Weird formatting behavior in Notes

I use the Notes option in Mail quite a bit.
I always had some trouble with the formatting in Notes, but unfortunately, lately it is to the point where if copy and cut a line of text, and move the cursor to another part of the Note, then paste, the content appears at the bottom of the Note, and the cursor will not let itself be put there.
Does anyone have any suggestions on how to fix this, or avoid it?
Thanks.
Mac

Grant Hiesterman wrote:
Out of curiousity, how were the issues fixed/resolved other the past?  With IOS updates? Other?
The problem has always been an errant app that got stuck in a loop. It can happen any time, but is more likely to happen right after an update. My hypothesis is that the update process suspends running apps, and sometimes after the update they "lose their place" and spin their wheels trying to find it. (It's easier to say it that way then to talk about race conditions.) What will frequently fix it is to run the battery all the way down until the phone shuts off. This terminates all processes, even those that cannot be killed from the Quick Launch screen.
You can also try to find the app; if it's email turning off any Push email accounts, rebooting, and turning them back on will frequently fix it. If it's a 3rd party app killing all apps in the Quick Launch will frequently fix it.
Sometimes just turning off the phone for a few minutes will fix it.
Restoring the phone as new will usually fix it, but restoring from backup may not, because the app state may be preserved in the backup.
It really just a matter of trying things like these one at a time. One of them will work.
Do you or Trevor have a CPU monitoring app you believe is a quality application?
I've tried several, and haven't found any that I like. I like Trevor's answer.

Similar Messages

  • IPhone 6 Plus weird screen behavior

    I recently started noticing some erratic touch behavior on my screen, it's as if I have a possessed phone such as taps that I did not make, or swipes (up/down/left/right) as well. The spotlight randomly swipes down, or the notification center (it seems like a consistent swipe down behavior but at different locations). I couldn't swipe left yesterday to unlock my phone, and sometimes hangs and only locking/unlocking can fix the unresponsiveness.
    Moreover, random tappings affect games and apps such as whatsapp, where it goes to the previous page due to a top left page tap, and then again on the edit button, then starts randomly scrolling up and down and tapping random parts of the screen.
    This is quite frustrating, I tried formatting and starting the phone as a new one and only installed Whatsapp, but the problem persisted, albeit at fewer occurrences.
    Now I noticed the problem again even though I'm on iOS 8.1, with only apps, music, and photos synced back from iTunes. What is happening ? How can I get this fixed ?
    Summary
    Issue :
    Erratic touch behavior which cannot be produced on demand
    Rare screen unresponsiveness following the weird touch behavior
    What I've tried :
    Reset and start phone as New
    Reset all Settings
    Hard Reset
    Currently using a sketching app to see how the screen taps randomly (for proof as well).

    Hello zazu90,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your touchscreen is behaving erradically on your iPhone, please follow the steps below.
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response - Apple Support
    Take care,
    Alex H.

  • Importing Word Docs causes weird formatting that I can't seem to get rid of

    Not really "importing".. but when I drag a Word doc into InDesign, sometimes.. there is some weird formatting from the Word document that I can't get rid of.
    For example, I just dropped a word document in and everything is fine and behaves properly EXCEPT the title of the document. It will not left align to the document. It looks like it is tabbed about 3 tabs to the right... but there are no tabs and I can not get it to left align.
    Now.. I can fix this easily by re-typing it.. but is there a way to select all the text in the text box and do something to it to get rid of the odd spacing?
    Thanks,
    Chris
    IDCS3

    >Now.. I can fix this easily by re-typing it.. but is there a way to select all the text in the text box and do something to it to get rid of the odd spacing?
    Left indent? First line indent?

