Weird problem about FM 'CRM_ORDER_MAINTAIN'

Hello ,all:
     I try to modify some infomation about a sales order using FM  'CRM_ORDER_MAINTAIN'.But how strange,for instance,it can be successful for the first time in the morning (a.m)and the FM executes a long time  ,then modified infomation is ok.
And modify again using FM in succession,it will fail.However,in the afternoon(p.m),execute it again and will be successful.So, i think may be  after a big interval,modify will successful.
I don't know why and how to using the FM and look forward to your greate help.
Thanks.

Hi,
You need to use FM 'BAPI_TRANSACTION_COMMIT' or 'CRM_ORDER_SAVE' after executing FM 'CRM_ORDER_MAINTAIN' so that your changes are not in buffer but are relected down till the Database and you can see it next time you open your transaction.
Best Regards,
Pratik Patel
<b>Reward with points!</b>

Similar Messages

  • Weird problem about "trace()",bug or my mistake

    Guys,here is the problem.
    I built a flash file( acitonscript3.0),then I added "trace(1);"in the first frame.
    If I save this file in root of disk ,like C:,when I presse "Ctral+Enter",Nothing in the panel.
    But if I save this file in a folder like C:\test ,when I press "Ctral+Enter",I cant see "1" in the output panel.
    Who knows why? Please help.THANKS

    sorry ,wrong word ,should be "Ctrl+Enter"

  • Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • Weird problem involving my external hard drive - help please!

    I recently got a formac mini 120 gb firewire hard drive, which had been working fine with my g4 quicksliver.
    i then went to a friends (g5 machine) with my drive and he put some data on it - bought it back to mine and managed to re connect the drive and take the data - no problem - very happy.
    I recently gave my drive to another friend using a g5 and when it came back, nothing - i don't get the drive symbol appearing. turned the comp on and off many times and tried re-connecting etc still no drive appearing.
    Then i took the drive to my friend with a mac lap top power book. connected there - working fine. Baffling. was happy that my data can still be accessed.
    I know it's not the firewire cable because i can get power to the drive - i can see the red light at the fron on.
    Can anyone help with this weird problem?
    Thanks

    Thought you could use this info about getting FireWire to work!
    First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
    Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
    If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours might be the 10.4.10 Combo update. I have no idea since you did not fill out your specs. fully when you signed in to this site. Others reading, download the Combo that applies to your system. This link is for PPC Macs not Intel Macs.
    If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
    For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
    Good Luck!
    Cheers!
    DALE

  • A problem about Chinese encoding

    When i access portal by SSL,I find one or two problems about encoding.
    reshow these problems:
    1. Locale be set to Chinese(zh_CN)
    2. access portal by SSL
    3. Administration/create portlet
    Then the popup window's title will show a bad encoding.
    otherwise,if i search chinese, then only have bad encoding shown in the searchbox and i can't get anything.
    MY running enviroment:
    windows 2003
    plumtree foundation v6.0
    plumtree publisher v6.2
    tomcat 5.0.58 with jre_1.4.2.08
    MSSql 2000 sp4
    and I have tried other BEA ALUI newer version,I can get these problems.
    I'm appreciated for any help.

    ANSI 0xFF is NBSP. NBSP in Unicode is 0x00A0... so neither 0x00FF (which is �) nor 0xF5F8 (which is in the "private use" range) is correct. Something really weird is going on.We are talking about CP1252 and in CP1252 0xFF is �
    (see http://czyborra.com/charsets/iso8859.html for example) and thus is \u00FF correct.
    btw. I would never use windows notepad as reference application.

  • Weird problems with Leopard on iMac G5

    I've started having some weird problems—I think they may have started after running iDefrag, please no discussions about whether to defrag or not, but I'd done it before since upgrading to Leopard and nothing like this ever happened—sometimes while looking at a picture in Preview I'll click outside the frame onto the desktop, but it won't switch to the Finder, no matter how many times I click, also sometimes the computer will go to sleep *while I'm using it* (i.e. moving the mouse); I have set to put the display to sleep after five minutes of inactivity, and the computer never (I donate my CPU cycles).
    Also sometimes when I click on the Firefox icon in the Dock it appears as well in another section (so I have two FF icons at once)--I've been having some problems with FF and I think it's a bad profile but would this be related?
    All this started within the past week or so, but there wasn't a clear-cut before-and-after with the defragging (I did run OWC Media Scanner for the very first time, but it didn't find any errors, so presumably it didn't change anything), so I'm a little stumped. I ran Disk Utility and DiskWarrior, but the former didn't find anything and the latter only found a custom flag icon error.

