Weird problems with recovery partition

Hi. I just got a new X1 Carbon a few days ago. When trying to install Ubuntu, I messed up the bootmgr. At that point I still had the option F11 for recovery on startup, but choosing it did not give any results and after a restart, the option was gone. When researching the problem, I found this thread:
http://forums.lenovo.com/t5/ThinkVantage-Technolog​ies/Need-help-with-recovery-partition-create-recov​...
Since my recovery partition Q was untouched, the steps described in the thread allowed me to restore partitions S and C. So far so good, but now the problems start.
First, the letters of the partitions get messed up after every reboot. I assign Windows7_OS the letter C, SYSTEM_DRV gets S, and Lenovo_Recovery gets Q. Diskpart then lists the drives with correct letters. But after a reboot, they're back to D,C,E, respectively.
Then, when I boot the Windows recovery disk from a usb stick, it correctly recognizes that Windows is installed on drive D. It suggests that there are startup problems, which I tell it to fix. After the next reboot, it does not warn me about startup problems. When I then go to command prompt and enter
bootrec.exe /fixmbr
bootrec.exe /fixboot
then the Windows recovery disk commits suicide. It seems to attempt to fix its own bootmgr. At the moment, both usb stick and hard disk run with grub (Windows recovery on a multiboot installed by YUMI). After I run the commands above, the hard disk still runs with grub, but the usb stick now has bootmgr and fails to boot. I have tried this several times, each time recreating the Windows recovery disk with YUMI, and every time the same result.
F11 option is of course still gone. At this point I'm out of my wits. Any suggestions are welcome.
Solved!
Go to Solution.

In the end I formatted and made a clean install. F11 Option is gone. Recovery partition is still untouched, but I don't think it will be used again. Followed this advice to install a fresh Windows 7 using a usb stick:
http://www.sevenforums.com/tutorials/219487-clean-​reinstall-factory-oem-windows-7-a.html#post1839164
Since I did not have access to Windows with administrator rights, I had to use Ubuntu to create the bootable Windows stick:
http://cloud101.eu/blog/2012/03/24/create-a-window​s-7-live-disk-from-ubuntu-linux/
The WiFi driver was not included in Windows, so I had to download that in another system, and install manually. From there I could then go online in Windows to download the remaining drivers from Lenovo (after the clean install there's a long list of unrecognized devices).
Since the laptop comes with 4 primary partitions preinstalled I had to merge the SYSTEM_DRV and the Windows7_OS partition in order to create an additional partition for Ubuntu. Then I installed Ubuntu and took control of the startup behavior using EasyBCD.

Similar Messages

  • Problem with Recovery Partition(After i got a Virus)

    Hi all,
     I am using HP Envy 15 notebook with windows 7 home premium x64-bit installed.I didnt create the recovery disks since i got this notebook and what happened is that i got a virus from the internet but i almost repaired all system faults caused by it but the main problem for me is that it change all main drive folders name into Virus1232 for example (d:\recovery changed into d:\virus1234) and i spent hours over the internet to get the right folder and file names and i got them all but only one file not sure of.My problem is when i enter the Recovery Manager it doesn't detect any my recovery partition(but the virus isnt responsible for any file deletion it just caused some system changes) and just to speak i also corrected the folder and file names in c: drive since they are needed too.
    These are the filenames i got in D: drive : bootmgr - BT_HP.flg - CSP.DAT - DeployRp.log -  HPSF_Rep.txt - language.ini ; and the filename let is the one im not sure of: "HP_WSD.dat" (it is a zero-byte file).
    The recoverymgrdump.txt works right untit "CSBRMgr::GetRPTOOLPartIndex leaving!"
    then it tells me :
    "Win32 System Info Code = 3, Info Message = The system cannot find the path specified."
    and it also say :
    "CSBRMgr::HpcdFlgIsExistInUP <UP>:\WINDOWS\hpdrcu.prc does not exist."
    I dont know if that is normal but also the deployrp.log gives me this error:
    "Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab"
    ofcourse there are more errors in both files but i guess those are the most important.
    So my question is: could the file attributes in d: drive be responsible for this error(i changed all attrbutes to be system hidden and read only)
    OR
    If anyone have a solution please tell me what to do.
    Thanks.
    This question was solved.
    View Solution.

    You are best to order a set of Recovery discs from HP, doi a full recovery using those.
    You can order recovery media here
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    Or call HP on the phone to order a set.
    USA
    http://welcome.hp.com/country/us/en/contact_us.html
    Everywhere else
    http://welcome.hp.com/country/us/en/wwcontact_us.html

  • Dv 6-6170 ee problem with recovery partition

    my recovery partition isnt working when i try to start it by F11 a message of failure of allocation of the partition appear ,i had made an extra partiton using a tool then when the recovery problem appeared i removed this partition and when i tried to set the partition as an active one i cant press it because it is deactivated.
    in the manager window it shows that i have 4 partitions C,System,Recovery,Hp tools is this right and how can i reactivate my recovery to work properly,plz advice me.
    This question was solved.
    View Solution.

    After applying the changes- restart the laptop at least once. Then shutdown and restart after 1 minute--tap F11 to check if Recovery is working.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Problem with recovery partition

    I have HP DV6 6051ea laptop,my problem is when i try to recover my OS(win7 Home Premium ) to factory condition through recovery partition,it says use created recovery disk.I have created them but I realy ned to use recovery partiton to recover OS not Disk.Please help me to solve the problem.
    This question was solved.
    View Solution.

