Weird Mouse Clicking Issue

Okay, not sure where to post this but this seems to make the most sense.
I have this recurring problem and cannot figure out what is causing it. It makes my mouse instantly double click with just one click. It has done so in the past and then gone away. I can't figure out what caused it to stop, as I've restarted my system a few times and this has not seemed to correct it so I don't think it's that simple. I've gone in and tweaked the mouse settings in the Sys Prefs as well as in the Logitech Control Center. It's completely maddening in that almost everything I click gets double clicked; windows minimize all the time, emails get deleted or marked as just because I go to do one and it double clicks and deleted or junk marks the next in the list. You get the point. I can't figure it out and wonder if anyone else has experienced this or knows what I might try in an attempt to correct this.

Having the same issue and am pretty shocked that there isn't more coverage in here. This forum http://forums.macrumors.com/showthread.php?t=791775&page=3 has a full breakdown of testing etc so it's most likely an SL problem... sheesh.
C'mon support. Get on this. There can't only be a few people with this problem. Sorry if this posts twice, my left mouse button sometimes double clicks

Similar Messages

  • Mouse clicking issues

    For the last 2 weeks or so I all of a sudden have mouse clicking issues on a 2009 iMac. The mouse (I have tried 3 different ones from apple and Logitech) seem to be able to open files etc. on a click. I have to click repeatedly to get it done. When I run the disc utility it mostly goes away. Now, I run the disc repair every morning to make it go away. Annoying. I have seen other people having similar issues - it sounds like a OS issue????

    This same scenario has happened to me sporadically over the past few months and seems to be increasing. I have the Logitech Cordless Optical Mouse for Notebooks. Got it 3 years ago for use with my G4 PowerBook (1.5 GHz, 2 GB RAM, OS 10.4.8). First I thought it was the batteries, but then realized that if I'd just wait a few minutes the problem would usually go away. Nothing new electrical on my desk that would cause it. Gets really annoying. The mouse becomes sluggish and the clicks are non responsive (a right click will open a sub-menu window, but then no other clicks work. Trying to move the mouse around on the screen gives spotty results - stops and starts - as if I'm moving it on a reflective surface. After multiple clicks the window goes away. I can disconnect the USB transmitter and have complete control with the mousepad.
    Sometimes the problem won't occur all day long. Other times it comes and goes multiple times during an hour. A restart will usually get it out of that overly annoying loop.
    I bought a new Logitech Mouse a few days ago, thinking mine was wearing out, but the same thing happened within minutes.
    I can only think there's some conflict with an OSX update. VERY frustrating. I don't want to go back to a wired mouse.
    So I, too, am eager for a solution.
    Thanks,
    -Scott
    PowerBook G4, 15 in., 1.5 GHz   Mac OS X (10.4.8)   2 GB RAM; 2 LaCie 250 GB FW drives; 1 LaCie 500 GB FW drive

  • Weird mouse click behaviour

    Hi,
    I don't really know how to explain this. Somethimes, in some situations, my mouse clicks registers twice. Like sometimes I can't minimize an applicatireaon by clicking on the taskbar entry, because the click registers twice and the application minimizes but right after that restores too. It happens with both right and left mouse buttons. Sometimes can't bring up the rigth click menu in thunar, because it appears and right after that disappears, but if I rigth click elsewhere,in an another application, it works. So it happens only with certain elements of the gui, it isn't that everywhere I click, it counts twice, only with a specific menu, or with the taskbar, or with an icon on my desktop - but can drive me crazy.
    With equinox gtk engine it happens more often than with clearlooks engine
    I observed this behavior with Linux Mint Debian Edition and with openSUSE with certain themes, and now with Arch. I don't think it is a hardware error, because it appears only with some elements of the desktop, not everywhere everytime, I don't think my mouse knows that I want to minimize firefox and decides to mailfunction just to drive me crazy
    Does anybody else observed this? Has anybody an idea how can I fix it?
    I use Xfce, but when I tried LMDE, I used Gnome, my apps are up to date, the mouse is a A4tech G6.