  • Strange stacks icons and weird dock behavior

    I got leopard for Christmas and on the first day of the install my icons on the right side of the dock- i guess the stacks for applications and downloads icons look weird. It's not a combination of all the icons in the stack like someone else wrote, it is a weird green, white, red rectangular shaped image with weird black and grey squiggles going through the middle. Also-I'm not sure how to describe it but what used to be a clear line I guess to separate the stacks stuff with the other icons on my dock it's next to about this mac icon on my dock has turned into a weird pink rectangle with a really small picture of the weird red, green, and white rectangle on top. Any help would be greatly appreciated. My husband is a windows guy and after me bragging about how much better mac is, I don't want him to know that I'm already having problems with leopard

    No, this is not "normal behavior." The problem is that it is not consistent, either, so it is hard to tell what is going on. It may happen after using some full screen programs, but I am not sure. I am not able to reproduce the issue, myself. It just happens from time to time.
    The icons are not changing after they are used. The ones in the download folder will usually have their normal appearance, the dmg file or a pdf file with its "preview" icon or whatever. Then, for some reason, I will notice some of the icons have become blocky and pixilated, not resembling anything, usually almost a solid color.
    Again, the way to get them to change back is to remove the downloads folder from the doc and return it. Then all the icons return to their normal view.

  • Had 1418 error.formatted as fat.not fat32.now ipod doesnt work.why?plz help

    The iTunes keeps saying that:
    "The iPod "IPOD" cannot be updated. The disk could not be read or written to"
    "The iPod "IPOD" cannot be updated.
    And when I tried to restore it.
    "The iPod "IPOD" could not be restored. An unknown error occurred (1418)"
    thats a dreaded problem and i researched at many forums on how to solve it.....
    before reading ur reply....there were some other replies that i read.....
    which told me to format my ipod into fat partition...and not fat32 partition....then we had to update it and then restoring it would be possible........
    that was the only article which i came across and which had a solution to 1418 problem......
    so i began my work....
    but as soon as i formatted my ipod shuffle second generation into fat partition.......
    i restarted my comp...and then.the ipod is no longer working.......
    if i push it to on......then there is a constant green light on it which does not go off even if i connect it to comp. using the dock provided.......
    if i put it off,the green light goes off....
    ideally when an ipod shuffle is connected to pc..there is an orange light that starts blinking ,that shows that the ipod is being charged.
    but now when i connect mine.....
    the green light blinks only once......and then nothing happens...
    the device isnt working and so i cant even solve my 1418 problem ,as now i even have the solution.......
    help me plz....
    its really urgent....
    its been just a month my uncle gifted me this ipod ...he stays in north carolina........and i stay in india.....
    i dont even know if there are service centres of apple available in mumbai.and if they are,whether they are trust worthy or the ipod that i send to them might never to me and get stolen or something.....somebody might just keep it and say that its lost.......mumbai is not trustworthy.
    but if there is a recognized apple service centre then i would want to go there and get my ipod repaired....i have one-year warranty with me.......but i dont know if the warranty of a product bought in north carolina works in india......
    i cant throw this ipod....cause its my first ipod and it has hardly been time that i got it...its too early for me to throw it.....
    i dont know why the ****.....cant i connect it to the comp...
    i tried the following: after getting 1418 read and write error...:
    reinstalled the itunes 7.0.2
    reinstalled the drivers......
    reset the ipod shuffle...
    restarted my computer several times.....
    checked the cable....
    plugged the usb cable onto another port...
    scanned the comp for viruses......
    now the only thing left is that i think.....there can be a problem with the jack where the dock is plugged.....
    maybe thats the reason my ipod isnt working...
    even if i formatted into fat partition rather than fat32 partition,it should atleast be connected......
    should atleast charge.....
    should atleast be detected......
    my ipod is not even getting detected by the comp as any unknown device also.....forget as an ipod....
    i just shouldnt have formatted it...
    although i think....that formatting it did not lead to this problem......
    please help me.......
    urgently...........
    plz.....
    plz......send ur reply fast..plz help me.........
    get this ipod to work......
    i will fix the 1418 error myself....
    just get this device to work....so that comp starts detecting that i have connected something thru usb.....

