Weird problem w/AX as client on existing WiFi ...

So, I recently moved to a studio attached to a house that has a wireless network and have no problems seeing the network and getting on it to get online and such. I also have an AirportExpress which I used for a wireless network at my previous home and was connected via ethernet to the DSL modem. This is a basic set up. I was able to listen to music on my stereo through AirTunes, print, browse the internet, blah, blah, blah.
Now, I know my equipment is capable of becoming a client of an existing wireless network (COX cable highspeed) using the AirportExpress because I read it in the help topics. I did everything I'm supposed to and it works partially. The problem is after setting up the AX once I can no longer make any edits by selecting the "Configure" button because I get "error reading configration file ..." messages. I can get online but can't connect via Airport Admin Utility or iTunes. iTunes lists the speaker name but has the same problem hanging when trying to connect to the AX. The only thing I was able to do is just hard reset or factory reset the AX and set it up again but every time I did I got the same problem.
Please help.

So, I went ahead and messed with the Airport Express. It was sitting unplugged for about a month since the last attempt to getting it to work as a client of an existing WiFi network. You wouldn't believe it! Or maybe you would. It works now.
Here's the series of events: I plugged in the AX (my Mac was on and connected to the existing default "linksys" wifi), it started up and Mac saw the network. I opened Airport Admin, switched Airport to be connected to the AX and in Airport Admin I edited the settings for it to be a client of existing network (wasn't able to use encryption because both methods were'nt supported by the router). Left Mac alone and ate dinner, came back to Mac and saw that Airport was now connected to "linksys" but in Airport Admin it showed the AX, therefore, Airport was connecting to "linksys" via AX.
After many attempts prior, I never had that much success. Good sign. I thought maybe it was just getting online but AirTunes wouldn't work. Opened iTunes and had success with the Radio. Eureka!
All I have to say is, huh? But … it works now. That's all I care about.

Similar Messages

2008 R2 Remote Desktop Services Problems With Older RDP Clients

I recently deployed a new 2008 R2 server to serve as a Terminal Server (Remote Desktop Services) for about 30 people. The new server is replacing a 2003 server. I expected the new machine to be a considerable upgrade and was looking forward to happy people
and less problems. Reality is I am finding several unexpected headaches - discouraging considering the amount of money we have spent on the new machine.
Most of the users connect via HP thin clients, they are the T5510, T5520 and T5530 thin clients. What I have found is performance issues when connecting via these thin clients. I believe the RDP client on these thin clients is RDP 5.5 or earlier. And I do
not believe it is possible to upgrade the RDP client version on the thin clients - I guess they are to be seen as "disposable".
The performance issues are: black blocks appearing when connected - and I have deselected bitmap caching - makes no difference. When typing in certain places the display of the typed characters could not keep up with the user. And lastly I have a weird thing
that just popped up today; where if the user goes to Google it freezes up their entire environment - I cannot even remote control the user/session - why this came up today and was not a problem before I am not sure.
With all of the above issues I have found that the problem goes away or does not exist if I connect to the server using an RDP client on an XP or 7 computer. So I have to conclude the RDP client is the problem.
Does anyone have information on this? Is there anything I can do as far as configuration on the server to allow me to use these older RDP clients? Do I have any alternative other than buying new thin clients?
thanks!

From your description, I also agree that the problem may be in the top RDP client.
1.
HP Compaq t5510 Thin Client:
Operating System: Microsoft Windows CE.NET
RDP Client: Remote Desktop 5.1 Add-On
2.
HP Compaq t5520 Thin Client:
Operating System: Microsoft Windows CE 5.0
RDP Client: Remote Desktop 5.5 Add-On
3.
HP Compaq t5530 Thin Client
Operating System: Microsoft Windows CE 5.0\6.0
RDP Client: Remote Desktop 5.5 Add-On
We can try to optimize two ways.
1.
Upgrading Driver – Network for Thin Client
(1) HP Compaq t5510 Thin Client:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=420576&prodTypeId=12454&prodSeriesId=420575&swLang=13&taskId=135&swEnvOID=1054
(2) HP Compaq t5520 Thin Client:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=500833&prodTypeId=12454&prodSeriesId=500832&swLang=13&taskId=135&swEnvOID=2051
(3) HP Compaq t5530 Thin Client
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01087297&prodTypeId=12454&prodSeriesId=3341951
Upgrading RDP to the latest version of HP Web site.
Let thin clients use to connect to the Remote desktop server with low load.
(1) Open the Remote desktop client in customer’s Thin Client
(2) Click Advanced option. In choose your connection speed to optimize performance area, you can select the low load option. For example, modem(56kbps).
I noticed that you have deselected bitmap caching in Remote Desktop Client options, but makes no difference. You can try again. Then please remember disconnect idle sessions and rational allocation of resources in Terminal Server.
Technology changes life……

