Weird glitch noise and driver issues

Hi, recently i bought a probook 450 g2 and i have the following problems:
1) I get an error code 28 and can't find the needed drivers to install
Here is what i see on my screen: PCI bus 0, device 31, function 6
Also i got 3 unknown devices
2) The second issue is I keep hearing some glitching noise from time to time when i watch videos or listen to music. I have read that this may be caused by the HP Support Assistant, but i didn't install it.
Any feedback would be appreciated.

Hi:
You need these drivers...
ACPI\HPQ6007:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_132986_1&swEnvOid=405...
USB\VID_138A&PID_003F:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_134806_1&swEnvOid=405...
ACPI\INT33A0:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_143428_1&swEnvOid=405...

Similar Messages

My computer is making a weird beeping noise and the screen is black. What should I do?

My computer is making this weird beeping noise and the screen is black. What should I do?

http://support.apple.com/kb/HT5860

Printing Banners and Driver Issues

I have recently updated some family tree stuff and wanted to print this off on a multi page banner. I have 2 HP printers a Photosmart 5520 and a P1102W laser printer and neither appear to give the option to print a multipage banner.
After a search it was suggested by someone that the driver for the Deskjet 6980 would work on the 5520 however I cant find it to downoad anywhere.
I have a macbook running osx 10.8 and all the option say to upgrade drivers via the software update feature but given I dont currently have a deskjet 6980 then I cant get the upgrade (even the HP site for the driver doesnt seem to have a driver to download)
Is there a way to get an updated software for any of the printers I have that would let me print a banner or get a compatible driver that will?
Seems a bit weird that the printer I had 15 years ago let me print banners but these new ones won't
Anyway, I hope someone can help
Best reagrds
Scott
This question was solved.
View Solution.

Hello scm256. I understand you are having banner printing and driver upgrade issues.
In terms of banner printing, only our higher-end printers are almost guaranteed to possess that capability. I will post the specifications of both the printers, so you can review the supported paper sizes and types:
Photosmart 5520: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5157533&spf...
Laserjet P1102W: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01999607
In terms of updating the drivers, you are probably experiencing that the printers you own do not possess any driver updates at this time, especially an older printer like the Deskjet 6980. Also, there likely will not be a driver update for banner printing, for any printers that do not originally support it.
Please let me know if you have any other questions or concerns. I'm only here to help!
Mario
I worked on behalf of HP.

Display and driver issues with Windows 7 on i5 MBP

Hello-
I just purchased one of the i5 Macbook Pros, and set out to get Windows 7 working through boot camp. I did this on an older model (32-bit) previously with no problems.
This time around, installation of Windows worked fine, but I have had some trouble getting all the drivers working. The setup.exe program on the OS X DVD didn't want to run at all, I had to do a workaround from the command line that I found on a forum (otherwise I just got a response of "Bootcamp x64 is unsupported on this computer model").
Eventually I got (at least some of) the drivers to work, but there are still some issues.
After installing the drivers, things like brightness and two-finger clicking started working. A number of other things still aren't, though:
- Display: My machine has a 1440x900 screen. But for some reason Windows refuses to go higher than 1280x800.
- Network: No wireless at all. Windows doesn't detect any wireless capability, and only gets on-line via ethernet.
There may be other issues, but these are the big ones. Can anyone provide suggestions on what to do to get everything working?
Thanks!

I just used winclone to move my Win 7 from my Core2Duo MPB to an i5 MBP and had to do a few updates and have eneded up in pretty much the same place as you. I won't bother installing from scratch. I'm guessing we just need to wait for some bootcamp updates for these new machines.
For those of you who are looking to migrate your bootcamp partition over, winclone made it easy - I followed the directions for resizing and Win7 boots, does a disk check, then installed many of the new drivers automatically. There are some drivers that are still needed however, wifi and video. I also so a USB driver issue but have to look at that a little closer before I comment.
Best of luck,
Simon

Aperture Noise and processing issues

So I've finally got down to processing the same Raw file of a Canon 1Ds and exporting it from Aperture as a .psd. I've taken the same raw processed in PhotoshopCS2 and saved as a .tif.
The shot is over a creek just after a snow. Gray water and trees covered with snow. I have to say, there is such an obvious inferior difference with Aperture full of color noise, color moire, even the image definition is worse. The photosho image is soooo much better that I must be doing something wrong, but I've been preparing images for prepress now for many years. The noise in the water is unacceptable. I could not turn this image in. I will have to do some other tests, but this really surprises me.

