Weird Problem Exporting HD to DVD (only when camera moving)

i just edited an HD footage then i exported it as self contained animated movie. then i compressed it with compressor as DVD Best Quality 90 min.
after i burned it with DVD studio Pro, i played it back from the dvd, and the image is acceptable with there is no camera movement. as soon as, the camera pans or tilts it becomes shaky and horizontal lines appear on the edges of the characters.
any idea what went wrong!?

It seems you have a field order problem in your movie.
i just edited an HD footage then i exported it as self contained animated movie
What HD format is your timeline and what exact format do you mean with "animated movie"?
Alberto

Similar Messages

Weird Problem with Already Burnt DVD

I burnt a DVD and everything routes to the final chapter marker. Everything in the scene select goes to the final scene and also when I hit play movie, it starts at the final scene.

Hi
This sounds strange:
• Do You mean - each Chapter starts at the last chapter and cont. to The End - or -
• Each Chapter starts where it should then cont. to The End
First one is wrong - I would:
• delete iDVD movie pref file (or even start a new user-account - it does it better)
• Start a new iDVD project
• And have a re-try
Second one: This is the way iDVD works - I would:
• Add each Chapter as an individual movie segment
(Yes this will take up double the space)
(This is due to the lack of a "PLAY-ALL" function in iDVD)
Yours Bengt W

Weird Problem just started happening, spinning ball when trying to play

I'm having a problem that just started happening, I've been using Final Cut Pro 5.04 in 10.4.8 on a G4 dual 800 for a long time now, no problems.
Today, I'm doing some Voiceovers, using the V.O. window, not even playing video, and it's doing this thing where I try to play a segment of recorded audio, and the beachball starts spinning for 15-20 seconds, and finally it plays the little snippet. I play it a couple times, it's working normally, then again I try to play it and it waits 20 seconds before kicking in.
I have no idea what to look at to fix this. I didn't change any of my settings, I'm recording onto a drive with about 5 GB of space...
I'm using a MOTU 896 firewire interface for audio.
Any ideas would be appreciated. Thanks!

I believe there is an issue with updates and firewire from the posts I have read over the last few months. Not sure what to tell you but did you update the OSX resently? Or Quicktime? If I were you I wouldn't update anything just yet. And perhaps you call roll back the OSX to a time and version that worked for you.
Good Luck
Z1&V1user

Problem with itunes locking up only when burning to music library

All of a sudden when I burn my discs to an external hard drive with about 1-3 songs (never at beginning or midway through the burn)left to burn itunes locks up, forcing me to restart computer. Not all discs but about 1 every 15-20 burned. Since I am burning over 2000 of my cd's to library this is very annoying. If I use itunes just to play the disc it is fine and the discs work fine in my home audio system. I use windows xp and am burning to a western digital external hard drive. The discs are all clean with no visible signs of scratches or scuffs.
Any suggestions?

yes i mean importing. by the way i use apple lossless. no the specific discs will not import. i just tried importing a disc i just bought new and it does not import the whoe disc as well. all of the discs i am importing are mine and are originals...not burned.

Weird problem With my Audigy 4

Hi all, I have a weird problem with my audigy 4. When I install the Nvidia IDE and Sata driver for my motherboard, I get sound problem in BF2, It glitches, I don't here my gun, well it's all ****ed up. Does anyone know why?Thanks in advance.

I have had every iphone model ever made. I have never had a problem like this before. It appears that there are small spots all over the screen. Not to be confused with the "yellow spots" other iphone 4 user have been reporting due to the glue not drying before they reached the customer. This is a different type of spot. I would compare it to a petrie dish that scientist test for things in.
The only thing I can think of is something is happening with the coating over the glass (oleophobic coating maybe braking down?). It only happened on the front screen and not the back glass. You can get the spots to go away when you use a micro fiber cloth to remove the natural oil from your face against the phone. The minute you start using the phone again, they appear. They are kinda annoying and make your phone screen look dirty and have a weird glare in it when your in the sun.
I made an appointment tomorrow to go to the apple store to see what they can tell me. Hope fully its nothing major. The worst thing that could happen is the phone gets replaces by another. Ill keep everyone update.

Weird Problem with Mouse Preferences

I have a weird problem with my mouse preferences.
When I open System Preferences - Keyboard & Mouse - Mouse, I can change the Double Click Speed as much as I want, it doesn't have any effect. No matter what the slider shows, the speed seems to be set to "slow" and stays like that. It's driving me mad, because I continuously open documents without wanting it. For example, when I click on a document and click a second time to change its name, it always opens. I'd have to wait VERY long before the second click to prevent that.
I've already tried to connect another mouse, or to use another USB port. Also I've tried to trash the Preferences Cache in my Library. Without success.
Anyone an idea what the problem is and how to solve it?
Mac Pro Mac OS X (10.4.8)

So I think now this is it
weborican's post at macosxhints helped me to solve the problem, this time for good, as it seems:
http://forums.macosxhints.com/showthread.php?p=336319
The problem seems to be the Intel version of the driver for the MacAlly IceKey keyboard. I uninstalled the driver and now everything works as it should. So until Macally bring a new driver I will use the keyboard that came with the Mac Pro.
who would think of the keyboard when the mouse seems to be the problem?