Weird problem with role assignment in Portal

Hi,
In our newly installed Portal for eRecruitment Production System we encounter a weird problem with assigning roles to users.
When I open User Administration and search for roles, it displays the Portal roles perfectly.
However, when I search for a user in User Administration and click on it when found, I am unable to find any roles to assign! So I am unable to find any roles, when I want to modify the assigned roles for a particular user, while the roles do exist and can be found on its own. How is this possible? Am I missing something here?
We have installed SPS 15 and use ABAP as user store. We have used reverse proxy and web dispatchers in this case.
Thanks in advance and best regards,
Jan Laros

Found some entries in the default trace from this morning:
#1.#005056A15F78006A000004F400006D310004520B11DB3CE8#1216107404407#com.sap.security.core.jmx.impl.CompanyPrincipalFactory#sap.com/tc~wd~dispwda#com.sap.security.core.jmx.impl.CompanyPrincipalFactory.static Set evaluateDatasourcesToSearchFor(String[] requestDatasourceIds,     String privateType, Locale locale)#JALAROS#58762##nun.efteling.nl_POP_9750151#JALAROS#581700b0524011ddc029005056a15f78#SAPEngine_Application_Thread[impl:3]_36##0#0#Error##Java###Error while connecting to remote producer {0}
[EXCEPTION]
{1}#2#PRODUCER_0KTHQ3YTJV#com.sap.security.core.persistence.remote.CommunicationException: Cannot display remote roles of selected producer. The producer has removed your consumer instance from their portal.
        at com.sap.portal.ivs.global.roles.RemoteProducerAccessImpl.sendToRemote(RemoteProducerAccessImpl.java:497)
        at com.sap.portal.ivs.global.roles.RemoteProducerAccessImpl.checkConnectivity(RemoteProducerAccessImpl.java:220)
        at com.sap.security.core.jmx.impl.CompanyPrincipalFactory.evaluateDatasourcesToSearchFor(CompanyPrincipalFactory.java:656)
        at com.sap.security.core.jmx.impl.CompanyPrincipalFactory.simplePrincipalSearchByDatasources(CompanyPrincipalFactory.java:3172)
        at com.sap.security.core.jmx.impl.JmxSearchHelper.getSimpleEntitySearchResult(JmxSearchHelper.java:74)
        at com.sap.security.core.jmx.impl.JmxSearchHelper.calculateSimpleEntityTable(JmxSearchHelper.java:1182)
        at com.sap.security.core.jmx.impl.JmxServer.calculateSimpleEntityTableByDatasources(JmxServer.java:1061)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
        at javax.management.StandardMBean.invoke(StandardMBean.java:286)
        at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
        at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
        at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
        at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
        at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
        at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
        at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
        at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
        at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:776)
        at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
        at com.sap.security.core.jmx._gen.IJmxServer$Impl.calculateSimpleEntityTableByDatasources(IJmxServer.java:717)
        at com.sap.security.core.wd.jmxmodel.JmxModelCompInterface.calculateSimpleEntityTable(JmxModelCompInterface.java:396)
        at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface.calculateSimpleEntityTable(InternalJmxModelCompInterface.java:443)
        at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface$External.calculateSimpleEntityTable(InternalJmxModelCompInterface.java:746)
        at com.sap.security.core.wd.umeuifactory.UmeUiFactoryCompInterface.getSimpleEntityTable(UmeUiFactoryCompInterface.java:471)
        at com.sap.security.core.wd.umeuifactory.wdp.InternalUmeUiFactoryCompInterface.getSimpleEntityTable(InternalUmeUiFactoryCompInterface.java:517)
        at com.sap.security.core.wd.umeuifactory.wdp.InternalUmeUiFactoryCompInterface$External.getSimpleEntityTable(InternalUmeUiFactoryCompInterface.java:894)
        at com.sap.security.core.wd.relaterole.RelateRoleComp.searchNewRoles(RelateRoleComp.java:259)
        at com.sap.security.core.wd.relaterole.wdp.InternalRelateRoleComp.searchNewRoles(InternalRelateRoleComp.java:282)
        at com.sap.security.core.wd.relaterole.AssignParentRolesView.onActionSearchNewRoles(AssignParentRolesView.java:215)
        at com.sap.security.core.wd.relaterole.wdp.InternalAssignParentRolesView.wdInvokeEventHandler(InternalAssignParentRolesView.java:261)
        at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
        at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
        at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
        at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
        at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
        at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
        at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
        at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
        at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
        at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1257)
        at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
        at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
        at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
        at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
        at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
        at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
        at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
        at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
        at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
        at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(AccessController.java:180)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.#005056A15F780060000004FD00006D310004520C6A35F87C#1216113181849#com.sap.engine.services.security.roles.SecurityRoleReference##com.sap.engine.services.security.roles.SecurityRoleReference#J2EE_GUEST#0####399cb180524e11dd9849005056a15f78#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Security/Audit/J2EE#Java###{0}: Authorization check for caller assignment to J2EE security role [{1} : {2}] referencing J2EE security role [{3} : {4}].#5#ACCESS.ERROR#service.naming#jndi_all_operations#SAP-J2EE-Engine#administrators#
#1.#005056A15F78005C00000C0500006D310004520C6A394185#1216113181992#com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl##com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl#J2EE_GUEST#0####39aa6d20524e11ddaee2005056a15f78#SAPEngine_Application_Thread[impl:3]_29##0#0#Error#1#/System/Server#Java###Runtime exception occurred while processing external JMX request [ JMX request (java) v1.0 len: 150 | src: 2 target-node: 9750150 req: getAttribute params-number: 2 params-bytes: 0 | ]
[EXCEPTION]
{0}#1#com.sap.engine.services.jmx.exception.JmxSecurityException: Caller J2EE_GUEST not authorized, only role administrators is allowed to access JMX
        at com.sap.engine.services.jmx.EngineAuthorization.checkMBeanPermission(EngineAuthorization.java:88)
        at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:77)
        at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:98)
        at com.sap.engine.services.jmx.MessageClientSecurityWrapper.checkPermissions(MessageClientSecurityWrapper.java:76)
        at com.sap.engine.services.jmx.MessageClientSecurityWrapper.invokeMbs(MessageClientSecurityWrapper.java:38)
        at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:196)
        at com.sap.engine.services.jmx.ClusterInterceptor.getAttribute(ClusterInterceptor.java:512)
        at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:84)
        at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
        at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
        at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
        at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
        at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(AccessController.java:180)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