    Check out the following links:
    http://support.apple.com/kb/TS1541 Mac OS X 10.5: Troubleshooting installation, startup, and login issues
    Mac OS X v10.5 Leopard Troubleshooting/Support
    Leopard Forums
    Keep calling Apple while you still its 90 days of free phone tech support.

  • Weird problems with XFCE

    So I got a weird problem with XFCE (I think) sometimes everything just stops working, my PPTP vpn, can't start new applications, no shortcut commands on my keyboard works etc. For example when this happened and I tried to open a text document with gedit i got "Process /usr/bin/Thunar exited with status 1" and when I'm connected to my vpn I can't access the internet, not browsing and I can't ping other websites. And in my terminal instead of "icamaxi@localhost" it becomes "[email protected]" 
    This problem happens randomly and it works if you restart the computer.
    my xinitrc looks like:
    #!/bin/sh
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    exec startxfce4
    I also get this error message sometimes if that helps you
    "(process:1055): Gtk-WARNING **: Locale not supported by C library.
    Using the fallback 'C' locale.
    No protocol specified"
    Xorg log
    Another thing that is not related to this problem but that is annoying is that i can't lock my screen, when I try nothing happens, I've tried the shortcut command and also with the actions button applet but none of this work.
    Last edited by Icamaxi (2012-11-24 17:13:22)

    Icamaxi wrote:
    So I got a weird problem with XFCE (I think) sometimes everything just stops working, my PPTP vpn, can't start new applications, no shortcut commands on my keyboard works etc. For example when this happened and I tried to open a text document with gedit i got "Process /usr/bin/Thunar exited with status 1" and when I'm connected to my vpn I can't access the internet, not browsing and I can't ping other websites. And in my terminal instead of "icamaxi@localhost" it becomes "[email protected]" 
    This problem happens randomly and it works if you restart the computer.
    my xinitrc looks like:
    #!/bin/sh
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    exec startxfce4
    I also get this error message sometimes if that helps you
    "(process:1055): Gtk-WARNING **: Locale not supported by C library.
    Using the fallback 'C' locale.
    No protocol specified"
    Xorg log
    Another thing that is not related to this problem but that is annoying is that i can't lock my screen, when I try nothing happens, I've tried the shortcut command and also with the actions button applet but none of this work.
    I'm not certain about your first issue, but does it ever occur when you aren't connected ot your VPN?
    For the screen locking problem, what are you using to lock your screen? I use xflock4, and have a keyboard command set up in the keyboard commands to lock my screen.

  • Weird problems with battery

    Hi guys,
    I having some weird problems with my new battery. I changed the old battery (that died) for a brand new one. The first problem was: the mac didn't recognized the new battery in a macbook pro 13 early 2011. So, I putted the battery in a another macbook pro 13 mid 2010 and worked. So, I passed the battery again to macbook early 2011 and worked fine. I thought this very weird, but it is ok. The big problem came after: about two or three days of regular use, the mac just didn't turn on (I'm sure the battery charge was full). Even the battery charge button didn't work, like as the battery didn't stay there. However, if I shake the mac, something happen and the battery start to work normally. few minutes after (around 15 minutes), the mac shut down immediately, like as someone disconnect the battery from MB. If I shake the mac, the same thing happen again, few minutes after the mac turn off. The other strange fact is: if I open the mac, disconnect and reconnect the cable of battery (that connect with MB), the mac start work properly and 2 or 3 days after the problem go back.
    Anyone has a clue?
    I'm not confident about a bad contact problem of the cable with the MB, because the problem is repeated with some regularity of days (ever 2 or 3 days after connect the cable to MB).
    I guess could be a problem in the logic board of the battery... What do you think could be? If the problem is because the logic board, is there a solution?
    Thanks

    Call Apple and get them to take a look at it, you've done all the 'customer troubleshooting' you can ...