    I have the same behavior along with an additional clause that sometimes mouse clicks will not register at all.
    I am using i3...so I do not think its DE/WM specific. Been looking at xev...but it doesn't show up anything.
    Here's my Xorg.0.log, no errors as such, some information about using evdev for the mouse at the very end.
    [ 22.077]
    X.Org X Server 1.10.2
    Release Date: 2011-05-28
    [ 22.077] X Protocol Version 11, Revision 0
    [ 22.077] Build Operating System: Linux 2.6.38-ARCH x86_64
    [ 22.077] Current Operating System: Linux wolfdale 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011 x86_64
    [ 22.077] Kernel command line: root=/dev/disk/by-uuid/2531f3c1-e139-48c0-bbda-a6650b58eb0c ro
    [ 22.077] Build Date: 30 May 2011 08:18:15AM
    [ 22.077]
    [ 22.077] Current version of pixman: 0.22.0
    [ 22.077] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.077] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.077] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 29 19:50:11 2011
    [ 22.099] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.109] (==) No Layout section. Using the first Screen section.
    [ 22.109] (==) No screen section available. Using defaults.
    [ 22.109] (**) |-->Screen "Default Screen Section" (0)
    [ 22.110] (**) | |-->Monitor "<default monitor>"
    [ 22.110] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 22.110] (==) Automatically adding devices
    [ 22.110] (==) Automatically enabling devices
    [ 22.130] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.130] Entry deleted from font path.
    [ 22.175] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 22.175] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.175] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 22.175] (II) Loader magic: 0x7d3440
    [ 22.175] (II) Module ABI versions:
    [ 22.175] X.Org ANSI C Emulation: 0.4
    [ 22.175] X.Org Video Driver: 10.0
    [ 22.175] X.Org XInput driver : 12.2
    [ 22.175] X.Org Server Extension : 5.0
    [ 22.175] (--) PCI:*(0:1:0:0) 1002:94c1:1028:0d02 rev 0, Mem @ 0xd0000000/268435456, 0xfe9f0000/65536, I/O @ 0x0000dc00/256, BIOS @ 0x????????/131072
    [ 22.175] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 22.175] (II) LoadModule: "extmod"
    [ 22.205] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.217] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.217] compiled for 1.10.2, module version = 1.0.0
    [ 22.217] Module class: X.Org Server Extension
    [ 22.217] ABI class: X.Org Server Extension, version 5.0
    [ 22.217] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.217] (II) Loading extension XFree86-VidModeExtension
    [ 22.217] (II) Loading extension XFree86-DGA
    [ 22.217] (II) Loading extension DPMS
    [ 22.217] (II) Loading extension XVideo
    [ 22.217] (II) Loading extension XVideo-MotionCompensation
    [ 22.217] (II) Loading extension X-Resource
    [ 22.217] (II) LoadModule: "dbe"
    [ 22.217] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.222] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.222] compiled for 1.10.2, module version = 1.0.0
    [ 22.222] Module class: X.Org Server Extension
    [ 22.222] ABI class: X.Org Server Extension, version 5.0
    [ 22.222] (II) Loading extension DOUBLE-BUFFER
    [ 22.222] (II) LoadModule: "glx"
    [ 22.222] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.242] (II) Module glx: vendor="X.Org Foundation"
    [ 22.242] compiled for 1.10.2, module version = 1.0.0
    [ 22.242] ABI class: X.Org Server Extension, version 5.0
    [ 22.242] (==) AIGLX enabled
    [ 22.242] (II) Loading extension GLX
    [ 22.242] (II) LoadModule: "record"
    [ 22.242] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.250] (II) Module record: vendor="X.Org Foundation"
    [ 22.250] compiled for 1.10.2, module version = 1.13.0
    [ 22.250] Module class: X.Org Server Extension
    [ 22.250] ABI class: X.Org Server Extension, version 5.0
    [ 22.250] (II) Loading extension RECORD
    [ 22.250] (II) LoadModule: "dri"
    [ 22.250] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 22.264] (II) Module dri: vendor="X.Org Foundation"
    [ 22.264] compiled for 1.10.2, module version = 1.0.0
    [ 22.264] ABI class: X.Org Server Extension, version 5.0
    [ 22.264] (II) Loading extension XFree86-DRI
    [ 22.264] (II) LoadModule: "dri2"
    [ 22.264] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.265] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.265] compiled for 1.10.2, module version = 1.2.0
    [ 22.265] ABI class: X.Org Server Extension, version 5.0
    [ 22.265] (II) Loading extension DRI2
    [ 22.265] (==) Matched ati as autoconfigured driver 0
    [ 22.265] (==) Matched vesa as autoconfigured driver 1
    [ 22.265] (==) Matched fbdev as autoconfigured driver 2
    [ 22.265] (==) Assigned the driver to the xf86ConfigLayout
    [ 22.265] (II) LoadModule: "ati"
    [ 22.265] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 22.273] (II) Module ati: vendor="X.Org Foundation"
    [ 22.273] compiled for 1.10.0, module version = 6.14.1
    [ 22.273] Module class: X.Org Video Driver
    [ 22.273] ABI class: X.Org Video Driver, version 10.0
    [ 22.274] (II) LoadModule: "radeon"
    [ 22.274] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 22.319] (II) Module radeon: vendor="X.Org Foundation"
    [ 22.319] compiled for 1.10.0, module version = 6.14.1
