Weird Logic behavior

Hello everybody,
here is the problem.
Let's say i have a song open and i want to overdub vocals,
i arm the first track, record a bit , stop,go back on the same track to do a punch in.
After a while, randomly, the track will NOT allow me to record ,in other words
the signal will not go thru and the rec red light of the track will not turn from "rec" to "punch".
Now i discovered that if software monitor is on everything is fine(also all is fine
if "punch on the fly" is disabled}, but i like to work
with direct monitoring...(software monitoring off)
This is on a G5 2x2,3g mem,Rme Fireface800,2x Uad1 cards.
OSX 10.4.8,Logic Pro 7.2.1
On my Macbook Pro all is good.
This happens with any song, small or large.
Here's what i have done so far with no success:
trashed prefs
rebuild autoload
try with built-in audio
reinstall logic( also tried 7.2,7.2.1,7.2.3)
pull components out of components folder
run DW,Cocktail, rebuild permissions.
The only work around that i found is to have all audio tracks on a bus( or different busses),
which i normally do, but i'd like to know if anybody else has experienced and maybe solved this.
Thanks
Carlo Pennisi

Did you uncheck "Universal Track Mode" in Preferences/Audio?
pancenter-

Similar Messages

IPhone 6 Plus weird screen behavior

I recently started noticing some erratic touch behavior on my screen, it's as if I have a possessed phone such as taps that I did not make, or swipes (up/down/left/right) as well. The spotlight randomly swipes down, or the notification center (it seems like a consistent swipe down behavior but at different locations). I couldn't swipe left yesterday to unlock my phone, and sometimes hangs and only locking/unlocking can fix the unresponsiveness.
Moreover, random tappings affect games and apps such as whatsapp, where it goes to the previous page due to a top left page tap, and then again on the edit button, then starts randomly scrolling up and down and tapping random parts of the screen.
This is quite frustrating, I tried formatting and starting the phone as a new one and only installed Whatsapp, but the problem persisted, albeit at fewer occurrences.
Now I noticed the problem again even though I'm on iOS 8.1, with only apps, music, and photos synced back from iTunes. What is happening ? How can I get this fixed ?
Summary
Issue :
Erratic touch behavior which cannot be produced on demand
Rare screen unresponsiveness following the weird touch behavior
What I've tried :
Reset and start phone as New
Reset all Settings
Hard Reset
Currently using a sketching app to see how the screen taps randomly (for proof as well).

Hello zazu90,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your touchscreen is behaving erradically on your iPhone, please follow the steps below.
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response - Apple Support
Take care,
Alex H.

Weird keyboard behavior in MacBook Pro 13'

Hi guys, I have a MacBook Pro that's starting to show a strange keyboard behavior.
The problem is that the keys: e r t y u i o (curiously all belong to the same row) sometimes get unresponsive.
It's very annoying of course and it happened about 4 months after upgraded to Lion.
The geneal perfomance of the laptop was deteriorated and I've read that a clean install of Lion might help so I've did it thinking that it will also fix any OS weirdness about the keys too.
The machine works way better after the clean Lion install but the problem of those same keys persist.
What I did next was to reset the PRAM thinking it might be interference from some weird state there. But after the reset the problem persisted.
Curiously, I've figured out that when, for example the i key gets unresponsive, if I press AND hold the e key then the i key works totally fine (think of typing an "I" but using e instead of shift).
If, when pressing the unresponsive keys, I use different angles or quantity of force in the pressure of the keys or cornes of the key the behavior stays the same. The only thing that seems to affect is holding the e key down before pressing it. Every time it gets weird I do it and it kind of get normal for a while.
Also, sometimes, keeping some seconds the unresponsive key ends up getting responsive again (but not always).
This mac has about two years now and it's very well preserved.
Do this happen to anyone? ideas?
Is there some other thing than PRAM I could reset to see if it gets normal again?

You are making me dig into nightmare-ish memories here.
Ok, I'll share.
This is how turned out:
Needed to send my MBP to another town with an Apple authorized service provider and asked to change the keyboard for a new one.
It was ~20 days waiting until they got the new keyboard part from Apple and about ~3 more to get it fixed and ~2 more to get it again in town.
I received it very well packaged and all was fine after that but the whole thing was very expensive, ~40% of the price I paid for the whole MPB in the first place plus all that time without being able to use it.