SAP GUI 7.10p15 weird problem on FB70

Hi all,
We upgraded SAP GUI 7.10 to patch level 15 from patch level 14 using the install server on our Windows XP machines. A weird problem seems to appear since then on FB70. You press once or twice the ENTER key, without filling any field on the screen and the GUI stays on a busy state forever (trying to constantly redraw the screen as to show an error message on missing account number). It results to 100% CPU usage on the client (Windows XP machines, tried on Windows 7 also with same result) and seems to also stress the SAP system a bit. The only way to stop that behavior is to use the Windows task manager and kill the busy window. I have not seen this behavior before and can't reproduce it in any other transaction until now.
I got access on a machine that was still on patch level 14 and works just fine. I did the upgrade and the same behaviour (busy, 100% CPU) instantly appears. Oddly enough, this behavior does not occur if I run FB70 throught the debugger (/h) in any case.
Have you seen something like this or do you have any clue why that weird behavior might appear?
Thank you very much in advance for any insight

Hello Artemios,
Yes, this seems to be a know issue with Patch 15. Please open a ticket on BC-FES-GUI to get a fix for that or wait until Patch 16 is released.
Kind regards,
Martin

StarForce GF FX 5700: weird problem

Since I bought this geforce I used the 52.14 drivers from MSI. After having troubla with a game, I had to update my drivers. After installing the 56.72 ForceWare-drivres from nVidia, I had a quite weird problem.
After booting my PC, I started Battlefield Vietnam, and got this: The menu
in-game (normally it's even worse)
I tried a few other games, but they all had the same problem.
I rebooted, restarted BF:V and everything was normal again.
But, with those newer drivers, I had the same thing every day. If I worked in Windows too long, I had to reboot before I could play my games (descent).
A few weeks later someone told me that the weird colors where caused by overheats.
Down-clocking (starting from the standards, I never over-clocked the card) didn't solve my problem. Then I realized that everything worked perfect with the 52.14-drivers. I re-installed the drivers from the disc (52.14), and yes, my problem didn't exist any longer.
The problem is gone (by using the 52.14), but I can't update my drivers, which is necessary to play certain games, without having to reboot to play.

i put a post up about my problem with my fx5700 and bf1942 earlier, but no one has responded as of yet. the 1st screen that was posted (all red) thats EXACTLY how my screen looks. i've tried the drivers that came with the card (dont remember the version off the top of my head) and the latest drivers both showing the red screen. did anyone come up with a resolution for this situation?

