Weird Non-Start Issue
I've been experiencing an occasional system freeze where the system locks up completely and if I'm listening to music it repeats the same note until force restarted.
Anyway, it hasn't happened the past few days and I was feeling confident my computer was ok.
So tonight I go to shut the MBP off and this time it took forever. 2+ minutes of just spinning and spinning at the shutdown screen.
Finally it shut down and I took it to class where it wouldn't completely turn on again. It wouldn't get past a black screen and nothing seemed to help. After class I came home and tried to target-disk-mode onto my girlfriend's MacBook, which it did no problem, except the MBP still had a black screen and none of the backlighting, caps lock key light, etc worked.
I disconnected the MBP after copying my files over and I realized I had forgotten my Mail database, so I re-connected it and booted into target-disk mode and the computer came back to life, and has worked flawlessly ever since.
I really don't trust the computer anymore, should I take it in for service?
Message was edited by: SMG87
So I shut the MBP down overnight and it didn't boot up this morning. So, I tried doing target disk mode to my spare MacBook, disconnected and did target disk mode again.
Sure enough, just like last time the second target disk mode brought it back to life!
Does this sound like a hardware problem where the fix is 100% reproducible?
Similar Messages
-
H61M-P20 G3 motherboard 99 code shown right-below, non start
Hi, I bought yesterday a MSI H61M-P20 G3 mainboard, with Kingston KHX1600C9D3B1/4G - Memory and i3 Intel BX80637I33220 - Core I3-3220 processor. PS2 Keyboard and Mouse.
I have installed Window 7 32 bits, and sometimes when I turn it ON or restarting it, system doesn't starts it shows a black screen with a 99 code below at right side of the screen.
Its very strange because it doesn't happens always, also I have tried with the attached elements (keyboard and mouse). I don't know if it has relation or not with this 99 code, but when I disconnect the PS2 keyboard I have restarted and turned OFF many times and 99 code doesn't appears and system starts correctly, I will try today with an USB keyboard.
Could be the keyboard the reason of this 99 code with system non starting issue?
I wanna be sure if the mainboard have a failure to return it as a defectous part.
Thanks in advance.Please start new topic instead of resurrecting old one.
>>Please read and comply with the Forum Rules.<<
Also see >>Posting Guide<< when you start a new topic -
Dequeing from AQ in a non-start activity
Hi everybody,
I have the following pattern:
Process 1:
<process>
<enqueue AQ CorrelationID = '1'/>
</process>
Process 2:
<process>
<receive start activity/>
<dequeue AQ CorrelationID = '1'/> <!-- plus internal BPEL CorrelationSet -->
</process>
The idea behind is that I must dequeue from my AQ in a non-start process activity.
So I tried to setup the AQ adapter with a CorrelationID = 'dynamic' (unused) in the AQ adapter wizard and then to modify the CorrelationID dynamically, at runtime, using the AQ header.
As my activity is not a start activity I have setup also an internal BPEL CorrelationSet based on the AQ payload.
Unfortunately my BPEL process is not consuming any message from the queue.
Is there any way to get this working? How may I dequeue from an AQ in an non-start activity?
I'm using the AQ Adapter from BPEL 10.1.2.0.2. Is there any change in BPEL 10.1.3.1.0 concerning this issue?
Regards,
amoYes you can use your web start application console. To enter data which is required for your application it is better idea to use java application which runs in console mode althou you may try to run console of windows and then read data from its input stream.
-
I am very annoyed at the Creative Cloud set up and the non-stop issues and problems
I am very annoyed at the Creative Cloud set up and the non-stop issues and problems! I am paying monthly for this service and it is constantly failing in some way! So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE! That isn't including the other apps that have had issues! I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging! It is costing me more than just this monthly fee! And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues. Really Adobe?
Adobe contact information - http://helpx.adobe.com/contact.html may help
-
Hi Cooper,
If i enable this script in my environment where everything is maintained as per compliance. If i will install Quest modules then there should not be any non-compliance issue. Means my security team should not raise concern about unlicensed software installed
in MS environment.
Pls confirm so that i can make a decision about this.Hi Kuldeep,
To see who's changed or reset their password, you would have to set AD auditing on each domain controller and specifically look for "Account management." You can do that by setting an audit policy in the Def Domain Controller policy so it
will apply to all DCs. Then you must check the Security log on each DC. The problem with that is you don't know which DC to check. A centralized tool would be better to use, such as SCOM or a third party tool, such as the Quest tool, which you already have.
AD DS Auditing Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc731607(v=ws.10).aspx
And you are already aware of the Quest tool:
Change Auditor for Active Directory
http://www.quest.com/change-auditor-for-active-directory/
For more info, you take a look at this thread where it was heavily discussed for more info and ideas:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/71c70e49-b0c0-46a2-885d-38d36c704e5a/active-directory-password-reset-event
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
my ipad crashed, (email chrashed actually), In my try to recover it i try shut down after press the power button 5-8 sec and for about 7-12 hours showned a circle trying to shut down. After battery run out shutted down, i try to charge it but during, shows a usb cable with itunes logo and an arrow to get connected, after 8hours charge, when connect to itunes says for :
iPad Recovery Mode
Your ipad software is up to date. iTunes will automatically check for an update again on 11/03/2013. (in a week)
I tried start it like is but non start, is it deleted all from it....?
Ipad 1
3.2 updated to 4.3.3
what can recover if deleted all?
pdfs eBooks are recoverable?The first step of syncing with iTunes is iTunes making a backup. Restore from that backup using the instructions in this article. Your iPad will be like it was when the backup was made.
iTunes: Restoring iOS software
The backup does not included synced media like apps. music and synced photos.
If necessary you can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Do that before restoring from backup -
My Mac Pro crashed in After Effects yesterday. SInce then it will start up in WIndows7 under Boot Camp but won't run properly in OSX. I've swapped out the hard drive for another system drive but I get the Grey Screen of Death, that also happens when I try to boot from the System DVD. I've removed all PCI cards and external devices. Even with no hard disks in at all and just booting from DVD gets the hang screen. I tried PRAM and removed the battery but no joy.
Holding Alt at start up gives me four options.
1 Current system
2 Old System
3 Install DVD
4 Windows Boot Camp
They're all on separate internal drives.
1 Current system lets me login and gets as far as displaying the desktop then either jumps back to the login screen again or crashes to a blue screen and the spinning wheel
2 Old System gives me the Grey screen of death at the apple logo
3 Install DVD gives me the Grey screen of death at the apple logo.
4 Windows boots fine
What's confusing is the that as Windows boots fine it can't be a hardware thing. But if it's a mac system software thing then surely the DVD should boot OK? And how come both system disks don't work suddenly and in different ways?Your OS (I can't find OS minimim requirement) may not boot from DVD or any system that doesn't have drivers, and it may be it requires 10.6.5.
Did you ever boot before with this card and DVD or try with less than 10.6.4?
Still, you have another graphic card either installed or handy, so you can boot w/o the Q4000 installed.
The last SL DVD was only 10.6.3, only $25 @ Amazon if need be.
You / I never boot Disk Warrior from CD, doesn't have drivers, slow, would be an older OS build, etc. which should be v. 4.2+ also.
A couple people commented on Quadro 4000 performance in this thread:
http://discussions.apple.com/thread.jspa?messageID=12758519&
CS5 5.03
Do you have ATI 5770 or 4870 alongside?