Weird Battery Behavior in 7.1.1

Has anyone else noticed weird behavior after upgrading to 7.1.1 - on my 5s its not that the battery is draining quickly - in fact its showin 5 hours 40 minutes usage with 75% remaining - which i find hard to believe
whats weird is standby time equals the usage time but i have turnd off and aback on the iPhone - I even did a hard reset - i have a monitor program which is showing the cpu as mostly idling at 90% or more ( although the monitor probably doesnt know about the M7 chip - it probably doesnt even know about the A7 chip too)
The battery percentage is not going down quickly - it seems to be thr same rate as with 7.1 but i dont believe these numbers
Im going to let the battery drain completely and do a battery calibration - that some times helps after IOS upgrades
But i was wondering if anyone else was seeing this and had any suggestions

Grant Hiesterman wrote:
Out of curiousity, how were the issues fixed/resolved other the past? With IOS updates? Other?
The problem has always been an errant app that got stuck in a loop. It can happen any time, but is more likely to happen right after an update. My hypothesis is that the update process suspends running apps, and sometimes after the update they "lose their place" and spin their wheels trying to find it. (It's easier to say it that way then to talk about race conditions.) What will frequently fix it is to run the battery all the way down until the phone shuts off. This terminates all processes, even those that cannot be killed from the Quick Launch screen.
You can also try to find the app; if it's email turning off any Push email accounts, rebooting, and turning them back on will frequently fix it. If it's a 3rd party app killing all apps in the Quick Launch will frequently fix it.
Sometimes just turning off the phone for a few minutes will fix it.
Restoring the phone as new will usually fix it, but restoring from backup may not, because the app state may be preserved in the backup.
It really just a matter of trying things like these one at a time. One of them will work.
Do you or Trevor have a CPU monitoring app you believe is a quality application?
I've tried several, and haven't found any that I like. I like Trevor's answer.

Not a real problem anymore, but a weird Apache behavior wrt .php files

Hello everyone. Yesterday I was trying to set up an ordinary LAMP server in my VPS, running Arch (first time ever touching apache). After all was said and done, and apache and PHP were correctly configured following the Arch Wiki, I tried to get some things like phpmyadmin and ampache running, but I found out that my browser was asking me to download either a login.php file or an index.php file (to be more specific: I added a test.php file in /srv/http and that was interpreted correctly and I could see all the information as intented; if i pointed my browser to /phpmyadmin or /ampache though I would see the first page but after trying to, for example, logging in with phpmyadmin I'd get the download prompt). I googled around and yes, everything was configured as it should have, I had the AddHandler directive in the apache conf file and all that jazz. This morning, I log in, I start apache (since it wasn't working I figured that I might as well shut it down for the night and yes, while testing and setting up things yesterday I restarted the daemon every time) and everything works as it should: ampache lets me create my configuration, phpmyadmin lets me see my DBs and everything works. So, the problem apparently fixed itself, or at least the weird behavior I was witnessing is no more. Is there any specific reason for this? I wouldn't want to start from scratch (and I probably will, since I like to mess up a lot, that's how i learn!) to perhaps find myself in this spot again and not know what to do!
Last edited by mrz87 (2011-05-11 09:12:21)

This was a problem with apache-2.2.17-2. Don't worry, it's fixed for good.
https://bugs.archlinux.org/task/24208

Weird keyboard behavior PS CS3

Hi all,
Every now and then it seems like my keyboard has gone nuts.
This always happens inside PS CS3. After doing some actions, especially when doing a 'Shift-Alt-Arrow key' action (duplicating a layer or group and moving), it looks as if the keyboard goes in some sort of 'Alt-Always-On' modus.
The annoying thing about this is, that regular keyboard-shortcuts for selecting a tool don't work (pressing 't' for the type tool does nothing) but far worse is the fact when you want to move a layer or group of layers they get unwantedly duplicated.
Sometimes this behavior seems to disappear, when I click around my desktop (outside of Photoshop), but sometimes it doesn't disappear. The only thing left to get rid of it is to quit and relaunch PS.
Does anyone else have this problem, and how can it be solved.
This weird keyboard thing does only appear in PS, every other application is not affected by it.
I'm running PS CS3 on Windows XP SP3
I have all updates of PS CS3 installed

Zeno,
I feel so stupid, but that also crossed my mind.
And to be honest, I think that is really the reason.
Why didn't I think of that before...

