Weird problem with my phone (nokia 5233).. :|

Hi,
I purchased a nokia 5230/5233 a month ago, everything worked fine until until the day before, at about 7:30 in the evening the day before, I discovered my screen wouldnt go into the landscape mode upon tilting, i restarted the phone, removed battery, formatted my memory card (could be a possibility of some corrupt 3rd party software install), later my friend suggested restoring the factory settings, I did so and everything was normal, the screen would go into landscape mode, but yesterday at around same time the problem recurred exactly after about 24 hrs, restored the factory settings and now things work... what could be this problem? can someone throw light into this?

Hi, it may have nothing to do with it, but have you cleared the privacy data in your browser since you got the phone ? It can use up a lot of phone memory and slow things down !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • I am having a weird problem with my phone every since it was updated this last time. I can sync movies from my computer to my iphone but any movies I buy with my phone I can not sync to the computer. But I redownload it to the computer and can then sync.

    I for the first time since buying my iphone and ipods for almost three years am concedering getting rid of them as I am getting tired of this problem. I can sync anything from my computer to the iphone. I can not sync movies bought on the iphone to my computer. I have tried everything and spent days trying to trouble shoot. I literally have bought hundreds of movies off Itunes but will not buy any thing else until I can figure this problem out. I have uninstalled Itunes reinstalled, troubles shooted using the itunes trouble shooter and reset my phone and nothing works.
    When I try to sync from my phone to the computer it says it can not be done because the iphone is not hooked up to the computer. I have only had these problesm since the new update not before. I have bought new cables twice to see if it helped and has not. Both my kids have Ipods, I have a Iphone and was planning on buying two Ipads for the kids for Christmas but not if I can fix this.

    You are correct.  Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases.  You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again:  Windows XP or Windows Vista/7.

  • Weird problem with my Nokia E50

    Hi guys!
    I don't know whether this topic has been discussed before but I have a very weird problem with my Nokia E50. The problem is as follows: whenever I receive an sms message my phone remains silent (no vibration or sound) even though vibration is turned on and the sms sound is chosen, the phone is at full volume too
    I've tried changing the profiles from General to Outdoor but the only sound I get is from keypresses
    I don't know what went wrong. I'm totally stumped. Any help would be greatly appreciated
    Darcorn

    hi
    I didn't update the firmware yet, and rebooting the phone didn't help.

  • I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

    I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

    Assuming you entered the correct WiFi password for your network, see these articles:
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • Weird Problem with X6, help please!

    I have got this weird problem with my nokia X6, it's display shows lines and merged colors when turned on. It started happening after I got my Nokia X6 fixed for broken screen, 15 days later after getting it fixed it started showing such display. I figured out somehow to unlock my phone while in such display horror and figured that opening a heavy app like OVI store brings back mobiles display. I don't want to send same people my mobile again. Just want to know what can be done to fix this problem. PLease Help!

    Yeah, it was a nokia care center. Anyway I fixed the problem luckily. It just needed some updates. I never thought not updating can cause this problem.

  • Apple Banned me, because of a very weird problem with my "Factory Unlocked"

    Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
    First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
    Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
    Here's my problem. Apple has exchanged my iphone 3 times.
    I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
    On October 20th, i recieved my second iphone, and then a bigger problem started .
    Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
    1.- Telcel
    2.- Movistar
    3.- Unefon
    OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
    And every time i tried to activate it, only got this message onscreen:
    http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
    I though something was wrong with my brand new factory unlocked iphone 4.
    I have 4 more simcards from my brothers (they all had iphone 4 too)
    I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
    Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
    I called apple support, and they exchange the iphone for another one.
    I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
    Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
    I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
    When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
    Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
    btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
    Serial numbers of the 3 iphones:
    79039C0U* (this one worked great with Unefon, only problem was yellow screen)
    85042GR4*
    81042FJB*
    What do you suggest me? any info would be really aprecciated
    FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
    Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
    I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
    btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

    According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

  • Weird problem With my Audigy 4

    Hi all, I have a weird problem with my audigy 4. When I install the Nvidia IDE and Sata driver for my motherboard, I get sound problem in BF2, It glitches, I don't here my gun, well it's all ****ed up. Does anyone know why?Thanks in advance.

    I have had every iphone model ever made. I have never had a problem like this before. It appears that there are small spots all over the screen. Not to be confused with the "yellow spots" other iphone 4 user have been reporting due to the glue not drying before they reached the customer. This is a different type of spot. I would compare it to a petrie dish that scientist test for things in.
    The only thing I can think of is something is happening with the coating over the glass (oleophobic coating maybe braking down?). It only happened on the front screen and not the back glass. You can get the spots to go away when you use a micro fiber cloth to remove the natural oil from your face against the phone. The minute you start using the phone again, they appear. They are kinda annoying and make your phone screen look dirty and have a weird glare in it when your in the sun.
    I made an appointment tomorrow to go to the apple store to see what they can tell me. Hope fully its nothing major. The worst thing that could happen is the phone gets replaces by another. Ill keep everyone update.

