Weird noises with lock sounds and speakers

My iPad mini is making weird noises when typing and locking occasionally. It's gone away after I restarted the device and then later goes back to it. I don't know what to do with it. Any suggestions?

I've tried restarting my iPad but after a while after use it goes back to it. Here is a link to a video of someone having the same problem. http://youtu.be/eFSuY3f53q8

Similar Messages

  • Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?

    Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?
    I use a Mini as the family media center and would like to have 5.1 or 7.1 sound for films but don't want a huge piece of eletronic equipment (I have one of those, but it isn't hooked up because it doesn't fit on the bookshelf). Years ago I used a PC and still use the Creative Audigy speaker system (Jimmy rigged to the Mini) that I ran from the PC. The Audigy PCI sound card obviously doesn't work on the Mini, so I just have two chanel plus sub. That has been fine since I switched to the Mini in 2007, but am updating to a new Mini in the summer and would like to upgrade my sound as well.
    I also wouldn't be opposed to a USB soundcard that can drive the speakers. In fact, my wife would prefer smaller and less visible, ergo USB card hidden in the back.
    Suggestions?

    Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
    One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
    Carl

  • Keyboard sounds and lock sound and recharge sound not functioning even though "on" in settings. What to do?

    Keyboard sounds, lock sounds and recharge sound don't sound even though "on" in settings. What to do?

    Hi there,
    I would recommend taking a look at some of the troubleshooting stepd found in the article below.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    -Griff W.

  • I just purchased and downloaded Logic 9. I had Logic 8 previously installed. What the **** happened to my Logic 8. It's gone along with the sounds and my my G4 mastering Folder. And... where are all these sounds stored on my computer I can't find them?...

    I just purchased and downloaded Logic 9. I had Logic 8 previously installed. What the **** happened to my Logic 8. It's gone along with the sounds and my my G4 mastering Folder. And... where are all these sounds stored on my computer I can't find them?...

    Very many thanks Niel. My problem solved in less than five minutes. I've never had to use that command before. I found the folder and copied it - but I'm still no clearer as to where it was!
    Thanks again

  • No sound in my iphone 4s. I can make calls but no ring tone or lock sound and siri also doent talk. My sound settings are ok and it is not in silet mode. Please help

    no sound in my iphone 4s. I can make calls but no ring tone or lock sound and siri also doesnt talk. My sound settings are ok and it is not in silent mode. Please help

    Reset, restore, stop trolling.

  • I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

    I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

    Hi nitramred,
    To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    Take care,
    Alex H.

  • Reports of 17.0.0.169 with garbled sound and vid on rtmp streaming w/jwplayer?

    Hello Adobe,
    I run a website that uses live streaming rtmp to the jwplayer6 video player.  Starting today, some viewers who downloaded Adobe Flash player 17.0.0.169 are getting very garbled sound and video that speeds up/slows down.  This is happening on a number of users on various platforms: Win 7, Win 8.1, Linux and various browsers; Firefox, Safari, Opera, and IE (reported so far).  Some folks are reporting it happens only on Firefox and not Chrome.  Thoughts?  How to proceed?  We are telling our users, unfortunately, uninstall the latest version of Flash and rollback.
    Frank P.

    Hi Jeromie,
    I'm and end user getting disastrous garbling and speeding via Ustream Streams.One broadcaster I watch was able to almost elimate the issue by reducing the quality of the outgoing content I believe.  It would be beneficial if you contacted Ustream yourself so they can notify their subscribers of a work around.
    Laurence
    Sent from Yahoo Mail on Android
    From:"Jeromie Clark" <[email protected]>
    Date:Mon, Apr 20, 2015 at 15:01
    Subject:[Installing Flash Player] Reports of 17.0.0.169 with garbled sound and vid on rtmp streaming w/jwplayer?
    Reports of 17.0.0.169 with garbled sound and vid on rtmp streaming w/jwplayer?
    created by Jeromie Clark in Installing Flash Player - View the full discussion
    Hi Simon,
    I'm really sorry to hear that your event may be impacted.  I'd highly recommend that you reach out to Ustream.  We would be more than happy to share technical details with them on how to configure the streams to work around the issue.  We will have a public beta available for download before your event at http://www.adobe.com/go/flashplayerbeta/, but realize that this is a sub-optimal solution.
    Ustream employees can send me a private message via the forums (just click my name), and I'll be more than happy to put them in contact with an engineer that can offer guidance.
    Thanks,
    Jeromie
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7455939#7455939 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7455939#7455939
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Installing Flash Player by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I have a problem with the sound and voice communication programs amplifier

