Weird noises in the Skype call that only i can hea...

so im getting these weird noise in skype, obviously, ANYWAY the first problem was that skype plays audio through the speakers instead of my headphones which i fixed by seletecting "Speakers and Headphones" as a default device and communication device and that solved the problem untill i had this problem which im asking RIGHT NOW, anyway im getting like a fan like static sound in the skype call i made sure that no one was using a fan in the call i was in and all of them werent using any, i then unplugged my headphones so the audio can be played through the speakers of my laptop and everyone could hear that noise, the only way i can fix this is by setting Communications headphones as a default device but then it brings me back to the problem of other audio such as youtube videos being played through the external speakers but if i disable "Speakers and Headphones" everything works but i cant ADJUST THE VOLUME OF EVERY INDIVIDUAL PROGRAM WTF? CAN SOMEONE HELP ME!

depending on your service provider, they're going to have to take care of it possibly with a ticket of sorts. usually it's an issue at the tower level. i can guarantee nothings wrong with your phone tho:D

Similar Messages

  • I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

    I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

    Extending using a wireless connection always results in a performance compromise.
    If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
    Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
    If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
    Post back to let us know which way to you want to go.

  • I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

    I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

  • All ivr port busy , the system will prompt the next call that it's full load

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    we currently had 130 port IVR (we are running CCX 7.0 Premium )
    Is there any way to write the script for IVR so that when all IVR ports are busy, the system will prompt the next call that it’s  full load ? Can we do that ? If yes please share the documentation how to configure it
    Thanks so much !

    hi netbakter
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    It requires  IVR port to create a script to play prompt, while all of the IVR ports are currently busy. If there are some ports left to write script, it's not possible to service many customers at a same time, and the overload is still not resolved, either.
    please  explain more about this solution
    thanks.

  • Customizing Slideshows - how do I add an image in the text box that only shows up for a specific ima

    Customizing Slideshows - how do I add an image in the text box that only shows up for a specific image and not in every text box?

    Can you maybe provide a screen shot to further explain your question?
    Julia

  • Is it possible to record parts of a phone call on Skype into Logic, then play back the audio while still on the Skype call?  I'm a voice teacher coaching students in other cities, and Skype is not helpful with this idea.

    Is it possible to record parts of a phone call on Skype into Logic, then play back the audio while still on the Skype call?  I'm a voice teacher coaching students in other cities, and Skype can't offer any suggestions.

    Hi
    What I'm saying is:
    Make a new MONO audio track (use the + button). Assign it to input 1
    Make a second new MONO track, assign it to input 2
    Name both tracks, record-enable both tracks, and record.
    You could, of course, make both tracks in one go via the new track dialog box, and hav ethem automatically assigned to ascending inputs.
    CCT

  • My phone needs a restore but I can not because my pass code is active. It only allows me to go to the emergency call screen. I can't type in my pass code What should I do?

    My phone needs a restore but I can not because my pass code is active. It only allows me to go to the emergency call screen. I can't type in my pass code What should I do?

    Thank you so much I actually did have restrictions enabled. Ur too sweet thanks again for your help

  • HT201401 My previously made calls are not displaying in the recent call section?  How can I restore  them+

    My previous calls are not displaying in the recent call section.  How can I fix this?

    There are some recovery programs out there if you google them - many with free trials. I haven't tried them so I have no opinion.Read any professional tech and user reviews you can find before you try one. I have read here in the past that some have worked for people who have posted here. 
    To help in the future, have you considered using Jump Desktop - Remote Desktop? I know it won't solve the problem you're dealing with now (unless notes were taken on your computer.) It's in the app store. It's the #1 paid app in the business category and the reviews are great. It allows you to see anything that's on your computer on your ipad. If you take your notes on your ipad then you might want to email them to yourself, put them on Word in your computer, for example, and then if you need them in class, you remotely connect your ipad to your computer and you will see your notes. This way you won't have to rely so much on the cloud. The explanation would be too long here, but you might want to take a look at it. You can use the free trial on jumpdesk.com and then if it works for you, buy it in the app store. 
    Meanwhile, it's hours since you sent this post. Hopefully others who can help solve your problem who are on this forum now can help you. I hope you get your notes back. Don't give up too quickly.
    Hope this helps. 