    [ 22.319] Module class: X.Org Video Driver
    [ 22.319] ABI class: X.Org Video Driver, version 10.0
    [ 22.325] (II) LoadModule: "vesa"
    [ 22.335] (WW) Warning, couldn't open module vesa
    [ 22.335] (II) UnloadModule: "vesa"
    [ 22.335] (II) Unloading vesa
    [ 22.335] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 22.335] (II) LoadModule: "fbdev"
    [ 22.335] (WW) Warning, couldn't open module fbdev
    [ 22.335] (II) UnloadModule: "fbdev"
    [ 22.335] (II) Unloading fbdev
    [ 22.335] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 22.335] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
    ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
    ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6250 Graphics, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
    AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
    BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS
    [ 22.340] (--) using VT number 7
    [ 22.343] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 22.343] (II) [KMS] Kernel modesetting enabled.
    [ 22.344] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 22.344] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    [ 22.344] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 22.344] (==) RADEON(0): Default visual is TrueColor
    [ 22.344] (==) RADEON(0): RGB weight 888
    [ 22.344] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    [ 22.344] (--) RADEON(0): Chipset: "ATI Radeon HD 2400 XT" (ChipID = 0x94c1)
    [ 22.344] (II) RADEON(0): PCIE card detected
    [ 22.344] drmOpenDevice: node name is /dev/dri/card0
    [ 22.344] drmOpenDevice: open result is 9, (OK)
    [ 22.344] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 22.344] drmOpenDevice: node name is /dev/dri/card0
    [ 22.344] drmOpenDevice: open result is 9, (OK)
    [ 22.344] drmOpenByBusid: drmOpenMinor returns 9
    [ 22.344] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 22.345] (II) Loading sub module "exa"
    [ 22.345] (II) LoadModule: "exa"
    [ 22.345] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 22.346] (II) Module exa: vendor="X.Org Foundation"
    [ 22.346] compiled for 1.10.2, module version = 2.5.0
    [ 22.346] ABI class: X.Org Video Driver, version 10.0
    [ 22.346] (II) RADEON(0): KMS Color Tiling: disabled
    [ 22.346] (II) RADEON(0): KMS Pageflipping: enabled
    [ 22.346] (II) RADEON(0): SwapBuffers wait for vsync: enabled
    [ 22.356] (II) RADEON(0): Output DIN has no monitor section
    [ 22.410] (II) RADEON(0): Output DVI-0 has no monitor section
    [ 22.423] (II) RADEON(0): Output DVI-1 has no monitor section
    [ 22.436] (II) RADEON(0): EDID for output DIN
    [ 22.490] (II) RADEON(0): EDID for output DVI-0
    [ 22.490] (II) RADEON(0): Manufacturer: DEL Model: 4042 Serial#: 1145451340
    [ 22.490] (II) RADEON(0): Year: 2009 Week: 34
    [ 22.490] (II) RADEON(0): EDID Version: 1.3
    [ 22.490] (II) RADEON(0): Digital Display Input
    [ 22.490] (II) RADEON(0): Max Image Size [cm]: horiz.: 43 vert.: 27
    [ 22.490] (II) RADEON(0): Gamma: 2.20
    [ 22.490] (II) RADEON(0): DPMS capabilities: Off
    [ 22.490] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 22.490] (II) RADEON(0): Default color space is primary color space
    [ 22.490] (II) RADEON(0): First detailed timing is preferred mode
    [ 22.490] (II) RADEON(0): redX: 0.654 redY: 0.331 greenX: 0.220 greenY: 0.679
    [ 22.490] (II) RADEON(0): blueX: 0.148 blueY: 0.055 whiteX: 0.313 whiteY: 0.329
    [ 22.490] (II) RADEON(0): Supported established timings:
    [ 22.490] (II) RADEON(0): 720x400@70Hz
    [ 22.490] (II) RADEON(0): 640x480@60Hz
    [ 22.490] (II) RADEON(0): 640x480@67Hz
    [ 22.490] (II) RADEON(0): 640x480@72Hz
    [ 22.490] (II) RADEON(0): 640x480@75Hz
    [ 22.490] (II) RADEON(0): 800x600@56Hz
    [ 22.490] (II) RADEON(0): 800x600@60Hz
    [ 22.490] (II) RADEON(0): 800x600@72Hz
    [ 22.490] (II) RADEON(0): 800x600@75Hz
    [ 22.491] (II) RADEON(0): 832x624@75Hz
    [ 22.491] (II) RADEON(0): 1024x768@60Hz
    [ 22.491] (II) RADEON(0): 1024x768@70Hz
    [ 22.491] (II) RADEON(0): 1024x768@75Hz
    [ 22.491] (II) RADEON(0): 1280x1024@75Hz
    [ 22.491] (II) RADEON(0): 1152x864@75Hz
    [ 22.491] (II) RADEON(0): Manufacturer's mask: 0
    [ 22.491] (II) RADEON(0): Supported standard timings:
    [ 22.491] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 22.491] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 22.491] (II) RADEON(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 22.491] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 22.491] (II) RADEON(0): #4: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 22.491] (II) RADEON(0): #5: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 22.491] (II) RADEON(0): Supported detailed timing:
    [ 22.491] (II) RADEON(0): clock: 146.2 MHz Image Size: 433 x 271 mm
    [ 22.491] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
    [ 22.491] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
    [ 22.491] (II) RADEON(0): Serial No: G433H98MDF3L
    [ 22.491] (II) RADEON(0): Monitor name: DELL 2009W
    [ 22.491] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
    [ 22.491] (II) RADEON(0): EDID (in hex):
    [ 22.491] (II) RADEON(0): 00ffffffffffff0010ac42404c334644
    [ 22.491] (II) RADEON(0): 22130103802b1b782eb705a75438ad26
    [ 22.491] (II) RADEON(0): 0e5054bfef80714f8180b300950081c0
    [ 22.491] (II) RADEON(0): 81000101010121399030621a274068b0