I saw this post in another thread as well, and trust me I am not trying to get an argument started. I only want information. I read reviews for all sorts of gear and sw, and sometimes I never see the same issues everyone else is seeing due to my experience or knowledge. So, I went to the ARS site, downloaded each set of files that was shot with the Nikon (not Canon since I don't own a Canon) and reviewed them to see if I could see the issues.
Cat Photo
The Capture One image seems to have the least noise. Just at first glance, it seems to be the most appealing. It is softer, but less noisy than either ACR or Aperture.
Aperture and ACR seem to have equal noise, although the Aperture noise is different, seeming to have a bit of color (green) to it. But they seem close to me.
the Aperture image seems harsh in that is has edge enhancement or too much sharpening.
Football Image
Again, the C1 image has the least noise and looks the "best" to me. There is still a great deal of noise in the black sky, but less than either of the other two.
Once again, the Aperture image, if zoomed into the QBs head, has noise that has green color to it.
Looking at ACR and Aperture side by side, ACR looks better to me, but it seems to be a color issue as well, so some of that might be correctable.
Dog Image
To be perfectly honest, I saw no real differences in these images.
So the post said they were much worse, and from what I see, I don't see the dramatic differences that everyone is talking about. I see almost as much difference between C1 and ACR as the others.
I am not looking to get flamed, but I would like to know what others are considering dramtic flaws so I can get a better idea of what I am not seeing. I am not saying that is not the case, only that my less expereiced eye doesn't see it.
I am not a pro photographer, so I probably am missing something. But since there is a site that has some images we can all use for comparison, why not some objective talk about those images? It is easy to post "My images look horrible with Aperture but great with ACR" but lets use these images to point out to the lesser of us exactly what we are talking about.
And really, lets try to avoid 300% crops to prove the point.
Chris

My Ipod is making weird clicking noises and telling me to contact apple support. what is going on and can I fix it?

So it started out not being about to conect to my computer then, when i changed to usb port, it went to disk mode. when i reset it it started to make odd metalic clicking noises and telling me to contact apple support. I'm freaking out cause i don't know what happened in I think its broken (its also my brothers ). I feel like i have tried everything but don't want to touch it anymore incase it breaks completely!! anybody know whats wrong with it? or possible how I can fix it?

Contact Apple iTunes Support Center as directed in the message.

MZen Micro Software and Driver Issue

I'm operating with the following and have not been able to link to Creative site or computer for several years, just able to play existing songs.
- Zen Micro V.0.03
- Vista 6.0 Build 6002 Service Pack 2? 32 bit
- Windows Media Player .0.6002.83
If anyone can help me with which drivers and SW that I need to upgrade to it would be appreciate. I fear I may have to upgrade initially on an XP system and then again on Vista. If someone can help me with this it would be greatly appreciated.
Jim

(Re: MZen Micro Software and Driver IssuesHere's what is stated in the firmware details. ?
IMPORTANT:
Be sure to back up all the audio and data files on your Zen Micro before installing this firmware update as all content will be lost when you install the new firmware. After installing the firmware, use Windows Media? Player 0 to restore audio and/or data files to your player.<
This firmware will currently ONLY work on Windows XP or Windows XP Professional x64.<
Installation of this firmware may take up to 5 minutes, and your device may reboot a number of times during installation.<
Software updates are required if you want to use any currently installed applications like Creative MediaSource?, Zen Media Explorer, or other track management tools with your player.<

COmputer makes weird pixelated noises and lags graphics

i just got an HP 15. It lookied good, had a light weight and had the best in gaming. But after a few days, when a game or movie goes on, this weird sound buzz and graphical lag comes on and relly anooys me. Plus, it gives me a feeling that the hardware is not assembled but i can't say because, till now, I have used every single HP computer since 8 years.
Please someone help me with this problem.
Intel fixer

Same problem, man. I would try everything, but it will perist. Try opening up the system and check for cracks in the motherboard or open spaces between the parts. It is hard to solve such problem for me.