  • Strange Problem with my E7 - Nokia

    Hi Readers,
    I have encountered a stupid problem with my E7. Last night while talking on the phone (on Low Battery), the phone suddenly turned OFF, so I thought this was due to Low Battery rather No Battery. Later last night, I came home and plugged on the charger and ever since I have been getting this Light (when the phone is on charge) which is Blinking. The whole night it was on charge, only to realize, this blinking light stops after a certain while, this morning I tried to restart my phone and it bloody doesn't turn on... so:
    1) Is there a problem with the phone/battery
    2) is the Blinking light at the charging point common
    Note: The screen is been blank till now (its been what 12 hrs approx)...
    So any suggestions please...

    Hi ksarat16,
    Sorry to hear about the issue but welcome to the forum! The light next to USB-port is meant to blink while the phone is being charged. Try the following actions to make your phone working again.
    Press the power button until the phone vibrates 3 times (approx. 10 sec). Then turn it on.
    If this does not work, then try to connect it to PC with USB-cable and open Nokia Suite. Try to power on again.
    In case you can turn it on, you can perform these actions in order prevent the phone to freeze again:
    First of all make a back up with Nokia Suite. Type in *#7780# = soft reset, no data lost.
    You can also reinstall the phone software. The process is the same as when updating with Nokia Suite, but at the end select "Reinstall".
    Type in *#7370# = hard reset, phone memory will be wiped. Restore back up.
    If the first 2 actions fail, please take the phone to your local Nokia Care point and let them inspect it.
    Hope you get your phone working again!
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • Problems with IP Phones registration to CUCME on SG200-50P

    Problems with IP Phones registration to CUCME on SG200-50P
    System setup:
    - Router Cisco 2811 with IOS 12.4(24)T5 Advanced IP Services, CUCME 7.1, DHCP Server
       with HWIC-4ESW
    - Switches:
       - old - SLM224P
       - new - SG200-50P (SLM2048PT), OS v1.3.2.02
    - IP Phones 7911 and 7931, OS v8.4.2
    One VLAN (for desktops and IP Phones) and one IP subnet, no voice VLAN.
    Network diagram:
    C2811---HWIC-4ESW---SWITCH---IPPhones
    Problem description:
    1. In the old setup with SLM224P everything works fine.
       Connected phones almost immediately (1-2 sec. after power up) get ip address, configuration and registers to CUCME.
    2. When switch is changed to new SG200-50G:
       - ip phones get their ip address and tftp configuration very slowly - about 10-20 seconds
       - ip phones cant register to CUCME at all. On the router with SCCP debugging turned on there is no sing of registration attempt
       - after reconnecting the old SLM224P situation backs to normal
    Things that have been checked or tried without success:
    - ports speed and duplex auto, correct detection - although not tested with manual settings
    - CDP/LLDP on/off
    - smartport mode auto and most static settings, also with disabled smartport
    - power cycle / reset
    - spanning tree and port security settings
    - solutions from that post - https://supportforums.cisco.com/thread/2232161
    None of the above methods worked.
    The only action that allowed ip phones to register was changing smartport role to static IPPhone + Desktop.
    After that when phone was disconnected and then reconnected the problem exists again - no registration (IP Phone status DECEASED in CUCME). Same with power cycle/reset.
    Please advice.
    Thanks in advance.

    1 - You have created the voice vlan?
    Nope, flat network, one ip subnet (10 hosts and 10 phones)
    2 - Have you set a phone on an untagged access port for the voice vlan to see if it works?
    Yep, phones are connected to untagged access ports of the one and only vlan
    3 - Have you tried to set the auto voice vlan on the switch so it dynamically assigns the role for ip phone + desktop?
    Not sure about auto voice vlan setting, although there was no triggers to AVV - no static voice vlan, no CDP/VSDP advertisements of voice vlan.
    We've tested static and auto smartport roles (independently of auto voice vlan feature) with successful auto-detection.
    The switch was pretty much in default out-of-the-box config (beside management parameters).
    4 - When rebooting the switch, you did ensure to save the start up to running config?
    Yes, running to startup
    5 - Have you manually set spanning tree PORT FAST for the phone ports?
    No, we haven't tested that. But portfast should be set automatically for the desktop and ip phone smartport roles.

  • My iphone 4 was crushed on the road.  Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact mean

    My iphone 4 was crushed on the road.  Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store.  What does that mean please?

    Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.