    [ 22.491] (II) RADEON(0): 3600b10f1100001c000000ff00473433
    [ 22.491] (II) RADEON(0): 334839384d4446334c0a000000fc0044
    [ 22.491] (II) RADEON(0): 454c4c2032303039570a2020000000fd
    [ 22.491] (II) RADEON(0): 00384b1e5310000a2020202020200004
    [ 22.491] (II) RADEON(0): Printing probed modes for output DVI-0
    [ 22.491] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 22.491] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 22.491] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 22.491] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 22.491] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 22.491] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 22.491] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 22.491] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 22.491] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 22.491] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 22.491] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 22.491] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 22.506] (II) RADEON(0): EDID for output DVI-1
    [ 22.506] (II) RADEON(0): Output DIN disconnected
    [ 22.507] (II) RADEON(0): Output DVI-0 connected
    [ 22.507] (II) RADEON(0): Output DVI-1 disconnected
    [ 22.507] (II) RADEON(0): Using exact sizes for initial modes
    [ 22.507] (II) RADEON(0): Output DVI-0 using initial mode 1680x1050
    [ 22.507] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 22.507] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:f8ca000
    [ 22.507] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
    [ 22.507] (==) RADEON(0): DPI set to (96, 96)
    [ 22.507] (II) Loading sub module "fb"
    [ 22.507] (II) LoadModule: "fb"
    [ 22.507] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 22.517] (II) Module fb: vendor="X.Org Foundation"
    [ 22.517] compiled for 1.10.2, module version = 1.0.0
    [ 22.517] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 22.517] (II) Loading sub module "ramdac"
    [ 22.517] (II) LoadModule: "ramdac"
    [ 22.517] (II) Module "ramdac" already built-in
    [ 22.517] (--) Depth 24 pixmap format is 32 bpp
    [ 22.517] (II) RADEON(0): [DRI2] Setup complete
    [ 22.517] (II) RADEON(0): [DRI2] DRI driver: r600
    [ 22.517] (II) RADEON(0): Front buffer size: 7128K
    [ 22.517] (II) RADEON(0): VRAM usage limit set to 222868K
    [ 22.531] (==) RADEON(0): Backing store disabled
    [ 22.531] (II) RADEON(0): Direct rendering enabled
    [ 22.541] (II) RADEON(0): Setting EXA maxPitchBytes
    [ 22.541] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 22.541] (II) EXA(0): Driver registered support for the following operations:
    [ 22.541] (II) Solid
    [ 22.541] (II) Copy
    [ 22.541] (II) Composite (RENDER acceleration)
    [ 22.541] (II) UploadToScreen
    [ 22.541] (II) DownloadFromScreen
    [ 22.541] (II) RADEON(0): Acceleration enabled
    [ 22.541] (==) RADEON(0): DPMS enabled
    [ 22.541] (==) RADEON(0): Silken mouse enabled
    [ 22.550] (II) RADEON(0): Set up textured video
    [ 22.550] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 23.153] (--) RandR disabled
    [ 23.153] (II) Initializing built-in extension Generic Event Extension
    [ 23.153] (II) Initializing built-in extension SHAPE
    [ 23.153] (II) Initializing built-in extension MIT-SHM
    [ 23.153] (II) Initializing built-in extension XInputExtension
    [ 23.153] (II) Initializing built-in extension XTEST
    [ 23.153] (II) Initializing built-in extension BIG-REQUESTS
    [ 23.153] (II) Initializing built-in extension SYNC
    [ 23.153] (II) Initializing built-in extension XKEYBOARD
    [ 23.153] (II) Initializing built-in extension XC-MISC
    [ 23.153] (II) Initializing built-in extension SECURITY
    [ 23.153] (II) Initializing built-in extension XINERAMA
    [ 23.153] (II) Initializing built-in extension XFIXES
    [ 23.153] (II) Initializing built-in extension RENDER
    [ 23.153] (II) Initializing built-in extension RANDR
    [ 23.153] (II) Initializing built-in extension COMPOSITE
    [ 23.153] (II) Initializing built-in extension DAMAGE
    [ 23.295] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 23.295] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 23.295] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 23.295] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 23.295] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 23.296] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
    [ 23.296] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 23.303] (II) RADEON(0): Setting screen physical size to 444 x 277
    [ 23.674] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 23.674] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 23.674] (II) LoadModule: "evdev"
    [ 23.675] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 23.683] (II) Module evdev: vendor="X.Org Foundation"
    [ 23.683] compiled for 1.10.0, module version = 2.6.0
    [ 23.683] Module class: X.Org XInput Driver
    [ 23.683] ABI class: X.Org XInput driver, version 12.2
    [ 23.683] (II) Using input driver 'evdev' for 'Power Button'
    [ 23.683] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 23.683] (**) Power Button: always reports core events
    [ 23.683] (**) Power Button: Device: "/dev/input/event1"
    [ 23.713] (--) Power Button: Found keys
    [ 23.713] (II) Power Button: Configuring as keyboard