Fan issue making noise and heating issue

Hi,
My laptop fan is making noise like a car engine.Earliar i did nott realize it but since winters are here i can hear it clearly coz ciealing fan is not under use now.Also my laptop is quite heated below.I have read that dust can accumulate in vents but i cant see any.Also my previous laptop got killed becoz of this same issue.Hp should do something about it.Can a layman like me open the dv-4 version and clean the fan? It is out of warranty now and i dont want to spend on shop.But i saw a video HP laptops are complicated to open....and close.Watevr other advice u r most welcome to give regarding yhis issue.
thanks

HP notebooks tend to run hot & thermal control is minimal effort in design & materials.
You can try clening with compressed air or a hoover perhaps but if looks clean & air sems to be flowing I expect it not the main issue.
You may also want to check running processes & CPU use as issues here & viruses can causes CPU load thus heat.
Also review notebook placed so vents are not blocked/restricted.
Use software such as HWinfo to review the actual temps of CPU GPU etc as helps see how much of an issue you really have.
HP laptops can be improved with thermal shims, ceramique paste, housing vent modifications & in extreme cases secondary case venting 25>30mm fan.
Not easy to do without some experience.
Like my post? Click Kudos (thumb+) to show appreciation.

Formating to Win7 VECD and driver issues

I have recently formated my booklet 3g to win7 vecd for enterprise issues.
After reinstalling all the drivers I've found that just the 3G option modem usb driver doesn't installs correctly, the driver listed from the nokia->support webpage.
Eitherway, in the option webpage, with my IMEI i cannot find the method to download the globetrotter connect 3.1 since it is a "secured" file. I have also tried to download the software that my mobile provider gives to me, but it doesn't work neither. Also tried to install the driver from the option webpage for the option 382E embedded device, and still is not recogniced...
I have my sim inside the SIM slot... but in the device administrator from windows 7, its says that there is an "unknown device" under the USB tab.
I don't know what shall I do now in order to find a solution for this.
Thanks in advance for any possible solution
Regards
Solved!
Go to Solution.

Up to today, I've tried multiple choices in order to make this work.
Still find in the Device Adminsitrator: "unknown device", under the USB controllers. I expect this to be the 3G/GPS modem, but not sure, since is the only thing not working still on my laptop.
Ive tried using drivers version 5.1.32, 5.1.33 even a driver for 382 made for a laptop Acer Timeline, with no success...
Thing is I have tried also uninstalling the unknown device driver, and rebooting computer, but still comes back the same driver... this done with all the drivers downloaded so far.
Under the drivers folder for the "official nokia-option" set, appears some like:
GtGps.inf
gthsmdm.inf
gthsndis.inf
I've tried to installed them manually but then, the device gets stuck with no response. I'm starting to believe that maybe the usb modem is broken, or doesn't support the windows 7 enterprise edition. But that is pretty strange, since is a 32 bit edition, and all version are based on the same type of software... then starting to believe the first thing.
My booklet is branded with Spanish Movistar provider, and I have a Movistar SIM into the slot, so I should have no problems of SIM locks or anything like that (even it doesn't even recognice the modem).
This is kind of frustrating since is the only thing left for me to have the booklet working great

Strange noises and booting issues

Hi,
My MacBook froze up this afternoon and started making strange clicking noises that sounded like someone typing on a computer. Because all my applications were completely frozen, I went to reboot, but now it is stuck on the loading screen. Is this because I have a CD in the CD drive and it is trying to boot from that? If so how do I get it out?

Sounds like your hard drive may have failed. Try booting from the Mac OS X installation DVD that came with your system (hold down keyboard "c" key during startup), then run Disk Utility from the Utilities menu before actually beginning the OS X install process.
If you have a non-startup DVD stuck in the optical drive, just hold down the keyboard eject button during startup to eject it.

WoW Wireless Headphones Mic and Driver issue

I know a lot of people have issues with the mic sounding muffled to others. One thing i noticed is that the default sample rate is 16000 Hz (Tape Recorder Quality). Is this my only option becuase I feel that is my issue. My destop mic is set at 48000 (DVD Quality). I cant believe there is not a way to change this. I have updated the firmware but dont feel that did much at all.
The other thing I wanted to mention is the driver date. I downloaded it on the website where it says released March 23 2010, yet when I go into the actual driver its date is December 9 2009. Is it really that old.

Are your headphones showing up as the default playback device? I have an X-FI Titanium and the headphones connected and my Titanium is usually my default for my speakers. In Windows 7, I usually go to control panel and sound, and there I choose the WoW as default and this solves my issue.
Windows usually chooses the first device listed in control panel until you choose another default.

