Weird Problem after Rendering

Okay, so my first edit was a 2 hour long video that was recorded by software from DxTory which records video games. This records in 1080 P so that's what I was hoping to get from the video. After editing, and exporting and rendering in the MPEG HDTV 1080p 29.97 which turned out to be about 12.5 GB large. Uploading this to YouTube I found that the video is only viewable in 360p not what I had expected in 1080p. Did I do something wrong while rendering, if so, what can I do to get my videos to be in 1080 p on YouTube.

CurtisC
You are going to be bound by the upload limitations of your exports. There is no way to extend the Premiere Elements 12 Publish+Share/Social Websites/YouTube limitations of file size 2.0 GB/15 minutes. However, if you take your Timeline to a file, you still have to deal with YouTube at the YouTube web sites. You can get extended limitations there that you cannot get through the within Premiere Elements upload route.
Of all the export choices from Premiere Elements, probably the smallest file size would be expected from a Publish+Share/Computer/Windows Media export (see customization under Advanced Button). But, even there a 12.5 GB seems even much for YouTube to OK. But, I do not know how far YouTube will go with these special accounts with extended limits.
Although Facebook and Vimeo do not show limitations in the Premiere Elements Social Websites feature, they appear to have them. See their web sites for further information on that.
Will decreasing the duration of your video compromise the video message that you are trying to convey with your presentation? Can you get your messages across in a series of shorter videos?
Have you looked at the Windows Media and AVCHD .mp4 choices under Publish+Share/Computer?
ATR

Similar Messages

Weird glitches after rendering

Dear people,
I did recently huge (for me) step from PRE 3.0 to PRE 8.0 (I hadn't know, there were 9 Version). Anyway, I had in my first video some weird artefacts after rendering my video, and I don't know, how to fix them. (With 3.0 I hadn't such problems, even if I used it already ca. 3 years for many similiar projects).
You can see this glitch between 0:59-1:10 of my video in the upper right corner.
http://www.youtube.com/watch?v=pp40ZjZ_lQ8
I tried it with various configurations, but it had always just various glitches. The youtube video was directly uploaded from PRE, and its quality is much more better than the glitch-full videos I exported as files. Do I do something wrong?
To my PRE project: it contains a video and many animated text layers. In the PRE preview, before rendering, everything looks good, but the rendering disappoints me :-)
Actually I wanted submit my video to some art video galleries, but I cannot since it's still a little bit buggy.
I would highly appreciate any help!
Thank you, people, in advance,
Merzmensch

Well, perhaps this was one of some differences to my previous videos: I usually use my Sony camcorder, but this time I used my digicam Ricoh K8. The video to this camera is fully incompatible with PRE (even if it's an AVI - I worked with another cameras before, but only with Ricoh K8 I discover incompatibility to just every video cut software), so I converted it through VirtualDub (using also MSU Cartonizer for special effects). As far as I cam recall, I converted it with Helix YUV codec, which I often use, because PRE 3.0 hadn't compatibility problems before.
About settings of the project, which details do you need exactly? I actually used the default settings. Here I did the screenshots of every part of Project settings:
http://s234.photobucket.com/albums/ee240/kosmopol/PRE%20settings%20Takahashi/
(Sorry, it's German version, I hope they haven't shuffled the settings) :-)
I have a feeling, that the problem is not with video footage, but with some PRE settings, since you can see in the glitch both levels: video and text together. Perhaps rendering failure?