    [ 23.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 23.713] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 23.713] (**) Option "xkb_rules" "evdev"
    [ 23.713] (**) Option "xkb_model" "evdev"
    [ 23.713] (**) Option "xkb_layout" "us"
    [ 23.734] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 23.734] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 23.734] (II) Using input driver 'evdev' for 'Power Button'
    [ 23.734] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 23.734] (**) Power Button: always reports core events
    [ 23.734] (**) Power Button: Device: "/dev/input/event0"
    [ 23.750] (--) Power Button: Found keys
    [ 23.750] (II) Power Button: Configuring as keyboard
    [ 23.750] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [ 23.750] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 23.750] (**) Option "xkb_rules" "evdev"
    [ 23.750] (**) Option "xkb_model" "evdev"
    [ 23.750] (**) Option "xkb_layout" "us"
    [ 23.752] (II) config/udev: Adding input device Dell Dell USB Keyboard Hub (/dev/input/event5)
    [ 23.752] (**) Dell Dell USB Keyboard Hub: Applying InputClass "evdev keyboard catchall"
    [ 23.752] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard Hub'
    [ 23.752] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 23.752] (**) Dell Dell USB Keyboard Hub: always reports core events
    [ 23.752] (**) Dell Dell USB Keyboard Hub: Device: "/dev/input/event5"
    [ 23.766] (--) Dell Dell USB Keyboard Hub: Found keys
    [ 23.766] (II) Dell Dell USB Keyboard Hub: Configuring as keyboard
    [ 23.766] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input5/event5"
    [ 23.766] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard Hub" (type: KEYBOARD)
    [ 23.766] (**) Option "xkb_rules" "evdev"
    [ 23.766] (**) Option "xkb_model" "evdev"
    [ 23.766] (**) Option "xkb_layout" "us"
    [ 23.767] (II) config/udev: Adding input device Dell Dell USB Keyboard Hub (/dev/input/event6)
    [ 23.767] (**) Dell Dell USB Keyboard Hub: Applying InputClass "evdev keyboard catchall"
    [ 23.767] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard Hub'
    [ 23.767] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 23.767] (**) Dell Dell USB Keyboard Hub: always reports core events
    [ 23.767] (**) Dell Dell USB Keyboard Hub: Device: "/dev/input/event6"
    [ 23.783] (--) Dell Dell USB Keyboard Hub: Found absolute axes
    [ 23.783] (--) Dell Dell USB Keyboard Hub: Found keys
    [ 23.783] (II) Dell Dell USB Keyboard Hub: Configuring as mouse
    [ 23.783] (II) Dell Dell USB Keyboard Hub: Configuring as keyboard
    [ 23.783] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input6/event6"
    [ 23.783] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard Hub" (type: KEYBOARD)
    [ 23.783] (**) Option "xkb_rules" "evdev"
    [ 23.783] (**) Option "xkb_model" "evdev"
    [ 23.783] (**) Option "xkb_layout" "us"
    [ 23.783] (II) Dell Dell USB Keyboard Hub: initialized for absolute axes.
    [ 23.783] (**) Dell Dell USB Keyboard Hub: (accel) keeping acceleration scheme 1
    [ 23.783] (**) Dell Dell USB Keyboard Hub: (accel) acceleration profile 0
    [ 23.783] (**) Dell Dell USB Keyboard Hub: (accel) acceleration factor: 2.000
    [ 23.783] (**) Dell Dell USB Keyboard Hub: (accel) acceleration threshold: 4
    [ 23.784] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 23.784] (II) No input driver/identifier specified (ignoring)
    [ 23.785] (II) config/udev: Adding input device Dell Premium USB Optical Mouse (/dev/input/event4)
    [ 23.785] (**) Dell Premium USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 23.785] (II) Using input driver 'evdev' for 'Dell Premium USB Optical Mouse'
    [ 23.785] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 23.785] (**) Dell Premium USB Optical Mouse: always reports core events
    [ 23.785] (**) Dell Premium USB Optical Mouse: Device: "/dev/input/event4"
    [ 23.810] (--) Dell Premium USB Optical Mouse: Found 14 mouse buttons
    [ 23.810] (--) Dell Premium USB Optical Mouse: Found scroll wheel(s)
    [ 23.810] (--) Dell Premium USB Optical Mouse: Found relative axes
    [ 23.810] (--) Dell Premium USB Optical Mouse: Found x and y relative axes
    [ 23.810] (II) Dell Premium USB Optical Mouse: Configuring as mouse
    [ 23.810] (II) Dell Premium USB Optical Mouse: Adding scrollwheel support
    [ 23.810] (**) Dell Premium USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 23.810] (**) Dell Premium USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 23.810] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input4/event4"
    [ 23.810] (II) XINPUT: Adding extended input device "Dell Premium USB Optical Mouse" (type: MOUSE)
    [ 23.810] (II) Dell Premium USB Optical Mouse: initialized for relative axes.
    [ 23.810] (**) Dell Premium USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 23.810] (**) Dell Premium USB Optical Mouse: (accel) acceleration profile 0
    [ 23.810] (**) Dell Premium USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 23.810] (**) Dell Premium USB Optical Mouse: (accel) acceleration threshold: 4
    [ 23.810] (II) config/udev: Adding input device Dell Premium USB Optical Mouse (/dev/input/mouse0)
    [ 23.810] (II) No input driver/identifier specified (ignoring)
    [ 23.813] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 23.813] (II) No input driver/identifier specified (ignoring)