    On top of the two suggestions already given, make sure that the drive letter being assigned to the ipod when you plug it in in windows is not also a drive letter being assigned to another drive. I've heard that this happens occasionally and can cause all kinds of conflicts, from problems you are describing to lockups when trying to sync.
    I would also try it on a different computer to see if that helps. Maybe you've got a friend or a computer at work that you can install itunes on and give it a shot there. This will let you know whether it's a problem with your specific computer or if it's a problem with the ipod.
    The fact that it runs in Windows and you were able to reformat the flash memory stick tells me that the Ipod is working, but that something on your computer is not.
    P.S. Obviously you've had it for 90 days, So I must assume that the USB port is working correctly. Otherwise the Ipod's battery would have drained by now. So I don't believe it is a hardware issue. So move past that for right now and look to your computer's settings for the answer.

  • Advanced Format Hard Drive not recognized by HP DV6000 Controller

    Hello,
    I have an HP DV 6000 laptop (6276 I think, I'm at work can't check) that came preinstalled with a Western Digital 160gb 1.5gb/s 5400 RPM drive (Vista) that failed a couple of weeks ago.  So i bought a Western Digital 750 GB WD Black SATA III 7200 RPM 16 MB drive to replace it. I read about people having some problems with Advanced Drive Format hard drives not being recognized by their controller, but also read that depending on the controller and specific Dv6000 model laptop they had-one wouldn't run into problems. 
    Well sure enough, when attempting to install Windows 7 I received the error that the hard drive was not detected. After researching online I came across an article on WD's site that noted
    "Our SATA II hard drives use autospeed negotiation. This enables our SATA II drives to automatically detect the motherboard data transfer rate, making it backward compatible with SATA I data transfer rates. However, some older SATA I controllers are unable to support autospeed negotiation and cannot recognize the drive. This “drive not detected” condition occurs when a chipset is incapable of correctly negotiating the data transfer speed with a SATA II hard drive."
    my drive is a SATA ||| but I'm pretty sure it's the same problem.  The site goes on to say a fix would be to  "purchase and install a third party PCI or PCI-Express Second Generation Serial ATA controller card for your Serial ATA hard drive(s)."
    My question(s) are.
    1)Is the problem that I am trying to install a Sata ||| hard drive on a laptop with a controller that will only recognize SATA | hard drive?
    2) Or is the problem that the hard drive is an Advanced Drive Formatted hard drive and I need to buy a hard drive with out that specification?
    3) Or Should I buy a SATA controller card as WD suggests on their website and if so will this definitely allow my laptop's controller to recognize the new hard drive and proceed with the installation?
    4)Or Should I just return the hard drive and buy a SATA | non Advanced Drive Format hard drive? (question 2 basically)
    Thanks for your help!

    Hi @jasmine00 
    Welcome to the HP Support Forums.
    I certainly understand your issue with the drive upgrade. Unfortunately it is a bit of the nature of notebooks, the sacrifice of a large amount of upgradeability, in exchange for compactness and portability. Whenever a new technology comes out, older notebooks are never really going to be easy to upgrade, it at all. Normally the unit as a whole is tested with a set list of hardware, and only those items are supported.
    That being said there is this document that could be helpful with your problem.
    Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
    And for your reference:
    HP Pavilion dv6000 Notebook PC Maintenance and Service Guide
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • I had a second hard drive added to my Mac Pro.  How do I format it and not effect my orginal hard drive?

    I had a second hard drive added to my Mac Pro.  How do I format it and not effect my orginal hard drive?

