Weird problem after the last upgrade(10.4.8)

Hello all,
I am using a 1.66mhz MacMini with intelcoreduo. After the last upgrade
2weeks ago. I begun to encounter weird behaviors(those does not happen
all the time, but happens..) from my mac. I'll try to list those
behaviors below:
- trash can sometime can not empty, I have to open the thrashbin and
delete manaually by selecting each file to delete
-finder failing to open a new window.
- when i take screenshot, it only appears when i try to find it over spotlight
- and worst of them all, recent files downloaded on my desktop disappearing sometimes and only way to reach them ise search on finder, when spotlight finds it, it appears back again).
These are all so weird kinda behaviors. I am curious if any of you
having the same problems, or rather these problems has been allready
pointed.
Kind Regards,
alper,

I've seen some of those before but on a G4 Tower, so far never on my Intel Mac Mini.
I've seen screenshots not appear on the desktop until much later or when a new file is brought or created on the desktop. Likewise, I've seen the same behaviour with some files I've downloaded (to a specific downloads folder).
I remember stuffit 9 or 10 had a bug similar to this where when you expanded a an archive it was "empty" until you moved a new file into the folder or made a new file/folder in it, then it would show you the files that were actually in the expanded archive.
Try repairing your permissions and booting from your Mac OS X install disc and running disk repair.

Similar Messages

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

I cannot get Apple to send verification email for Icloud after the last upgrade

I cannot get ICloud to work after the last upgrade on iphoto?

explain the crash... perhaps recovery might be more useful than new settings.
what is wrong with these settings https://autoconfig.thunderbird.net/v1.1/mindspring.com

The license for Win10 after the last upgrade to 10049 is still valid up to April 15th and not to October 15th

I installed the first preview of Win10. Which would be valid for up to April 15th. After the last upgrade the preview screen shows build 10049. Valid up to October 15th. But Windows is not activated. I tried to activate. Response: wrong key. (...-9D6T9).I
tried to change the key with the new one given in the nowadays downloading pages (...-233PK) Response: this key is not valid for the version is installed. So do I have to download the whole setup again and reinstall it to my pc?

There are only 2 product keys..........
For Pro ( non-Enterprise ) version it is : NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
For Enterprise version it is : PBHCJ-Q2NYD-2PX34-T2TD6-233PK
Look to the bottom right of the screen it tells you which version you have........

Problems with GNOME After The Last Upgrade

I have too many problems these days with my Arch box.. And I don't know when or how these problems are solved but I'm really bored about having problem all the time. I don't know all of these are bugs but if they're I'm ready to enter some bug reports.
1) After the last update, Metacity doesn't start automatically. So everytime, I don't have my mouse theme, my thema of borders of the windows, the notes I took with gnome's note applet doesn't disappear.
2) gnome-power-manager is never the same that I used to.. I just found that killing and rerunning it is at least make it work. But it's menus and options is not rich as I was earlier times. It doesn't say that much as it did in the earlier times.

I've same problem with gnome-power-manager, it works only when i kill it with killall gnome-power-monitor and re-run it.
About metacity i don't have problem with it.

After the last upgrade of OS X Mountain Lion I can't seem to adjust screen brightness anymore. Why and how do I solve this?

My screen brightness used to adjust itself and if not I could use f1 and f2 keys. After my last upgrade of OSX Mountain Lion, these do not seem to work. Does somebody know what happened and how I can return to the original situation?

Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting your Mac's PRAM and NVRAM
http://support.apple.com/kb/ht1379

Problems after the last Apple Security Update with trackpad/mouse tapping/clicking

Dear All,
I do have a MacBook Pro 15 (early 2008), Mac OS X (10.6.8). The logic board was replaced a couple of years ago under Apple warranty (distorted video problem). I am planning to repalce it after the next apple update on the macbook pro line. Before someone asks, I am using Snow Leopard because I still have some programs that needs Rosetta. I did apply the last security update and after I did shutdown and restarted the computer last night, the trackpad/mouse (mighty mouse, usb mouse) is not working properly. I just cannot do the left click or tap on the trackpad. The mighty mouse works perfectly, except the clicking. The same for the trackpad (tapping). I manage to open a pdf file with some keyboard shortcuts. I can use the mouse/trackpad to scroll and zoom in/out the document. I can use the trackpad to rotate the document, etc. Pressing on the might Just can´t tap/clock on the document to select or open it.
I alread did the obvious thing: command-alt PR, start in safe mode, unplug the power/battery for a few minutes...
Did you have a similar problem with the last security update. Do you have any suggestions.
Thanks,
Carlos

I have resolved the issue! As I mentioned, I am using a Logitech cordless optical mouse. I connected up my Apple keyboard & mouse and disconnected the Logitech. The problem no longer occurred with the Apple mouse.
I removed the batteries from the Logitech mouse and disconnected the USB receiver. Restarted the computer, reconnected the Logitech setup, disconnected the Apple stuff, and now it is working.