    I have a problem with the sound and voice communication programs amplifier

    Define "voice of the device." 
    Are you referring to the ear speaker or main speaker?  Phone calls?  Rings/alerts? Music?
    What troublshooting steps did you take?

  • Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad

    Not event 6 month i already got a problem with the sound and i cannot watch youtube or any video using my Ipad. Please help

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Weird noise after locking

    My phone is making this strange noise when I lock it, it starts off slowly and then speeds to a fluid buzzing, and it sounds very close to the noise a cicada makes. It is VERY loud.
    It only started doing it today, and only when I lock my phone. Turning the lock tone off also turns off the buzzing, but I'm worried that something is still wrong with my phone! I don't have very many applications, I recently updated Facebook but that's it.
    If anyone else has this problem, PLEASE let me know!

    I got my new iPhone 4 on the day of the release here in Canada (July 30, 2010). I knew about the antenna problem but I was willing to put on a bumper case to resolve that issue. Anyway, several days after I got the phone, I experienced this very loud weird noise coming out of the speaker every time I either unlocked the phone or locked the phone. Yesterday I experienced the same issue, but this time I decided to record this noise on the Voice Memos application and guess what; as soon as I pressed the record button or the stop button, that same noise was being emitted.
    The problems seem to be piling up and that could explain the shortage of phones here in Canada; perhaps they are resolving manufacture issues. I am ready to take this phone back because it seems like an unfinished product.
    <Edited by Host>

  • Weird constant keychain lock sound?

    Since updating to 10.6.7, I'm getting a constant locking sound of keychain. My Keychains are locked and the lock sound kept going on and on for no apparent reason. Removed all keychains and the lock sound persisted. Looked into Activity Monitor, nothing suspicious. My Mac is protected by anti-virus software by the way.
    What's up with the locking sound. Can't find a fix by googling. Anyone has any idea on this issue and a possible fix?
    Thanks.

    I'm not sure of the cause or solution, but since I replied yesterday, the problem seems to have gone away.
    Prior to making the posting when I first heard the sounds I noticed that I had left 1Password (although locked) and Keychain Access running and thought that might have something do to with it. So i quit them, but still had the noises after the screensaver came on. I even rebooted and still had the problem. I'd hear the sound when the screensaver first came on and then periodically after that.
    After posting yesterday, I checked settings in System Preferences and Keychain Access that might have to do with keychain locking and unlocking. I didn't see anything unusual and I'm pretty sure that I didn't change anything, but since that time I haven't been hearing the sound. I've even left 1Password and Keychain Access running and the problem hasn't reoccurred.
    I don't know if System Preferences or Keychain Access changed something behind the scenes, but it might be worth a try.
    - David

  • LEDs on caps lock, sound and wireless keys are not blinking any more

    I have Pavilion g6 2103 tu notebook with windows 8 OS. The LED s on the caps lock , wireless and sound keys are not blinking for few days. can any one have the solution please?? thanks

    Hi @rajiv29
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I saw your post regarding the LEDs not blinking on your Pavilion. Is there something else wrong with your Pavilion or just that those lights do not come on?
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Audio capture delayed with Java Sound and JWS

    Hi.
    I am experiencing quite a strange problem with Java Sound in my Java Web Start application. I am acquiring sound from the microphone through Java Sound, using a code which looks like this:
    ==============================
    AudioFormat audioFormat = new AudioFormat(11025, 8, 1, true, false);
    // Get a TargetDataLine from the appropriate mixer
    DataLine.Info dataLineInfo = new DataLine.Info(TargetDataLine.class, audioFormat);
    TargetDataLine targetDataLine = (TargetDataLine) AudioSystem.getLine(dataLineInfo);
    // Prepare the line for use
    targetDataLine.open(audioFormat);
    targetDataLine.start();
    targetDataLine.addLineListener(myLineListener);
    // Build an input stream from the line
    AudioInputStream audioInStream = new AudioInputStream(targetDataLine);
    // Create the output file
    File outputFile = new File("C:\\MySampleAudioFile.wav");
    // Start the actual audio file-writing operation
    AudioFileFormat.Type targetFileFormatType = AudioFileFormat.Type.WAVE;
    AudioSystem.write(audioInStream, targetFileFormatType, outputFile);
    ==============================
    This code is executed in an independent thread. As you can see from the code reported above, I add a LineListener to my TargetDataLine.
    The problem is that in my JWS application several seconds (about 5-6 seconds) elapse from the call to AudioSystem.write() and the reception of the START LineEvent on my LineListener. This delay only occurs when my JWS application is downloaded from my public internet website, while it is not present when I test my JWS application on my local LAN server.
    It looks like the call to AudioSystem.write() causes some kind of network connection to the remote web server of the JWS app, and this operation takes some time. In fact, if I download my JWS app to my client from the public web server, then I disable all network connections on my client, then the START event is received immediately after the call to AudioSystem.write()... This is STRANGE, isn't it???
    Do you believe the call to AudioSystem.write(), or any other Java Sound call, may cause a network connection to the server from which the JWS application has been downloaded?
    A final addition to the above picture: I also have a "Java Applet" version of this application, which is exactly identical to the JWS version and uses the same exact code to do audio acquisition from the microphone. But, in this case the delay is not present, even when running the applet from the public web server!
    Any help / suggestion would be highly appreciated.
    Best regards,
    Marco.

    Hi
    Just Visit the following link and download sample source code for rtp in java
    http://javasolution.blogspot.com/2007/04/rtp-using-java.html
    if u want know basic simple java voice chat then visit
    http://javasolution.blogspot.com/2007/04/voice-chat-using-java.html

  • I bought an iphone 3 with locking ios7 and not against the previous owner

    I bought an iphone 4 with 3 locking ios7 and not think previous owner, what do I do now

    Welcome to the user to User Technical Support Forum provided by Apple.
    juliane79 wrote:
    I bought an iphone 4 with 3 locking ios7 and not think previous owner, what do I do now
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.

  • Air Port signal interferring with Surround Sound Wireless Speakers

    I have a Samsung Surround Sound Setup with 2 rear wireless speakers.
    I can't use my wireless internet while the surround sound is on.
    Is there anything to do with the air port utility to get the signal on a different channel?
    Please help!

    I believe these Samsung's wireless rear speakers rely on Bluetooth technology which runs in the same radio band as 2.4 GHz Wi-Fi. To eliminate any interference, you should consider either operating your AirPort in the 5 GHz band of try changing radio channels if you must operate it in the 2.4 GHz band.

Maybe you are looking for

  • How to use classes from different user defined Packages

    well i made 2 packages... one containing employee class and realted matter and other contaning bankaccounts and bank related work... now how can i use them in an another.. i know about the import statement but still couldn't make it work.... now supp

  • How do I add files with same name to a folder

    I have photos with the same name and want to add all to the same folder.  I dont want to have to manually change the nams is there an easy way to do this.  In windows I would have the option to keep both and it would change the extn of one of the fil

  • Update Failed - U44M1l210 error

    Creative cloud 2014 - All programs updated except for Illustrator. I get the following error: Update Failed Unable to extract downloaded files. Press Retry to download again. (U44M1l210) Any idea what I need to do here? -Thanks in advance. -C

  • Internet Explorer Help.

    Hi there, My wife is being given the facility to work from home and as such has to have internet explorer installed on our Mac! We already have Windows installed on the laptop and wonder how we would access that if we boot camped the hard drive. Many

  • ICloud Options All Greyed Out.

    Hi Fellas, Ever since i upgraded to Yosemite my iCloud has been messing up. It shows i'm signed in but won't display further details like used & unused space in my quota. It also doesn't let me set up family neither does it let me check or uncheck op