Weirdest Logic behavior (Deleting tracks will eat up RAM)

Hi,
I've been a Logic 9 user for quite a few years (4-5yrs at the least) and have never experienced anything like this.
I'm currently working on a film project which requires using at least 25-30 Kontakt loaded tracks. My computer, 2.6Ghz i7 16gb Ram running on 10.7.5, has been handling this ram/cpu eating project fairly well for the past few weeks. I've been very careful while working and I'd purge any unused samples loaded on Kontakt. Usually I'd have at least about half of my RAM unused (6-7GB). Even in an intense action scene my computer was rarely frozen.
Now, I'm done with my sequencing and for the past few days I've been spending my days exporting/ bouncing in place my tracks so that I could mix them once they are converted to audio tracks. Once I'm done converting midi to audio tracks I always pack them into the folder and delete the rest of midi tracks.
THE WEIRDEST EVENT OCCURS WHEN I'M DELETING MY TRACKS, LOGIC WILL EAT UP MY RAM LIKE MY SISTER EATING A CHOCOLATE. Deleting a single track would consume AT LEAST 1gb of memory loss. After deleting 5-6 tracks my activity monitor shows that my computer only has about 4-6mb of ram left. By then, my logic session is nearly frozen and I have to run my memory cleaner app to free up my ram space.
This is perhap the most bizzard logic phenomenon that's ever occured and I'm very puzzled at this moment. I guess the best solution at this point for me is to reinstall logic 9 but at least I'd like to hear opnions from Logic gurus out there. Any input would be greatly appreciated. Thanks!

It doesn't jump for me however I'd thought I put my 2 cents in and ask if anyone else gets this behavior:
I'm in a similar situation. I want to 'clean up' the session. I have a bunch of xtra tracks I didn't use or multiple instances of the same track, from 'mute and create new track' feature. As I start to delete the extra tracks, when I get to the 3 - 6th track, Logic will re-initialize the audio core driver. All virtual instruments will 'blank' out, and it will take anywhere from 8 - 20 seconds for Logic to 'boot' them all again. It was acting very bad a month or two ago, it would re-initialize after 3 deletes. Lately, It's more like if I delete 8 or more tracks. (I usually don't have that many to delete) This is not consistant, it DOESN'T always happen.
Is anyone else experiencing this?

Weird compression behavior

I have been trying to compress some animation material for DVD. It is mostly flat colors with black outlines. The past few weeks I've been having trouble exporting to compressor via Final Cut (the connect to background process bug) and so I have been using reference movies loaded into Compressor standalone.
I am seeing weird behavior, though. When I compress the reference movie, the frames look fine although every now and then there are artifacts, pieces of the image that break down. I think of them as compression errors, and I suspected that the compression markers at the beginning of each clip were not being exported in the reference movie.
So I tried a few things and finally got Final Cut to connect to compressor directly. This worked in that the compression errors I was seeing are gone--HOWEVER, the overall quality of the encode has decreased markedly! The black lines around shapes are all jagged, and the whole image looks inferior to the one compressed in Compressor standalone.
The thing is, both of these were compressed using the exact same preset! Does anyone know what the deal is? I would like to get the image quality from the standalone Compressor encode, but without the artifacts.
Thanks for any advice,
Bob

Your mileage may vary with Compressor 2. Some like it, some don't.
As for your original question, I've never seen unexplained changes like what you describe in a preset's behavior with FCP HD and/or Compressor 1.2.1.
As for the "unable to connect to background process" problem I've seen that once in just over one year of use with Compressor and Final Cut. On this one occasion I just manually relaunched QMaster and everything was fine from then on.

Strange stacks icons and weird dock behavior

I got leopard for Christmas and on the first day of the install my icons on the right side of the dock- i guess the stacks for applications and downloads icons look weird. It's not a combination of all the icons in the stack like someone else wrote, it is a weird green, white, red rectangular shaped image with weird black and grey squiggles going through the middle. Also-I'm not sure how to describe it but what used to be a clear line I guess to separate the stacks stuff with the other icons on my dock it's next to about this mac icon on my dock has turned into a weird pink rectangle with a really small picture of the weird red, green, and white rectangle on top. Any help would be greatly appreciated. My husband is a windows guy and after me bragging about how much better mac is, I don't want him to know that I'm already having problems with leopard

No, this is not "normal behavior." The problem is that it is not consistent, either, so it is hard to tell what is going on. It may happen after using some full screen programs, but I am not sure. I am not able to reproduce the issue, myself. It just happens from time to time.
The icons are not changing after they are used. The ones in the download folder will usually have their normal appearance, the dmg file or a pdf file with its "preview" icon or whatever. Then, for some reason, I will notice some of the icons have become blocky and pixilated, not resembling anything, usually almost a solid color.
Again, the way to get them to change back is to remove the downloads folder from the doc and return it. Then all the icons return to their normal view.