  • Cairo-compmgr + Openbox + xf86-video-intel + mouse clicks issue

    When I start cairo-compmgr with Software Rendering, I face issue of clikable items not being highlighted when I hover mouse over them.
    Also, I have the issue of first item being selected automatically when I right click on certain apps.
    Is there anything I can do about it?

    shadyabhi wrote:I guess both use the same video driver.
    Nouveau? (EDIT: Just re-read thread title: Obviously not Nouveau!) That's what I am using over here. I thought there might be some quirk in an xorg.conf or something, but 1) I am pretty sure that running Nouveau neither generates nor requires one, and 2) I cannot see Cairo-compmgr altering or creating an xorg.conf.
    Last edited by uc50ic4more (2011-04-02 20:03:08)

  • Mouse click issue

    The left moust button requires several clicks to work and it is not the mouse it is hapening on all my computers after last update.  10.9.1 os extremely frustrating you open something wiht three clicks close it with two and four clicks the hold to move it.

    Hi Gtstiefel,
    Welcome to Lenovo Community!
    I’m sorry to hear that you are facing the issue with Touchpad on ThinkPad T420.
    The issue might be related to Touchpad drivers, Hence I request you to check with installing latest Touchpad drivers to resolve.
    If driver is already installed please uninstall it and download the latest driver from the below link.
    Please click here to download the file.
    Hope this helps! 
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo T510 mouse click issue

    Hi, 
    I have Lenovo Thinkpad T510. Lately, I have been having isses with touchpad and trackpad right clicks, right click do not work. This was right after a little bit of water had gone inside the touch pad right click button ( Just about two drops). After this incident, trackpad left click stopped working too, and water did not go insde in this button at all. I had immidietly turned off the machine and botted back up several hours later, but it seems to be still not working. 
    Edit: After this incident, I have noticed computer becomes unresponsive at times for several seconds. 
    any suggestions?
    Thanks..

    hey OhhLenovo,
    i suggest not using the T510, call our support team via
    1-800-565-3344 [24 hours/day 7 days/week]
    At the same time and this is something which I had learned from an accident i had with my phone... if you have a container and uncooked rice, place the laptop and cover it with the uncooked rice.
    It's based on this : http://lifehacker.com/269427/dry-out-your-soaked-gadgets-in-rice
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Strange issue with left mouse clicking freezing other inputs on the Mac

    I'm having a strange issue with my game. I'm using Flash CS6 and a Mac.
    I've got a character that I move around the screen with keys, and you can click the left mouse button to make him throw something. The weird issue is when I click the left mouse button a lot, it seems to stop any other inputs from coming in, so for example, if I hold the right arrow key down while I'm doing a left clicking, and then let go of the right arrow key, the character will keep on moving right for a few seconds, until it finally get's the key_up event and stops.
    Even not using any mouse event handlers, so the mouse is doing nothing in the game still causes the key inputs to be delayed just by left clicking, any ideas?
    I've just tested the .swf on a PC and there was no problem, the mouse clicking was not causing any issues, so it's something peculiar to the Mac.

    Hi,
    This could be an issue if you were using Safari 5.1+ in 64bit mode. This should go away if you run Safari 5.1+ in 32 bit mode. You can change this by
    1. Go to /Applications
    2. Find Safari->RightClick->Get Info->Check 'Open in 32-bit mode' check box.
    3. Relaunch Safari 5.1 again.
    Thanks!
    Mohan

  • *** is up with this mouse - not a design tool / double click issue ****!!

    who has a new mouse?
    who hates them?
    A. Me
    jesus what are they doing, a design based community (mainly) and they bring a mouse out that is about as responsive as a shopping trolley!! after effects / cinema 4d (GOD)even photoshop is suffering!
    APPLE SORT HTIS OUT AND GET THE SCROLLY THING BACK IN
    another issue is the double click problem! i have a busy life as it is and im not too keen in doing the same thing 3-4 times but thanks to this problem i am, the only settings to change the speed of double is in settings (SOMEONE GUIDE ME IF HTIS IS WRONG) but its a problem that will not go away
    even clicking once on a layer to click and drag in after effects for example is openign precomps and really getting on my tits (can i say tits, well i have: i mean the blue tit of the bird family ha ha ha)
    but not laughing really apple what have you done to this mouse and my freedom to work.
    please let me know???
    1 unhappy bunny
    ps. come on admin let me know why life is getting difficult for us designers? PLS??

    electricpalmtrees.tv wrote:
    ps. come on admin let me know why life is getting difficult for us designers? PLS??
    There's nobody here but we users.
    If you have a double click issue than slow the time down in System Preferences > mouse. The slow side gives you more time between clicks, faster is less time.
    If you have tracking issues the preference slide bar range doesn't solve you can experiment with the settings as explained here:
    http://reviews.cnet.com/8301-13727_7-10392736-263.html
    Regards
    Edit: Here are a few more tools that might "tame the beast" for you.
    http://reviews.cnet.com/8301-13727_7-10414148-263.html?tag=mncol;txt
    Message was edited by: captfred

  • Captivate 8 - Mouse Click/Audio Narration Issue

    I receorded my software simulation, then added recorded narration to each slide afterward. When I go to preview my course, each time the mouse click happens, the audio narration volume is decreased slighly before, during, and slightly after the mouse click. I wish I could say it was by a neglible amount, but on certain slides it nearly "covers" my narration completely. I can't seem to find anything in the Adobe Captivate forums about this specifically, which is surprising! So that leads me to believe there is a setting somewhere. Has anyone else encountered this?

    Hi there
    The fact you don't see references to this in the forums is indicative of the fact that (at least for me) this is the first such report I've seen of this specific behavior. It could be that it's a bug. Following that, I'd strongly urge you to file a bug report on it using the link below:
    http://www.adobe.com/go/wish
    The behavior you are describing is consistent with what I might expect of the Background Audio and Slide narration.
    If you aren't using Background Audio, perhaps try clicking Audio > Import to > Background so you get the dialog. Then configure the dialog so you clear the option for reducing the volume.
    Once you have done this and clicked Save, click Audio > Remove > Background and see if that fixes anything. If not...
    Try clearing the preferences and publish again,
    My crystal ball is on the fritz and my psychic skills are nearly non-existent, so I can't tell whether you are using the Mac or the PC version. But if it's the PC version, here is how you clear the preferences.
    Close Captivate
    Right-click the Shortcut icon and choose Properties
    From the Shortcut tab, click the Open File Location button
    Windows Explorer should open - From there, locate the Utils folder
    Double-click the CleanPreferencesWin.bat file
    Restart Captivate and test
    Cheers... Rick

  • Issues with mouse clicks/jumps after using CleanMyMac App.