Weird problem during synchronization !!!??

Hi all
I came accross a weird problem during synchronization. I am into customizing MAM2.5, and in testing phase. I created 600 local measurement documents and tried to sync. Nearly half of the documents got successfully posted at the back end and got deleted from the hand held. Nearly 250 documents were not posted and it stays in the hand held. On multiple synchronization also it is not getting moved but it says "synchronization successfully completed". The state in the upload syncBO (040) shows the state of these documents as "S" that corresponds to synchronized documents.
any of you had come accross this problem?? any thoughts??
Raj

Hi Raj,
Now that a new development, If the device was restarted manually please do a client data reset. Settings-> client data reset.
I know you have tried doing this before but I want you to check the following.
This will ensure that the data in the client and the middleware are consistent.
Check the MEREP_MON when you perform the first sync.
Download requests must be sent from the client to the middleware (They will be in I-Finished status after processing) and the response will be found in O-Waiting. When you perform the sync the second time all the data is sent to the client. Now the data in the client and the server are in-sync. Now if you change any data and sync the data should be sent to the middleware.
If it still doesnt work your only option is to reinstall MI on the device and start from scratch.
Let me know.
Best Regards,
Karthik

Connecting through firewall (weird problem)

Hello,
I'm having a very weird problem with JMX on a Linux server. I'm aware of the fact that the out-of-the-box JMX agent doesn't work with firewalls and I'm using a custom agent or rather I'm trying to. The problem is that JConsole/Custom Client fails to connect to the agent with a NoSuchObjectException.
The Server side code looks as follows
public class TestServer {
public static void main(String[] args) throws Exception {
System.setProperty("java.rmi.server.randomIDs", "true");
LocateRegistry.createRegistry(15003);
MBeanServer mbs = ManagementFactory.getPlatformMBeanServer();
JMXServiceURL serviceUrl = new JMXServiceURL(
"service:jmx:rmi://localhost:15002/jndi/rmi://localhost:15003/jmxrmi");
JMXConnectorServer connectorServer = JMXConnectorServerFactory
.newJMXConnectorServer(serviceUrl, null, mbs);
connectorServer.start();
Thread.sleep(Integer.MAX_VALUE);
The Client side code looks as following
public class TestClient {
public static void main(String[] args) throws Exception {
JMXServiceURL u = new JMXServiceURL(
"service:jmx:rmi:///jndi/rmi://ec2-67-202-2-113.z-2.compute-1.amazonaws.com:15002/jmxrmi");
JMXConnector c = JMXConnectorFactory.connect(u);
The Exception I'm getting is
Exception in thread "main" java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.CommunicationException [Root exception is java.rmi.NoSuchObjectException: no such object in table]
     at javax.management.remote.rmi.RMIConnector.connect(Unknown Source)
     at javax.management.remote.JMXConnectorFactory.connect(Unknown Source)
     at javax.management.remote.JMXConnectorFactory.connect(Unknown Source)
     at foo.bar.TestClient.main(TestClient.java:12)
The Java version on the Server is
java version "1.6.0_02"
Java(TM) SE Runtime Environment (build 1.6.0_02-b05)
Java HotSpot(TM) Client VM (build 1.6.0_02-b05, mixed mode, sharing)

You were right. There was one more thing though which I figured out with Wireshark/Ethereal. The machines in Amazon's EC2 Network are running behind a NAT or something and I had to specify the external address with -Djava.rmi.server.hostname=BlaBlub.

Weird Problem: TC does NOT drop the internet connection

Hi there,
I recently installed the TimeCapsule without any problems and since then I am happily surfing wirelessly as well as backing up with Time Machine. However, there is a weird problem which I cannot seem to solve:
The TC is connected to my DSL modem, in the Airport Utility I have chosen under "Internet / PPPoE" to connect "automatically" und disconnect after "10 minutes". However, the connection is never dropped, basically because I can see that the Data LED on the DSL modem keeps blinking every 10 seconds or so, thus effectively preventing the TC from disconnecting.
I first thought the automatic time check (AirPort / Time Capsule) was the culprit, but this was not the case. Also there are no internet requests coming from the MacBook since the blinking (and hence the maintaining of the connection) persisted even with AirPort disabled on the MacBook.
So now the TC never drops the connection which is not was I prefer (I have to unplug the power supply of TC to really drop the connection). Could it be some "rogue" connection attempt to the TC?
Has anybody had a similar problem and maybe can suggest a possible solution?
Clueless,
Martin