Weird application behavior - solution

I recently had a major series of disk meltdowns. I suspect part of the problem may have been caused by letting my startup disk get too full and working with very large photoshop files (with photoshop using the startup disk as a scratch disk). Anyway, I managed to restore a clone of my startup drive, update all apps, and get back to work. I've cloned the startup drive to my second internal drive and intend to religiously update the clone whenever I update any applications (we'll see if I return to agnoticism). Anyway, several applications had weird behavior. Cleaner would succesfully compress one file and then quit. I could then restart cleaner and the batch list had successfully updated but again, just one compression and then a quit. DiskWarrior would successfully rebuild a drive directory but then quit without any notice. Today, I restarted from my cloned startup drive and ran diskwarrior on my main startup drive. Problem solved. Figured a few people out there might benefit from my experience.

Michael,
Often, the Quits are caused by a corrupt Property List file. When a number of apps have the Quits, that's another story. Back in v10.2, that was often caused by a hidden user prefs file
(~/Library/Preferences/.GlobalPreferences.plist) where ~ is your user Home folder. You could try deleting it in Terminal, but I haven't heard of this causing these problems since Jaguar.
Maybe you could try creating a new user Account, log into the new Account and see if things improve. At least that would prove whether the cause has something to do with user prefs, including that hidden global prefs file.
I'm thinking it's a hardware problem, though.
EDIT: FWIW, here is the step-by-step for deleting that global prefs file and replacing it with a fresh copy:
1) Log in as an Administrator.
2) Create a new user account, called NewUser.
[The name isn't important, because you're going to delete this account when we're done].
2b) If the affected user account is not an administrator account, go ahead and make it one. You can revoke this privilege later, but it will make things easier for now.
3) Log out, and log back in as NewUser.
[This will initialize the account and create undamaged preferences.]
4) Log back out, and log in again as the user affected by the crashed (who, according to step 2b, is an Administrator).
5) Launch the "Terminal" application, located in /Applications/Utilities/
6) Type the following command (for all of the following, copy and paste):
cd ~/Library/Preferences/
7) Type this command:
rm .GlobalPreferences.plist
8) Type this command:
sudo cp /Users/NewUser/Library/Preferences/.GlobalPreferences.plist .
[it will ask for an administrator password to allow you to log in as root for this action]
9) Type this command -- DON'T COPY-PASTE THIS ONE! YOU NEED TO PUT YOUR OWN USERNAME:
sudo chown USERNAME .GlobalPreferences.plist
10) Log out.
10b) If you enabled Admin access on an account that shouldn't have it, log back in as an Administrator and disable that Admin access.
11) Delete the NewUser account.
12) Log out, and log in to the affected acount.
There will be some System Preferences you'll need to reset afterwards.

Weird textinput behavior embedded font

I have this weird behavior with an embedded font in a textinput.
I have embedded the myriad font and aplied it on a textinput.
In this weird scenrio when i type "test configuration" in the textinput and then pres the left arrow key the cursors will not go further back than the letter n in the word configuration.
This behavior is only with some font types, like myriad or ubuntu.
Since i have no clue how to upload attachments to this forum i created a Box link
https://www.box.com/s/0boj6u2kgmwojbg9ubhd
In here i have a video of the behavior and a test project.

Not sure if this will help you, but in order to get my embedded fonts to render, I had to do:
                GlobalSettings.resolveFontLookupFunction = null;
                //setup text item from xml
                var res:XML = XML(xml.htmlText.children()[0]);
                var tf:TextFlow = TextFlowUtil.importFromXML(res,WhiteSpaceCollapse.PRESERVE);
                tf.renderingMode = RenderingMode.CFF;
                tf.fontLookup = FontLookup.EMBEDDED_CFF;
                txt.textFlow = tf;
                txt.textFlow.whiteSpaceCollapse = WhiteSpaceCollapse.PRESERVE;
                txt.textFlow.invalidateAllFormats();
The important lines ar the first and last.

