Weird .Mac sync error -- cannot reset calenders and sync broken

When I try to sync my desktop I get the following error:
[ISyncConcreteSession pushChange:]: you can't modify a record that doesn't exist: <ISyncChange 0x3c5d5f0>{ modify record id '8C584579-8929-46A8-AE28-345C91E131DD'
set title = Unfiled
set com.apple.ical.type = local }
I have no idea what this means.
Moreover, I cannot sync the calendars on my machine with .Mac. I have tried resetting them with .Mac but this does not work, either. It generates the above error message.
Any ideas here? Since resetting does not work, is there any way that I can throw out all of the calendar information on my desktop and start fresh from .Mac? I know that .Mac is up to date since I since my laptop and Treo to it.
Thanks,
mh

You do not have to toss everything and start again: the Unfiled calendar resides on your machine to support the synchronization of a Palm device.
If you don't synchronize a Palm device, simply highlight that calendar and press the delete key. If you do, consider moving all of the Palm-created events and tasks in it to one or the other of the several other calendars in iCal.
Or, if you are using Mac OS X 10.4.3 or later and synchronize with a Palm device, ditch iSync and the iSync Palm Conduit and use the Missing Sync for Palm OS instead:
http://www.markspace.com/missingsync_palmos.php
It's helpful to those of us who regularly post here to have you describe your configuration as completely as possible on your specific My Settings page, and supplement that when necessary with additional descriptive language.

Similar Messages

My photos are not working, any recently taken photos won't show, they're just like blank grey pictures & all my photos cannot be uploaded or loaded into an editing tap, it says error, cannot find photo, and the last photo I take ends up being repeated!

someone please help me! I just traveled to hong long and the minute I arrived something wrong was happening with my photos, I can't take any new photos because if I did they either get repeated or just be shown as grey pictures and when I try to upload one to a photo editing app it says "error cannot Load photo" and the same happens in twitter and Facebook! this has been found on for Like more than a week now, even when I want to set a picture as my profile picture in man it ends up zooming the picture way more than how I chose it in the border,, I would like to be able to take good photos again, any help?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

My BB Flip 8220 giving App Error 523 Reset suddenly and not starting

Hello,
I am using BB 8220 Flip with IDEA Service Provided (since I am based in India - Pune). Suddenly, I got the white screen with message App Error 523 (Reset). I searched in the forum for the same and suggested to upgrade my OS as seems its OS is corrupted. But when i search for service provider to download the application, the OS version for 8220 is not available under Asia Pacific -> IDEA listing. Please help me out for the same or let me know if any other service provider download link for 8220 will work or not. Also, please provide me procedure to upgrade my OS. Thank you.

You can use the operating system from another service provider. Follow the instructions below.
https://www.blackberry.com/Downloads/entry.do?code=4DD9CEC1C21BC54EECB53786A2C5FA09
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Activation - Error:Cannot store binary and a few other NWDI questions.

Hi all!
I'm working on the Internet Sales Application (crm/b2b) in CRM 6.0. The work i do is an upgrade from CRM 4 to CRM 6, so I'm new to NWDI.
I'm following the "ISA50DevExtGuideConcepts21.pdf" (since I haven't found a document for version 6), and have managed to add java extensions and librares successfully. I now work on the web-project and have started an activity to merge changes to stylesheets, and also added own mimes like stylesheets and images (.jpg, .gif). The files where added to the project folder (webContent in crm/isa/web/b2b) and then located and added to DTR through a refresh in NWDS. When I try to activate this activity I get the post-proccesing error in the request log below. This might have been caused by an image file renamed to .bak, although its recoginzed as an image in NWDS.
Questions:
1. Any idea what goes wrong? How should I solve this?
2. Can I check out or remove the activity to correct the problem? How?
3. I have a few Activities,already activated on the development server that I would like to get rid of. How do I do that?
4. I have a few Activities that aren't properly named. Is it possible to change the name after activation?
/Anders
CBS Request Log
    ===== Processing ===== started at 2009-04-08 15:53:19.110 GMT
        BUILD DCs
            'sap.com/crm/isa/web/b2b' in variant 'default'
                    'war' PP has been changed. Dependent DCs will be re-built.
                The build was SUCCESSFUL. Archives have been created.
    ===== Processing ===== finished at 2009-04-08 15:54:15.958 GMT and took 56 s 848 ms
    ===== Post-Processing =====
    Waiting for access: 10 ms
    ===== Post-Processing ===== started at 2009-04-08 15:54:15.968 GMT
        Check whether build was successful for all required variants...
            "sap.com/crm/isa/web/b2b" in variant "default"   OK
        STORE activation build results... started at 2009-04-08 15:54:15.972 GMT
            Update DC metadata... started at 2009-04-08 15:54:15.972 GMT
                'sap.com/crm/isa/web/b2b' DC is CHANGED
            Update DC metadata... finished at 2009-04-08 15:54:16.276 GMT and took 304 ms
            STORE build results... started at 2009-04-08 15:54:16.276 GMT
            ===== Post-Processing ===== finished at 2009-04-08 15:54:17.849 GMT and took 1 s 881 ms
            Change request state from PROCESSING to FAILED
            Error! The following problem(s) occurred during request processing:
            Error! The following error occurred during request processing:Database Error:Cannot store binary.
     Original Cause: DB2 SQL Error: SQLCODE=-968, SQLSTATE=57011, SQLERRMC=null, DRIVER=3.50.153
        REQUEST PROCESSING finished at 2009-04-08 15:54:17.855 GMT and took 1 m 6 s 42 ms

I have done some more testing regarding the case with "Database Error:Cannot store binary."
Unfortunately, the behaviour doesn't seem to be consitent or related to particular files. I had a successful activation with 79 of the files in one folder, but could'n add one single file in a new activity. When i removed one of the 79 files and added another file, one of those not possible to add before, it was successful.
After this I tried to remove all 79 files again i one activity, and the add the original 79 files in another. The remove was successful while the adding was unsuccessful. All with the same error message in Request log.
Does anybody have an idea of what is happening here? I don't have a clue.
/Anders

Trying to sync Sharepoint calendar w/ Outlook for mac; Protocol Error; Used about:config and get same error.

I'm trying to sync a Sharepoint calendar with Outlook on my mac. When I click on "Connect to Client", I get this error:
Firefox doesn't know how to open this address, because the protocol (stssync) isn't associated with any program.
I used the about:config instructions to create a new string:
* Type about:config into the address bar and press Enter.
* Right-click -> New -> Boolean -> Name: network.protocol-handler.external.foo -> Value -> true (Replacing foo with the protocol you're specifying)
* Right-click -> New -> String -> Name: network.protocol-handler.app.foo -> Value -> /path/to/app (Replacing foo with the protocol you're specifying and /path/to/app with the path to the application you want to run.
* Ensure network.protocol-handler.expose-all is set to true.
The path I used (which opens Outlook if I click on the icon) is:
/Applications/Microsoft Office 2011/Microsoft Outlook.app
I'm still getting the same error message.
Please help me to allow Firefox to open stssync pages so that I can sync my calendars.
Thank you in advance.

Straight from the Mothership:
http://www.officeformac.com/ms/ProductForums/Office/6960
NO SHAREPOINT INTEGRATION!
To be considered a true business software, wouldn't this be a nice feature? Oh yeah, I left feedback and hope many others will as well.
On 11/12/10 9:19 AM, [email protected] wrote:
> How do I view SharePoint contacts in Outlook 2011? In windows the
> "Connect to Outlook" button is highlighted, however on a Mac it is
> greyed out and I can see no way to add them from Outlook.
''Currently, Outlook for Mac has no SharePoint integration.''
Please be sure to let Microsoft know you'd like to see this feature in
future versions by using the Help --> Send Feedback mechanism in any
Office application.
Hope this helps!

Is it possible to sync my iphone4, macbook pro, and my mac desktop? Specifically itunes, calenders, and apps.

I would like to be able to sync all my devices. Specifically, calender, music, and apps? POssible?

Yes, it is possible.

Mac disk error with Halo Universal and QT7.2

This is not a question, but a means of posting a problem for Apple and others to see:
1) Halo Universal (original and 2.0.2 upgrade) will always create a "volume header error" on my hard drive whenever a checkpoint is reach. This error is found with Disk Utility. The game may be OK for quite a while before actually crashing (unable to load saved game - must start all over).
I use Apple's Disk Utility on the install CD to repair the error.
2) The original Halo, Combat Evolved, for PPC, upgraded to 1.5.2 works without causing a "volume header error".
The following answer was sent back to me from [email protected]:
This problem has been reported by a number of other users, and we've reproduced it here on our machines. We are 99% sure that Quicktime 7.2 is causing these problems. Unfortunately, the only advice I can give you at the moment would be to try and reinstall Quicktime 7.1.6 to see if this solves your problem.
Here are instructions for rolling back to 7.1.6:
*Force installation of QuickTime 7.1.6*
1. Download _QuickTime 7.1.6_
http://www.apple.com/support/downloads/quicktime716formac.html
but do not attempt to install
2. Download and launch Pacifist
http://www.versiontracker.com/dyn/moreinfo/macosx/12743
3. In Pacifist, click the "Open Package" button, then locate and open
the QuickTime 7.1.6 .pkg file.
4. Click the lock and enter your administrator password, then click
the "Install" button.]
5. Download and install the _Mac OS X 10.4.10 combo updater_
http://wsidecar.apple.com/cgi-bin/nph-reg3rdpty2.pl/product=14214&cat=1&platform =osx&method=sa/MacOSXUpdCombo10.4.10Intel.dmg
Please follow these directions carefully, as not doing things exactly as they are written has caused some users to have to reinstall OS X.
I haven't tried this, but it does sound like it should work - after reading what's been posted for other QT 7.2 problems
I'll continue with the PPC version of Halo until an update for QT7.2 comes out.
Message was edited by: bobolander

megm123 wrote:
I have time machine turned off "permanently" for now. When I plug my drive in, it asks if I want to use it as a backup disk, I say decide later.
Yes, Time Machine will nag you every time you connect a disk and Time Machine isn't configured. You might be able to stop that by selecting the "none" disk.
This is where I hit a problem - I don't remember getting any Install discs when I got my computer and can't find any.
You bought it new, right? 2 discs with gray labels should have been in the box (they're easy to miss, unfortunately). They might be with the small DVD-size booklet.
You will need them, sooner or later. You need the originals (or copies) to run the +Apple Hardware Test+ that's tailored to your Mac, or to reinstall the original version of OSX and Apple apps. And the 2nd disc has your iLife apps on it.
If your Mac didn't come with Snow Leopard, you'll need a retail Snow Leopard disc, too, to repair the file system on your disk, reinstall the Snow Leopard version of OSX, or do a full restore from Time Machine backups.
What do I do?
If you can't find them call AppleCare. Give them your serial number, and they'll send a replacement set for a nominal fee.
The retail Snow Leopard disc is $29.
|
In the meantime, how old is the WD disk? It may be failing or have failed.
It's a very long shot, but try different ports, cables, and combinations of the two (sometimes a plug that works fine in one port won't make good contact in another one).
Disk Erase failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
It sounds more like the disk has failed.

I just bought the MacBook Air and tried to transfer my songs from my external hard drive to my mac. now i cannot open iTunes and it said that the file cannot be found or created.

i just bought a macbook air. ive been transfering all my songs from my external harddrive that i had on my previous laptop for itunes. now that i got them transfered. my itunes wont open. it says "the itunes library file cannot be found or created. the default location for this file is in the itunes folder in the music folder." what do i do!?!

How did you move the music? You have to do it in a specific way:
iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the whole iTunes folder and all its subfolders and files intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.

Mac install "Error- Cannot Proceed With Installation". Clean install doesn't work.

iMac 2.7 Ghz Intel Core I5
RAM: 16GB 1333 MHz DDR3
1TB, 750GB Free
OSX 10.7.5
Had flash problems in Safari and Firefox.
Regular flash update made no difference.
Tried clean install procedure per: thread http://forums.adobe.com/message/5565773
Tried downloading and running flash uninstaller for Mac.
Restarted computer every time.
Still get this error when attempting to install Flash:
Any ideas? Thanks in advance.

Hello,
Welcome to Adobe Forums.
You may download offline installer for Adobe Flash Player 11.8 from here : http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
Thanks,
Vikram

Errors Cannot find Key and Missing Apple APP. Itunes Support requires App.

****,
I hope someone can help me, I have tried to trouble shoot this problem with the itunes app for about a month now, I have tried all of the suggested supports and none work. When I install itunes, I will get a error pop up that says. "Could not open Key Unknown\ components \....." it then gives a long key number. The ask me to make sure that I have sufficient support to that key or contact your support personal. I am the only one on this PC and the Administrator. I will also at times when I try to load the itunes , get a pop up saying Apple Application Suport was not found cannot Apple Application Suport is required to run iTunes Helper. Uninstall Itunes then install again...Error 2"
I have removed this (Itunes and Quicktime) and reinstalled manytimes. My husband also has a 64 bit windows 7 PC and it is having the same issue. I have ran Virus scans on and off line and deleated the PC's back up files just incase it's a virus. Please help us out. Thanks a bunch

I found the fix to the error
Could not open key:
XXXXXX
Verify that you have sufficent access to that key, or contact your support personnel
I went to windows "Regedit" and located the registry key
HKEYLOCALMACHINE SOFTWARE Microsoft Windows CurrentVersion Installer User Data S-1-5-18Components
I right click & Choose Permissions. I ended up changing the permissions for all the files in the componets to allow my changes.
I suggest if unexperienced people try this they should read about permissions before hand. Also, I found a post at www.ecademy.com/node.php?id=150548 by R. Harris that lead me down the righeous path... Thanks.
Thanks for all the people on the discussion board, after a month I can now run I-tunes on my new machine.

Mac still frezzes after reseting SMC and PRAM

hi everyone!
I'm kind of noob here but my story is...
My macbook pro is a mid 2012 and i am having a strange problem. My mac started to became slow and constantly showing the spinning pinwheel in every move. So i've changed the hd (that originally is a 500gb 5200rpm) for a 160gb that i've found in my home.
I've changed it and re-installed the OS X Mavericks and the spinning pinwheel still show up. So I've decide to reset the SMC ( with the original hd) and no sign of change, reset the PRAM and still the same, then I've re-installed in the 500gb hd the OS X and get back to normal, but that was yesterday.
Today the pinwheel show it up again...
I am going to buy a new hd but I'm afraid that nothing changes.
If anyone have a idea, i'll thx a lot!

Sup guys!
Well, i've bought the hd and that resolved the issue, so that was the solution for this one!
bye!

I bought a song on iTunes on my iPhone -- I can play in on iTunes on my Mac, but I cannot download it and transfer it to my iPod.

I use the same Apple ID on all my devices, but I ge the following message when I try to download the song: "song cannot be downloaded because it was not purchased with your Apple ID". Then, I tried to go purchase the song again from iTunes on my MacBook, and I get a message from iTunes alerting me that I've already purchased the song. Help!!

Music>Songs>Select song>Swipe from left to right to delete.

When plugged into computer a song started skipping, pressed pause but ipod sounds makes a clicking sound. Eventually goes to black screen with red cross. Cannot reset it and doesn't register on my computer.

I had my iPod plugged into my computer and was playing the songs from there. One song started skipping so I pressed the pause button, the ipod kept making a clicking sound like it was still struggling to play the song, eventually went to a black screen with a red cross with apple.com/support/ipod underneath. Have tried to reset it but does not work, comes up with apple logo and immediately makes the clicking sound and then crashes.
Is there anyway I can get my music and photos off?? I just got a new computer and had lost everything on my old one so only have the songs and photos on my ipod, desperately want to get them on to my computer.

You may have damaged the HDD which is located in that spot. I would take it in for service.

App error 117 reset blackberry 9320

good afternoon, I have a blackberry curve 9320 and when you start to load the operating system reaches 70% and the screen goes blank with the message (Error 117 reset app)
and try installing the OS again using desktop software, also Use the BBSAK and did not give any results, also with instalador_rapido.exe did not accomplish anything, connect to pc via usb cable without battery to load operating system and the process put a battery at 100% charge and did not work either, still appears the error 117.
I need your cooperation
thanks

Hello die595tack067
Welcome to http://supportforums.blackberry.com/
Search and download your OS and all the above applies
Via sdgardne
Nevertheless, here's what I suggest...
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below. (This is probably moot given the errors you have...it's likely your data is already gone from your device, which means you must now rely on a backup you took before this happened.)
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

App error 200 reset??? help me

Hi,
Can anyone help?
I was doing a update but then accidently unppluged the phone so my blackberry torch started to reboot, it took a while then white screen App error 200 reset shows up i push it and then it trys to reboot again but same app error 200 reset over and over again. how can this be fixed?

Try the method above, which circumvents Desktop Manager. If that doesn't work, post back and we'll try some other things. In fact, go ahead and download an app to your PC called BBSAK, which you get here: www.bbsak.org
Once the app is installed, connect your device to the PC, then launch BBSAK. You'll be asked for a password. If you don't have a password set for your device, just click OK.
Your device should hopefully be recognized by BBSAK, in which case, choose the Wipe Device option. This will wipe the OS from your device, allowing you to do a fresh install using the instructions above.
*** If I've been helpful please consider clicking the LIKE BUTTON beneath my post.
*** Please remember to mark your thread as "Resolved" by clicking on OPTIONS to the right of the post and selecting "Accepted Solution."

Weird .Mac sync error -- cannot reset calenders and sync broken

Similar Messages

Maybe you are looking for