Does it work with just the Quadro?
Latest update
http://www.redgiantsoftware.com/products/all/magic-bullet-looks/updates/ -
3 weird ALU iMac issues..
My ALU 20 inch iMac has 2 or 3 weird problems which I'd appreciate feedback on...
1. When I run Maintenance or Onyx they both said my start up has a problem and I need to install the original start up disk and have it repaired. I did so, it checked and said there were NO start up issues.
2. After shutting down for 3 days as I was away on holiday, I came back, started her up and there was the sound of the computer's drive being on but no start up process and nothing on the screen. I turned off for a while, did again, and on the third attempt it started up as normal.
3. Most weird of all, after downloading and watching a TV episode from iTunes, my dock disappeared. I put it to sleep and this morning it is still the same. I can only access Mail and Safari through the 'recent item's drop down menu.
Are these things connected? Why on earth does Onyx say I have a problem when the disk says I don't, and where might my dock be....?Hello and thanks for your reply/
The Maintenance version is 1.2.0 and was just downloaded.
It says "the volume needs to be repaired. To repair your start up disk, start up from your OSX DVD..."
No more specific than that I'm afraid = start up volume?
Thanks. -
Hi,
since we deploy JRE using Software distribution in Active Directory, the msi file provided with the Java installation is not well usable. Not sure, if it is still the case, that triggering the msi file a second time after successfull installation destroys the exisiting Java installation.
So I have built my own msi file for internal deployment using Advanced Installer. Finally all seemed to work (had some intermediate issues with outdated keys in HKCU), but now a new corporate application arrived, which creates a Java Web Start shortcut on the desktop. This shortcut fails to start with the error "Can not find message file".
Not very helpful. I found out, that the shortcut points to the javaws.exe in system32 folder (if I create the shortcut with the Cache Viewer, the same happens). And this javaws.exe file is also bringing up this message if double clicking. If I manually alter the shortcut to point to Program Files\Java\jre6\bin\javaws.exe, the application launches.
So there must be something wrong in my package with the javaws.exe in the Windows system folder. But what? I compared already several registry keys with a non corporate machine, on which I installed from download, and here it functions well, but could not find any visible differences.
Would be nice, if somebody could point me to either a way to fix the javaws.exe file in system32 (without using the downloaded Java installer, which cannot be deployed) or default created shortcuts to point to Program Files\Java instead of Windows\system32.
Thanks and best greetings from Germany
Olaf907297 wrote:
Hi and thanks for the answer.
That is my guess as well. As mentioned I already tried to compare the registry keys related to javaws on two machines and found no visible differences, which would explain, why this functions on one and not on the other. But maybe I simply did not stumble over the needed key.I wonder if there is a way to sniff out which registry keys a native application is referencing. That could also provide some clues into which keys need to be cleaned up to fix a broken JDK installation, which too many people are suffering from. -
Hi All,
We met an issue while try to startup the oracle DB, it seems StartUp failed due to miss of logfile(REDO02.log).
The REDO02.log file was deleted by a mistake and we failed to recover it.
Is there any preferred way to recover Oracle without logfile?
We are getting below error while starting
During steps below, I met some errors.
- Open the database with resetlogs. (Error ORA-01092, Process ID 4084,SessionID 170,Serial 5)
- Shutdown the database (Error ORA-24324, 01041)
Thanks in advance for help.
Blow is log file
Mon Jul 08 10:57:45 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Mon Jul 08 10:57:57 2013
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile C:\APP\PIUSER\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEJODS.ORA
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 816M
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL01.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL02.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "C:\app\piuser\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=JODSXDB)"
audit_file_dest = "C:\APP\PIUSER\ADMIN\JODS\ADUMP"
audit_trail = "DB"
db_name = "JODS"
open_cursors = 300
diagnostic_dest = "C:\APP\PIUSER"
Mon Jul 08 10:58:05 2013
PMON started with pid=2, OS id=1124
Mon Jul 08 10:58:05 2013
VKTM started with pid=3, OS id=768 at elevated priority
Mon Jul 08 10:58:05 2013
DIAG started with pid=4, OS id=760
Mon Jul 08 10:58:05 2013
DBRM started with pid=5, OS id=1144
VKTM running at (20)ms precision
Mon Jul 08 10:58:05 2013
PSP0 started with pid=6, OS id=1140
Mon Jul 08 10:58:05 2013
DIA0 started with pid=7, OS id=1432
Mon Jul 08 10:58:05 2013
MMAN started with pid=8, OS id=816
Mon Jul 08 10:58:05 2013
DBW0 started with pid=9, OS id=1476
Mon Jul 08 10:58:05 2013
LGWR started with pid=10, OS id=1480
Mon Jul 08 10:58:05 2013
CKPT started with pid=11, OS id=1500
Mon Jul 08 10:58:05 2013
SMON started with pid=12, OS id=1504
Mon Jul 08 10:58:05 2013
RECO started with pid=13, OS id=1440
Mon Jul 08 10:58:05 2013
MMON started with pid=14, OS id=1536
Mon Jul 08 10:58:05 2013
MMNL started with pid=15, OS id=1540
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = C:\app\piuser
Mon Jul 08 10:58:11 2013
alter database mount exclusive
Setting recovery target incarnation to 1
Mon Jul 08 10:58:18 2013
Successful mount of redo thread 1, with mount id 3135188995
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Mon Jul 08 10:58:30 2013
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Started redo scan
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_1912.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Aborting crash recovery due to error 313
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_1912.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 10:58:36 2013
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_2128.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv1(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO1 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO01.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_2128.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv2(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO2 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_2128.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv3(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO3 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO03.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 10:58:52 2013
Checker run found 6 new persistent data failures
Mon Jul 08 11:08:30 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile C:\APP\PIUSER\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEJODS.ORA
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 816M
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL01.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL02.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "C:\app\piuser\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=JODSXDB)"
audit_file_dest = "C:\APP\PIUSER\ADMIN\JODS\ADUMP"
audit_trail = "DB"
db_name = "JODS"
open_cursors = 300
diagnostic_dest = "C:\APP\PIUSER"
Mon Jul 08 11:08:31 2013
PMON started with pid=2, OS id=1968
Mon Jul 08 11:08:31 2013
VKTM started with pid=3, OS id=1976 at elevated priority
VKTM running at (20)ms precision
Mon Jul 08 11:08:31 2013
DIAG started with pid=4, OS id=1984
Mon Jul 08 11:08:31 2013
DBRM started with pid=5, OS id=1988
Mon Jul 08 11:08:31 2013
PSP0 started with pid=6, OS id=1992
Mon Jul 08 11:08:31 2013
DIA0 started with pid=7, OS id=1996
Mon Jul 08 11:08:31 2013
MMAN started with pid=8, OS id=2000
Mon Jul 08 11:08:31 2013
DBW0 started with pid=9, OS id=2004
Mon Jul 08 11:08:31 2013
LGWR started with pid=10, OS id=1972
Mon Jul 08 11:08:31 2013
CKPT started with pid=11, OS id=176
Mon Jul 08 11:08:31 2013
SMON started with pid=12, OS id=140
Mon Jul 08 11:08:31 2013
RECO started with pid=13, OS id=220
Mon Jul 08 11:08:31 2013
MMON started with pid=14, OS id=256
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Jul 08 11:08:31 2013
MMNL started with pid=15, OS id=260
starting up 1 shared server(s) ...