Weird window behavior after 10.10.3

I have an interesting issue with 10.10.3 finder window within Column view. In Illustrator and only Illustrator, when I go to Open or Place a file my finder window looks like this:
Look to the far right, I can’t view the files within the folder. And the grey scroll bar abruptly ends. I can't go any farther to view items in folder. I can resize columns but I have to do every time. To add to the weirdness, it is just the Open command this happens. If I do a Save As, it looks like this:
And I can view the files.
I have trashed Finder window prefs and Illustrator prefs and no luck.
Any thoughts???

I've got exactly the same issue with Illustrator CS6. Have tried updating Java with no luck. I'm also getting the same thing in the 'scroll view' (or whatever it's called) finder. Photoshop isn't affected. This only happened after I upgraded to 10.10.3. What I do know is that it's annoying

Lion produces weird trackpad behavior in Angry Birds

I upgraded to Lion this week. I know there are all sorts of new trackpad features, but the probem is that it messes up a lot in Angry Birds. For example, the various finger-swipes have unpredictable results; instead of resetting the screen, it might activate launchpad. Or it might jump you back to the "play" splash screen. The pinch and expand gestures might randomly activate mission control instead of zooming the way it did in pre-Lion Angry birds. And quite often, I'm finding that the trackpad stops responding at all! No matter what gesture I use, the bird sits there in the slingshot, unmoved, unless I restart the app. It's weird.
I've adjusted the trackpad settings in Settings as much as possible to accommodate gameplay, but AB still responds unusually to gestures, without regard to either the specified setting or to its pre-Lion performance. It seems like Apple put way too many features into every slight gesture on a trackpad, so it's become LESS intuitive because gameplay gestures trigger spontaneous resets and screen modifications instead of, well, game interaction.

Works for me and thanks i just try to see because i didn't play in Lion and the level that i was stuck in i pass it in the first try so thank you it works for me.But is true playing that game you can't do much gestures same thing happening before lion,just open it play it and close it.

Very weird forum behavior . . . in Safari

Is anyone else seeing disappearing posts, shortened threads, and missing replies? I've replied to several posts in the last two days. Most of the replies are now missing. Even replies by others. One posts on PAR and CS3 at one time showed 3 replies, now it only shows one, but when I open the thread only the original question is showing.
Maybe it's my browser? Mac OSX 10.6.7, Safari 5.05
The forum seems to behave normally in Firefox and Chrome.

Nope. It's not your browser. Happens to me all the time recently using Firefox and Chrome on PC - I post, the reply appears, I come back a few hours later and everything is gone. Sometimes deleting your local browser cookies will fix it, sometimes it's a permanent issue. I suspect it's an issue with the timestamps which are set to a time before the original post even was written, hence the logic of the forum software never makes them appear afterwards. In the past I also had similar issues with timezone offsets where my posts would reappear 2 days later. Go figure. Well, I'll be away for a while maybe they can fix it while I'm in the hospital...
Mylenium

Weird scroll behavior in Folder with actions attached

My downloads folder has an action that is performed when files are added. Now when scrolling down the contents within List mode, it will randomly jump back to whatever file I have selected. Is this expected behavior with folders that have actions attached? Anyway around it?

OS Lucinity wrote:
Wow, you're right! When I delete the .DS_Store file it scrolls properly, until the time when it again adds the .DS_Store file. I'm guessing that the action is corrupting the .DS_Store file.
for f in "$@"
do
touch "$f"
done
it really shouldn't be doing this if you are running this command on added files only. by I guess when the system updates the .DS_store file in this folder it first deletes the current one and only then writes out the new one. I know that's how it works with the plists. then it would probably run this command on .DS_store and that can easily cause the behavior you are seeing. you might try modifying the the folder action to ignore the .DS_store file. that will look like this
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
for f in ~/Desktop/3/*
do
if [ $(basename "$f") != .DS_Store ]
then
echo $f
fi
done</pre>
I found this app to remove folder actions. Wierd that I don't see a Folder Actions tab in my Finder contextual menu
it's there in the services submenu.
/System/Library/CoreServices/Folder Actions Setup.app
Message was edited by: V.K.

Weird Logic behavior

Similar Messages

Maybe you are looking for