Weird problem P965 Platinum (Solved)

This is my first post, so helo to everybody.
I bought a P965 Platinum board a week ago. Yesterday I decided to update to v1.1 bios which I downloaded from the Global Site (latest version). Since then I have a very weird problem. My keyboard does not work unless it goes into Windows. I tried 2 different PS2 and another 2 USB keyboards but the problem is the same. Before then everything was OK (e.g. I entered numerous times into the bios in order to manage to install the XP SP2 onto a raid0 configuration!). Any suggestions (except from just wait for a new bios release)?
P.S. I searched for similar topics before I post but found nothing similar. Thanks in advance
My config:
C2D E6600
MSI P965 Platinum
ATI X1900XT
2*512MB Corsair 800
2*Raptors 36GB Raid0
2*320GB WD-KS
1*DVD, 1*DVDRW...

Quote from: burianek on 12-May-07, 02:52:47
I had the exact same problem with my keyboards / P965 Platinum, although mine started when I used partition magic to resize my windows partition.
No keyboards (usb or ps/2, didn't matter) would activate until halfway through the windows load screen, making it impossible to change boot order, get into bios, etc.
Was seriously a very scary problem.
Did exactly as BOSSKILLER suggested. Updated bios to latest version 1.4 within windows using live update. Turned off machine. Unplugged power cord. Cleared CMOS. Booted, (keyboard worked! :D) got into bios, loaded defaults. Rebooted into bios, reset all of my settings and presto! Perfect again.
Thank you guys so much. This helped immensely. I was not looking forward to taking apart my new machine to send in the motherboard for service at all.
"Did exactly as BOSSKILLER suggested. Updated bios to latest version 1.4 within windows using live update. Turned off machine. Unplugged power cord. Cleared CMOS. Booted, (keyboard worked! :D) got into bios, loaded defaults. Rebooted into bios, reset all of my settings and presto! Perfect again."
dunno where did you saw that, but i never suggest using LiveUpdate to update BIOS.
"Thank you guys so much. This helped immensely. I was not looking forward to taking apart my new machine to send in the motherboard for service at all."
you are welcome.

Similar Messages

Help overcloking problem P965 platinum and ballistix tracer

i jut get a new set of curcial ballistix tracer to change my old corsair TWIN2X2048-6400, the problem is that before i could get a stable 3.2 fsb 405 memory ratio 1:1, but now even at 2.8 the pc is unstable, i try to set the memorys at 4-4-4-12 and 5-5-5-15 but it wont boot whit the fsb at 400, if i not overclock i can set it a 4-4-4-12 at 1.9v and work without problem.

try messing with memset http://www.tweakers.fr/memset.html. with that you can change timings in windows, if your system doesnt hang when you apply the timings it should post. i had to do that to correct my timings when i underclocked my memory to achieve a post.

Midori + weird problem(?) = FAIL [SOLVED]

When i try to acces to my inbox e-mail (or whatever) in www.mail.com i got a blank page. But the interesting is that when it starts (first 2 secs) it seems like are loading perfectly... and then blank.
Anyone use Midori and that mail service?
I hope you can help me, first days using Midori and i love it.
Last edited by teh (2009-10-24 04:41:35)

Have you tried changing Midori's useragent? If you open Preferences, I think its under Network.

MOVED: Help overcloking problem P965 platinum and ballistix tracert

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=116840.0

try messing with memset http://www.tweakers.fr/memset.html. with that you can change timings in windows, if your system doesnt hang when you apply the timings it should post. i had to do that to correct my timings when i underclocked my memory to achieve a post.

Power problems... P965 Platinum

So I updated my system with new motherboard and CPU.
Case: Sonata Antec II Piano with Smartpower 2.0 450W
Motherboard: P965 Platinum
CPU: Core 2 Duo E6600
MEM: 1x 1GB 800MHz
I was short of money that's why I only bought certain new parts.
After installing the mobo and CPU, I plugged in the main power cord to the PSU and switched the power on from PSU (but not from the power button on the case) and the case and cpu fan started spinning and the DVD-drive can be opened and closed. Now this is weird as the computer is not on yet. When I do press the power button, the leds indicates that the system is on but nothing happens (the fans and dvd-drive are still working). So I think there is bad cabling etc.
I tried re-installing everything but the same thing happens again. Now I have only the CPU + heat sink, graphics card (geforce 7300), RAM and the D-bracket installed.
The cabling goes like this:
the 24-pin power is plugged to JPWR1
the 4-pin power is plugged to JPWR2
the 4-pin power is plugged to JPWR3
the reset switch, power switch and hdd led are plugged in to JFP1
the speaker and power led is plugged into JFP2
the D-Bracket is plugged into JDB1
So does anyone have ideas why the fans start spinning when I switch the power on from the PSU switch? Have I missed something I need to do in order to make the system work? I've done everything exactly like the manuals tells me to do (I'm writing this from school, so I do not have access to the system, hopefully I remember the cabling correctly).
thx