Sound problems after rendering

Hi,
Being that I have Premiere Pro 7.0, I am not too sure how much help I will get, but i was hoping that someone here could still help if all possible. Here is my problem. I thought I start practicing developing video lessons for 3d software. These lessons would be created using a screen captureing program, called camStudio. In my first lesson, my first try doing the entire lesson as one video, I found out that the video file size exceeded CamStudio's exporter file size allowance when trying to save out to Microsoft DV 1 AVI file. I then decided to split the lesson into 2, but final compose it as one video in Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured videos, I thought it would make things easier if each screen captured video was in its own simulation. So, in other words, I have created 2 simulations in one project, and then I had nested both of them into the 3rd simulation. For example, simulation 1 was called lesson1 part a, and simulation 2 was named lesson1 part b, and the third simulation was called lesson1. Once I had everything setup, at first everything was working fine, meaing I could see the video and hear the sound tracks. However, after I choose to render the sequence using Microsoft DV11 AVI, I do not get any sound, and yet I made sure that the exporter exports both the video and audio. Furthermore, after rendering the project, going back to Premiere Pro's project, and pressing play, I get the error.... Disk Write Error: Verify drive connection, available disk space and disk access privileges
However, when I go inside simulation 1 or simulation 2, I still hear their sound tracks. One other thing I have noticed is that I get the sound back in the project if I move the orginal simulations into a new simulation. By doing that, I am then able to recover the project,. but if I choose to render again, the same process happens all over again.
Does anyone Have any ideas?
My Specs
Adobe Premiere Pro 7.0
Windows XP SP3
CPU 3.0GHz processor
RAM 512MB

so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However, my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

Strange problem after rendering!

Hi guys , could you help me please? my system is Premiere Pro CS3, Win Vista32, 2gb Ram , integrated ATI xpress 200m with 128mb (with the last drivers), core2duo 1.8.
My problem is the following: after importing an AVI 640x480 30fps clip shot with my sony digital camera t20, i add it to the timeline, i play it and it works fine but right after rendering it , it jumps and flick. It also plays fine with windows media player so i was wondering why !!?!??
Are my setting of the project correct? I used DV NTSC 48khz project, but dont think that is something about these settings right? could it be main settings of premiere? i also read that some people had problems using the same graphic card 200m with premiere and vista,could the problem be connected with it?
thanks in advance if you can help...

No. Sorry. I have seen video shot on the same camera at 24fps and at 30fps and the difference was barely detectable. Both scenes were lit the same and shot the same other than frame rate. If we slowed it down it was detectable. Once played on a 20' screen it was a lot more evident, however. When the footage took up my entire area of vision, then the stuttering of the slower frame rate was easier to see. But on a smaller screen, no.
The "video" look is caused by a lack of depth of field and a sharper contrast, both of which should be addressed during production, not post. Just slowing the frame rate just isn't enough to make it not look like video.

Audio problem after rendering!

Hi everyone! I am having a problem with sound in my project after rendering. I am using Adobe Premiere CS2 , and in Audio track 1, I have someone speaking, and in track 2 I have backround music. When I play it back in the window, together it sounds perfect. After rendering, the voice becomes very crackly and distorted. I have tried rendering just the voice without the backround music, and it sounds perfect. It seems the addition of backround music is causing the distortion to the other track. I have tried rendering the backround music seperately and adding it in, but still the problem persists. I adjust the music so that when the kids are talking, the music dips down, and when they are not, I leave it at it's normal level. HELP..I am losing my grip on this one! Thanks so much....Tammy

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

Picturesize problem after Rendering a timeline in Premiere Pro CS4

Hello,
I currently work with 4.1.0 and have the following problem. When I import Tif sequenze 1280x720 as film, first the film looks correct. The red line above in the timeline says that the sequence is not rendered. When I render now this timeline by pressing the Enter-key, after rendering the content looks zoomed in the preview and on an output monitor the picturesize shrink to approx. 70 %. But there is no effect on this track. This happens simply with original tif files. When I use JPEG files the problem does not exists. So I presume a problem when processing tif files. Do you know problem like this?
Thanks for an answer
André

André,
What are your Project/Sequence Presets?
Is Scale to Frame off, or on?
Good luck,
Hunt

Strange problem after rendering reader extension

Pdf file is working well before rendering reader extension right. After reader extension right one page is automatically created double.
I cannot realize why the page become double. I was analysing with xfa debuger. All properties of page same but page2 is created double.
https://dl.dropbox.com/u/70850345/print/xfaDebuger.jpg
I also moved page 3 next to page1. Then page3 is created double after rendering reader extension right.
DO you know why this page is created double?