I can export many iphoto events to a Data stick. I want to do the same with a DVD. When I do the DVD window is blank. If I drag and drop can only do one. Help

I can "export", using file, many iphoto events to a data disk. When I do the same to a DVD the DVD window is blank and nothing has been exported. When I use drag and drop to a DVD it works but I can only get one event on the disk. How do I export many iphoto events to a DVD. I am using a write only DVD. I am using a Mac Book Pro OS 10. Thanks in advance.
Gord

When I click on the data stick icon on my desk top a window comes up. It lists the various events that I have exported. If i click on an event each picture shows up in a list. I can click on the picture and view a jpeg photo or view a avi video. When I export I select "original" as the file type. When I export to a DVD and klick on the the DVD icon the window shows up but it is blank.

Resolution problems exporting to DVD

I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
The sequence is originally from HD and the export settings are -
-Frame Size: 640x480 (4:3)
-Pixel Aspect Ratio: 1440x1080
-Exported using QT Conversion NO COMPRESSION
(There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
I had to have missed something.
ANY suggestions are greatly appreciated.
Eric
Power MAC G5 Mac OS X (10.4.7)

The footage did come from an HDV from Sony.
I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

Getting audio only when exporting to camera

Hello. I have exported many times before but when I recently tried to export to camera, I get audio only. I tried deleting the iMovie Preference file (which I had to do at times in the past) and then I got some video with audio at the beginning but then the video stalled while the audio continued.
The iMovie material (which I have already exported to DVD) that I am trying to export to tape is from a DVD which I had converted to DV through Toast and edited in iMovie if that makes any difference.
I'm using iMovie 6.04. Any comments will be appreciated.

Hi, Rich,
I just select QuickTime from the Share option in the menu bar, not Export from the File.
It gives the options of Full Quality, CD-ROM, Web streaming and Email and Expert Settings. I always leave it as Full Quality. I just tried it now and when I select 'Expert Settings,' nothing happens until I click on 'Share,' and then I see the options of how to export and what format to use. Selecting Movie to DV Stream, I then have to change from the 'Most Recent Settings' to get the options of either PAL or NTSC settings for 32, 44.1 or 48 kHz...those are sound settings for audio.
Frankly, I find it much harder to do all these setting changes when Share to QT as Full Quality has always produced a great movie that is equal in quality to the original iMovie.
I have been doing it this way since the first iMove came out. It has always been known as a loss-less method. Frequently, my iMovies are complicated with many video and audio clips. With earlier versions, whenever iMovies became complicated, the playback would skip, stutter or the audio would freeze or become distorted. I learned from experience that the burned disks and disk image files would be fine, but it was hard to finish the edits. I learned to edit the video clips, add the still photos, transitions and titles, add just some audios if I needed a few seconds of sound under the still photos, and then export the movie as the Full quality quick time movie. Then, take that qt movie into a new iMovie and then add the audio. Worked every time. The new qt movie always played fine......unless I got too many more clips, and then I just made a new qt movie at that point. I also always use the qt version for exporting back to miniDV tape because the stuttering version usually would not export, or if it did, the stuttering would persist and ruin it.
Good luck with your projects!

Problem exporting to mpeg-2 DVD format from Premiere Pro CSF

I just purchased Premiere Pro CS5 and have been going through the video tutorials on Lynda.com. I have created a short video sequence and am trying to export it to mpeg-2 DVD format using the default "MainConcept MPEG Video" codec. After the video is exported to my hard drive and imported into Encore, I see all of these green lines and green shading in the video I just created in Premiere that wasn't there when I rendered my sequence in Premiere prior to export. Does anyone know why these green lines and shading are added to the video? I figure I must be using the wrong export settings in Premiere Pro.
I've also tried to export this video segment to Quicktime .mov format using the default DV25 NTSC codec, but when I do this the final exported video has audio only and the video is black (I made sure there was a check in the Export Video check box).
I have a Macbook with 2.2 GHz Intel Core 2 Duo processor, 4 GB 667 MHz DDR2 SDRAM and Max OS X version 10.6.3 (Snow Leopard) with all appropriate updates. Does anyone have any ideas on how to address this issue or where I can read up on appropriate combinations of video formats and codecs?