ORACLE_BASE from environment = C:\app\piuser
Mon Jul 08 11:08:39 2013
alter database mount exclusive
Setting recovery target incarnation to 1
Mon Jul 08 11:08:46 2013
Successful mount of redo thread 1, with mount id 3135138167
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Mon Jul 08 11:08:57 2013
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Started redo scan
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_592.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 11:09:01 2013
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m001_1552.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv1(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO1 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO01.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Aborting crash recovery due to error 313
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_592.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m001_1552.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv2(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO2 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m001_1552.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv3(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO3 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO03.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 11:31:03 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile C:\APP\PIUSER\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEJODS.ORA
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 816M
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL01.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL02.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "C:\app\piuser\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=JODSXDB)"
audit_file_dest = "C:\APP\PIUSER\ADMIN\JODS\ADUMP"
audit_trail = "DB"
db_name = "JODS"
open_cursors = 300
diagnostic_dest = "C:\APP\PIUSER"
Mon Jul 08 11:31:04 2013
PMON started with pid=2, OS id=2660
Mon Jul 08 11:31:04 2013
VKTM started with pid=3, OS id=2668 at elevated priority
Mon Jul 08 11:31:04 2013
DIAG started with pid=4, OS id=3708
VKTM running at (20)ms precision
Mon Jul 08 11:31:04 2013
DBRM started with pid=5, OS id=2488
Mon Jul 08 11:31:04 2013
PSP0 started with pid=6, OS id=2484
Mon Jul 08 11:31:04 2013
DIA0 started with pid=7, OS id=892
Mon Jul 08 11:31:04 2013
MMAN started with pid=8, OS id=1556
Mon Jul 08 11:31:04 2013
DBW0 started with pid=9, OS id=1552
Mon Jul 08 11:31:04 2013
LGWR started with pid=10, OS id=1216
Mon Jul 08 11:31:04 2013
CKPT started with pid=11, OS id=3704
Mon Jul 08 11:31:04 2013
SMON started with pid=12, OS id=3916
Mon Jul 08 11:31:04 2013
RECO started with pid=13, OS id=3080
Mon Jul 08 11:31:04 2013
MMON started with pid=14, OS id=3844
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = C:\app\piuser
Mon Jul 08 11:31:04 2013
alter database mount exclusive
Mon Jul 08 11:31:04 2013
MMNL started with pid=15, OS id=2656
Setting recovery target incarnation to 1
Successful mount of redo thread 1, with mount id 3135182264
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Started redo scan
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_2504.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Aborting crash recovery due to error 313
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_2504.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Mon Jul 08 11:31:12 2013
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_500.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv1(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO1 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO01.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_500.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv2(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO2 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_500.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv3(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO3 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO03.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 11:36:56 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile C:\APP\PIUSER\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEJODS.ORA
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 816M
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL01.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL02.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "C:\app\piuser\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=JODSXDB)"
audit_file_dest = "C:\APP\PIUSER\ADMIN\JODS\ADUMP"
audit_trail = "DB"
db_name = "JODS"
open_cursors = 300
diagnostic_dest = "C:\APP\PIUSER"
Mon Jul 08 11:36:57 2013
PMON started with pid=2, OS id=620
Mon Jul 08 11:36:57 2013
VKTM started with pid=3, OS id=624 at elevated priority
VKTM running at (20)ms precision
Mon Jul 08 11:36:57 2013
DIAG started with pid=4, OS id=628
Mon Jul 08 11:36:57 2013
DBRM started with pid=5, OS id=632
Mon Jul 08 11:36:57 2013
PSP0 started with pid=6, OS id=568
Mon Jul 08 11:36:57 2013
DIA0 started with pid=7, OS id=644
Mon Jul 08 11:36:57 2013
MMAN started with pid=8, OS id=652
Mon Jul 08 11:36:57 2013
DBW0 started with pid=9, OS id=672
Mon Jul 08 11:36:57 2013
LGWR started with pid=10, OS id=572
Mon Jul 08 11:36:57 2013
CKPT started with pid=11, OS id=176
Mon Jul 08 11:36:57 2013
SMON started with pid=12, OS id=680
Mon Jul 08 11:36:57 2013
RECO started with pid=13, OS id=668
Mon Jul 08 11:36:57 2013
MMON started with pid=14, OS id=664
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Jul 08 11:36:57 2013
MMNL started with pid=15, OS id=608
starting up 1 shared server(s) ...
ORACLE_BASE from environment = C:\app\piuser
Mon Jul 08 11:37:05 2013
alter database mount exclusive
Setting recovery target incarnation to 1
Mon Jul 08 11:37:13 2013
Successful mount of redo thread 1, with mount id 3135129377
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Mon Jul 08 11:37:25 2013
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Started redo scan
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_1268.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 11:37:31 2013
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m001_116.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv1(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO1 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO01.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Aborting crash recovery due to error 313
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_1268.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m001_116.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv2(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO2 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m001_116.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv3(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO3 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO03.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 11:38:19 2013
Exception [type: ACCESS_VIOLATION, UNABLE_TO_WRITE] [ADDR:0x650051] [PC:0x7C9106C3, {empty}]
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_3148.trc (incident=84677):
ORA-07445: —áŠO‚ªŒŸo‚³‚ê‚Ü‚µ‚½: ƒRƒAEƒ_ƒ“ƒv [PC:0x7C9106C3] [ACCESS_VIOLATION] [ADDR:0x650051] [PC:0x7C9106C3] [UNABLE_TO_WRITE] []
Incident details in: c:\app\piuser\diag\rdbms\jods\jods\incident\incdir_84677\jods_ora_3148_i84677.trc
Mon Jul 08 11:53:50 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile C:\APP\PIUSER\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEJODS.ORA
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 816M
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL01.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL02.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "C:\app\piuser\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=JODSXDB)"
audit_file_dest = "C:\APP\PIUSER\ADMIN\JODS\ADUMP"
audit_trail = "DB"
db_name = "JODS"
open_cursors = 300
diagnostic_dest = "C:\APP\PIUSER"
Mon Jul 08 11:53:51 2013
PMON started with pid=2, OS id=1964
Mon Jul 08 11:53:51 2013
VKTM started with pid=3, OS id=728 at elevated priority
VKTM running at (20)ms precision
Mon Jul 08 11:53:51 2013
DIAG started with pid=4, OS id=1980
Mon Jul 08 11:53:51 2013
DBRM started with pid=5, OS id=1992
Mon Jul 08 11:53:51 2013
PSP0 started with pid=6, OS id=1996
Mon Jul 08 11:53:51 2013
DIA0 started with pid=7, OS id=2000
Mon Jul 08 11:53:51 2013
MMAN started with pid=8, OS id=2032
Mon Jul 08 11:53:51 2013
DBW0 started with pid=9, OS id=2024
Mon Jul 08 11:53:51 2013
LGWR started with pid=10, OS id=1968
Mon Jul 08 11:53:51 2013
CKPT started with pid=11, OS id=192
Mon Jul 08 11:53:51 2013
SMON started with pid=12, OS id=140
Mon Jul 08 11:53:51 2013
RECO started with pid=13, OS id=212
Mon Jul 08 11:53:51 2013
MMON started with pid=14, OS id=252
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Jul 08 11:53:51 2013
MMNL started with pid=15, OS id=256
starting up 1 shared server(s) ...
ORACLE_BASE from environment = C:\app\piuser
Mon Jul 08 11:53:51 2013
alter database mount exclusive
Mon Jul 08 11:53:55 2013
Sweep Incident[84677]: completed
Setting recovery target incarnation to 1
Successful mount of redo thread 1, with mount id 3135138319
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Mon Jul 08 11:54:09 2013
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Started redo scan
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_480.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Aborting crash recovery due to error 313
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_480.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 11:54:15 2013
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1292.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv1(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO1 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO01.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1292.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv2(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO2 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1292.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv3(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO3 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO03.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 11:57:20 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 11:57:21
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.177)(PORT=2880))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 12:00:11 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 12:00:11
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.177)(PORT=3320))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 12:02:53 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 12:02:53
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.177)(PORT=3443))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 12:08:49 2013
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Jul 08 12:23:15 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 12:23:16
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.177)(PORT=3867))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 12:43:07 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 12:43:07
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.177)(PORT=4825))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 13:10:09 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 13:10:09
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.12.133)(PORT=1578))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 13:10:32 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 13:10:32
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.177)(PORT=2457))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 13:12:38 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 13:12:38
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.43)(PORT=2543))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 13:13:48 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 13:13:48
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.43)(PORT=2694))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 13:18:39 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 13:18:39
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.12.217)(PORT=2969))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 14:04:24 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile C:\APP\PIUSER\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEJODS.ORA
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 816M
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL01.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL02.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "C:\app\piuser\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=JODSXDB)"
audit_file_dest = "C:\APP\PIUSER\ADMIN\JODS\ADUMP"
audit_trail = "DB"
db_name = "JODS"
open_cursors = 300
diagnostic_dest = "C:\APP\PIUSER"
Mon Jul 08 14:04:25 2013
PMON started with pid=2, OS id=608
Mon Jul 08 14:04:25 2013
VKTM started with pid=3, OS id=2972 at elevated priority
Mon Jul 08 14:04:25 2013
DIAG started with pid=4, OS id=2660
Mon Jul 08 14:04:25 2013
DBRM started with pid=5, OS id=3032
VKTM running at (20)ms precision
Mon Jul 08 14:04:25 2013
PSP0 started with pid=6, OS id=3768
Mon Jul 08 14:04:25 2013
MMAN started with pid=8, OS id=2092
Mon Jul 08 14:04:26 2013
DBW0 started with pid=9, OS id=3312
Mon Jul 08 14:04:26 2013
SMON started with pid=12, OS id=4056
Mon Jul 08 14:04:26 2013
CKPT started with pid=11, OS id=3356
Mon Jul 08 14:04:26 2013
LGWR started with pid=10, OS id=1664
Mon Jul 08 14:04:26 2013
RECO started with pid=13, OS id=3012
Mon Jul 08 14:04:26 2013
MMON started with pid=14, OS id=384
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
ORACLE_BASE from environment = C:\app\piuser
Mon Jul 08 14:04:27 2013
alter database mount exclusive
Mon Jul 08 14:04:25 2013
DIA0 started with pid=7, OS id=3060
Mon Jul 08 14:04:26 2013
MMNL started with pid=15, OS id=2432
Setting recovery target incarnation to 1
Successful mount of redo thread 1, with mount id 3135153323
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Started redo scan
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_1412.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Aborting crash recovery due to error 313
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_1412.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 14:04:34 2013
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1408.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv1(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO1 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO01.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1408.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv2(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO2 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1408.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv3(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO3 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO03.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 14:06:08 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 14:06:08
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.43)(PORT=1932))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 14:06:56 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 14:06:56
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.13.177)(PORT=3560))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 14:07:21 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 14:07:21
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.12.217)(PORT=2896))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 14:19:31 2013
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Jul 08 14:42:27 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile C:\APP\PIUSER\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEJODS.ORA
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 816M
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL01.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL02.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "C:\app\piuser\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=JODSXDB)"
audit_file_dest = "C:\APP\PIUSER\ADMIN\JODS\ADUMP"
audit_trail = "DB"
db_name = "JODS"
open_cursors = 300
diagnostic_dest = "C:\APP\PIUSER"
Mon Jul 08 14:42:28 2013
PMON started with pid=2, OS id=644
Mon Jul 08 14:42:28 2013
VKTM started with pid=3, OS id=648 at elevated priority
VKTM running at (20)ms precision
Mon Jul 08 14:42:28 2013
DIAG started with pid=4, OS id=652
Mon Jul 08 14:42:28 2013
DBRM started with pid=5, OS id=656
Mon Jul 08 14:42:28 2013
PSP0 started with pid=6, OS id=660
Mon Jul 08 14:42:28 2013
DIA0 started with pid=7, OS id=664
Mon Jul 08 14:42:28 2013
MMAN started with pid=8, OS id=668
Mon Jul 08 14:42:28 2013
DBW0 started with pid=9, OS id=672
Mon Jul 08 14:42:28 2013
LGWR started with pid=10, OS id=676
Mon Jul 08 14:42:28 2013
CKPT started with pid=11, OS id=680
Mon Jul 08 14:42:28 2013
SMON started with pid=12, OS id=684
Mon Jul 08 14:42:28 2013
RECO started with pid=13, OS id=688
Mon Jul 08 14:42:28 2013
MMON started with pid=14, OS id=692
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Jul 08 14:42:28 2013
MMNL started with pid=15, OS id=696
starting up 1 shared server(s) ...
ORACLE_BASE from environment = C:\app\piuser
Mon Jul 08 14:42:28 2013
alter database mount exclusive
Setting recovery target incarnation to 1
Successful mount of redo thread 1, with mount id 3135170709
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Mon Jul 08 14:42:38 2013
Started redo scan
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_708.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Aborting crash recovery due to error 313
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_ora_708.trc:
ORA-00313: ???????2(????1)????????????????
ORA-00312: ????????2 ????1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ???????????????
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-313 signalled during: alter database open...
Mon Jul 08 14:42:43 2013
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1464.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv1(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO1 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO01.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1464.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv2(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO2 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO02.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file c:\app\piuser\diag\rdbms\jods\jods\trace\jods_m000_1464.trc:
ORA-00313: ƒƒOEƒOƒ‹[ƒv3(ƒXƒŒƒbƒh1)‚̃ƒ“ƒo[‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
ORA-00312: ƒIƒ“ƒ‰ƒCƒ“EƒƒO3 ƒXƒŒƒbƒh1: 'C:\APP\PIUSERJODSDATA\JODS\REDO03.LOG'
ORA-27041: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñB
OSD-04002: ƒtƒ@ƒCƒ‹‚ðƒI[ƒvƒ“‚Å‚«‚Ü‚¹‚ñ
O/S-Error: (OS 2) The system cannot find the file specified.