    Just format it with Disk Utility as mentioned above.  Select the new disk on the list at the left.  Click the erase tab.  Specify Mac OS Extended (Journaled) if not already specified and give the disk a name of your choice.  Then click the erase button.
    That's the simplest way to format a disk with a single partition (volum). If you want to create multiple volume (partitions) then click the Partition tab instead of Erase.  You can then use then specify a number of volumes and size each volume by specifying its size or just dragging the slider in the bootm right of each partition.  Give each a name as before and again Mac OS Extended (Journaled).  Click Apply button to create the partitions.
    Since you appear to be new at this just "play" with the erase and partition settings so you can become comfortable with them.  So long as you have the new disk selected on the left you can't really hurt anything since it's a new disk and no data to loose.  You can always go back and erase it back to a single partition.

  • When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files.  Even if I perform a "save as" to the correct file name the file format is still not recognized.  Why is this happening!?

    When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files.  Even if I perform a "save as" to the correct file name the file format is still not recognized.  Why is this happening!?

    http://www.joshjacob.com/mac-development/tnef.php

  • I am having trouble getting a numbers spreadsheet to hold different formats in the same column.  A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

    I am having trouble getting a numbers spreadsheet to hold different formats in the same column.  A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

    Hi Wayne,
    Thank you for this response.  I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.  
    Kind regards
    Paul

  • Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

    I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
    Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

    Can you post an ipconfig /all from the server and the DC?
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Exchange 2010, khi: failed to execute Troubleshoot-DatabaseSpace.ps1 Error formatting a string: Format string is not supported

    Hi,
    Exchange 2010 MP fails to run Troubleshoot-DatabaseSpace.ps1. Results in a Warning with "Error formatting a string: Format string is not supported". The EventNumber is 402. The Microsoft article it points to is useless at http://technet.microsoft.com/en-us/library/749e0eac-ebb2-41e3-8fa2-4a03a1bd3571.aspx 
    Run ".\Troubleshoot-DatabaseSpace.ps1 -Server MailboxServer.domain.com -MonitoringContext" and works fine.
    Any help appreciated.
    thanks

    Hi,
    Before the newer MP release, we can disable  these 4 monitor via override and this should not run the Troubleshoot-DatabaseSpace.ps1 :
    KHI: Failed to execute Troubleshoot-DatabaseSpace.ps1.
    KHI: The database copy is low on database volume space and continues to grow. The volume is under 25% free
    KHI: The database copy is low on database volume space and continues to grow. The volume has reached error levels under 16% free.
    KHI: The database copy is low on database volume space and continues to grow. The volume has reached critical levels 8% free.
    Alex Zhao
    TechNet Community Support