Hi, thanks for the answer. Yes, I just tried importing the Premiere project directly into Encore using the dynamic link function and it worked just fine. Once I made some changes to the to the Premiere project; however, the green lines appeared when i would preview the project in Encore. Based on your feedback, I won't worry about the extra green lines though and will attempt to build another DVD. Like you said, I think the key is to import the Premiere project into Encore using the dynamic linking.

PP3 CS3 EXPORT HALF FILE SIZE ONLY ,SHRINKEN FILES FIT SINGLE LAYER DVD ONLY

Hi!
I've regently upgraded up PP3 CS3 , Which was exported half of the files size only . I created 1 hour video/audio project on PP3 , then EXport to Encore CS3 , and check Encode setting , at the bottom right side ( ESTIMATE FILE SIZE) is about 2200 MG .Event I switched Sinle layer or Dual layer the files size Estimated the same amounth .
I created anather 2 hour video/audio project,Exprt to Encore cs3 , Estimate file size about 4 gitbite , It fited single layer 4.7 dvd only
The DVD quality play back on DVD player is only half of the original footage .
Encore cs3 is the same issue , when I forced double file to 8 gibite to burn dual layer DVD . It got error (unlimited of disc).
I could not find any setting to make it work on PP3 cs3 and Encore cs3
I have previous PP2 , It could not build straigh 2 hour DVD , But It could make 1 hour each time with original my footage or very close I'm happy with that ,Build ISO folder , each file is about 4 gibite then I used 3rd party software NERO 7. put 2 DVD together about 8 gibite and burn to Dual layer DVD
I red manual book on page 42 encore cs3 , they do not make daul layer
I paid upgraded PP3 CS3 and paid full price Encore 3 . They 're not worth what I invested ,
Any help will be wellcome . Thank you

Hi Millaard
I repeated again build my project in PP3 1 hour and 8 munite long video , Exprot Encore , I selected following setting as Type : DVD doule layer,
Direct burn without menus
Encoding setting : Preset :NTSC progressive high quality
or Medium qality
Video codec : Main concept MPEG VIDEO
Birates setting : VBR , 1 pass
minimum : 1.5
target : 4.
Max : 7.
GOP : M frame 3
M frame 15
Estimate files size : 2684.98 Mb
That 's all the setting I did , Whatever I swicthed single layer or double layer , the export file estimate no change .
If I tried longer video 2 hour , the estaimate file size is about 4. MG ,PP3 shrinken video file to fit single layer DVD 4.7 . The file size of 2 hour dvd good quality is about 8 gibite for dual layer DVD
The other option in PP3 did not work for any 3rd party sofwarer ,
It did not build ISO folder , and MPEG2 dvd did not build Video-ts at the root of dvd folder ,and both video and audio is splited could not use third party software , they exprot to Encore cs3 only
Then Encore did not burn more than 4.7 single dvd for 2 hour long half of quality
Millaar ; Please tell me what's your setting? and how many mb did you build on sing or dual layer ? Have you tried any yet ? Thank you

How can export on CD or DVD only edited photo in iPhoto

How can I export on disk (CD or DVD) only edited photos in iPhoto11? When I going to Share-Burn, all masters, edited, thumbnails etc. was exported what makes big mess if I going to print some of them.

The Share ==> burn command makes a mini iphoto library for use by iPhoto which includes multiple versions for the photos - for other uses export the photos to a desktop folder and burn that folder to CD/DVD
LN

Column headings are mismatched when export to excel (Data Only)

Hi All,
We have an old Crystal Web Portal designed using CE10 in VS 2003.   The crystal viewer shipped with VS 2003 exports to excel (Data only) in correct order where all the columns headers are matched with the corresponding data.
We have re-written the entire new web portal in VS 2008 with using CE10 on windows 2003 server. Everything works we can view the report, page navigation, export to PDF, export to MS Excel 97-2000.   However when export to MS Excel 97-2000 (Data only) option, the column headings are mismatched with the corresponding data.   I don't understand what changed between VS 2003 Crystal Viewer and VS 2008 Crystal Viewer.   I think this has to be the crystal viewer problem because I'm exporting from the viewer tool bar.
Here is the API referencing in the code:
In Visual Studio I'm referencing all CE10 10.0.3300 version api's. Howerver since Crystal Viewer with VS 2008 is newer and has 10.5.3700 version I'm using CrystalDecision.Shared and CrystalDecision.Web are version 10.5.3700.   These seems to have no problem. The entire web portal works fine.
More about Web Portal:
-User is validated upon login with CE10
-use selects the report from the list
-Report ID is then passed to reportdocument
-reportdocument API loads the report and
-Viwer.reportsource= reportdocument.reportsource
We cannot update Crystal Enterprise 10 right now.   I'm in the middle of deploying new web portal with VS 2008.   I have to resolve the Export excel (Data only) option and have the column headers matched with the data in excel.   I have tried everthing.
Can some help here.
thanks