Mon Jul 08 14:57:10 2013
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Jul 08 15:14:54 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 15:14:54
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.12.141)(PORT=49972))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 15:16:13 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 15:16:13
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.12.217)(PORT=2335))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 15:20:44 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 15:20:44
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.12.133)(PORT=2901))
WARNING: inbound connection timed out (ORA-3136)
Mon Jul 08 15:25:31 2013
Shutting down instance: further logons disabled
Stopping background process MMNL
Mon Jul 08 15:25:32 2013
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.7.0 - Production
Time: 08-7ŒŽ -2013 15:25:32
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS: ‘€ì‚̓^ƒCƒ€EƒAƒEƒg‚µ‚Ü‚µ‚½B
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.240.12.141)(PORT=50029))
WARNING: inbound connection timed out (ORA-3136)
Stopping background process MMON
Shutting down instance (immediate)
License high water mark = 3
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon Jul 08 15:25:42 2013
alter database close normal
ORA-1109 signalled during: alter database close normal...
Mon Jul 08 15:25:51 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 11.1.0.7.0.
Using parameter settings in server-side spfile C:\APP\PIUSER\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEJODS.ORA
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 816M
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL01.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL02.CTL"
control_files = "C:\APP\PIUSERJODSDATA\JODS\CONTROL03.CTL"
db_block_size = 8192
compatible = "11.1.0.0.0"
db_recovery_file_dest = "C:\app\piuser\flash_recovery_area"
db_recovery_file_dest_size= 2G
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=JODSXDB)"
audit_file_dest = "C:\APP\PIUSER\ADMIN\JODS\ADUMP"
audit_trail = "DB"
db_name = "JODS"
open_cursors = 300
diagnostic_dest = "C:\APP\PIUSER"
Mon Jul 08 15:25:51 2013
PMON started with pid=2, OS id=772
Mon Jul 08 15:25:51 2013
VKTM started with pid=3, OS id=2184 at elevated priority
Mon Jul 08 15:25:51 2013
DIAG started with pid=4, OS id=3144
Mon Jul 08 15:25:51 2013
DBRM started with pid=5, OS id=1400
Mon Jul 08 15:25:51 2013
PSP0 started with pid=6, OS id=1224
VKTM running at (20)ms precision
Mon Jul 08 15:25:51 2013
DIA0 started with pid=7, OS id=3972
Mon Jul 08 15:25:51 2013
MMAN started with pid=8, OS id=2176
Mon Jul 08 15:25:52 2013
DBW0 started with pid=9, OS id=2192
Mon Jul 08 15:25:52 2013
LGWR started with pid=10, OS id=1436
Mon Jul 08 15:25:52 2013
CKPT started with pid=11, OS id=1184
Mon Jul 08 15:25:52 2013
SMON started with pid=12, OS id=2212
Mon Jul 08 15:25:52 2013
RECO started with pid=13, OS id=2220
Mon Jul 08 15:25:52 2013
MMON started with pid=14, OS id=1064
starting up 1 dispatcher(s) for network address '(ADDRESS=(PART0ec8b977-1bd9-4d21-9445-847d9325fe4c wrote:
Looking for an advice !!
Three pieces of advice.
First, you posted this plea less than an hour after your initial post.
This forum is not a chat line, and it is not paid support.
Everyone here has a job for which they are paid, and this forum is not it.
No one is responsible for monitoring it and giving a quick response.
Furthermore, it is a global forum. The person with the information you seek may very well live 20 time zones away from you and was going to bed just as you posted. He will not even see your post for several more hours.
Your original post went up in the middle of the night for half the world.
No one with the information you seek is deliberately withholding it until you sound sufficiently desperate.
Second, it is not necessary to post three days worth of alert log. Just the one startup sequence , to the point of the error, would have been sufficient.
Third, edit your profile to give yourself a recognizable name. Participating in the community with a system generated name is like going to the pub with a bag over your head. -
I've having weird issues with my T500 LCD. Whenever I run certain apps, all the icons on the desktop (that I can see) flicker until either A) I close the app B) it resolves itself and loads. This issue seems to always happen when the app I'm using has a splash screen (basically a small square image in the center saying I'm loading app X) I'm updating the drivers and hoping that this resolves the issue.
I don't know what is causing the issue and I don't know know when its started.
T500, Win XP Ati HD 3650.
(NOTE: The apps DO work on other machines... )
EDIT: No luck, the weird screen issue is still happening.
T500 2081 CTO ~ T9600 2.8GHz ~ WXP Pro 32bit ~ WSXGA+ 15.4 LED ~ATI 3650 ~ 4GB DDR3 RAM ~ 500GB WD 7200rpm
Camera ~ AT&T WWAN ~ CD/DVD Combo Drive ~ Intel WiFi 5300 AGNwhat if you switch to the intel gpu mode?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Application server B.I start issue
Good Morning,
Kindly help out on this issue , i tried starting the services on the Application server for the infrastructure tier of my B.I.
and i get this error, i have checked my /etc/host file and i can find 127.0.0.1 localhost loopback
-a:applprod$opmnctl startall
opmnctl: starting opmn and all managed processes...
Failed to get IP for -a (239)
Failed to get IP for -a (239)
Failed to get IP for -a (239)
opmnctl: opmn start failed
-a:applprod$./opmnctl start
Failed to get IP for -a (239)
Failed to get IP for -a (239)
Failed to get IP for -a (239)
opmnctl: opmn start failed
-a:applprod$./opmnctl status
Processes in Instance: biprod.crmdbts1.gtbplc.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 20116 | Alive
OC4J | OC4J_SECURITY | 20093 | Alive
HTTP_Server | HTTP_Server | 20088 | Alive
OID | OID | 0 | NONE
I have and checked the opmn file,but nothing seems to be wrong
Kindly help with your ideas
Regards
Edited by: user12025130 on Feb 23, 2010 12:12 AM
Edited by: user12025130 on Feb 23, 2010 12:12 AMi now have this as error after trying to resolve issue , kindly help out:
opmnctl: starting opmn and all managed processes...
==============================================================================
opmn id=crmdbts1:6200
2 of 3 processes started.
ias-instance id=biprod.crmdbts1.gtbplc.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/OC4J_SECURITY/default_island
Error
--> Process (pid=0)
oid dependency failed
OID
failed to start a managed process because a dependency check failed
Log:
none -
Viper Remote Start Issues 2012 Chrysler 300
I had a Viper remote start installed in my 2012 Chrysler 300. The price and installation went great. Scott at the Best Buy in Novi, MI is great. My issue is that yesterday (12/12/14) when you start the car with or without the remote start there is a thumping noise inside the dash towards the passenger side. It sounds like something is spinning and thumping on something. It will do this for 45-60 seconds then stop.
The remote start still works and it does not affect anything else. I'm going to call the store this week but I wanted to see if this has come up before.
Thanks!weird, yeah unfortunately without seeing the vehicle and running through some troubleshooting, there is an infinite number of possibilities that could be wrong. If it is doing that only on remote start i would say that there is a problem, but since it is doing it with the key also, it is more than likely nothing with the remote start or the installation. You can definately take it into the local bby for further diagnosis, but once the tech sees that it isn't anything with the remote start then he will send you to a dealership or someone who can fix that issue. Sorry i couldn't be more help, but bring it back into the shop for a diagnosis, and if it out of our hands then the tech will send you off to another person to get it fixed. best of luck!
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.*** -
OVMAPI_4004E Server Failed Command:- NFS repo VM starting issue
Hi
I have setup a POC environment on OVM 3.1.1 with two OVS servers mapped to a cluster and one OVM server managing these servers . I have mapped a 600GB iscsi LUN as well as a 300GB NFS mount on both the OVS servers.
