooms.html#id_90 046"
Uninstall and reinstall Photoshop CS6 (I use the Creative Cloud Version) and delete the Preferences "http://helpx.adobe.com/photoshop/using/preferences.html"
Nothing help
Have someone an Idea?
My Solution: I found the Problem, the Lightroom Katalog have a Problem. I must create a new one and the Problem was solved.
Nachricht geändert durch FrankyW1966

Are you try CC Cleaner Tool?
CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Installation failed. Error U44M1P7 | Updates / uninstalled adobe photoshop CS6 in control panel now

installation failed. Error U44M1P7 | Updates / uninstalled adobe photoshop CS6 in control panel now cant find it back in thwe creative cloud so were do i get to reinstall it

Hi scubamedicjoe,
Please refer the kb to install CS6: http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html .
Regards,
Romit Sinha

HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Weird error preventing QT uninstall (Error 2330.23)

Similar Messages

Maybe you are looking for