  • StarForce GF FX 5700: weird problem

    Since I bought this  geforce I used the 52.14 drivers from MSI. After having troubla with a game, I had to update my drivers. After installing the 56.72 ForceWare-drivres from nVidia, I had a  quite weird problem.
    After booting my PC, I started Battlefield Vietnam, and got this: The menu
    in-game (normally it's even worse)
    I tried a few other games, but they all had the same problem.
    I rebooted, restarted BF:V and everything was normal again.
    But, with those newer drivers, I had the same thing every day. If I worked in Windows too long, I had to reboot before I could play my games (descent).
    A few weeks later someone told me that the weird colors where caused by overheats.
    Down-clocking (starting from the standards, I never over-clocked the card) didn't solve my problem. Then I realized that everything worked perfect with the 52.14-drivers. I re-installed the drivers from the disc (52.14), and yes, my problem didn't exist any longer.
    The problem is gone (by using the 52.14), but I can't update my drivers, which is necessary to play certain games, without having to reboot to play.

    i put a post up about my problem with my fx5700 and bf1942 earlier, but no one has responded as of yet.  the 1st screen that was posted (all red) thats EXACTLY how my screen looks.  i've tried the drivers that came with the card (dont remember the version off the top of my head) and the latest drivers both showing the red screen.  did anyone come up with a resolution for this situation?

  • Really weird problem with Usage Tracking!

    Hi guys
    We are running OBIEE 11.1.1.6.5 on Exalytics and allmost all is fine and dandy. We have though one weird problem. When we first enabled usage tracking, we sudddenly got some errors on some of our dashboards, saying that we didn't have the privilegies to create temporary tables. Allright we got our user (which is a shared user) the privilegies to create temporary tables, and the reports with the problems started working again! Awesome! But low and behold - then Usage Tracking stopped working, not a single mentioning in the logfiles about it. Maybe an error or, the acknowledgement that Usage Tracking has started, which is the normal.
    So basically we are running without Usage Tracking because the reports that gives us the problems are deemed more important... which they might be, but thats different story...
    Any ideas to what is going on here? We have collected Usage Tracking data, while the reports were broke, so im quite confident that the setup is correct. But why would it stop, when giving "create table" privilege to our shared user?
    Best regards, Jacob

    What is the setting for UsageTrackingDirectInsert?
    Have you tried chaging the output to file instead of database?
    Please see:
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/usage_track.htm#i1017237
    Section 9.3, "Setting Up a Log File to Collect Information for Usage Tracking"
    Michael
    PS:
    Hi Christian! :)

  • Two weird questions about BP maintenance......SOS!!!

    Two weird questions about BP maintenance......SOS!!!  
    The procedure is like this:
    These informtion will be import to SAP:
    BP information
    Address Information of this bp.
    Communication information of this BP
    1. check if the bp exist, if yes, update the BP.Then go to 3.if no go to 2
    2. Create a bp with the Address information and communication information
    3. Check if the Address information has been existed,if yes go to 4.else go to 5
    4.Update the address information with the communication information.
    5.Create a new address for this BP.
    And the problem I got is like this:
    1. After I changed the BP information, such as the surname,lastname etc.Use this BAPI
    "BAPI_BUPA_CENTRAL_CHANGE",I commited it.Then I call the BAPI "BAPI_BUPA_ADDRESS_CHANGE" to change the Address of this BP,however
    When I call the BAPI_BUPA_ADDRESS_CHANGE,it always told me the BP is locked by myself.............
    I am sure I do not open the BP in the other window.And I commit it after I call the BP Change BAPI.
    2. When I change the communication information ,it always told me BAPIADTEL you want to update does not exist in this system.....I am sure it does.
    Who can help me??
    Thanks very much

    Hi,
    1) Problem with the lock. To commit the changes after the BAPI_BUPA_CENTRAL_CHANGE API, instead of using commit work to commit, Use BAPI_TRANSACTION_COMMIT. This should solve the problem. This wil help in clearng the buffers of BP.
    2) in the BUPA_ADDRESS_CHANGE, for telephone there are two parameters to be filled IT_ADTEL, IT_ADTEL_X
    IT_ADTEL : Should be filled with the telephone details etc (Consnumber should not be filled for inserts. This should be filled only for updates).
    Corresponding IT_ADTEL_X structure has to be filled with update flag as 'I', 'U' or 'D' based on the task.
    Hope this helps. Let me know if some more info is needed.
    Regards,
    Sudheer.

