Weird panel behavior in Develop

I leave the left panel on auto to keep as large of a photo as possible while editing in develop.
I may go back and forth between 2-3 shots using the film strip to compare exposure corrections between different shots to choose the best one.
However, if one of the 3 shots has a preset applied to it every time I go to that image the left panel opens with it into the always open position. This does not happen if there are no presets applied.
Is this a bug or known/programed behavior? If so, can I stop it. Just because I applied a preset does not mean that I need to have the left panel open every time I view that image.
Thanks

John,
Tried your suggestions to no avail. Could be a quirky code thing or some conflict deep in the DLL world. I will leave the performance settings on "best performance" anyway, since I don't care about shadows and fades or any of the other features of the interface that improve appearance. I only care about the photos and they aren't impacted by those things.
Thanks anyway. Glad it worked for you.

Similar Messages

  • Just updated to LR5.4 on my mac and the Detail Panel in the Develop module is missing. How to fix?

    How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.

    Right-click on any RH panel header in Develop and put a check mark next to the Detail panel

  • I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even

    I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even uninstalled my lightroom and reinstalled it with same issue.  Help!!!

    Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

  • The "basic" panel in LR4 "develop" simply disappeared.  How do I get it back?

    The "basic" panel in LR4 "develop" simply disappeared. How do I get it back?

    the short cut is F8
    left panel F7
    bottom film strip F6
    top panel F5
    left and right panel "tab"
    thats on the common windows; no idea what the upper class do
    I think we have all be caught out with the disappearing panels

  • Can add the "keywording" panel in the Develop tab?

    Can add the "keywording" panel in the Develop tab?
    In my workflow, I rate or tag a photo only after I've made some PP adjustment. So, my workflow would flow better if the "keywording" tab resided in the Development tab as well. Is this possible? Can you add a panel from another tab?

    Not just keywords. Well.. I try to salvage borderline photos first through development, and add keywords if they come out right. If not, I reject the photos without adding any keywords.
    dj_paige wrote:
    As CatOne2 said, you can't do this.
    The Lightroom paradigm, for better or worse, is that you add keywords in the Library module.
    I cannot imagine why you would need to first post-process a photo before you know what keywords to add. Can you explain why you feel this is necessary?

  • Basic panel disappeared from Develop module.  LR 5.7 Mac OS 10.10.1 Tried control clicking headers of panels that are still there.  Do not get a pop up list.  Can't find way to restore.  What should I do?

    Basic panel in the Develop model no longer appears.  Started this afternoon.  Been using LR 5 since it came out.  No problem before today.  Searched forums and did the control click on develop module headers.  Check list doesn't appear.  What do I do next?  I did a Time machine restore but nothing changed.

    I have now tried control click, command click, option click and combinations of these on 2 computers running the same lightroom versions, same Mac OS with the same result. No list of develop headers, no way to check/ uncheck. 
    LR on my MacBook has all the panels.  On my iMac Basic and Split Toning are missing. 
    The only result of clicking is collapsing or expanding the individual sliders under the headers. 
    My only thought now is to find the preference files for LR and delete them and see if the missing panels return.  Any other suggestions?
    Sent from my iPad

  • Where is the folders panel in the develope module

    I just updated Lightroom to version 3.4 and now I can not find the folders panel in the Develop module. It's in the Library module but not in the Develop module. There is not even a right click option for a folders panel under the Develop module.
    What happened???

    Folders can be part of the develop module panel:
    http://www.robcole.com/Rob/ProductsAndServices/FolderCollectionsLrPlugin

  • IPhone 6 Plus weird screen behavior

    I recently started noticing some erratic touch behavior on my screen, it's as if I have a possessed phone such as taps that I did not make, or swipes (up/down/left/right) as well. The spotlight randomly swipes down, or the notification center (it seems like a consistent swipe down behavior but at different locations). I couldn't swipe left yesterday to unlock my phone, and sometimes hangs and only locking/unlocking can fix the unresponsiveness.
    Moreover, random tappings affect games and apps such as whatsapp, where it goes to the previous page due to a top left page tap, and then again on the edit button, then starts randomly scrolling up and down and tapping random parts of the screen.
    This is quite frustrating, I tried formatting and starting the phone as a new one and only installed Whatsapp, but the problem persisted, albeit at fewer occurrences.
    Now I noticed the problem again even though I'm on iOS 8.1, with only apps, music, and photos synced back from iTunes. What is happening ? How can I get this fixed ?
    Summary
    Issue :
    Erratic touch behavior which cannot be produced on demand
    Rare screen unresponsiveness following the weird touch behavior
    What I've tried :
    Reset and start phone as New
    Reset all Settings
    Hard Reset
    Currently using a sketching app to see how the screen taps randomly (for proof as well).