> hmm.... did you save the BIOS settings before?
Nope, I'm not able to save the BIOS Settings at all. No matter what the settings are (Defaults, modified,...), After saving the settings, the computer just won't boot. I need to clear CMOS in order to get back into BIOS after saving the settings.
I think this might be caused by the fact that it saves the FSB to 266MHz (1066MHz) (during boot it displays the message that "266mhz system bus processor is not supported <....> System will use reduced 133MHz bus instead.) So after saving the settings (and FSB to 266MHz), the system is unable to boot. I cannot change the value to 133MHz from BIOS (this is what I tried, so that I would be able to test if the FSB setting is the one that makes it impossible to boot after saving BIOS settings), it can be only between 200-500MHz.
I'll test more powerful / other PSU in couple of days, MSI's support suggested that. Hopefully that will solve the problem.

Weird problem with power shut down msi nforce 4 platinum

recently i have flashed the latest bios 1.9 of msi nforce 4 u platinum, everything work fine untill yesterday.some stanges happened......
my power doesnt have a on and off button on it ,every time i turn off the pc , i have to turn off the power button of a socket near by the pc.everytime it works fine, but yesterday when i turn on the power on button of that socket , the pc automatic start, i didint turn on the power button of pc, what a weird problem.. also when i go into os , the system time also changed, although i can turn them back to correct one in bios and os, but when i turn the pc off , it changed again... could any one help me out , what is teh real problem of my pc. some virus ?thanks a lot.
weird problem with power shut down msi nforce 4 platinum

it seems the first question has been solved. cos today when i turn on pc, the oc set up is gone ,in bios, it back to the original set up.i cant save my oc setup, so it definitely a battery problem!!!!!!!!!!!
i take the old battery t o a saler , there they massure it with voltmeter, it shows only 0.97v, but in bios 1.6 it shows 1.82v, so waht is the real meaning of that reading num in bios for battery?it cant be the real voltage of the battery. i buy a new one ,this one is maxcell 2032 hitachi, the old one is shi t panansonic 2032 .the new one shows 3.17v with voltmeter, then i come back , installed the new battery , in bios this time it shows 2.3v in bios 1.6. so the reading num in bios for battery is definitely is not a real reading for your battery.
i will keep my pc in 24/7 using , and i will look if the battery is sable or not , cos untilll now no one come out for a real explain for this stupid battery problem of msi nofroce 4 platinum.i dont want change battery every 2 or 3month, what a real sick of this!!!!

P965 PLATINUM / REALTEK network adapter connectivity problem

hi,
I cannot connect my PC with my laptop using a crossover ethernet cable. All of the crossover cables I have tested operate as expected when used to connect other computers. A fact that complicates things more is that the connection status is indicated as "connected" in the network connections window but no packets are received at all.
My configuration:
MSI P965 PLATINUM (flashed with v1.2 BIOS)
OS: Windows XP PRO SP2
REALTEK driver version: 5.654.721.2006
Network IP, mask and gateway are manually assigned.
Note1: The network adapter works totally fine when connected with my router using a straight UTP cable.
Note2: My brother's PC (which has exactly the same configuration as mine) has the same problem.
Thanks in advance

Thank you all for your tips.
Please note that network file sharing is enabled. If I use my ADSL router as a gateway (it is 192.168.1.1 as you can see in the ipconfig commands output) the computers do communicate.
Problems arise when I use a crossover or straight cable to connect directly my desktop and laptop. Some things I have tried:
- I have disabled the firewalls on all computers.
- If I ping the localhost (127.0.0.1) I get packet replies. However, when I ping the other host I get timeouts.
- I have set the connection speed manually from the device manager to 100mbit/full. Still no good.. :(
P965 PLATINUM (DESKTOP PC)
Code: [Select]
C:\Documents and Settings\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : desktop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-16-17-EF-3B-04
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
ACER ASPIRE 1403 (LAPTOP)
Code: [Select]
C:\Documents and Settings\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/100 Network Connection
Physical Address. . . . . . . . . : 00-02-3F-B1-F7-89
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.99
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
Is there any utility to check my network adapters? It is a VERY weird situation, because on both adapters the green light is constantly ON, and the orange flashes from time to time. I assume this means that on hardware level everything is fine. Moreover, I cannot believe that there is a firewall/AV that interferes, because even if I shut them down, I still can't ping the other host.
Thanks in advance