Hi,
The report saves the printer information and if it can connect to the exact same printer then the print options will get passed to the printer.
If the report is being sent to a different printer, Crystal doesn't know if this new printer will support the same settings, ie. duplex or color. In our case we were setting the report to print duplex printing and landscape. When our application went to print it actually crashed because some of the printers didn't support duplex.
What we did is disable the print button on the viewer and added the PrintDialog control to our form. Use the ReportDocument.PrintOptions method to set the properties for the PrintDialog control.
var printDialog1 = new PrintDialog();
printDialog1.UseEXDialog = true;
printDialog1.AllowSomePages = true;
if (myLink.Parent.SavedPrinterSettings != null)
     printDialog1.PrinterSettings = myLink.Parent.SavedPrinterSettings; //Use any saved printer settigns
     printDialog1.PrinterSettings.Copies = Convert.ToInt16(copies);
     dr = printDialog1.ShowDialog();
     if (dr == DialogResult.OK)
     myLink.Parent.SavedPrinterSettings = printDialog1.PrinterSettings;     //Save the latest printer settings
     nCopy = printDialog1.PrinterSettings.Copies;               //Get the number of Copies
     sPage = printDialog1.PrinterSettings.FromPage;               //Get the number of Start Page
     ePage = printDialog1.PrinterSettings.ToPage;                    //Get the number of End Page
     myReport.PrintOptions.PrinterName = printDialog1.PrinterSettings.PrinterName;     //Get the printer name
     myReport.PrintOptions.CustomPaperSource = printDialog1.PrinterSettings.DefaultPageSettings.PaperSource;
     if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Vertical)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Vertical;
     else if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Horizontal)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Horizontal;
     else if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Simplex)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Simplex;
Hope this helps,
Brian

Weird Screen Bloches..only when backlight is on

i was watching a video one day then suddenly little pixels went grey and blocked out part of the screen. and they gradualy got bigger. now its about the size of a unpopped popcorn cournel. and it jumped to the right side of my screen. its weird cause its only when the back light is on that is it visible.
now the splotches are permanent and won't leave

I have the same problem. It started a month or so ago same as yours and has not gone away yet so I think its here to stay.
I noticed at first if I pushed on the screen where the line was at it would break the line up. Mine also has a line all the way across the screen about a quarter way down the screen right in a bad spot to view vidio. I was thinking of contacting that repair site that i saw someone posted, it says they repair the lcd screen for $65. thinking of calling them.
here is the address if anyone else wants to check it out.
http://nftechservices.com/iPod%20Service.html

MSI K8t NEO + Audigy Boot Problem only when power is unplugged on the PSU

I ran into a really weird problem today.
I switched the ps off by reaching back and pressing the button. I repress the button to power on the ps, then I click on the button in the fron of the case to power up the machine. System keeps rebooting itself every 1 sec. Bracket shows 4 red lights. In the manual, it says it means bad cpu. I remove the audigy and it boots fine. I install the audigy, 4 red lights.
So, This time instead of turning the puter off by using the button on ps. I used the button on the case by holding it down for 5 seconds. I reboot and puter boots normally.
So the problem is, if i turn the puter off by using the button on the PS and with audigy in the syste. Nothing on screen, and puter keeps rebooting itself every one second. Solution is to turn the puter off by using the button on the case.
Has anyone ran into this problem? I have never had this kind of problem. It is really weird. Any feedback is apreciated.
Oh and it is only with audigy. I tested this with original live, and also other PCI cards like nic, and another cheap sound card. Non of these cards showed this problem.

Cavemankr!
I never knew you could shut down the computer by holding down the start button for 5 seconds.... well I've never really had the need to...until I got this K8T Neo job. I wondered why it wouldn't turn off when I just pushed it. I've been using the PSU switch with these problems.
Yep! She booted right up. Audigy back in action. I also realized I had my PC hooked straight in the wall (while checking to see if my surge protector was working this weekend), so turning off the surge protector wasn't cutting power to the cheapo PSU.
So put me in your camp!
I'll just plug the PC straight into the UPS and keep power fed to the Enermax. I hope that was the cause of my keyboard/mouse cold boot problem also.
I'll assume the cheapo PSU will behave similarly. I don't really want to go through the swap again.
I wonder why that happens!
Buddy
Vor uns liegt ein weites tal
Die sonne scheint mit glitzerstrahl

Weird Problem Exporting HD to DVD (only when camera moving)

Similar Messages

Maybe you are looking for