    Hello zazu90,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your touchscreen is behaving erradically on your iPhone, please follow the steps below.
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response - Apple Support
    Take care,
    Alex H.

  • Weird keyboard behavior in MacBook Pro 13'

    Hi guys, I have a MacBook Pro that's starting to show a strange keyboard behavior.
    The problem is that the keys: e r t y u i o (curiously all belong to the same row) sometimes get unresponsive.
    It's very annoying of course and it happened about 4 months after upgraded to Lion.
    The geneal perfomance of the laptop was deteriorated and I've read that a clean install of Lion might help so I've did it thinking that it will also fix any OS weirdness about the keys too.
    The machine works way better after the clean Lion install but the problem of those same keys persist.
    What I did next was to reset the PRAM thinking it might be interference from some weird state there. But after the reset the problem persisted.
    Curiously, I've figured out that when, for example the i key gets unresponsive, if I press AND hold the e key then the i key works totally fine (think of typing an "I" but using e instead of shift).
    If, when pressing the unresponsive keys, I use different angles or quantity of force in the pressure of the keys or cornes of the key the behavior stays the same. The only thing that seems to affect is holding the e key down before pressing it. Every time it gets weird I do it and it kind of get normal for a while.
    Also, sometimes, keeping some seconds the unresponsive key ends up getting responsive again (but not always).
    This mac has about two years now and it's very well preserved.
    Do this happen to anyone? ideas?
    Is there some other thing than PRAM I could reset to see if it gets normal again?

    You are making me dig into nightmare-ish memories here.
    Ok, I'll share.
    This is how turned out:
    Needed to send my MBP to another town with an Apple authorized service provider and asked to change the keyboard for a new one.
    It was ~20 days waiting until they got the new keyboard part from Apple and about ~3 more to get it fixed and ~2 more to get it again in town.
    I received it very well packaged and all was fine after that but the whole thing was very expensive, ~40% of the price I paid for the whole MPB in the first place plus all that time without being able to use it.

  • Weird Battery Behavior in 7.1.1

    Has anyone else noticed weird behavior after upgrading to 7.1.1 - on my 5s its not that the battery is draining quickly - in fact its showin 5 hours 40 minutes usage with 75% remaining - which i find hard to believe
    whats weird is standby time equals the usage time but i have turnd off and aback on the iPhone - I even did a hard reset - i have a monitor program which is showing the cpu as mostly idling at 90% or more ( although the monitor probably doesnt know about the M7 chip - it probably doesnt even know about the A7 chip too)
    The battery percentage is not going down quickly - it seems to be thr same rate as with 7.1 but i dont believe these numbers
    Im going to let the battery drain completely and do a battery calibration - that some times helps after IOS upgrades
    But i was wondering if anyone else was seeing this and had any suggestions

    Grant Hiesterman wrote:
    Out of curiousity, how were the issues fixed/resolved other the past?  With IOS updates? Other?
    The problem has always been an errant app that got stuck in a loop. It can happen any time, but is more likely to happen right after an update. My hypothesis is that the update process suspends running apps, and sometimes after the update they "lose their place" and spin their wheels trying to find it. (It's easier to say it that way then to talk about race conditions.) What will frequently fix it is to run the battery all the way down until the phone shuts off. This terminates all processes, even those that cannot be killed from the Quick Launch screen.
    You can also try to find the app; if it's email turning off any Push email accounts, rebooting, and turning them back on will frequently fix it. If it's a 3rd party app killing all apps in the Quick Launch will frequently fix it.
    Sometimes just turning off the phone for a few minutes will fix it.
    Restoring the phone as new will usually fix it, but restoring from backup may not, because the app state may be preserved in the backup.
    It really just a matter of trying things like these one at a time. One of them will work.
    Do you or Trevor have a CPU monitoring app you believe is a quality application?
    I've tried several, and haven't found any that I like. I like Trevor's answer.

  • How do I get the basic panel in the develop module to reappear in Lightroom 5?

    Hello! I was editing a photo in Lightroom 5 the other day, and I thought I hit something, but all of a sudden the basic panel was missing. I went online to see how I can fix it, and what was suggested was to right click on one of the panels and it should have an option that says basic, in order to get the basic panel back. That is what I did, but what it does is just opens and closes the panels. I don't know how to get my basic panel back, I hope I can get some advice.
    Thank You!

    The trick is to right-click on one of the other panel headers, e.g. Tone Curve, and you'll see a context menu allowing you ro reselect the Basic Panel.
    Alternatively, when in the Develop Module simply do Ctrl+1 (Cmd+1 on a Mac), or in the menu bar go to Window>Panels>Basic Panel.