I created 2 VM's with the iscsi LUN mapped as the storage repo and VM's seem to be working fine
The issue that I am facing is with one of VM's on the NFS mount. I created a VM ( win2k3nfs01) on one of the servers (englabbld10) and mapped the NFS mount as the storage repository. The issue that I am facing is that I am not able to start the VM on the server englabbld10 I get the error which I have mentioned below, but if I migrate the VM to the other server englabbld09 I am able to start the VM. I am enclosing the error details of englabbld10.
The VM’s with iscsi repository work perfectly fine in englabbld10, I can migrate start stop the same.
I have cross validated the nfs permission, DNS records etc. Everything seems to be just fine.
Please help in resolve the same
Job Construction Phase
begin()
Appended operation 'Virtual Machine Start' to object '0004fb0000060000ff2b96ea9cc79078 (win2k3nfs01)'.
Appended operation 'Bridge Configure Operation' to object '0004fb00002000005e3d744bbd8de7da (network.BondPort (1) in englabbld10)'.
Appended operation 'VM Set HA' to object '0004fb0000060000ff2b96ea9cc79078 (win2k3nfs01)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [VirtualMachine] 0004fb0000060000ff2b96ea9cc79078 (win2k3nfs01)
Operation: Virtual Machine Start
Operation: VM Set HA
Object (IN_USE): [VmDiskMapping] 0004fb0000130000f8a0f77cdb2d1976
Object (IN_USE): [VirtualCdrom] 0004fb000015000066df9e28a1f4976e.iso (win2k3_64bit.iso)
Object (IN_USE): [Vnic] 0004fb00000700003454c955f4b4660b (00:21:f6:00:00:00)
Object (IN_USE): [BondPort] 0004fb00002000005e3d744bbd8de7da (network.BondPort (1) in englabbld10)
Operation: Bridge Configure Operation
Object (IN_USE): [VmDiskMapping] 0004fb000013000008cf2ea56564db67
Object (IN_USE): [VirtualDisk] 0004fb00001200006e9c05a32bf7ad47.img (win2k3vm02)
Job Running Phase at 09:50 on Wed, Jan 16, 2013
Job Participants: [ff:20:00:08:ff:ff:ff:ff:ff:ff:48:0f:bc:28:21:00 (englabbld10)]
Actioner
Starting operation 'Virtual Machine Start' on object '0004fb0000060000ff2b96ea9cc79078 (win2k3nfs01)'
Completed operation 'Virtual Machine Start' completed with direction ==> LATER
Starting operation 'Bridge Configure Operation' on object '0004fb00002000005e3d744bbd8de7da (network.BondPort (1) in englabbld10)'
Bridge [206.236.134.0] already exists (and should exist) on interface [bond0] on server [englabbld10]; skipping bridge creation
Completed operation 'Bridge Configure Operation' completed with direction ==> DONE
Starting operation 'VM Set HA' on object '0004fb0000060000ff2b96ea9cc79078 (win2k3nfs01)'
Completed operation 'VM Set HA' completed with direction ==> LATER
Starting operation 'Virtual Machine Start' on object '0004fb0000060000ff2b96ea9cc79078 (win2k3nfs01)'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: englabbld10 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000e40574ce6f97e906 0004fb0000060000ff2b96ea9cc79078, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg'] failed (1): stderr: Error: Unable to open config file: /OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg
stdout: Usage: xm create [options] [vars]
Create a domain based on .
Options:
-h, --help Print this help.
--help_config Print the available configuration variables (vars)
for the configuration script.
-q, --quiet Quiet.
--path=PATH Search path for configuration scripts. The value of
PATH is a colon-separated directory list.
-f=FILE, --defconfig=FILE
Use the given Python configuration script.The
configuration script is loaded after arguments have
been processed. Each command-line option sets a
configuration variable named after its long option
name, and these variables are placed in the
environment of the script before it is loaded.
Variables for options that may be repeated have list
values. Other variables can be set using VAR=VAL on
the command line. After the script is loaded, option
values that were not set on the command line are
replaced by the values set in the script.
-F=FILE, --config=FILE
Domain configuration to use (SXP).
SXP is the underlying configuration format used by
Xen.
SXP configurations can be hand-written or generated
from Python configuration scripts, using the -n
(dryrun) option to print the configuration.
-n, --dryrun Dry run - prints the resulting configuration in SXP
but does not create the domain.
-x, --xmldryrun XML dry run - prints the resulting configuration in
XML but does not create the domain.
-s, --skipdtd Skip DTD checking - skips checks on XML before
creating. Experimental. Can decrease create time.
-p, --paused Leave the domain paused after it is created.
-c, --console_autoconnect
Connect to the console after the domain is created.
--vncviewer Connect to the VNC display after the domain is
created.
--vncviewer-autopass Pass VNC password to viewer via stdin and -autopass.
[options] [vars]
Create a domain.
Domain creation parameters can be set by command-line switches, from
a python configuration script or an SXP config file. See documentation
for defconfig, config. Configuration variables can be set using
VAR=VAL on the command line. For example vmid=3 sets vmid to 3.
Wed Jan 16 09:50:04 IST 2013...
Wed Jan 16 09:50:04 IST 2013
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAsyncAction(ManagedObjectDbImpl.java:1002)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAsyncAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:596)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1012)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000e40574ce6f97e906 0004fb0000060000ff2b96ea9cc79078, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg'] failed (1): stderr: Error: Unable to open config file: /OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg
stdout: Usage: xm create [options] [vars]
Create a domain based on .
Options:
-h, --help Print this help.
--help_config Print the available configuration variables (vars)
for the configuration script.
-q, --quiet Quiet.
--path=PATH Search path for configuration scripts. The value of
PATH is a colon-separated directory list.
-f=FILE, --defconfig=FILE
Use the given Python configuration script.The
configuration script is loaded after arguments have
been processed. Each command-line option sets a
configuration variable named after its long option
name, and these variables are placed in the
environment of the script before it is loaded.
Variables for options that may be repeated have list
values. Other variables can be set using VAR=VAL on
the command line. After the script is loaded, option
values that were not set on the command line are
replaced by the values set in the script.
-F=FILE, --config=FILE
Domain configuration to use (SXP).
SXP is the underlying configuration format used by
Xen.
SXP configurations can be hand-written or generated
from Python configuration scripts, using the -n
(dryrun) option to print the configuration.
-n, --dryrun Dry run - prints the resulting configuration in SXP
but does not create the domain.
-x, --xmldryrun XML dry run - prints the resulting configuration in
XML but does not create the domain.
-s, --skipdtd Skip DTD checking - skips checks on XML before
creating. Experimental. Can decrease create time.
-p, --paused Leave the domain paused after it is created.
-c, --console_autoconnect
Connect to the console after the domain is created.
--vncviewer Connect to the VNC display after the domain is
created.
--vncviewer-autopass Pass VNC password to viewer via stdin and -autopass.
[options] [vars]
Create a domain.
Domain creation parameters can be set by command-line switches, from
a python configuration script or an SXP config file. See documentation
for defconfig, config. Configuration variables can be set using
VAR=VAL on the command line. For example vmid=3 sets vmid to 3.