    Since using this app. my hitherto slightly slow responding iMac has required multiple mouse clicks and is less/unresponsive.
    Anyone else used this software?
    As yet have not approached CleanMy Mac.
    I have reinstalled Mountain Lion (download) not clean install.
    Any suggestions? Is there a separate app for mouse that I can reload. Im guessing a minor chunk of code was deleted along with rubbish.
    Reg25x

    Uninstall CleanMyMac and do not reinstall it.
    CleanMyMac is one of a broad category of time- and money-wasters capable of causing system corruption that can only be rectified by reinstalling OS X, restoring from a backup, or completely erasing your system and rebuilding it from the ground up. Get rid of it and test your Mac for operation. If it does not perform normally, the possibility that Cleanmymac resulted in system corruption must be considered.
    The vast majority of Mac problems reported on this site are the direct result of having used garbage like that. Never install such junk on a Mac.

  • Issues with "wait until mouse click"

    when I put wait until mouse click it doesn't register mouse down or mouse up. Because of that, my game is sloppy and skips some scenes if I accidentally hold down my mouse for more than a split-second click. Is there any way to manipulate the wait for mouse click behavior so it works only when the mouse button is released?

    Hmm, I wonder if he figured it out already, since he didn't even answer your question.  He seems to be talking about the built-in "Wait for Mouse Click or Key Press" behavior in the behavior library.  Sometimes those behaviors can become overly complicated for the simplest of things.  I recommend you just go ahead and roll your own frame script, as EtchK was implying.  It's pretty easy, you just need two short handlers:
    on exitFrame
      go to the frame
    end
    on mouseUp
    -- do whatever
    end

  • HELP - mouse click no longer working - Tiger bug?

    Hi Guys,
    I had a weird issue with Tiger (10.4.10) on my PowerBook G4 this evening. I was dragging a file to the trash, and "dropped" it onto the dock by mistake, just missing the trash. I was slightly to the left of the trashcan. I expected the icon to jump back to the desktop, as the place I had dropped it was invalid, but to my surprise, as I moved the pointer across the screen with the mouse button unclicked, a ghost version of the icon was still attached to the mouse pointer.
    I was unable to click on anything, as the OS still believed for some reason that I was dragging this icon around. I used the keyboard to reboot the laptop, and when it came back up, the mouse click was not working - I can drag around, but can't click on anything. This is with the on board trackpad. I also have a bluetooth apple mouse, which exhibits exactly the same behaviour.
    I've rebooted several times (and shutdown and removed the battery), zapped the PRAM. Nothing has helped. I've tried logging in as a different user, but the click still doesn't work with the on-board or external mouse. It's like something within the OS has been corrupted, but I don't know what I can do. I have loads of data on the laptop, so I am not rebuilding. There is something on the help pages about resetting my PowerBook PMU, but I don't think this should be required.
    This is a major, urgent issue for me, as I can't use the laptop until I figure out how to resolve this.
    Anyone - please help
    Thanks,
    Robin

    Thanks for the feedback. Since resetting the PMU fixed the problem, it's not a bug but some conflict in the original setup.
    If you want to report this to Apple, either send Feedback or send bug reports and enhancement requests to Apple via its Bug Reporter system. Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

  • Mouse panning issues in Flipview

    Hi,
    I have a problem in mouse panning issues in WinJS Flipview control.
    Here is my sample:
    https://skydrive.live.com/redir?resid=533F417A2E04AEC4!1009
    My problem is: I can zoom images in flipview and panning, zooming or scrolling them via finger touch.
    So, is there a simple way to enable mouse panning, scrolling?
    I think it is useless to zoom if the user cannot drag image by mouse if there is no touch device.
    Thanks so much.
    Nick

    I think adding MSGesture is a fine idea. What you're experiencing here is just a difference in the native workings of touch and mouse, so you have to manually compensate for these differences.
    Because panning and pinch/zoom in touch mode give you behaviors that are not directly translatable to mouse actions, the mouse does not interpret similar actions unless you ask it do.
    Panning with a finger is the most natural thing to expect for touchmode, but it does not directly translate into click and drag, and for that reason, mouse does not pan.  However, you can just add the event so that you get the same behavior.  It's
    extra work, but you have to take into account that not all developers want the same behavior.  For example, I expect that someone will say "I don't want to pan when I touch the screen, I want to draw a line, like I can with a mouse.  How do
    I disable this behavior?"
    I hope this clears things up for you.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Random selection/movement/execution of any tool involving mouse click.