USB and Driver Issues

Hello!
I recently received a bunch of new devices for Christmas - a digital camera, MP3 player, etc., plus I just bought a BlackBerry this week.
The problem I'm having with all of these devices is my Compaq Presario CQ60 Laptop will not connect with these devices. It works fine with my mouse and my printer, but those are drivers I had installed right when I got the computer.
Although I installed the drivers using disks or website files for all of these other devices, when I plug them in the computer does not recognize them. It tries to install the driver then says pops up with the "device driver software was not successfully installed".
The devices themselves also act as if they are connected to the computer for about 1-2 seconds, then act as if they aren't. My Kodak camera won't even turn on if it's plugged to the computer. The BlackBerry turns itself on and off of charging mode but I manage to back it up when I run the software.
This happens with all 3 USB ports.
And under My Computer the devices don't show up if they are plugged in. Again, it works fine with things that worked with the computer before the problem started, which as far as I can tell was before the holidays.
Any advice? Thanks!

Thanks,
tcam22 wrote:
420US
This would be the first thing to consider as I have no knowlege of which, if any, service pack for Vista you have installed.
Have you gone to the support web page for your laptop and applied the Windows Essential updates that are recommended by HP? Here is a direct link to the HP web support document. There are hotfixes for numerous issues included in the updates which are specifically for your laptop.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

ATIx1900 and driver issue

hi everybody out there
i have a MAC Pro 8 core - 4 gb ram - ATIx1900
i'm running winzozz xp sp2 via bootcamp on my mac pro and i'm trying to playing some games :\
the windows installation through bootcamp was easy and winzozz it's working ok.
I installed Ghost Recon Advanced Warfighter 2 but the game doesn't start, it crash and return to windows while is loading give me this error:
Crash in application version: 30292.2673
Unhandled exception - access violation
C STACK:
DINPUT8: DirectInput8Create
graw2: ???
Renderer: threaded
Physics : threaded
Running the game hardware detector it says the video card drivers are too old (v. 6677); so i tryed to download some new drivers from ATI website but it didn't work and on the apple site the drivers are dated 2005 O.O ?.? -.-'
Is there any chance to update the video card drivers?
Am i doing something wrong?
Many thx in advance for your help

There are threads on x1900 and BootCamp, on display issues, and updating. Also over in the BootCamp Beta forum.
ATI's latest x1900 Catalyst driver looks to be May '06.
When was the game last updated?
Maybe it, and BootCamp 1.3, doesn't 'know' or properly recognize your logicboard, an 8-core system.
"It didn't work."
doesn't give a lot to go on. Did you uninstall and then restart and install? I know Nvidia has improved driver update process in the last two updates (monthly).
I am using Vista 64-bit so I don't even know if SP2 is up to what you need and run on your system.
AMD has Boot Camp only drivers
http://ati.amd.com/support/drivers/mac/bootcamp-xp.html
You could try the x1900 driver and Catalyst which are newer
http://ati.amd.com/support/drivers/xp/radeonx-xp.html
FWIW I use native Nvidia driver from July 26 on OEM 7300 GT in Vista.

Reinstall of Win XP Pro on T42 help = Device and Driver Issue

Hi All, need help. Recently I re-installed Win XPro on a T42 Type 2373 ThinkPad. Prior to doing a re-installed all devices were working(just 3 days ago). Wireless and Ethernet. After a clean installed the systems does not see ethernet or wireless device. I checked Device Manager and I get the famous "? Other Devices" for Ethernet Controller. I have installed all the driver listed on
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-55386
Still systems does not recognize device. Devices are ENABLED in the BIOS. Device Manager does not show Wireless device and Ethernet. I was able to install video, sound, & modem. So here I am stuck unable to connect to internet via LAN or Wireless. I am lost for words. Any help would be greatly appreciated.
Thanks

Solved: after downloading the driver I actually had to go to the location of the file and click on the SetUp and it worked.
After downloading and opening the exe file i assumed (and we know what that does) that was all i needed to do. It seems that also have to then open the folder that this file unpacked to and click on the setup file (which i didn't realise was there).
http://forum.thinkpads.com/viewtopic.php?t=66278

Weird glitch noise and driver issues

Similar Messages

Maybe you are looking for