    Hi,
    This information for you to use created media is possible due to several reasons such as, recovery partition is currupt, missing, or some files are not readable.
    in such cases, you need to use created media as 1st step and if you fail to perform recovery using created media. you need to order one from hp. link below
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • Installing a SSD Samsung 830 Drive on my 520 - Problem with Recovery partition

    Hello,
    I am installing a 128GB Samsung 830 SSD on the W520, and i've put the original 50GB HDD on a HDD bay replacing the DVD/CD. bay.
    I did a system recovery on the HDD, to put it on its original states. Then I used Acronis True Image HD to clone the HDD to the SSD. I have the main partition on the SSD along with the Lenovo_recovery partition. I then install the SSD on the HD slot, and start the PC. No problem till there. It starts, and the machine works fine.
    I then do a system recovery from the HDD, and the recovery process goes to the end, but when the system restarts, I have a crash and it asks me to introduce the windows recovery disk. But I cannot starts anything anymore.
    If I reinstall the 500GB HDD, it start no problem.
    Any idea? Thank you for your help! 

    Really? Then how did you get the Samsung SSD in there to begin with. Look, you got two choices here: 1. Return the SSD for a refund, or 2. Find a Windoes PC & update the firmware.
    Why you'd purchase an SSD, to use in a Mac, whose firmware can only be updated using a Windows computer, makes no sense to me.

  • Problem with recovery partition in harddrive

    Hello,e
    i am using a hp pavillion g6 note book with windows 8 in it. 
    i am not able to use the recovry partition to restore my notebook. whenever i try the recovery using hp recovery manager or f11 boot option it show the required media is missing. please help.  
    This question was solved.
    View Solution.

    Hi,
    There are a couple of options.

  • Apple Banned me, because of a very weird problem with my "Factory Unlocked"

    Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
    First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
    Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
    Here's my problem. Apple has exchanged my iphone 3 times.
    I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
    On October 20th, i recieved my second iphone, and then a bigger problem started .
    Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
    1.- Telcel
    2.- Movistar
    3.- Unefon
    OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
    And every time i tried to activate it, only got this message onscreen:
    http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
    I though something was wrong with my brand new factory unlocked iphone 4.
    I have 4 more simcards from my brothers (they all had iphone 4 too)
    I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
    Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
    I called apple support, and they exchange the iphone for another one.
    I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
    Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
    I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
    When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
    Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
    btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
    Serial numbers of the 3 iphones:
    79039C0U* (this one worked great with Unefon, only problem was yellow screen)
    85042GR4*
    81042FJB*
    What do you suggest me? any info would be really aprecciated
    FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
    Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
    I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
    btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

    According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

  • Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • Weird problem with JApplet

    I'm having a weird problem with JApplet. So first I create an Applet with this code
    public class japp extends JApplet {
         public void init() {
              Container content=getContentPane();
              JButton jb=new JButton("Hello");
              content.add(jb);
    }and with this in the .html file;
    <html>
    <body>
    <APPLET CODE="japp.class" WIDTH="650" HEIGHT="500"></APPLET>
    </body>
    </html>
    And opened it in Firefox, it worked as expected. However, when I change the code in any way, i.e.
    public class japp extends JApplet {
         public void init() {
              Container content=getContentPane();
              JButton jb=new JButton("Goodbye");
              content.add(jb);
    }and compile it, it still shows the old button that displays "Hello". I've tried deleting the .class file from before and recompiling, that doesn't work. What am I doing wrong?
    Thanks.

    Reloading the page usually doesn't work. You will need to open the Java Console and clear classloader cache (x). You can also use appletviewer for testing purposes.

  • I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

    I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

    Assuming you entered the correct WiFi password for your network, see these articles:
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • Weird problems with CSS being applied to JSF pages

    I have this really weird problem with my CSS rules being applied to my JSF pages. My CSS rules don't get applied unless one of the following two things happen:
    - A page is reloaded (by redirecting to itself, or if there were validation errors)
    - The previous page in the history had the same relative reference to the same CSS file.
    If a page is newly loaded, and the previous page did not have that same CSS reference, the CSS styles will not show up. Also, if the above is true, and the page is reloaded by JSF, the CSS styles show up.
    Now, my problem could be solved if I put all JSP files in the same level, but the display of the first page would still be without the CSS style applied.
    Is this known behaviour? And if it is, does it have anything to do do with the way JSF handles URLs (always one level back)? Help and input is kindly appreciated!

    Dude,
    I tried the same
    <link rel="stylesheet" href="<h:outputText value="#{facesContext.externalContext.requestContextPath}"/pages/css/default.css" />
    and I got the following Jasper exception.... pointers plz ??
    =============================================================
    2005-08-24 14:18:55,937 [http-8080-Processor25] ERROR org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[mydemo].[FacesServlet] - Servlet.service() for servlet FacesServlet threw exception
    org.apache.jasper.JasperException: /myproj/eventCrit.jsp(8,78) Unterminated <h:outputText tag
         at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
         at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:405)
         at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:130)
         at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1049)
         at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
         at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
         at org.apache.jasper.compiler.Parser.parseBody(Parser.java:1793)
         at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1060)
         at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
         at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
         at org.apache.jasper.compiler.Parser.parse(Parser.java:126)
         at org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
         at org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
         at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:146)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
         at org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
         at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
    =========================================================

  • Weird problems with OSX Tiger

    I'm with a weird problem with my OS Tiger. I have a G4/400 AGP Graphics with a Fastmac 1.5GHz processor upgrade, 1 GB RAM, 128MB video card, USB 2.0 card and a Sonnet serial ATA card. I have two HDs: one of 80GB and another one with 250GB (serial ATA) connected to the serial ATA card.
    I have installed OS X Tiger in this serial ATA HD. Some weird things are happening since then. