Weird message when installing Solaris from CDROM

Has anybody see something as follow:
{0} ok boot cdrom
Boot device: /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f  File and args:
SunOS Release 5.10 Version Generic_118833-33 64-bit Copyright 1983-2006 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
WARNING: mac_open e1000g0 failed
WARNING: mac_open e1000g0 failed
WARNING: mac_open e1000g0 failed
WARNING: Unable to setup switching mode
Configuring devices.
WARNING: bypass cookie failure 71ece
NOTICE: tavor0: error during attach: hw_init_eqinitall_fail
NOTICE: tavor0: driver attached (for maintenance mode only)
NOTICE: pciex8086,105e - e1000g[0] : Adapter 1000Mbps full duplex copper link is  up.What's wrong with the e1000g0 network interface?

I've had similiar messages on the Solaris Developer Edition with my machine that uses the rtls driver, and I simply ignored it, as it did still connect to the internet. I can't check it right now, as I'm currently running S10 U3 on that machine. If I remember correctly, I did do a sys-unconfig to try to get rid of some of the messages.

Similar Messages

  • Weird error when installing caps from AUR

    I get this error:
    ==> Starting build()...
    Traceback (most recent call last):
      File "./configure.py", line 30, in <module>
        store()
      File "./configure.py", line 20, in store
        print >> f, "_CFLAGS=" + ' '.join (CFLAGS)
    TypeError: unsupported operand type(s) for >>: 'builtin_function_or_method' and '_io.TextIOWrapper'
        Aborting...
    ==> ERROR: Makepkg was unable to build caps
    Am i missing some package or something?
    I need caps for alsaequal.

    Hello, I have exactly the same problem.
    So I replaced
    type -p python 1>/dev/null && ./configure.py 
    by
    type -p python2.7 1>/dev/null && ./configure.py
    The compilation does not work and I have the following error message:
    Lancer la compilation de caps ? [O/n]
    ==> -------------------------------------
    ==>
    ==> Construction et installation du paquet
    ==> Création du paquet caps 0.4.4-1 (lun. oct. 25 08:28:06 CEST 2010)
    ==> Vérification des dépendances...
    ==> Vérification des dépendances pour la compilation...
    ==> Récupération des sources...
      -> caps_0.4.4.tar.gz trouvé
    ==> Validation des fichiers sources avec md5sums...
        caps_0.4.4.tar.gz ... Réussite
    ==> Validation des fichiers sources avec sha256sums...
        caps_0.4.4.tar.gz ... Réussite
    ==> Extraction des sources...
      -> Extraction de caps_0.4.4.tar.gz avec bsdtar
    ==> Suppression du répertoire pkg/ existant...
    ==> Lancement de build()...
    Traceback (most recent call last):
      File "./configure.py", line 30, in <module>
        store()
      File "./configure.py", line 20, in store
        print >> f, "_CFLAGS=" + ' '.join (CFLAGS)
    TypeError: unsupported operand type(s) for >>: 'builtin_function_or_method' and '_io.TextIOWrapper'
        Abandon...
    ==> ERROR: Makepkg n'a pas pu construire caps.

  • Error message when installing Flash Player : List of actions not found

    I get an error message when trying to install Flash Player.
    I use Windows 64 bit with Internet Explorer 64x.
    I'm able to download, the installation starts but it stops before completing.
    I get this error message (loosely transalated) :
    Installation encountered errors
    List of actions not found
    How can I fix this ?
    Thank you
    Annie

    I solved my problem by installing the Flash Player from home.
    The network security at work prevented me from completing installation.
    Thanks for your help.
    Annie
    2012/9/26 Pat Willener <[email protected]>
       Re: Error message when installing Flash Player : List of actions not
    found  created by Pat Willener <http://forums.adobe.com/people/pwillener>in
    Installing Flash Player - View the full discussion<http://forums.adobe.com/message/4728064#4728064

  • I get the following message when installing 11.0.5 "The feature you are trying to use is on a network resource that is unavailable" for windows install

    I get the following message when installing 11.0.5 "The feature you are trying to use is on a network resource that is unavailable" for windows install

    I just found a way to get Fixit to Run.  Go to http://support.microsoft.com/fixit/ and then pick "Install or upgrade software or hardware" and run Fixit from the "Run" button on the webpage.  I just picked run, instead of save, and ran it directly from the web page for each of the apple software.  If the window doesn't come up full size, hit "Tab" twice and then "Return".  You'll be able to see the prompts from there.  Have it attempt to uninstall iTunes on its own.  Repeat the process for any of the other Apple products, including Bonjour and iCloud.  Then, go to the iTunes website and install from there.  I had a downloaded copy and installed from there, but it came up with an error about missing the apple help, or something like that.  It allowed me to uninstall, and I reinstalled direclty from the website, and it all works now.

  • General Error Message When Installing Flash Player on Mac

    I have a new MacBook Pro.  I have OS 10.8.2.   I cannot get FlashPlayer to download.  I have tried uninstalling and reinstalling Adobe Flash Player 11 from the Adobe website.  Doesn't work.  Every time I try to download, I get an error message that says "Error: General Installation Error"   Can someone PLEASE help?  I've spent hours with this and am very frustrated.

    Thank you for your reply.   I am running Safari, and I have tried  it with
    the browser closed and open, and same result.  Here's the  string:
    1/29/13 9:14:23.111 AM coreservicesd[72]: Application App:"Install 
    Adobe Flash Player" @ 0x0x7ffa02372980 tried to be 
    brought forward, but isn't in fPermittedFrontASNs ( (
    ASN:0x0-0x4fc4fc:)  ), so denying.
    1/29/13 9:14:23.111 AM WindowServer[98]: Failed  setting
    the front application to Install Adobe Flash Player, psn  0x0-0x4fb4fb,
    securitySessionID=0x186f3, err=-13066
    1/29/13 9:16:36.000  AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
    freeblks: 0,  dangerlimit: 84
    1/29/13 9:17:17.590 AM sudo[6366]: Aaron : TTY=unknown ;  PWD=/ ;
    USER=Aaron ; COMMAND=/usr/bin/open 
    http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
    1/29/13  9:31:50.494 AM coreservicesd[72]: Application App:"Install
    Adobe Flash  Player" @ 0x0x7ffa0141e3c0 tried to be
    brought forward, but  isn't in fPermittedFrontASNs ( (
    ASN:0x0-0x518518:) ), so  denying.
    1/29/13 9:31:50.494 AM WindowServer[98]: Failed  setting
    the front application to Install Adobe Flash Player, psn  0x0-0x517517,
    securitySessionID=0x186f3, err=-13066
    1/29/13 9:33:52.000  AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
    freeblks: 0,  dangerlimit: 84
    1/29/13 9:35:32.014 AM sudo[6521]: Aaron : TTY=unknown ;  PWD=/ ;
    USER=Aaron ; COMMAND=/usr/bin/open 
    http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
    1/29/13  9:44:32.000 AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
    freeblks: 0,  dangerlimit: 3
    1/29/13 9:46:55.473 AM coreservicesd[72]: Application  App:"Adobe Flash
    Player Install Manager" @ 0x0x7ffa01418520  tried to be
    brought forward, but isn't in fPermittedFrontASNs ( ( 
    ASN:0x0-0x545545:) ), so denying.
    1/29/13 9:46:55.474 AM  WindowServer[98]: Failed setting
    the front application to  Adobe Flash Player Install Manager, psn
    0x0-0x543543,  securitySessionID=0x186f3, err=-13066
    1/29/13 9:46:55.784 AM authexec[6588]:  executing /Library/Application
    Support/Adobe/Flash Player Install  Manager/fpsaud
    1/29/13 10:37:02.258 AM coreservicesd[72]: Application  App:"Install
    Adobe Flash Player" @ 0x0x7ffa02123b30 tried to  be
    brought forward, but isn't in fPermittedFrontASNs ( ( 
    ASN:0x0-0x57d57d:) ), so denying.
    1/29/13 10:37:02.258 AM  WindowServer[98]: Failed setting
    the front application to  Install Adobe Flash Player, psn 0x0-0x57c57c,
    securitySessionID=0x186f3,  err=-13066
    1/29/13 10:39:02.000 AM kernel[0]: HFS: Vol: Flash Player Very Low 
    Disk: freeblks: 0, dangerlimit: 84
    1/29/13 10:39:27.431 AM sudo[6839]:  Aaron : TTY=unknown ; PWD=/ ;
    USER=Aaron ; COMMAND=/usr/bin/open 
    http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
    1/29/13  2:54:59.429 PM coreservicesd[72]: Application App:"Adobe Flash
    Player  Install Manager" @ 0x0x7ffa01418520 tried to be
    brought  forward, but isn't in fPermittedFrontASNs ( (
    ASN:0x0-0x597597:) ), so  denying.
    1/29/13 2:54:59.429 PM WindowServer[98]: Failed  setting
    the front application to Adobe Flash Player Install Manager, psn 
    0x0-0x594594, securitySessionID=0x186f3, err=-13066
    1/29/13 2:54:59.740  PM authexec[6892]: executing /Library/Application
    Support/Adobe/Flash Player  Install Manager/fpsaud
    1/29/13 3:04:55.770 PM coreservicesd[72]: Application  App:"Install
    Adobe Flash Player" @ 0x0x7ffa014417d0 tried to  be
    brought forward, but isn't in fPermittedFrontASNs ( ( 
    ASN:0x0-0x5b65b6:) ), so denying.
    1/29/13 3:04:55.770 PM  WindowServer[98]: Failed setting
    the front application to  Install Adobe Flash Player, psn 0x0-0x5b45b4,
    securitySessionID=0x186f3,  err=-13066
    1/29/13 3:06:56.000 PM kernel[0]: HFS: Vol: Flash Player Very Low  Disk:
    freeblks: 0, dangerlimit: 84
    I look forward to your  response.
    Hilary
    In a message dated 1/29/2013 6:27:35 P.M. Central Standard Time, 
    [email protected] writes:
    Re:  General Error Message When Installing Flash Player on Mac
    created by Chris Campbell (http://forums.adobe.com/people/chris.campbell)
      in Installing Flash Player - View the full  discussion
    (http://forums.adobe.com/message/5032761#5032761)

  • HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

    I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

    Hello Valerie Anderson,
    I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
    https://discussions.apple.com/message/21854775#21854775
    Let me know if this helps.
    Thanks!
    Harry

  • Officejet 4500 wireless printer keep geeting error message when installing the driver

    hi can anyone help im trying to install my officejet printer 4500 g510 n-z driver from the hp website  and i keep getting an error message and i have no idea how to stop getting this message as i have tried a few times to install the drive and keep gettimg the same message  im running windows 8.1 if tht helps
    thanks john

    Hello jono13,
    Welcome to the HP Forums!
    I understand you're receiving an error message when installing the Officejet 4500 software. What is the exact error message on your computer? Could you send a screen shot of your exact error?
    How will you be connecting this printer? Wireless or USB?
    Please verify this information and I will assist you further.
    Looking forward to hearing from you.
    I worked on behalf of HP.

  • Error message when installing quicktime/itunes

    PLease help! I continue to get this error message when trying to install quicktime HKEY_LOCAL-MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Quicktim e.
    What should I do? In lamens terms please, not very computer literate.

    an error message appears saying that a program required for the installation is missing
    In the course of your troubleshooting to date, have you tried the following user tip with that one?
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Error message when installing, modifying or repairing Adobe Reader

    Error  1406. Could not write value Installed to key  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\IMAIL.
    Verify that you have sufficient access to that key or contact you support personnel.
    Error  1406. Could not write value Installed to key  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\MAPI.
    Verify that you have sufficient access to that key or contact you support personnel.
    Error  1406. Could not write value Installed to key  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\MSFS.
    Verify that you have sufficient access to that key or contact you support personnel.
    Error  1402. Could not open key:  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\IMAIL. System error 1009.
    Verify that you have sufficient access to that key, or contact your support personnel.
    Error  1402. Could not open key:  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\MAPI. System error 1009.
    Verify that you have sufficient access to that key, or contact your support personnel.
    Error  1402. Could not open key:  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents\MSFS. System error 1009.
    Verify that you have sufficient access to that key, or contact your support personnel.
    Error 1402. Could not open key: <Keyname>. System error 1009.
    Verify that you have sufficient access to that key, or contact your support personnel.
    Error 1406. Could not write value <Valuename> to key <Keyname>.
    Verify that you have sufficient access to that key or contact you support personnel.
    Please see: Error message when installing, modifying or repairing Adobe Reader

    Thank You phoney01..  this did indeed work perfectly for me as well!

  • I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

    Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

    check compatibility first, http://roaringapps.com/apps:table

  • My Mid-2011 Macbook Air becomes extremely hot when installing apps from the Mac App Store and when deleting apps

    My Mid-2011 Macbook Air 13-inch (OSX 10.8.1 Mountain Lion) becomes hot to the touch when trying to delete large documents, watching videos after waking it from sleep-mode and when installing applications from the Mac App Store. This has also been happening with OSX Lion before I upgraded it to Mountain Lion.

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    What needed to be done the day that you set up the new Mac was go into the Mac App Store (MAS), sign into your iTunes/MAS Apple ID, go to the Purchases pane and Accept the iLife apps that would have been there in a special section. That would have sent you Mac's unique identifier code to Apple's servers and verified that this Mac was eligible for the bundled iLife suite and then registered these apps into your MAS account.
    You might try going to  ~/Library/Caches/com.apple.appstore/adoption.plist, delete the adption plist, restart the Mac and then go to the Purchaes pane and see if you can Accept the apps into your account.

  • Show error message when Install SM7 in step 4 execute Service

    Hi All
    Show error message when Install SM7 in step 4 execute Service.
    Anyone can help me fix the problem pls!
    Regards
    Kevin
    Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
    Information for SAPInst:
    sid=SMD
    number=98
    2009.06.08 11:16:59
    Task completed with status 0
    INFO 2009-06-08 11:17:00.0
    Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:00.250
    FSL-02077  File system export (share) saploc does not exist.
    INFO 2009-06-08 11:17:00.484
    Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:00.718
    FSL-02077  File system export (share) saploc does not exist.
    INFO[E] 2009-06-08 11:17:05.265
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO 2009-06-08 11:17:05.609
    Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO[E] 2009-06-08 11:17:05.875
    FSL-02077  File system export (share) saploc does not exist.
    INFO[E] 2009-06-08 11:17:08.187
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:10.531
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:12.859
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    INFO[E] 2009-06-08 11:17:15.156
    FSL-01027  Account user="hk-is-000818\smdadm" does not exist.
    WARNING[E] 2009-06-08 11:17:20.281
    FSL-01002  Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
    INFO 2009-06-08 11:17:20.562
    Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO 2009-06-08 11:17:20.781
    Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
    INFO 2009-06-08 11:17:22.312
    Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
    INFO 2009-06-08 11:17:28.828
    Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
    INFO 2009-06-08 11:17:29.093
    Node C:\WINDOWS\system32 already exists.
    INFO 2009-06-08 11:17:31.0
    Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
    INFO 2009-06-08 11:17:32.390
    Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
    INFO 2009-06-08 11:17:33.171
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.203
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.250
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.281
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.328
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.375
    Nothing to do. User privileges are an empty string.
    INFO 2009-06-08 11:17:33.421
    Nothing to do. User privileges are an empty string.
    INFO[E] 2009-06-08 11:17:35.703
    FSL-01027  Account user="hk-is-000818\SAPServicePAS" does not exist.
    WARNING[E] 2009-06-08 11:17:40.796
    FSL-01002  Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
    WARNING[E] 2009-06-08 11:17:40.796
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2009-06-08 11:17:40.843
    FCO-00011  The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

    hi Subhash
    tkx it work
    but I got another error when install afterwards. do u know how can fix , many tkx
    Kevin
    WARNING 2009-06-09 20:39:02.421
    Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
    WARNING[E] 2009-06-09 20:39:02.437
    CJS-00095  Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
    WARNING[E] 2009-06-09 20:39:02.437
    CJS-00095  Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
    ERROR 2009-06-09 20:39:02.468
    FCO-00011  The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .

  • I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

    I keep getting an error message when installing iTunes with windows 8

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I got an error message when installing adobe premiere on elements 10 on an iMac i5

    I got an error message when installing adobe premiere on elements 10 on an iMac i5

    http://adobe.ly/t9MkRT

  • Getting an "installer failed to initialize" error when installing CS5 from CD

    Getting an "installer failed to initialize" error when installing CS5 from CD
    Mac OS X Version 10.7.5

    Try using the Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html
    If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    CS5:
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Maybe you are looking for

  • Motion 4 and MacBook Pro with integrated nVidia 9400M Grapichs?

    Hi. I wonder if somebody has experience using Motion 4 (and/or other motion graphics software)with a MacBook Pro 13" or 15" with integrated nVidia 9400M Graphics. So far I know those laptops are very good for video editing and Photoshop, but I don't

  • Why JavaBeans with JSP

    Hi, I know its an easy question and probably a silly one to ask, but still please take time to answer this. Why do we use JavaBeans with JSP to make use of reusable code. Cant we use simple classes for this? Thanks in advance

  • ERROR 507 whilst upgrading to OS7.1 9810

    Hi There I am in south africa, carrier MTN. I have a torch 9810 I went onto my blackberry desktop app and the OS7.1 bundle 1149 came up for upgrade so I started to upgrade.. All files loaded but when rebooted it showed error 507  reload software. Any

  • Deleting pages impossible (pages in use)

    I have a PDF and would like to delete one or more pages. I keep getting the message(German version) "Eine oder mehr Seiten sind in Gebrauch und können nicht gelöscht werden." Translation: One or more pages are in use and cannot be deleted. I have Ado

  • Download/Upload of Web Dynpro Components

    Hi everyone, Does anybody know if there is a way to dowload the web dynpro components from a SAP system and upload into a diferent one, like smartforms and dynpro screens do? Thanks in advance, Raphael Xavier