  • JMF error - Format of Stream not supported in RTP Session Manager

    java.io.IOException: Format of Stream not supported in RTP Session Manager
    at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
    why this erro occors?
    I already created the DataSink.
    When I try to do this...
    dsk.open(); //here the error got
    dsk.start();     Code of server of media
    I want to sent audio (wav) like a radio, but from file. Without stop to send streaming. PullBufered
    *Class Server that you offers Streaming of midia
    public class Servidor {
    private MediaLocator ml;
    private Processor pro;
    private javax.media.protocol.DataSource ds;
    private DataSink dsk;
    private boolean codificado = false;
    //start the server service, passing the adress of media
    // ex: d:\music\music.wav
    // pass the ip and port, to make a server works
    public void iniciarServicoServidor(String end,String ip, int porta)
    try {
    //capture media
    capturarMidia(end);
    //creates processor
    criarProcessor();
    // configure the processor
    configurarProcessor();
    //setContent RAW
    descreverConteudoEnviado();
    //format the media in right RTP format
    formatRTP();
    //creat the streaming
    criarStreaming();
    //configure the server
    configurarServidor(ip, porta);
    //in this method raise the excepition
    iniciarServidor();
    //when I try to open the DataSink.open() raises the exception
    //java.io.IOException: Format of Stream not supported in RTP Session //Manager
    // at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
    } catch (RuntimeException e) {
    System.out.println("Houve um erro em iniciarServicoServidor");
    e.printStackTrace();
    public void capturarMidia(String endereco)
    try {
    System.out.println("**************************************************************");
    System.out.println("Iniciando processo de servidor de multimidia em " + Calendar.getInstance().getTime().toString());
    ml = new MediaLocator("file:///" + endereco);
    System.out.println("Midia realizada com sucesso.");
    System.out.println ("[" + "file:///" + endereco +"]");
    } catch (RuntimeException e) {
    System.out.println("Houve um erro em capturarMidia");
    e.printStackTrace ();
    public void criarProcessor()
    try {
    System.out.println("**************************************************************");
    pro = Manager.createProcessor(ml);
    System.out.println("Processor criado com sucesso.");
    System.out.println("Midia com durcao:" + pro.getDuration().getSeconds());
    } catch (NoProcessorException e) {
    System.out.println("Houve um erro em criarProcessor");
    e.printStackTrace();
    } catch (IOException e) {
    System.out.println ("Houve um erro em criarProcessor");
    e.printStackTrace();
    public void configurarProcessor()
    try {
    System.out.println("**************************************************************");
    System.out.println("Processor em estado de configura��o.");
    pro.configure();
    System.out.println("Processor configurado.");
    } catch (RuntimeException e) {
    System.out.println("Houve um erro em configurarProcessor");
    e.printStackTrace();
    public void descreverConteudoEnviado()
    try {
    System.out.println("**************************************************************");
    pro.setContentDescriptor(new ContentDescriptor(ContentDescriptor.RAW));
    System.out.println("Descritor de conteudo:" + pro.getContentDescriptor().toString());
    } catch (NotConfiguredError e) {
    System.out.println("Houve um erro em descreverConteudoEnviado");
    e.printStackTrace();
    private Format checkForVideoSizes(Format original, Format supported) {
    int width, height;
    Dimension size = ((VideoFormat)original).getSize();
    Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
    Format h263Fmt = new Format(VideoFormat.H263_RTP);
    if (supported.matches(jpegFmt)) {
    // For JPEG, make sure width and height are divisible by 8.
    width = (size.width % 8 == 0 ? size.width :
    (int)(size.width / 8) * 8);
    height = (size.height % 8 == 0 ? size.height :
    (int)(size.height / 8) * 8);
    } else if (supported.matches(h263Fmt)) {
    // For H.263, we only support some specific sizes.
    if (size.width < 128) {
    width = 128;
    height = 96;
    } else if ( size.width < 176) {
    width = 176;
    height = 144;
    } else {
    width = 352;
    height = 288;
    } else {
    // We don't know this particular format. We'll just
    // leave it alone then.
    return supported;
    return (new VideoFormat(null,
    new Dimension(width, height),
    Format.NOT_SPECIFIED ,
    null,
    Format.NOT_SPECIFIED)).intersects(supported);
    public void formatRTP()
    try {
    // Program the tracks.
    TrackControl tracks[] = pro.getTrackControls();
    Format supported[];
    Format chosen;
    for (int i = 0; i < tracks.length; i++) {
    Format format = tracks.getFormat();