    Hi nice people, hopefully you have a good day before reading my post.
    Since there're already several posts about this issue, I'll save some trouble explaining the issue.
    From this forum:
    http://forums.adobe.com/thread/373520
    http://forums.adobe.com/message/3686044
    http://forums.adobe.com/message/2901762
    From outside board:
    http://www.clearps.com/photoshop-forum/index.php/t/77403/
    http://www.techplex.net/postst25521_cs4-bug-selection-tool-yields-random-boxes.html
    http://www.photoshopgurus.com/forum/photoshop-troubleshooting/29186-photoshop-cs4-cs5-acti ng-like-they-possessed.html
    http://digitalweddingchat.com/showthread.php?14289-weird-mouse-problem-in-PS..-posessed-mo use!
    and thanks to slothums, here's a nice video for it :http://digitalmighty.com/random/PSD-CS4-Problem.swf .
    Back to my case,here's the system info that might be related:
    -All drivers updated.
    -CS4 and CS5 both updated to newest version, though issue actually happens regardless whether it's CS4 or CS5, newest patch or a bit old.
    -Logitech MX518
    -Win 7-32bit/I930/R6950/Asus P6TD/Crucial 4G/Dell 2311H
    And here's what I tried before, not solving the issue at all.(i.e. all threads above are not containing the solution)
    -Update to CS5, degrade to CS4, update to newest patch, roll back to old one.
    -Adjust various options in the preferrence like OpenGL drawing and temp file location.
    -Reset the preferrence, reset the plugin or even clear all 3rd party plugin,reset the temporary files folder of the system.
    -Purchase a new mouse,try with old graphic card which is R4870 and 8800GT,try with only 2G ram, try with smaller monitor.
    -Reinstall the creative suit completely with using Adobe Cleaner to clear all the residual info/files/reg of photoshop.
    None of them work, and issue persists.
    Generally the issue is like someone pulling you mouse while holding the left mouse key or releasing it against you holding it, resulting a tons of unwanted execution (random box, random erasing, messy brush, expanding or reducing your selection area, namely destroying the work).
    There's no precise way of reproducing the issue, though the way I test wheter my action works is by crazy moving mouse and clicking, which sometimes will cause random area to be selected even if I only click the mouse(and actually I invert the mouse and make sure that the cursor is not moving at all)
    It's affecting all tools with which you need to have some kind of clicking in it, which consists of most my workload. Literally when it happens, it's cancelling whatever I do and I have to waste same amount of time to get rid of those actions. This is driving me nuts really.
    Sorry I can't provide with more details though I know it could be rather usefull if I remembered when I for the first time had this issue and what I did around then
    Could anyone shed any light on this issue?

    Sounds like you've really been through the ringer with this.  I can only imagine your frustration.
    Does it only happen ONLY with Photoshop or do you see the same problems with other apps?  I really don't think it's a Photoshop problem, given that you're seeing it in two different versions, and that a lot of others virtually never see the problem.  Adobe would be out of business if everyone was seeing this kind of mouse madness.
    You've updated drivers...  Does that include any BIOS updates or driver updates for the motherboard itself?
    Have you used a tool like AutoRuns to determine all of what's starting and running on your system?
    People with as much trouble as you have often work very long and hard, well beyond a point where they should consider a punt - e.g., wipe the system completely and do a fresh reinstall of the OS, or even go so far as to buy a new computer.  I'd probably take the old one out to a deserted spot and shoot it up pretty good, myself.  Just remember to keep in mind that your time is worth something.  If you spend tens of hours of time trying things, diagnosing things, undoing errors, etc. that's time you could be productive if the problem weren't happening.
    -Noel

  • Mouse clicks blocked improperly when stage resizes

    Hi everyone,
    Been working on this for a while with no success. would really appreciate your help.
    We have the following issue: 1 main flex application is loading another flex application swf using a swfloader placing the child app in the same security domain, but in separate application domains from the parent. There is an '...allowDomain(*)' between the apps and the stage scaling is set to no scaling.
    The problem is that when the stage is resized (window size increases or it goes to fullscreen) the child app 'grows' a large invisible area that blocks mouse clicks from reaching the parent app. This area far exceeds the child app's width & height and can be seen only when doing 'right-click' --> 'show redraw regions'. When scaling the window slowly back to the original stage size that the flash player started out with, those areas grow smaller and eventually disappear. If i load the child app when the main app stage size (window size) is already very big (or in fullscreen), this issue does NOT appear.
    Thanks in advance,
    Uri

    Sounds like a bug.  If you have a simple test case, please file a bug.
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.
    Blog: http://blogs.adobe.com/aharui

Maybe you are looking for

  • MacBook Pro, 15" Late 2008, 10.6.7 Model 2,2 2.16 ghz Core 2 Duo

    MacBook Pro, 15" Late 2008, 10.6.7 Model 2,2 2.16 ghz Core 2 Duo This condition just sprang up.  Machine not dropped, no new parts added, OS stable, no single or significant change to anything on the box. No new external hardware.  Did a restart and

  • Buying a New phone but can not decide on which mod...

    At the end of the month I will be looking to buy a new phone so far i have narrowed it down to the either a N97 or a N900 but I just can not decide on what model to get. Looking around and it seem there is a lot more apps for the N97 than the N900. I

  • How to restore the oracle backup to the other host

    Hi all:   I used the command 'brbackup' to backup the database on the host A by online type . I had installed a new sap on the host B and there is the same hostname, oracle version, os version, sap version, SID, system number and directory in the hos

  • Unable to find the facebook notification

    Hi Folks... I am quite a new BB user... can anyone please help to advise on my above qn? I got a Facebook push mail notification [1f *] but i just unable to find the notifiction when i search my facebook app.... so there is a icon of (unread facebook

  • Distributed transactions and connection pooling

    Hi, We have a problem with the enlistment of connections in distributed transactions. The following very simple C# program does not work correctly (a simple form with one button and a class hosted in COM+). If you put a breakpoint on "cnOraTx.Close()