Hi,
there are several bugs in you form, which is really 'complicated'.
Most are allowed page breaks for subforms where you did not allow page breaks for the parent objects (the surrounding subforms or pages).
You also set several subforms flowable while the surrounding page are set positioned.
I fixed a few of the problems but not all as I had not the time.
The next thing I don't understand are the many masterpages which have almost the same content.
You'll need just one. All the rest can be placed on the body page(s).
In fact you also only need a single body page which is floating top-to-bottom and allows page breaks.
There you can place all the subforms you currently set as single pages.
https://acrobat.com/?d=pvrhlCnYZtnhkY8HAi7GwA

Getting Weird Glitches After Rendering

I'm doing a big project with a lot of Motion files that we render in FCP. I had to have them as motion files versus QT because... long story, but after much trial and error it was the best solution.
Maybe a ten to twenty percent of the time, when I render these bits of the sequence, they get weird glitches. Sometimes lines across the non-alpha section of the motion file. Sometimes flashes of color across part of the video. When I simple copy the clip, delete the bad one, drop the copy in, and then rerender, it works fine. We were rendering to an external eSata drive. We're now rendering to an internal eSata drive-- just to see if that makes a difference.
Anybody ever seen this problem before?
Thank you,
Alex

NTSC, started as Digibeta. The Motion files however were created from image sequences that were starting as PAL. We converted them and have had good results, except for this 10-20% with glitches on rendering.
Thank you,
Alex

Weird problem after exiting soundbooth

for some reason when i exit soundbooth (and a few other programs in the creative suite), the windows do not fade in and out when opening and closing a window. also the minimizing and maximizing effect was gone. do any of you guys have this problem? please just tell me what happens after you exit the program

Hmm, very weird. It looks like this was happening after I configured MAC filtering and let the Airport Utility do a reboot when requested.
I just tried manually turning my Airport Extreme off (unplugging cable) for about 10-15 seconds, and after turning it on again, I was able to access it without any problems. Everything works great now. Not sure why, but it seems like this worked.
Cheers!

Weird problem after calling transaction...

Hello experts,
Please take a look at my code below:
AT LINE-SELECTION.
DATA: lv_fnam(50) TYPE c,
        lv_fval(50) TYPE c,
        lv_asset_dum    TYPE anla-anln1,
        lv_assetsub_dum TYPE anla-anln2.
GET CURSOR FIELD lv_fnam VALUE lv_fval.
IF sy-subrc = 0.
    CASE lv_fnam.
      WHEN 'WA_OUTPUT-ASSET_SUBNUM'.
        SPLIT lv_fval AT '-' INTO lv_asset_dum lv_assetsub_dum.
        SET PARAMETER ID 'BUK' FIELD wa_output-company.
        SET PARAMETER ID 'AN1' FIELD lv_asset_dum.
        SET PARAMETER ID 'AN2' FIELD lv_assetsub_dum.
        CALL TRANSACTION 'AW01N' AND SKIP FIRST SCREEN.
      WHEN 'WA_OUTPUT-EQUIP_NUM'.
        SET PARAMETER ID 'EQN' FIELD lv_fval.
        CALL TRANSACTION 'IE03' AND SKIP FIRST SCREEN.
    ENDCASE.
ENDIF.
the value of WA_OUTPUT-ASSET_SUBNUM is shown as asset number + asset subnumber.
for example:
1468-0000
Now, when we look at transaction AW01N it requires the company code, asset number and the sub number.
When you look at my code, I am splitting WA_OUTPUT-ASSET_SUBNUM at '-' and put them in 2 variables
as shown above. But when I call transaction AW01N it says that 'No depreciation areas defined for
asset 1468-0. It weird since when I manually enter those values it is fine.
Help would be greatly appreciated. Thanks a lot guys and take care!