P965 Platinum and Realtek RTL8111B problem

I have a dual boot setup on my computer: Windows XP and Fedora 7 Linux.
After booting Windows XP I will have to COMPLETELY UNPLUG the power supply from my computer before booting to Fedora 7 Linux. The reason: If I simply reboot or turn off the computer (simply turning off does not remove the power from the mainboard), then the Realtek RTL8111B onboard LAN is left in a state which prevents Fedora 7 Linux from being able to use the LAN. Fedora simply reports the LAN is not available. The solution, which I find unacceptable, is to completely turn off the Realtek RTL8111B on the P965 Platinum and use an old Realtek 8129 PCI network board.
A better solution would be for the MSI BIOS to reset all of the Realtek RTL8111B LAN chipset's bits to a valid state so that Fedora 7 Linux would be able to properly recognize and use the onboard LAN.
Again, if I COMPLETELY UNPLUG my computer's power supply Fedora 7 Linux always finds and uses the onboard LAN. It is only after using Windows XP and rebooting to Fedora 7 Linux without completely unplugging the power supply first that there is a problem. This would seem to indicate the MSI BIOS is not resetting the Realtek RTL8111B onboard LAN chipset to a clean state when it initializes the system upon booting.
I am using MSI P965 Platinum BIOS version 1.4
John

Uhm, I'm having exactly the same issue under linux.
The router's led will stay off and it looks like there was no network cable connected (Realtek Ethernet controllers are insmod'ed and everything looks fine).
The only thing I haven't tried is unplugging the power supply's cable ... weird.
I'm also upset about this problem >:(
MSI P965 Platinum - BIOS v1.4

P965 Platinum Bios problem

Hi i have P965 Platinum with PD 915 Processor and i have a problem with the recognizing the second core
When i was with the Bios version 1.1 the system was unstable because the ide DVD-RW was working in pio mode
after i've updated the bios the problem was solved and the dvd is now in u;tra d.m.a mode but now in the dual core center cpu usage 2 is N.A also the task manager shows only one CPU usage.In the bios is no option for changing that .Where is the problem .
Thanks!

Thanks for the reply
First of all i will describe my mashine :
MSI P965 PLatinum
Intel PD 915 2,8Ghz 2x2
PSU Model LPK12-450w dont know the brand sorry - 3,3V- 25A ; 12V-18A
VGA Sapphire Radeon x1600 Pro 512Mb PCI-E
Memory : Buffalo Select 512 MB DDR2 533Mhz
Hdd:320 GB Seagate Barracuda 7200.10 Sata2 (in ahci mode)
DVDRW :LG GSA-H10N Ide
After updating to the 1,3 version of the bios and your advices(only the mps table was 1,1 and i move it to 1,4) i still have the problem .Is it possible that my Cpu is broken?
Thanks !

P965 Platinum/Realtek RTL8111 Connectivity Problems

I have a P965 Platinum that has the on board Realtek RTL8111. I have had it since Dec '06. I have the latest Win Xp. Driver 5.658.814.2006. From the beginning I have had connectivity problems. I have stripped the motherboard of all non-essential components and I have installed XP multiple times.
Almost every time I boot up, and windows comes up, I get a Limited or No Connectivity error. Notice I said 'almost' every time. Sometimes I get connected right away. I thought it might be a loose cord, and noticed that the left LED on the back of the LAN jack was blinking. Which according to the manual means that it is talking. I wiggled the cable around to see if it was a bad connection, nothing. Then I replaced it and I connected. Unfortunately when rebooted, it wasn't connected again. After trial and error, I soon realized that by unplugging and re plugging the cable back in I could eventually get it to connect, which it eventually did every time. Bad connection right? Now here is the weird part, if I disable and enable the local area connection under Network Connections in windows enough times eventually it connects! Here is exactly what I do: First I disable it and then enable it again. If it takes more than a couple of seconds trying to connect, I know it will fail. So I keep doing it until it works. I thought it was a BIOS or driver issue and being such a new board I thought I should just wait. No other computer of mine has this problem.
Thanks in advance for any help or advice.