    if (tracks[i].isEnabled()) {
    supported = tracks[i].getSupportedFormats();
    // We've set the output content to the RAW_RTP.
    // So all the supported formats should work with RTP.
    // We'll just pick the first one.
    if (supported.length > 0) {
    if (supported[0] instanceof VideoFormat) {
    // For video formats, we should double check the
    // sizes since not all formats work in all sizes.
    chosen = checkForVideoSizes(tracks[i].getFormat(),
    supported[0]);
    } else
    chosen = supported[0];
    tracks[i].setFormat(chosen);
    System.err.println("Track " + i + " is set to transmit as:");
    System.err.println(" " + chosen);
    codificado = true;
    } else
    tracks[i].setEnabled(false);
    } else
    tracks[i].setEnabled(false);
    } catch (RuntimeException e) {
    // TODO Auto-generated catch block
    e.printStackTrace();
    public void tocar()
    pro.start();
    public void criarStreaming()
    try {
    System.out.println("**************************************************************");
    if (codificado)
    System.out.println("Midia codificada...");
    System.out.println("Processor entra em estado de realize.");
    pro.realize();
    System.out.println("Processor realized.");
    System.out.println("Adquirindo o streaming a ser enviado.");
    ds = pro.getDataOutput();
    System.out.println("Streaming adquirido pronto a ser enviado.");
    } catch (NotRealizedError e) {
    System.out.println("Houve um erro em criarStreaming");
    System.out.println(e.getMessage());
    e.printStackTrace();
    catch (Exception e) {
    System.out.println(e.getMessage());
    public void configurarServidor(String ip, int porta)
    System.out.println("**************************************************************");
    String url = "rtp://" + ip + ":" + porta + "/audio/1";
    System.out.println("Servidor ira atender em " + url);
    MediaLocator mml = new MediaLocator(url);
    System.out.println("Localizador de midia ja criado");
    try {
    System.out.println("Criando um DataSink a ser enviado.");
    dsk = Manager.createDataSink(ds, mml);
    System.out.println("DataSink criado.");
    } catch (NoDataSinkException e) {
    e.printStackTrace();
    public void iniciarServidor()
    try {
    System.out.println("**************************************************************");
    dsk.open();
    System.out.println("Servidor ligado.");
    dsk.start();
    System.out.println("Servidor iniciado.");
    } catch (SecurityException e) {
    e.printStackTrace();
    } catch (IOException e) {
    e.printStackTrace();
    Gives that output console.
    All methods are executed but the last doesnt works.
    The method that open the DataSink.
    What can I do?
    Iniciando processo de servidor de multimidia em Sun May 13 22:37:02 BRT 2007
    Midia realizada com sucesso.
    [file:///c:\radio.wav ]
    Processor criado com sucesso.
    Midia com durcao:9.223372036854776E9
    Processor em estado de configura��o.
    Processor configurado.
    Descritor de conteudo:RAW
    Midia codificada...
    Processor entra em estado de realize.
    Processor realized.
    Adquirindo o streaming a ser enviado.
    Streaming adquirido pronto a ser enviado.
    Servidor ira atender em rtp://127.0.0.1:22000/audio/1
    Localizador de midia ja criado
    Criando um DataSink a ser enviado.
    streams is [Lcom.sun.media.multiplexer.RawBufferMux$RawBufferSourceStream;@a0dcd9 : 1
    sink: setOutputLocator rtp://127.0.0.1:22000/audio/1
    DataSink criado.
    Track 0 is set to transmit as:
    unknown, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
    java.io.IOException: Format of Stream not supported in RTP Session Manager
    at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
    at br.org.multimidiasi.motor.Servidor.iniciarServidor(Servidor.java:291)
    at br.org.multimidiasi.motor.Servidor.iniciarServicoServidor(Servidor.java:43)
    at br.org.multimidiasi.motor.ConsoleServidor.main(ConsoleServidor.java:30)
    Since already thanks so much.
    Exactally in this method raises erros.
    Ive tried another formats (avi, mp3) but all with the same error, what I can do?
    [code] public void iniciarServidor()
    try {
    System.out.println("**************************************************************");
    dsk.open();
    System.out.println("Servidor ligado.");
    dsk.start();
    System.out.println("Servidor iniciado.");
    } catch (SecurityException e) {
    e.printStackTrace();
    } catch (IOException e) {
    e.printStackTrace();
    Track 0 is set to transmit as:
    unknown, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
    java.io.IOException: Format of Stream not supported in RTP Session Manager
    at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
    at br.org.multimidiasi.motor.Servidor.iniciarServidor(Servidor.java:291)
    at br.org.multimidiasi.motor.Servidor.iniciarServicoServidor(Servidor.java:43)
    at br.org.multimidiasi.motor.ConsoleServidor.main(ConsoleServidor.java:30)

    unknown, 44100.0 Hz, 16-bit, Stereo,
    LittleEndian, Signed, 176400.0 frame rate,
    FrameSize=32 bits
    java.io.IOException: Format of Stream not supported
    in RTP Session Manager
    The fact that it doesn't know what the format is
    might have to do with the problem. I've had similar
    problems, and I've traced it back to missing jars and
    codecs. Have you tried running the same code locally
    without the transmission to see if you player will
    even play the file?Already and it works, I used Player to play it and play normally, I try to make it with the diferents codecs of audio and video, but no sucess.

  • Format Trigger - do not display frame if multiple FIELDs are 0

    Hello,
    I am having trouble creating a format trigger to NOT display a frame if a multiple fields within the frame are 0.0
    The field is named F_number1, F_number2, F_number3
    The frame is called M_numberframe
    All 3 of the fields listed have to be 0.0 in order to not display the frame. If only one is 0 then they still all three need to show.
    Thanks!

    Hello
    The field is named F_number1, F_number2, F_number3These are actually field name's. You will have to write the source name in the format trigger.
    Let say F_NUMBER1 is having souce as my_field1, F_NUMBER2 = my_field2, F_NUMBER3 = my_field3 then
    Go to the frame's PL/SQL Editor by selecting and pressing F11 and write the as below...
    IF :my_field1=0 AND :my_field2=0 AND :my_field3=0 THEN
      RETURN FALSE;
    ELSE
      RETURN TRUE;
    END IF;-Ammad

  • Format that does not permit data modification?

    When I try to change date/time of some images, I get this message.
    +"Aperture was not able adjust the date and time of the master files because they have a format that does not permit date modification."+
    While some images are modified successfully, others are not. Those files are not locked nor wrong permission setting. Anybody know what is causing this? The files are all Nikon's NEF files.

    kfuse wrote:
    When I try to change date/time of some images, I get this message.
    +"Aperture was not able adjust the date and time of the master files because they have a format that does not permit date modification."+
    While some images are modified successfully, others are not. Those files are not locked nor wrong permission setting. Anybody know what is causing this? The files are all Nikon's NEF files.
    hi, kfuse
    unless I'm mistaken you cannot edit the exif data created from the camera like date and time. you might want to do a search about this subject in our forum, there was a big brouhaha regarding this about a couple of years ago regarding a court case and exif date/time data.
    victor

  • Create many pages is too slow, is there a way to format each page, not all?

    i'm creating hundreds of pages of report (very complicated report)
    when i using cliend/server version of oracle report, it created only the page
    user is viewing, and rest is not yet formatted.
    so even it has thousands of pages, since not all the pages were formatted,
    performance was not an issue,
    but now, using 10G, report is created using browser as html page instead
    of oracle's own cliend/server thing,
    if the report has thousands of pages, it is very slow since whole report is
    created and it has to wait till every page is formatted before displaying the
    first page.
    pagestream just changed the way it's displayed but still it formatted all the
    pages before displaying first page
    is there any way to format pages only when it's being viewed?
    or any other way to boost the performance?
    now it's pretty much unacceptably slow
    thanks

    i'm creating hundreds of pages of report (very complicated report)
    when i using cliend/server version of oracle report, it created only the page
    user is viewing, and rest is not yet formatted.
    so even it has thousands of pages, since not all the pages were formatted,
    performance was not an issue,
    but now, using 10G, report is created using browser as html page instead
    of oracle's own cliend/server thing,
    if the report has thousands of pages, it is very slow since whole report is
    created and it has to wait till every page is formatted before displaying the
    first page.
    pagestream just changed the way it's displayed but still it formatted all the
    pages before displaying first page
    is there any way to format pages only when it's being viewed?
    or any other way to boost the performance?
    now it's pretty much unacceptably slow
    thanks

Maybe you are looking for