  • Really weird problem -- won't download mail from one sender

    I'm having a really weird problem. Apple Mail won't retrieve mail from my Gmail account via POP3 from one sender only. All other mail is downloaded normally, except from a particular sender. What could be causing this? Thanks.

    I am trying to remember and research something about the Junk filter and Gmail accounts. Have you checked in your Junk mailbox, if Junk in enabled and there is a separate Junk mailbox?
    If you click on my name to the left, and look in the bio line of the resulting Profile, you will find an email address you can reach me with. If you email me at that address, I will send you a Gmail address that your sender can test sending a message to me at my Gmail account.
    Ernie

  • Weird problem with playing videos on v2009.08 with KDE desktop

    Hi all.
    my weird problem is; i see a transparent box instead of video, in all players!
    in addition VLC immediately be killed in case of playing vids.
    i also tried that with compiz effects disabled but it didn't work.
    plz help me about this.:(

    I don't know why but changing the video output driver in smplayer and vlc corrected it. But there is no option to change video output driver in dragon player.

  • Weird problem with Macbook Pro 15" and Asus PB278 monitor

    Hi there
    I recently bought a brand new MacBook pro 15" the one with a dedicated nvidia 750 vid card. However I'm facing weird problems while connecting it to a external monitor Asus PB278 (1440p monitor). I use a mini display port to display port cable.
    My problem is: Sometimes it works perfectly, but then if I put the laptop to sleep, sometimes it won't recognise the screen at wake up, at first I tried to restart the system, power on and off the monitor, connecting and reconnecting the cable... nothing worked. I even bought a expensier cable thinking it was probably a low quality cable. I found that then only way to fix this is to connect the monitor with a mini display to HDMI cable I have (won't support over 1080p), and then put the mini display to display port cable again... it is freaking bizarre.
    This is very frustrating, I live outside the US and while the retailer will honor the guarantee I'm not sure if this is a Software or Hardware problem, It will take them about 3 weeks to replace my system which is unfortunate due to I have plenty of work to do. I don't want to send it on guarantee just to find out hey... display recognition is broken again. My questions are:
    Is there a way to know if this is a hardware or software problem?
    I've heard Yosemite is having some issues regarding external displays, is this one of those?
    Have you found yourself experiencing this problem? Could you fix it?
    Sorry if my english is a bit weird, thanks in advance.

    Hi Gatobolo,
    Thank you for contributing to the Apple Support Communities.
    It appears that you've discovered unusual behavior with your MacBook Pro and an external display, where you need to temporarily connect a different display adapter before you can use your Asus PB278 again.
    I can offer some additional tips to help resolve or further isolate the issue you're seeing.
    First, try the following resets to see if they eliminate the behavior:
    You can reset the Mac's parameter RAM and SMC.
    Next, if the issue occurs again, try restarting your Mac into Safe Mode:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    You can find the steps above in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    If your display is recognized in Safe Mode, or after restarting again, the issue may be due to a software conflict.
    Another suggestion mentioned in the article above is to try a different type of display adapter, such as a Mini DisplayPort to Dual Link DVI adapter.
    If the issue persists, you can also back up your data, erase your hard drive, and reinstall a fresh copy of OS X Yosemite.
    OS X Yosemite: Erase and reinstall OS X
    If the issue still occurs after a clean install, troubleshooting the hardware may be necessary.
    Best Regards,
    Jeremy

  • Corecenter caused weird problems

    I just installed Corecenter and it caused a weird problem.  It flashed on my screen and then went right into the tray.  Then I closed it and tried to shut my system down.  I couldn't.  Everytime I tried to hit shut down the menue would pop up and go back over and over again.  I had to manually hit the switch to shut it down.  I've removed it and now everything is fine.  I was using the latest version as well

     System restore is a good thing .
    I use it all the time uninstalling crappy apps/driver i try out
    making a restore point before .
    Much better way than to trust crappy programmers uninstall routine which leave leftovers most of the time ,both files and registry entrys .
    Agree with corecenter , i give it most uglybuggy award application made in 2004 .
    i only use it to set a permanent rpm on chipset fan & cpu fan and forget about it deleteing all desktop shortcuts and autostart (but have it installed incase i need fan setting again after cmos reset or something)

Maybe you are looking for