Quote from: Puffnstuff on 25-April-07, 10:09:14
Have you tried using another cable to rule out the possibility that your cable is bad?
Yes, I tried a new cable. Same effect. Now of my other computers have problems with the cable or connection.
Quote from: HenryW on 25-April-07, 10:09:23
Have you tried the updated Realtek drivers from MSI (5.664.0205.2007)? Dated 2007-04-20
HERE
Yes, I tried those drivers which are also on the Realtek website. The funny thing is that it connected the first time! Unfortunately when I tried it again (reboot and restart) it did not connect. So the driver upgrade did not fix the problem.

Weird problem getting P965 Plat to post

So I recently inherited a pc from a friend that decided to move across the country... He said it's never worked after he put it together and he believed the mobo was to blame. So I do some bench testing with just cpu, video card and memory... and always no video, no beeps, and D-bracket always halts at Processor initialization (R,G,G,R).
Then I discover that if I turn the psu off then on really quickly and then power on right after... it boots up fine. Minus the fact my ps/2 keyboard isn't reecoognized... but I read that is a common problem? So I'm hunting down a usb keyboard to try. But what could be causing the pc to only start up after a quick power supply reset?
Specs...
Intel Core 2 Duo E6600
P965 Platinum
1x Kingston 1GB DDR2-800
EVGA Geforce 8800 GTS pcie
# Hard drive(s) brand, size, type, speed (eg 2x Seagate 200gb SATA150)
OCZ GameXStream 700W PSU +3.3V(36A), +5V(30A), +12V1(15A), +12V2(15A), +12V3(15A), +12V4(15A)
Thanks for any help!?

Quote from: akinnetz
OCZ GameXStream 700W PSU +3.3V(36A), +5V(30A), +12V1(15A), +12V2(15A), +12V3(15A), +12V4(15A)
Check out the reviews:
http://www.newegg.com/Product/ProductReview.aspx?Item=17-341-002
It seems to be a "great" PSU.

DVD Burner problem with P965 Platinum

I have had on going issue with my DVD burner. When i try to play or esp burn a DVD the whole PC slows down and i am unable to open or run any other applications. The Burner is connected via IDE cable and i have tried 2 other DVD Burners with all the same result. When i play a DVD the picture jitters and when i burn a DVD the burn rate is about 10 x slower than my other PC. It comes across as if there is a data transfer problem, not sure though.
Could this be a bios issue or maybe a faulty IDE port on the MOB ???
My system
MSI P965 Platinum
Intel Core 2 Duo E6600
2 x 1GB DDR2 800mhz RAM
Leadtek 8800GTS 640mb G/C
W.D SATA II 320GB HDD
ASUS DRW-1612BL DVD Burner

I would also like to add that, this fix has also fixed my Lan input port. I built this PC about 3 weeks ago and from day one the Lan connection would come up with that "Limited or no connectivity" issue. So I thought it was a faulty Lan port so I went and bought a PCI Lan card to fix that issue.
But as soon as i applied this fix, I noticed the network connection popped up so I tried it out and the damn thing now works.
Extremely Happy
cheers

P965 Platinum booting problems

Hi all,
I have a serious problems with stability of my system. It seems to behave pretty randomly. Every now and then when the power button is pressed the system seems to start booting up for 2-3 seconds, then suddenly turns off and re-boots again. If everything goes ok windows is loaded and sysem is pretty much stable. However every one in five booting attempts ends up with system trying to boot a couple of times, getting on and off constantly so there is not even a chance o get to BIOS. After some time the POST screen shows up saying that an overclocking attempt has failed and system will be restored to te defaults. The story is that there has never been an overclocking attempt whatsoever since I can not get he system running stable at stock settings!!! Anyway, I get finally to BIOS but sometimes next restart of the system occurs and the story is all over again. When I finally get to the settings and restore the defaults the system will reboot alright and for the next couple of times it will turn on normally untill the next doggy start forces me to get to the BIOS and start al over again. Initially I thought that this is due to the fact that the memory runs at 667MHz(2x333MHz) when the FSB is set to 266MHz - FSB:DRAM 4:5. I changed it manually to 533MHz (FSB:DRAM 1:1) but the problem did no vanish. I also tried different memory timings set manualy and by SPD but it also failed. At this stage I used up all my ideas and really do not know what to do know. The memory I have is pluged in in slots 1 and 3 for dual channel operation.
I bought this motheroard to get fast and stable system that will not failed during week-long simulations and I'm very dissapointed with what I got so far. Below are my system specs:
Intel E6300
MSI P965 Platinum
Corsair 2x1024 PC 5300 matched
NorthQ 4001 400W PSU
Gainward GeForce 7300GT
WD SATA 250 GB
NEC DVD-RW AD 7173
Windows XP Pro SP2
I hope somebody can help me or at least give me a hint where to look for solution.
Thanks

