Weird flash and dim in QT after FCE export
Hi everyone,
Occasionally, my movies will export with strange effects like when still picture will dim after a little while on screen (similar to laptop dimming due to energy saver settings) and a hard cut to another picture with flash with white even if I do not have a transition in place. What gives?
p.s. I have rendered everything until there are no more check marks left to click, I have messed around a little with frame rates and keyframes and I have saved and I don't know what to do next.
Thanks in advance for any tips you have!
Concertpix wrote:
...Now render before exporting to QT, I suppose?
You don't really have to. Exporting is kinda the same as rendering. Only thing is that if you do not render before export, FCP does not 'remember' this rendering.
If you think you'll needs parts of the render files later, you might render first.
Others in this forum do deliberately throw away the renders before they export, in order to avoid artifacts. Personally I prefer to see rendered footage before I export. I can see what I am sending to the export-application then. Haven't have any trouble so far.
So. It's up to you.
Rienk
Similar Messages
-
Screen flashes and then goes black after CPU load
Yesterday morning I upgraded my MacBook Pro 6,2 (Mid 2010) to OS X Lion. Since then I've been having issues while performing CPU-not-too-intensive tasks. Every once in a while my screen flashes for a split second and then turns completely black. The MBP is unresponsive so I'm forced to shut it down using the power button.
At first i though this was a Lion issue. However, it has happened again just now while I was on Windows through BootCamp. I was checking my e-mail and performing some other mundane tasks for about an hour, and then while trying to copy some files to an external Hard Drive my screen flashed and went black.
Hardware issue then??
Any help would be greatly appreciated.It's already happened 4-5 times right when I pressed Cmd+D to bookmark a site on Safari. What the heck? That isn't even a CPU load.
Here's the error report:
Interval Since Last Panic Report: 26887 sec
Panics Since Last Report: 14
Anonymous UUID: D5913603-D6D0-4A1E-9827-257C6E51A196
Mon Jul 25 19:40:23 2011
panic(cpu 0 caller 0xffffff7f809522bf): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80a071c000 0x0a5480a2, D0, P3/4
Backtrace (CPU 0), Frame : Return Address
0xffffff807d40b100 : 0xffffff8000220702
0xffffff807d40b180 : 0xffffff7f809522bf
0xffffff807d40b210 : 0xffffff7f80a423fc
0xffffff807d40b260 : 0xffffff7f80a424bc
0xffffff807d40b2c0 : 0xffffff7f80cec749
0xffffff807d40b400 : 0xffffff7f80a61519
0xffffff807d40b430 : 0xffffff7f8095bc4a
0xffffff807d40b4e0 : 0xffffff7f8095754c
0xffffff807d40b6d0 : 0xffffff7f8095881f
0xffffff807d40b790 : 0xffffff7f817b8876
0xffffff807d40b8a0 : 0xffffff7f817b8d6c
0xffffff807d40b8c0 : 0xffffff7f8178a84c
0xffffff807d40b8e0 : 0xffffff7f8178b87d
0xffffff807d40baa0 : 0xffffff7f817d399a
0xffffff807d40bb60 : 0xffffff7f817888fd
0xffffff807d40bbc0 : 0xffffff8000651f8e
0xffffff807d40bbe0 : 0xffffff800065286a
0xffffff807d40bc40 : 0xffffff8000652ff0
0xffffff807d40bd80 : 0xffffff80002a3738
0xffffff807d40be80 : 0xffffff8000222ff6
0xffffff807d40beb0 : 0xffffff8000214829
0xffffff807d40bf10 : 0xffffff800021bb58
0xffffff807d40bf70 : 0xffffff80002ae380
0xffffff807d40bfb0 : 0xffffff80002d83a3
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000->0xffffff7f80bc8fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f8087e000
dependency: com.apple.iokit.IONDRVSupport(2.3)[E99C8907-946D-3F1A-A261-4C0F2D5D0451]@0xffff ff7f808e0000
dependency: com.apple.iokit.IOGraphicsFamily(2.3)[897EB322-FD55-36D7-A68E-9E9C34A74A84]@0xf fffff7f808a8000
com.apple.nvidia.nv50hal(7.0.2)[2E84958C-1EEC-316B-9F7A-68C368F83476]@0xffffff7 f80bc9000->0xffffff7f80eeafff
dependency: com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000
com.apple.GeForce(7.0.2)[18E50F21-1E7F-3FFE-B298-7CD7A11879F8]@0xffffff7f8177d0 00->0xffffff7f81839fff
dependency: com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000
dependency: com.apple.iokit.IONDRVSupport(2.3)[E99C8907-946D-3F1A-A261-4C0F2D5D0451]@0xffff ff7f808e0000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f8087e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3)[897EB322-FD55-36D7-A68E-9E9C34A74A84]@0xf fffff7f808a8000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 119605728603
last loaded kext at 58454533114: com.paragon-software.filesystems.ntfs 82 (addr 0xffffff7f8217f000, size 278528)
loaded kexts:
com.paragon-software.filesystems.ntfs 82
com.logmein.hamachi 1.0
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHDA 2.1.1f11
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AppleMikeyDriver 2.1.1f11
com.apple.driver.AppleIntelHDGraphics 7.0.2
com.apple.driver.AGPM 100.12.40
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleIntelHDGraphicsFB 7.0.2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AppleMuxControl 3.0.8
com.apple.GeForce 7.0.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.1.9
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 220.8
com.apple.driver.AppleIRController 309
com.apple.driver.AppleUSBCardReader 3.0.0
com.apple.driver.AppleUSBTCKeyEventDriver 220.8
com.apple.driver.AppleUSBTCKeyboard 220.8
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.0.6b9
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AirPort.Brcm4331 500.20.6
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleUSBUHCI 4.4.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.1f11
com.apple.driver.DspFuncLib 2.1.1f11
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.1.1f11
com.apple.iokit.IOHDAFamily 2.1.1f11
com.apple.driver.AppleGraphicsControl 3.0.8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.0.2
com.apple.NVDAResman 7.0.2
com.apple.iokit.IONDRVSupport 2.3
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.kext.triggers 1.0
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.0
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.driver.AppleUSBMultitouch 220.23
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IO80211Family 400.40
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.100.98.75.6)
Bluetooth: Version 2.5.0f17, 2 service, 12 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3 -
i tried to update my software for apple tv and it will not restart after update. flashing lights
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Is there any way to fix the flash and poor photo quality after iOS 7 upgrade?