Wed Jan 16 09:50:04 IST 2013
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 40 more
FailedOperationCleanup
Starting failed operation 'Virtual Machine Start' cleanup on object 'win2k3nfs01'
Complete rollback operation 'Virtual Machine Start' completed with direction=win2k3nfs01
Rollbacker
Executing rollback operation 'Virtual Machine Start' on object '0004fb0000060000ff2b96ea9cc79078 (win2k3nfs01)'
Complete rollback operation 'Virtual Machine Start' completed with direction=DONE
Executing rollback operation 'Bridge Configure Operation' on object '0004fb00002000005e3d744bbd8de7da (network.BondPort (1) in englabbld10)'
Complete rollback operation 'Bridge Configure Operation' completed with direction=DONE
Objects To Be Rolled Back
Object (IN_USE): [VirtualMachine] 0004fb0000060000ff2b96ea9cc79078 (win2k3nfs01)
Object (IN_USE): [VmDiskMapping] 0004fb0000130000f8a0f77cdb2d1976
Object (IN_USE): [VirtualCdrom] 0004fb000015000066df9e28a1f4976e.iso (win2k3_64bit.iso)
Object (IN_USE): [Vnic] 0004fb00000700003454c955f4b4660b (00:21:f6:00:00:00)
Object (IN_USE): [BondPort] 0004fb00002000005e3d744bbd8de7da (network.BondPort (1) in englabbld10)
Object (IN_USE): [VmDiskMapping] 0004fb000013000008cf2ea56564db67
Object (IN_USE): [VirtualDisk] 0004fb00001200006e9c05a32bf7ad47.img (win2k3vm02)
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=12116 method=addTransactionIdentifier accessLevel=6
Class=VirtualMachineDbImpl vessel_id=10564 method=start accessLevel=6
Class=VnicDbImpl vessel_id=2129 method=lock accessLevel=6
Class=VirtualCdromDbImpl vessel_id=9293 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=10585 method=lock accessLevel=6
Class=VnicDbImpl vessel_id=2129 method=lock accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=10592 method=lock accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=10597 method=lock accessLevel=6
Class=VirtualCdromDbImpl vessel_id=9293 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=10585 method=lock accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=12125 method=notify accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=12125 method=setDescription accessLevel=6
Class=BondPortDbImpl vessel_id=1473 method=addJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=12116 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=12116 method=setAssociatedHandles accessLevel=6
Class=InternalJobDbImpl vessel_id=12116 method=setTuringMachineFlag accessLevel=6
Class=VirtualMachineDbImpl vessel_id=10564 method=setCurrentOperationToLater accessLevel=6
Class=InternalJobDbImpl vessel_id=12116 method=setTuringMachineFlag accessLevel=6
Class=BondPortDbImpl vessel_id=1473 method=setCurrentJobOperationComplete accessLevel=6
Class=BondPortDbImpl vessel_id=1473 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=12116 method=setTuringMachineFlag accessLevel=6
Class=VirtualMachineDbImpl vessel_id=10564 method=setCurrentOperationToLater accessLevel=6
Class=InternalJobDbImpl vessel_id=12116 method=setTuringMachineFlag accessLevel=6
Class=VirtualMachineDbImpl vessel_id=10564 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=12116 method=setFailedOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=10564 method=nextJobOperation accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=10597 method=nextJobOperation accessLevel=6
Class=VirtualCdromDbImpl vessel_id=9293 method=nextJobOperation accessLevel=6
Class=VnicDbImpl vessel_id=2129 method=nextJobOperation accessLevel=6
Class=BondPortDbImpl vessel_id=1473 method=nextJobOperation accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=10592 method=nextJobOperation accessLevel=6
Class=VirtualDiskDbImpl vessel_id=10585 method=nextJobOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=10564 method=nextJobOperation accessLevel=6
Class=BondPortDbImpl vessel_id=1473 method=nextJobOperation accessLevel=6
Completed Step: ROLLBACK
Job failed commit (internal) due to OVMAPI_4010E Attempt to send command: dispatch to server: englabbld10 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000e40574ce6f97e906 0004fb0000060000ff2b96ea9cc79078, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg'] failed (1): stderr: Error: Unable to open config file: /OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg
stdout: Usage: xm create [options] [vars]
Create a domain based on .
Options:
-h, --help Print this help.
--help_config Print the available configuration variables (vars)
for the configuration script.
-q, --quiet Quiet.
--path=PATH Search path for configuration scripts. The value of
PATH is a colon-separated directory list.
-f=FILE, --defconfig=FILE
Use the given Python configuration script.The
configuration script is loaded after arguments have
been processed. Each command-line option sets a
configuration variable named after its long option
name, and these variables are placed in the
environment of the script before it is loaded.
Variables for options that may be repeated have list
values. Other variables can be set using VAR=VAL on
the command line. After the script is loaded, option
values that were not set on the command line are
replaced by the values set in the script.
-F=FILE, --config=FILE
Domain configuration to use (SXP).
SXP is the underlying configuration format used by
Xen.
SXP configurations can be hand-written or generated
from Python configuration scripts, using the -n
(dryrun) option to print the configuration.
-n, --dryrun Dry run - prints the resulting configuration in SXP
but does not create the domain.
-x, --xmldryrun XML dry run - prints the resulting configuration in
XML but does not create the domain.
-s, --skipdtd Skip DTD checking - skips checks on XML before
creating. Experimental. Can decrease create time.
-p, --paused Leave the domain paused after it is created.
-c, --console_autoconnect
Connect to the console after the domain is created.
--vncviewer Connect to the VNC display after the domain is
created.
--vncviewer-autopass Pass VNC password to viewer via stdin and -autopass.
[options] [vars]
Create a domain.
Domain creation parameters can be set by command-line switches, from
a python configuration script or an SXP config file. See documentation
for defconfig, config. Configuration variables can be set using
VAR=VAL on the command line. For example vmid=3 sets vmid to 3.
Wed Jan 16 09:50:04 IST 2013...
Wed Jan 16 09:50:04 IST 2013
com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: englabbld10 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000e40574ce6f97e906 0004fb0000060000ff2b96ea9cc79078, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg'] failed (1): stderr: Error: Unable to open config file: /OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg
stdout: Usage: xm create [options] [vars]
Create a domain based on .
Options:
-h, --help Print this help.
--help_config Print the available configuration variables (vars)
for the configuration script.
-q, --quiet Quiet.
--path=PATH Search path for configuration scripts. The value of
PATH is a colon-separated directory list.
-f=FILE, --defconfig=FILE
Use the given Python configuration script.The
configuration script is loaded after arguments have
been processed. Each command-line option sets a
configuration variable named after its long option
name, and these variables are placed in the
environment of the script before it is loaded.
Variables for options that may be repeated have list
values. Other variables can be set using VAR=VAL on
the command line. After the script is loaded, option
values that were not set on the command line are
replaced by the values set in the script.
-F=FILE, --config=FILE
Domain configuration to use (SXP).
SXP is the underlying configuration format used by
Xen.
SXP configurations can be hand-written or generated
from Python configuration scripts, using the -n
(dryrun) option to print the configuration.
-n, --dryrun Dry run - prints the resulting configuration in SXP
but does not create the domain.
-x, --xmldryrun XML dry run - prints the resulting configuration in
XML but does not create the domain.
-s, --skipdtd Skip DTD checking - skips checks on XML before
creating. Experimental. Can decrease create time.