  • Not a real problem anymore, but a weird Apache behavior wrt .php files

    Hello everyone. Yesterday I was trying to set up an ordinary LAMP server in my VPS, running Arch (first time ever touching apache). After all was said and done, and apache and PHP were correctly configured following the Arch Wiki, I tried to get some things like phpmyadmin and ampache running, but I found out that my browser was asking me to download either a login.php file or an index.php file (to be more specific: I added a test.php file in /srv/http and that was interpreted correctly and I could see all the information as intented; if i pointed my browser to /phpmyadmin or /ampache though I would see the first page but after trying to, for example, logging in with phpmyadmin I'd get the download prompt). I googled around and yes, everything was configured as it should have, I had the AddHandler directive in the apache conf file and all that jazz. This morning, I log in, I start apache (since it wasn't working I figured that I might as well shut it down for the night and yes, while testing and setting up things yesterday I restarted the daemon every time) and everything works as it should: ampache lets me create my configuration, phpmyadmin lets me see my DBs and everything works. So, the problem apparently fixed itself, or at least the weird behavior I was witnessing is no more. Is there any specific reason for this? I wouldn't want to start from scratch (and I probably will, since I like to mess up a lot, that's how i learn!) to perhaps find myself in this spot again and not know what to do!
    Last edited by mrz87 (2011-05-11 09:12:21)

    This was a problem with apache-2.2.17-2. Don't worry, it's fixed for good.
    https://bugs.archlinux.org/task/24208

  • Weird keyboard behavior PS CS3

    Hi all,
    Every now and then it seems like my keyboard has gone nuts.
    This always happens inside PS CS3. After doing some actions, especially when doing a 'Shift-Alt-Arrow key' action (duplicating a layer or group and moving), it looks as if the keyboard goes in some sort of 'Alt-Always-On' modus.
    The annoying thing about this is, that regular keyboard-shortcuts for selecting a tool don't work (pressing 't' for the type tool does nothing) but far worse is the fact when you want to move a layer or group of layers they get unwantedly duplicated.
    Sometimes this behavior seems to disappear, when I click around my desktop (outside of Photoshop), but sometimes it doesn't disappear. The only thing left to get rid of it is to quit and relaunch PS.
    Does anyone else have this problem, and how can it be solved.
    This weird keyboard thing does only appear in PS, every other application is not affected by it.
    I'm running PS CS3 on Windows XP SP3
    I have all updates of PS CS3 installed

    Zeno,
    I feel so stupid, but that also crossed my mind.
    And to be honest, I think that is really the reason.
    Why didn't I think of that before...

  • Folder Panel Behavior is different in LR3 Library

    I installed LR3 a couple of days ago and just noticed a behavior that is different from LR2 in the Folders Panel. The Folder and Sub Folder display is static when LR3 opens. In other words, if I minimize a set of subfolders, close the app and open it again, the subfolders show up expanded. Some do and some don't. It's like if LR3 took a picture of the "state" of the folders panel in LR2 when it imported the catalog and now it always comes up the same way. LR2 remembered the last state of the folders panel when opened - LR3 does not!!  I don't like this. I have a LOT of folders/subfolders! I don't want to see some of them always open! Is there a new preference I'm not aware of?
    Jose

    Bingo!! Thanks!
    Jose

  • Weird compression behavior

    I have been trying to compress some animation material for DVD. It is mostly flat colors with black outlines. The past few weeks I've been having trouble exporting to compressor via Final Cut (the connect to background process bug) and so I have been using reference movies loaded into Compressor standalone.
    I am seeing weird behavior, though. When I compress the reference movie, the frames look fine although every now and then there are artifacts, pieces of the image that break down. I think of them as compression errors, and I suspected that the compression markers at the beginning of each clip were not being exported in the reference movie.
    So I tried a few things and finally got Final Cut to connect to compressor directly. This worked in that the compression errors I was seeing are gone--HOWEVER, the overall quality of the encode has decreased markedly! The black lines around shapes are all jagged, and the whole image looks inferior to the one compressed in Compressor standalone.
    The thing is, both of these were compressed using the exact same preset! Does anyone know what the deal is? I would like to get the image quality from the standalone Compressor encode, but without the artifacts.
    Thanks for any advice,
    Bob

    Your mileage may vary with Compressor 2. Some like it, some don't.
    As for your original question, I've never seen unexplained changes like what you describe in a preset's behavior with FCP HD and/or Compressor 1.2.1.
    As for the "unable to connect to background process" problem I've seen that once in just over one year of use with Compressor and Final Cut. On this one occasion I just manually relaunched QMaster and everything was fine from then on.

Maybe you are looking for