Hi everybody,
Since upgrading to the new iOS 7 on my iPhone 5 ... I have experienced poor photo (grainy) and the flash works when it feels like it... Is there any way
possible to revert back at least on the camera settings or is there a fix that can be downloaded to solve this problem? I take and use my camera a lot on my iphone5 and for me to have this problem it has made me really regret ever upgrading and I am starting to lose my faith in Apple products. I have searched the entire web and it appears there are a ton of people experiencing this same problem.!!!!Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
HP desktop won't start, red light flashing and beeping, loud fan
Yesterday it was working just fine. I turned it off for the night and when I tried to turn it on this morning, a red light was flashing and beeping as well as the fan making a loud humming noise. I've read the the beeping and flashing means something. I didn't keep track of the number of flashes and beeps though. After the beeping and flashing I turned the computer off then back on. This time there was no red light, flashing, or beeping. Nothing appeared on the monitor either. After about 10-20 seconds of it being on, the fan started to hum really loudly again.
It's an HP Compaq dc7900. I've only had it for about 3 months and it was fine up until now.
Any help? Thanks.Hi
I'v checked the specs for your HP and Acer machines and yes it will be fine to cross over RAM modules they are identical in speed and architecture . Please don't forget the last post about removing the sources of power before you go inside the PC to check RAM . Other thing is if your HP has more than one RAM module remove only one stick first and try to boot . If it still won't boot with that module take that one out and try to boot from the other before you look to swap over modules from Acer machine . Don't forget to re connect your monitor to see if you get display with one / two etc modules . Post me back your findings
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem**** -
My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?
Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?
I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/ -
Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps. -
my downloaded apps are not opening, they flash and then shut down. This hapened after i upgraded to the 5.0. How do i fix it!? I've tried everything
You need to resync you applications or redownload them for free via app store. They may be read by your phone, but they are really not there. Re downloading will fix this.
-
Why ill the flash player not intialize even after disabling firewall and antivisurs software
Why will the flash player not intialize even after disabling firewall and anitvirus software?
Windows XP and internet exployer? I can get the flash player to begin the
download but stops at about 50% initalization
Greenleaf Compaction, Inc.
142 W. Main
P.O. Box 265
Hopkins, MI 49328
Phone: 1-877-552-9369
Fax: (269) 793-7298
New email address: [removed] -
While typing on my macbooc air suddenly the screen ent almost blank, pale. After closing the device and openning it again it flashed and started working normally. Is it dangerous or its fine?
Hello,
According to your user agent, you are on Firefox 32. If you planned to use Firefox 31 ESR, you can grab a copy here:
* https://www.mozilla.org/en-US/firefox/organizations/
Out of curiosity, when it turns transparent, is there a "(Not Responding)" appended to the end of the window title? If you don't have the Window title being shown, it might show up if you have window titles shown on your taskbar, or in the task manager (right click on your taskbar and select "Start Task Manager"). If you do see a Not Responding, it could be a slow script on one of the pages you are viewing.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
I have a iPad 3 (wifi+cellular). Today I updated with the latest software update. But after the installation of the update it doesn't start. Again and again the apple logo flashes and nothing happens. I tried to reset it by accessing it through iTune. But it is not recognized by iTune. Please help.
Hello bhar.suman,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Have a nice day,
Mario -
I am concerned if it is safe to use Adobe Flash and plug in in Firefox after yesterdays news alert :
Considering that the vulnerability is in Internet Exploder... I'd have to say "yes".
-
Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?
What I suggest you do here is to use Adobe's uninstaller tool to uninstall Flash first of all: http://kb2.adobe.com/cps/141/tn_14157.html
Then reboot, go to http://get.adobe.com/flashplayer/ and reinstall it.
I notice too that you have an outdated version of Shockwave For Director. You can update that via http://get.adobe.com/shockwave/ -
I need to update illustrator, flash and after effects and I keep getting the same error 49 over and over. Please help thanks!
Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088
Maybe you are looking for
-
Problems opening a New Tab in Safari from Bookmark Bar Folder
When I am in Safari and attempt to Open a link to a new tab from the Bookmark Bar that is part of a Folder on the Bookmark bar it does nothing. I can change the preferences to auto-click for the Bookmark Folders, but then every link loads when I try
-
Change the status of a Support Desk Message in Sol. Man.
Hello, On the Solution manager system I have configured the service desk functionality. So end users are able to create support messages from the satellite systems as well on the solution manager system. For the confirmation of a proposed solution I
-
How to handle the unsuccessful execution of a procedure through exception
I have to run a sequence of procedures through a procedure. The execution of a succeeding procedure depends on the successful execution of the preceding procedure.What i want is that a procedure is only executed when the preceding procedure is succes
-
Apparently my question was completely moronic! People on other forums have just told me that --duh-- all I need to do is add some RAM and upgrade the OS to Tiger or Leopard. I have been told for years by someone who should know better that I am stuck
-
Black and white photo of child with undisturbed eye color?
How can I get this effect?