  • Hi every time I go to write a tx on my iPhone it asks for my apple I'd sign in like when I buy an app or something and you have to enter your password is there a way to stop it doing this or is there some kind of problem with the phone

    Hi every time I go to write a tx my phone asked for my sign in details like I have just bought something like an app of song ect I just press cancel and it goes away but still pretty annoying is there a way to stop this or is there a problem with the phone  ? Thanks

    If the login box keeps popping up either your acct is disabled or you are mistyping your pw.  
    Go here and try out your pw and reset if necessary:
    http://appleid.apple.com/
    Click on Manage ID and go from there.

  • Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • What,s the reason to stop iphone 5?? Is there any problem with that phone?? Because still 4s is in market but iphone 5 is stopped.... What,s wrong with apple??

    Why apple stoped iphone 5? What's the reason?? Is there any problem with that phone... Because iphone 4s is still in market.. But they stopped iphone 5.. What's wrong with iphone 5????

    It was replaced by the iPhone 5C, which is essentially the same phone except for the case, better LTE converage and a larger battery.

  • Weird problem with JApplet

    I'm having a weird problem with JApplet. So first I create an Applet with this code
    public class japp extends JApplet {
         public void init() {
              Container content=getContentPane();
              JButton jb=new JButton("Hello");
              content.add(jb);
    }and with this in the .html file;
    <html>
    <body>
    <APPLET CODE="japp.class" WIDTH="650" HEIGHT="500"></APPLET>
    </body>
    </html>
    And opened it in Firefox, it worked as expected. However, when I change the code in any way, i.e.
    public class japp extends JApplet {
         public void init() {
              Container content=getContentPane();
              JButton jb=new JButton("Goodbye");
              content.add(jb);
    }and compile it, it still shows the old button that displays "Hello". I've tried deleting the .class file from before and recompiling, that doesn't work. What am I doing wrong?
    Thanks.

    Reloading the page usually doesn't work. You will need to open the Java Console and clear classloader cache (x). You can also use appletviewer for testing purposes.

  • Weird problems with CSS being applied to JSF pages

    I have this really weird problem with my CSS rules being applied to my JSF pages. My CSS rules don't get applied unless one of the following two things happen:
    - A page is reloaded (by redirecting to itself, or if there were validation errors)
    - The previous page in the history had the same relative reference to the same CSS file.
    If a page is newly loaded, and the previous page did not have that same CSS reference, the CSS styles will not show up. Also, if the above is true, and the page is reloaded by JSF, the CSS styles show up.
    Now, my problem could be solved if I put all JSP files in the same level, but the display of the first page would still be without the CSS style applied.
    Is this known behaviour? And if it is, does it have anything to do do with the way JSF handles URLs (always one level back)? Help and input is kindly appreciated!

    Dude,
    I tried the same
    <link rel="stylesheet" href="<h:outputText value="#{facesContext.externalContext.requestContextPath}"/pages/css/default.css" />
    and I got the following Jasper exception.... pointers plz ??
    =============================================================
    2005-08-24 14:18:55,937 [http-8080-Processor25] ERROR org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[mydemo].[FacesServlet] - Servlet.service() for servlet FacesServlet threw exception
    org.apache.jasper.JasperException: /myproj/eventCrit.jsp(8,78) Unterminated <h:outputText tag
         at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
         at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:405)
         at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:130)
         at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1049)
         at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
         at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
         at org.apache.jasper.compiler.Parser.parseBody(Parser.java:1793)
         at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1060)
         at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
         at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
         at org.apache.jasper.compiler.Parser.parse(Parser.java:126)
         at org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
         at org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
         at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:146)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
         at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
    =========================================================

Maybe you are looking for

  • ABAP dispatcher, JControl and ICM

    As we know, If an ABAP instance is started with an additional Java instance, the ABAP dispatcher uses a signal to run a start command on the Startup and Control Framework, then JControl is started, and  JLaunch is started by JControl. In ABAP + Java

  • How can i protect J2EE applications from piracy?

    I m looking for solution to protect Web application from piracy. I want my application run on web server for which it is built, & it musn't run on any other web server. how can i protect my web application from piracy?. Our .Net applications we prote

  • Text prints as bold when it's not bold :(

    Hi, I'm using Windows 7 and InDesign CS6. When I print PDF documents from files that have been created in InDesign some lines of the text print out bold when they are not bold and they also look a little fuzzy. I am creating the PDf using the "[High

  • Can I see iPhone cam in iPad screen, can I sencronize Real time . Tanks

    Can I see iPhone cam in iPad screen, can I sencronize Real time . Tanks İ am medikal doktor and I use a medical equipment that can use iPhone cam and I need to Show this video Real time to my parents by iPad screen I hope you can understand

  • Converting PNP related statement to simple ABAP

    Hello, i had a report which uses PNP logical database of HR module. the code contains two specific lines to be used with it. Get PERNR. and rp_provide_from_last p0000 space pn-begda pn-endda. Now i want to do the same functionality using simple ABAP