Hello again experts,
here now is my revised code. It still has the same problem which says no depreciation areas defined for asset 1468-0.
After debugging it, lv_asset_dum has a value of 1468 and lv_assetsub_dum has a value of 0000. This should work fine if I enter it manually.
AT LINE-SELECTION.
DATA: lv_fnam(50) TYPE c,
        lv_fval(50) TYPE c,
        lv_asset_dum TYPE anla-anln1,
        lv_assetsub_dum(4) TYPE n.
GET CURSOR FIELD lv_fnam VALUE lv_fval.
IF sy-subrc = 0.
    CASE lv_fnam.
      WHEN 'WA_OUTPUT-ASSET_SUBNUM'.
        SPLIT lv_fval AT '-' INTO lv_asset_dum lv_assetsub_dum.
        CONDENSE: lv_asset_dum, lv_assetsub_dum.
        SET PARAMETER ID 'BUK' FIELD wa_output-company.
        SET PARAMETER ID 'AN1' FIELD lv_asset_dum.
        SET PARAMETER ID 'AN2' FIELD lv_assetsub_dum.
        CALL TRANSACTION 'AW01N'.
      WHEN 'WA_OUTPUT-EQUIP_NUM'.
        SET PARAMETER ID 'EQN' FIELD lv_fval.
        CALL TRANSACTION 'IE03' AND SKIP FIRST SCREEN.
    ENDCASE.
ENDIF.

CS3: brightness problem after rendering

Hello everybody,
I'm using Premiere Pro CS3 and I have a problem when I use Adobe Media Encoder to render my HDV 720p project: the final result looks brighter than the original footage on the timeline.
Anybody had the same problem? Could you please help me?
ADDITIONAL INFO ABOUT MY PROJECT SETTINGS:
HDV 720p 25 fps (the footage on the timeline is mainly a MOV file exported from After Effects CS3 with the Animation Preset)
ADDITIONAL INFO ABOUT RENDER SETTINGS:
Format: MPEG2
Video Codec: MainConcept MPEG Video
Quality: 5
TV Standard: PAL
Frame Width: 1,280
Frame Height: 720
fps: 25
Field Order: None (Progressive)
Pixel Aspect Ratio: Widescreen 16:9 (1.000)
Profile: (Main)
Level: High 1440
Bitrate Encoding: VBR, 2 Pass
Minimum Bitrate [Mbps]: 4
Target Bitrate [Mbps]: 10
Maximum Bitrate [Mbps]: 18.5
GOP Settings
M frames: 3
N frames: 12
Closed GOP every: 0
Automatic GOP placement (box checked)
ADDITIONAL INFO ABOUT MY HARDWARE:
      Computer Type                                     ACPI Multiprocessor PC
      Operating System                                  Microsoft Windows XP Professional
      OS Service Pack                                   Service Pack 3
    Motherboard:
      CPU Type                                          DualCore Intel Core 2 Duo E8400, 3000 MHz (9 x 333)
      Motherboard Name                                  Asus P5KC (3 PCI, 1 PCI-E x1, 2 PCI-E x16, 4 DDR2 DIMM, 2 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)
      Motherboard Chipset                               Intel Bearlake P35
      System Memory                                     2048 MB
      DIMM1: Kingmax KLDE88F-B8KB5                      2 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
      BIOS Type                                         AMI (06/25/08)
      Communication Port                                Communications Port (COM1)
    Display:
      Video Adapter                                     NVIDIA GeForce 8800 GT (512 MB)
      3D Accelerator                                    nVIDIA GeForce 8800 GT
    Multimedia:
      Audio Adapter                                     Realtek ALC883 @ Intel 82801IB ICH9 - High Definition Audio Controller

I did some tests.
1. It appears the problem is not my monitor: I connected my PC to a CRT TV and also viewed the images on a Laptot and the brightness intensity is the same.
2. I tried to render from AE to a loseless file and then import the loseless file in Premiere for the final render to MPEG2 file, but the final result doesn't change.
3. I tried to use another program: Sony Vegas Pro 9.0. I imported the MOV into Vegas and started a render to MPEG2 file. The result was the same as in Premiere: too much brightness.
4. So I went on with the tests and rendered to different formats/codecs. The most decent results I obtained with Lagarith Loseless Codec in Premiere and Sony AVC in Vegas.
But still I'm not satisfied. The image is still a little too bright, which is a problem because I have some granulation issues on the original footage.
I could try to darken the image before starting to render but I would like to find a more "professional" way.
If anyone else has other suggestions they are welcome
Thank you all for the support!