Quote from: walus on 26-December-06, 20:33:35
Hi all,
....... The memory I have is pluged in in slots 1 and 3 for dual channel operation.
the only way I have no problem with this mobo is putting ddr moules in slot 3 and 4 (no dual channel)

Msi P965 Platinum with Vista Premium 64bit big problem

hi i cant run vista properly, i get blue screen dumps that dumps memory.
Some time it can run 5min sometimes 2hours
Vista says that there is a hardware incompatiblity something with memory.
I have run memtest x86 it passed, and Vistas memtest fail.
tryed to run with only one memory and changed place to them
core duo center doesent work either.
now i run windows Xp with latest drivers and everything works just fine.
I want to run my computer on windows vista 64bit, whats my problem

Sad to hear about those problems, especially since I am going to upgrade to Vista myself in the nearest future.
I have no guarantee that this will work, but try using manual settings for RAM. And set RAM to 5-5-5-15, not 4-4-4-12. And run RAM at stock speed, and the same goes for FSB etc.
And try using 2,1V for the RAM.
If you have runned on manual settings, set the to "Auto" if you haven't tried that.
I have read abuot one guy that got bluescreens all the time when he overclocked in Vista. You haven't overclocked, have you? :P
EDIT: I see you use BIOS v1.3. Try flashing to v1.2.
I flashed from a bluescreenfree system at high overclocks (v1.2), to a instable system vith plenty of bluescreens when exeding 340-350FSB.
With BIOS 1.2, I have booted with FSB 389, and been able to run SuperPI, CPU-Z and some other small programs. Now, with BIOS 1.3, I can't get into windows, get bluescreen before logon is complete.
I think there is something "wrong" with the northbrigde in P965 Platinum, because the errors are allways memory related.

P965 Platinum ethernet driver problems Vista 32bit

Hi there.
I have some serious problems.
I got a MSI P965 Platinum Mainboard a few days ago. Installing everything form start using Vista Home Premium 32bit. The included CD does not contain drivers for Vista, but Vista found almost everything, except Firewire and the onboard Ethernet controler.
Beside the Mainboard, only a PCIex16 VGA card (Expert Vision 8500GT Super) is connected to the board.
Got the driver for the Ethernet controler at MSI´s homepage for Vista32 bit, BUT!
Everytime I try to install it, I end up with an errorcode 10 (device fail to start).
The Mainboard arrived with firmware 1.3 I just upgraded to 1.4 - Still same result.
Ethernet is enabled in the bios.
Can anyone tell me what the heck is wrong?
Greets
Kandersen.

Get the drivers from the chip makers websites.
ftp://driver.jmicron.com.tw/jmb36x/Win2k_xp_Vista/JMB36X_WinDrv_WHQL_R1.17.20.03.zip for the jmicron ide/sata controller. (install raid/scsi driver even though not using in that mode)
ftp://209.216.61.149/pc/audio/Vista_R170.exe for sound. (Realtek HD Audio)
ftp://61.56.86.122/cn/nic/WinVista_6195_NIC_8169_8168_8101E_06292007.zip (realtek ethernet)
http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/13499/a08/infinst_autol.exe&agr=N&ProductID=816&DwnldId=13499&strOSs=All&OSFullName=All%20Operating%20Systems&lang=eng
(Intel inf)
http://downloadcenter.intel.com/T8Clearance.aspx?sType=&agr=N&ProductID=2101&DwnldID=13494&url=/13494/eng/iata75_enu.exe&PrdMap=&strOSs=All&OSFullName=All%20Operating%20Systems&lang=eng
(Intel Matrix Storage Manager. Do not use if set to IDE in BIOS for Intel ICH8R controller.)
Make sure ethernet port not disabled in the BIOS.

Weird problem P965 Platinum (Solved)

Similar Messages

Maybe you are looking for