-p, --paused Leave the domain paused after it is created.
-c, --console_autoconnect
Connect to the console after the domain is created.
--vncviewer Connect to the VNC display after the domain is
created.
--vncviewer-autopass Pass VNC password to viewer via stdin and -autopass.
[options] [vars]
Create a domain.
Domain creation parameters can be set by command-line switches, from
a python configuration script or an SXP config file. See documentation
for defconfig, config. Configuration variables can be set using
VAR=VAL on the command line. For example vmid=3 sets vmid to 3.
Wed Jan 16 09:50:04 IST 2013...
Wed Jan 16 09:50:04 IST 2013
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAsyncAction(ManagedObjectDbImpl.java:1002)
at sun.reflect.GeneratedMethodAccessor3034.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAsyncAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:596)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1012)
at sun.reflect.GeneratedMethodAccessor1231.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:826)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at sun.reflect.GeneratedMethodAccessor1239.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:329)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:289)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000e40574ce6f97e906 0004fb0000060000ff2b96ea9cc79078, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg'] failed (1): stderr: Error: Unable to open config file: /OVS/Repositories/0004fb0000030000e40574ce6f97e906/VirtualMachines/0004fb0000060000ff2b96ea9cc79078/vm.cfg
stdout: Usage: xm create [options] [vars]
Create a domain based on .
Options:
-h, --help Print this help.
--help_config Print the available configuration variables (vars)
for the configuration script.
-q, --quiet Quiet.
--path=PATH Search path for configuration scripts. The value of
PATH is a colon-separated directory list.
-f=FILE, --defconfig=FILE
Use the given Python configuration script.The
configuration script is loaded after arguments have
been processed. Each command-line option sets a
configuration variable named after its long option
name, and these variables are placed in the
environment of the script before it is loaded.
Variables for options that may be repeated have list
values. Other variables can be set using VAR=VAL on
the command line. After the script is loaded, option
values that were not set on the command line are
replaced by the values set in the script.
-F=FILE, --config=FILE
Domain configuration to use (SXP).
SXP is the underlying configuration format used by
Xen.
SXP configurations can be hand-written or generated
from Python configuration scripts, using the -n
(dryrun) option to print the configuration.
-n, --dryrun Dry run - prints the resulting configuration in SXP
but does not create the domain.
-x, --xmldryrun XML dry run - prints the resulting configuration in
XML but does not create the domain.
-s, --skipdtd Skip DTD checking - skips checks on XML before
creating. Experimental. Can decrease create time.
-p, --paused Leave the domain paused after it is created.
-c, --console_autoconnect
Connect to the console after the domain is created.
--vncviewer Connect to the VNC display after the domain is
created.
--vncviewer-autopass Pass VNC password to viewer via stdin and -autopass.
[options] [vars]
Create a domain.
Domain creation parameters can be set by command-line switches, from
a python configuration script or an SXP config file. See documentation
for defconfig, config. Configuration variables can be set using
VAR=VAL on the command line. For example vmid=3 sets vmid to 3.
Wed Jan 16 09:50:04 IST 2013
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 40 more
End of Job
----------Hi Julian
thanks for your response. I have cross validated and confirm that NFS filesystem is mounted on both the OVM servers
Server englabbld10
[root@englabbld10 /]# df -kh
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 3.0G 683M 2.1G 25% /
/dev/sda1 99M 28M 67M 29% /boot
tmpfs 503M 0 503M 0% /dev/shm
none 503M 80K 503M 1% /var/lib/xenstored
/dev/mapper/360a98000433465644e346f2d4836514d
10G 398M 9.7G 4% /poolfsmnt/0004fb000005000046c0cb2a4467e2d6
206.236.134.65:/vol/ovmnfs
300G 5.2G 295G 2% /OVS/Repositories/0004fb0000030000e40574ce6f97e906
/dev/mapper/360a98000433465644e346f2d48377670
476G 23G 453G 5% /OVS/Repositories/0004fb000003000036658ed4a80c8716
[root@englabbld10 /]#
Server englabbld09
[root@englabbld09 ~]# df -kh
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 3.0G 683M 2.1G 25% /
/dev/sda1 99M 28M 67M 29% /boot
tmpfs 503M 0 503M 0% /dev/shm
none 503M 152K 503M 1% /var/lib/xenstored
/dev/mapper/360a98000433465644e346f2d4836514d
10G 398M 9.7G 4% /poolfsmnt/0004fb000005000046c0cb2a4467e2d6
206.236.134.65:/vol/ovmnfs
300G 5.2G 295G 2% /OVS/Repositories/0004fb0000030000e40574ce6f97e906
/dev/mapper/360a98000433465644e346f2d48377670
476G 23G 453G 5% /OVS/Repositories/0004fb000003000036658ed4a80c8716
[root@englabbld09 ~]#
Edited by: ovmnewbee on Jan 16, 2013 5:04 PM -
Weird Driver swap issue since 10.4.10 install
hey all hows it going.
i have a weird issue that i believe is a video driver issue. im actually a system administrator for a company so this is kind of fustrating not knowing how to fix something, so i turn to you guys!
ok so i have a imac g5 17" pc i've had since around 2003-4 now.. and the issue is that the display keeps alternating between 800X600 to the proper native resolution by itself randomly.
i have done a re-install of osx 10.4 and repatched to no avail, i have repaired permissions to the disc, i have started osx in safe mode and got it to rebuild the basic windows.preferences.plist file to no avail.
and then i noticed something. the specs on my mac had changed slightly since the 10.4.10 upgrade. i have not made any upgrade changes.
basically, this should be the video card according to apple and my receipt
Graphics NVIDIA GeForce FX 5200 Ultra with 64MB DDR
SDRAM with AGP 8X support
from the website
http://support.apple.com/specs/imac/iMac_G5.html
looking on my "about my mac" "more.." section it states
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: AGP
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-xxxxx-117
Displays:
err.. what the? i believe this COULD be the issue, no?
so my question is, how in the world could this happen and how do i change it back or change the video driver ? please help asap!Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.4.6 Combo update. Others reading, download the Combo that applies to your system.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE
Maybe you are looking for
-
Can I pass a table function parameter like this?
This works. Notice I am passing the required table function parameter using the declared variable. DECLARE @Date DATE = '2014-02-21' SELECT h.*, i.SomeColumn FROM SomeTable h LEFT OUTER JOIN SomeTableFunction(@Date) I ON i.ID = h.ID WHERE h.SomeDate
-
Is it better to run parallels alone or bootcamp?
I had an older MBP and at first i was running bootcamp alone with my autodesk inventor software. Then i happened to buy and install parallels and everything ran perfect! Within the last week I upgraded to a new MBP with a faster processor and twice t
-
Duplicate attribute key in date Dimension
Hi, I have created a date dimension using this code http://www.codeproject.com/Articles/647950/Create-and-Populate-Date-Dimension-for-Data-Wareho It contains one attribute 'Month' I have created one fact table which contains the following dates Start
-
Info object supporting multi language?
How to make IO to support multi language.We have SPRAS (Language Key) in data source.? Points will be definitely assigned for proper points. Thanks, Ravi
-
So firefox crawls when starting up using network home folders. I'm wondering if there is a way to keep the caches local and only save personal settings to the home folder located on the server.