  • Is there any way to send some one a password protected pdf that only they can access/view with a password?

    Is there any way to send some one a password protected pdf that only they can access/view with a password?
    Thanks!

    Hi wonderingtoday,
    Yes, you can! If you have Acrobat, you can assign an "Open Password" to the PDF, so that only people who have that password can open the PDF. If you don't have Acrobat, you can try it for free for 30 days. For more information, see www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • If i have an ipod and an ipad,the ipad apps that i bought can i download them for free on ipod?, If i have an ipod and an ipad,the ipad apps that i bought can i download them for free on ipod?

    If i have an ipod and an ipad,the ipad apps that i bought can i download them for free on ipod?, If i have an ipod and an ipad,the ipad apps that i bought can i download them for free on ipod?

    Some apps are universal ( noted by the "+" symbol).
    All others will only work on the ipad or iphone/ipod, not both.

  • If I put my Apps in the cloud does that mean i can't access them without wi-fi service?

    If I put my Apps on the Cloud does that mean I can't use them if I have no available wi-fi?

    Not at all. It only means that they are backed up. Your apps are still on your device. If you use iCloud, then when you purchase a new app, then the app is automaticallly pushed to all other iCloud enabled devices for that account.

  • I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

    I just installed Photoshop Elements that is supposed to be for Mac. The message appeared that said, ""You can't open the application Photoshop Elements 2.0 because PowerPC applications are no longer supported." I have a Mac OS X, Version 10.8.5,

    Have a look here:
    https://www.google.com/search?q=%22You+can%27t+open+the+application+Photoshop+Elements+2.0 +because+PowerPC+applications+…

  • I'm trying to edit a talking head video and want to find an straightforward way to mark a spot at the end of a statement and then cut the clip at that point. Can you help? thanks.

    I'm trying to edit a talking head video and want to find an straightforward way to mark a spot at the end of a statement made by the subject and then cut the clip at that point. Can you help? Thanks.

    I don't know how to mark a clip the way you want without adding an audio clip and putting in markers and then splitting the clip. You would think that hitting M would be the logical way to do things, but...
    But, one can just click before the place one wants to edit, hit the spacebar and hit it again when the exact place is reached. Then go to the clip menu and click split clip. That works, but one really needs to keep the cursor out of both the timeline and the event browser, or the place in the timeline gets changed..
    Are you really still using iMovie 08? That drove me nuts...a year later iMovie 09 came out with some needed improvements, and iMovie 11 with its audio adjustments is even better.
    Personally, I edit iMovie with kind of a meat axe. I grab whole chunks of video and put it into the project, then edit the ends to get the frame I want. I got too frustrated otherwise.
    Hugh

  • How to set the maximum length that a user can enter in Msgstyledtextinput

    Hi Everyone,
    I'm currently using EBS 11.5.1 and 10.2g DB
    Is there a way that I can set the maximum length that a user can input?
    I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
    Developer Mode Exception encountered in item SaveLocation
    Error: The item SaveLocation has a maximum length (100)
             which is not equal to that of the corresponding VO attribute
           , SaveLocation length (150).
    Action: Make sure they are equal in size. There must be other way to set that value
    Thanks,
    Elmer

    You have to set the maximum length of column to 150 to avoid this error.
    You can set the same in Jdev.
    Thanks
    --Anil                                                                                                                                                                                                                                                       

  • I have imported my music from my iPhone to my Mac book pro. The problem is that now I can't listen to it. It's stating that my computer is not authorized. How can I authorize??

    Hi

    Please don't make multiple posts, your question has been answered in your other thread.
    I have imported my music from my iPhone to my Mac book pro. The problem is that now I can't listen to it. It's stating that my computer is not authorized. How can I authorize??

Maybe you are looking for