Weird problem after the last upgrade(10.4.8)

Hello all,
I am using a 1.66mhz MacMini with intelcoreduo. After the last upgrade
2weeks ago. I begun to encounter weird behaviors(those does not happen
all the time, but happens..) from my mac. I'll try to list those
behaviors below:
- trash can sometime can not empty, I have to open the thrashbin and
delete manaually by selecting each file to delete
-finder failing to open a new window.
- when i take screenshot, it only appears when i try to find it over spotlight
- and worst of them all, recent files downloaded on my desktop disappearing sometimes and only way to reach them ise search on finder, when spotlight finds it, it appears back again).
These are all so weird kinda behaviors. I am curious if any of you
having the same problems, or rather these problems has been allready
pointed.
Kind Regards,
alper,

I've seen some of those before but on a G4 Tower, so far never on my Intel Mac Mini.
I've seen screenshots not appear on the desktop until much later or when a new file is brought or created on the desktop. Likewise, I've seen the same behaviour with some files I've downloaded (to a specific downloads folder).
I remember stuffit 9 or 10 had a bug similar to this where when you expanded a an archive it was "empty" until you moved a new file into the folder or made a new file/folder in it, then it would show you the files that were actually in the expanded archive.
Try repairing your permissions and booting from your Mac OS X install disc and running disk repair.

Network has weird problem after Resume from suspend...

hi guys,
I have a ThinkPad T60 laptop with archlinux at home. and I have a router with wlan supported for the internet. Suspend/Resuming (pm-utils) works. Recently after resuming, the network-manager says WLAN connected with ESSID, but internet connection was lost. it is weird:
I can really connect the WLAN, e.g. I can ping another computer's IP and exchange files with it,
I can see my wlan by iwlist,
but I cannot reach the IP address of the router by Ping.
I tried restarting network-manager, switching off and on the wireless adapter neither worked. the only way I found to bring the network back is restarting the router.
I list the stuff that I thought would be helpful here, hope someone can give some hints.
thanks in advance.
kent$ uname -a
Linux ArchT60 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 20:24:07 UTC 2011 i686 Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz GenuineIntel GNU/Linux
part of my rc.conf:
MODULES=(acpi-cpufreq cpufreq_ondemand iwl3945 fuse radeon vboxdrv !floppy !pcspkr)
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.254"
ROUTES=(gateway)
DAEMONS=(syslog-ng !network @acpid @alsa netfs @crond hal @cups !dbus networkmanager @sshd tpfand gdm)
the last suspend/resuming log (/var/log/pm-suspend.log)
There errors when it was waked up. one with alsa, the other two about hal and tpfand. I thought that it has nothing to do with network.
And I didn't install netcfg. So the netcfg11 hook does actually nothing.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
... uname, lsmod and free output are omitted ...
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /etc/pm/sleep.d/09tpfand suspend suspend:
:: Stopping ThinkPad fan control daemon [BUSY] [DONE]
/etc/pm/sleep.d/09tpfand suspend suspend: success.
Running hook /etc/pm/sleep.d/10hal suspend suspend:
:: Stopping Hardware Abstraction Layer [BUSY] [DONE]
/etc/pm/sleep.d/10hal suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /etc/pm/sleep.d/91alsa suspend suspend:
/etc/pm/sleep.d/91alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Aug 25 01:39:30 CEST 2011: performing suspend
Thu Aug 25 21:11:44 CEST 2011: Awake.
Thu Aug 25 21:11:44 CEST 2011: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /etc/pm/sleep.d/91alsa resume suspend:
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
aplay: main:660: audio open error: Connection refused
/etc/pm/sleep.d/91alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
aplay: main:660: audio open error: Connection refused
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
Running hook /etc/pm/sleep.d/10hal resume suspend:
A daemon is starting another daemon, this is unlikely to work as intended.\n
:: Starting Hardware Abstraction Layer [BUSY] [DONE]
/etc/pm/sleep.d/10hal resume suspend: success.
Running hook /etc/pm/sleep.d/09tpfand resume suspend:
A daemon is starting another daemon, this is unlikely to work as intended.\n
:: Starting ThinkPad fan control daemon [BUSY] [DONE]
/etc/pm/sleep.d/09tpfand resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Thu Aug 25 21:11:46 CEST 2011: Finished.
Last edited by sk1418 (2011-08-26 20:08:39)