OBIEE(11.1.1.6.8) dashboard prompts "Please Wait" Problem after the automatic upgrade of browser

Hi all,
We have a problem in OBIEE(11.1.1.6.8) dashboard prompts after the upgrade of Chrome browser.. The values of dashboard prompts are not shown to user ( with message "Please wait" ) We had this problem in Internet Explorer 10. So we had announced the users to have minimum browser versions Chrome 12+ , Firefox 17+ , Internet Explorer 9.x as its is declared in certification matrix. Now after upgrade (automatically)in Chrome version 30.0.1599.101 m , we have the same problem and the only working browser remaining is Mozilla Firefox. What should we do to prevent this without upgrade or patch ? Is there any workaround ?
Thanks ...

OBIEE problems with Chrome (update 30) plus patch

After the last upgrade, my firefox will not open. Task manager says it is running, but I get nothing.

I finally allowed the last update to run... upon completion, my browser window would not open. I rebooted, got the window to open but had no function on the navigation bar. The only way I could navigate the web was to go to my home page, google, search for the web page and click on the results. Refresh also would not work. I did another reboot and now I'm back to no visual evidence of the browser window being open. It seems like every update for the past few months crashes my ability to utilize my add-ons and my ability to see video is almost always compromised. I try to ignore updates but the reminder keeps popping up so frequently it becomes a nusiance and I cave to the pressure!

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs

My apple ID was the original without the email extension. It caused problems with ITunes conversion after the last upgrade. Tech fixed that issue but my MacBook defaults to the old ID. Even though I have a new ID it defaults to the old. iTunes is ok.

How do I change my Apple ID, when it defaults to an old ID and ITunes is accepting another ID? The IDis very old and does not contain an email extension. I had a problem because of that earlier this year in my ITunes account and Apple fixed it.

Get in touch with Apple again -> http://www.apple.com/support/appleid/.
Good luck,
Clinton

Can not boot after the last upgrade [solved]

Hi all,
I upgraded my system this morning, but when loading I get the following error:
ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 seconds
It says so for 3 times, then continues and ends with a kernel panic.
Any idea what might have gone wrong?
Best regards,
Jan

Hi again,
Thanks to good guys on IRC, my problem is a sort of solved. The solution was basically to go back to the old IDE subsystem on my Intel box and wait until the kernel and the respective modules get more stable before trying the transition again. More precisely, I did the following:
1) in /etc/mkinitcpio.conf removed pata, sata and scsi hooks and put back the ide hook (and then of course ran mkinitcpio again);
2) in /etc/rc.conf blacklisted ata_piix and ata_generic;
3) in /etc/fstab and /boot/grub/menu.lst changed the device names back from /dev/sda* to /dev/hda*.
I hope there will be some announcement on Arch website when it will make sense to try the new system again.
Thanks to everyone who helped to sort this trouble out,
Jan

I purchased the upgrade that enables me to convert a pdf to a word document and after the last upgrade the Tool option does not appear only comments, how do i get the Tool option to return?

How do i get the tool option to return so that i can convert a PDF to word

First thing to try: uninstall, then reinstall the latest Reader version.
If that does not solve the problem, provide some information on your operating system, Reader version, etc.
B.t.w. did you sign in with Adobe Reader [Preferences | Adobe Online Services]?

TS1702 what is causing the iboostup application to crash after the last upgrade?

iboostup crashes and says that it is damaged on load. software is uninstalled by deleting application, reboot mac, reinstall from app store. problem remains with iboostup. other software works fine. downloaded another software from app store and it works too.

That usually means that Windows notices that the program isn't responding.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

HT4623 my iphone 4s is no longer being recognized by any computer after the last upgrade, is there a way to reinstall the ios without a computer?

I have tried changing the cable, reinstalling itunes, reset and hard reset on the phone, and it still is not working... Is there anyway to re install the os from the phone?

Have you tried rebooting the computer as well? Shut it totally off, then restart it and try again.If you are already on iOS 6.1.2 as your signature states, the only way to install an update/restore the phone would be to connect it to the PC.

After the last soft I cannot switch on the iPad

HI I have problem after the last upgrade of soft I cannot switch on the iPad

Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.

Weird problem after the last upgrade(10.4.8)

Similar Messages

Maybe you are looking for