Open AirPort Utility and select your Time Capsule. Click on Manual Setup and look at the Summary tab. It'll show you how many clients are connected to the TC. If it's more than one and you don't have an encrypted network setup on your TC, then it's most likely an outsider trying to use your Internet for free. Click on the Wireless Clients label on the Summary page to get a list of MAC addresses currently using the TC. If none of the addresses are recognized, then it's an outsider sniffing on your network.
It might be a good time to change the name/channel of your TC network and enable WPA2 Personal encryption with a strong 13-character password, using a mix of letters, number and symbols. Instead of using "dingleberry21", you can use "d!ngl3b3rry21" or something to that effect. Though not strong deterrents, you can also make your network a closed one and set up Access Control to only your computers at home.
Hope it's not an intruder.

WRT54G V6 weird problems

My WRT54G Version 6.0 is displaying a weird problem where when first plugged in i can access it just fine and the login popup shows the correct name for the router. After a few minutes it looks like it's still working, but it won't do anything more than let clients connect. When i try to login through the web, it shows the default WRT54G name in the login popup and using either my password or the default password won't let me login. I set it to factory defaults with the same problem after just a few minutes, even if i left it on factory defaults.

This sounds like some kind of poor connection between your router and computer. Please try the following:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 03-04-2008 01:36 AM

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

Iphone 4, having a weird problem /: can't seem to fix it!

So i have been having my iphone for a while, i have no warranty on the phone now. I have this weird problem that when i scoll down my messages and stuff i can see the outline of the message kind of show rainbowish colors that sort of show a bit when i scroll, right near the border of the message. its kind of annoying at times, also there are times when i press the home button, right when i get to my wallpaper, the outline of the letters when i text are there like very very faint, they disappear after for a while but then come back sort of like a glitch, and i cant fix it at all. then i would see faint horizontal lines, i would notice them when i use the camera, they disappear also. can anyone help me with this or suggest something?

Screen lag is normaly the LCD itself. But try restoring the iPhone. http://support.apple.com/kb/HT1414

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

Weird problem involving my external hard drive - help please!

I recently got a formac mini 120 gb firewire hard drive, which had been working fine with my g4 quicksliver.
i then went to a friends (g5 machine) with my drive and he put some data on it - bought it back to mine and managed to re connect the drive and take the data - no problem - very happy.
I recently gave my drive to another friend using a g5 and when it came back, nothing - i don't get the drive symbol appearing. turned the comp on and off many times and tried re-connecting etc still no drive appearing.
Then i took the drive to my friend with a mac lap top power book. connected there - working fine. Baffling. was happy that my data can still be accessed.
I know it's not the firewire cable because i can get power to the drive - i can see the red light at the fron on.
Can anyone help with this weird problem?
Thanks

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours might be the 10.4.10 Combo update. I have no idea since you did not fill out your specs. fully when you signed in to this site. Others reading, download the Combo that applies to your system. This link is for PPC Macs not Intel Macs.
If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Good Luck!
Cheers!
DALE

Weird problem when executing an update statement

Please help me out with this issue. This a very weird problem i'm facing while executing the following update statement.
update tblo.S_TABLE c
SET (ACCNT_NAME, ACCNT_LOC)
=
(select NAME, LOC from S_TABLE1 p
where p.ROW_ID = c.ACCNT_ID)
where ROW_ID = 'XXXXX'
The statement executes perfectly fine in "SQL Plus" but when i try from my application or any SQL Tool that uses ODBC, it fails with the following error
<eb1>ORA-00923: FROM keyword not found where expected
State:S1000,Native:923,Origin:[Oracle][ODBC][Ora]</eb1>
ODBC Driver Used: 9.2.0.2.0

Yes this could most probably be resolved by upgrading the driver. I'hv tried MS Oracle ODBC driver but that is even more problematic!
The applications works fine in another environment which uses a Merant ODBC driver. Thanks for your time and advice.

Weird problem when downloading the output to an excel sheet

Hi to all,
when i download the list, output by an alv grid, i observe a weird problem..in the excel sheet the last digit (10th digit) of the first col. which is delivery no., is getting truncated...0001802563 is getting downloaded as 000180256..couldn't understand why...when i use conversion_exit fm, the values are not getting truncated and downloading correctly...curious to know what's gone wrong in this funcationality? thanks all
cheers,
Shankar. M.

actually the problem is in the field catalog.if u can send me the code, i shall bug fix it for u.

Weird problem w/AX as client on existing WiFi ...

Similar Messages

Maybe you are looking for