after it waked up, I did tried ifconfig down/up wlan0, didn't work.
I will try to bring down the wlan0 before suspend tomorrow.
some new test from yesterday
Router IP: 192.168.0.254
DNS:192.168.0.254
another PC: 192.168.0.1
one of Google IP:74.125.39.104
after waked up
ping 192.168.0.254 , failed.
ping 192.168.0.1 OK
ping 74.125.39.104 OK
ping www.google.com Failed
I changed the DNS to google DNS:8.8.8.8, then I can access website in browser, also ping www.google.com OK.
I even REBOOTed my laptop, I still cannot reach my router by ping 192.168.0.254.... accessing internet is ok...
if I restart router, everything is fine...
what is the problem!!! weird!
Last edited by sk1418 (2011-08-30 22:59:31)

Weird problem after updating to 1.2

Hi,
recently I updated to the iPod 1.2 software, but when I try to play some of the songs, it freezes and refuses to play unless I skip forward, press pause, then play again. I tried restoring the iPod, creating a new library etc, but it doesn't work! Please help! (If this problem still presists, I'll go to the Apple store, but I hope I don't have to)
BTW, my iPod is a 60 GB Black model.
Thanks!
Dell e1405 Windows XP

From the number of posts regarding the same issue with 1.2 and any ipod with a color display (both my ipod nano and video ipod crapped out), there is obviously a serious bug with this "upgrade."
I agree we should give them a chance, but I find it unacceptable that after this amount of time that the Applecare support technicians, up to TIER 3, have never even heard of this issue. They wanted me to return my ipod(s) in for factory service even after I numerously reminded them that they both work perfectly once downgrading to 1.1.1!
I am a long-time apple-geek, but this issue upsets me because it is so uncharacteristic of the standards of excellence Apple has always provided, and smacks of the pervasive frustration we all deal with when using Microsoft products.
......and it is especially frustrating that all of the purchases I excitedly bought once videos are now provided at 640x480 resolution are not playable with version 1.1.
But with version 1.2, the higher resoultion videos are transferable to the ipod, but no videos are playable due to this firmware incompatibilty.
Apple: do you read these discussion forums??

Weird problems after System updates

I downloaded updates for iTunes and Java earlier this week, and now I have some weird behavior going on with my iMac. I'm running 10.5.8 and Safari 5.0.2. When I'm using the computer the windows have started jumping around, moving from side to side, or one window moving to the front, then the back, by themselves. There is sometimes a noise...hard to explain, but sounds kind of like bom, bom, bom. It's happened before, but usually goes away with a restart. Not this time, though...
Anyone else had this problem, and/or hopefully able to suggest a fix?

Hi,
Rule out any problems with the startup disk since the software is "jumping around" ...
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. M*ake sure there is always 15% free space.*
If the startup disk is ok, might be a good idea to run the Apple Hardware Test considering the, "bom bom bom" sounds, instructions here.
Intel-based Macs: Using Apple Hardware Test
Carolyn

Weird Problem after Rendering

Similar Messages

Maybe you are looking for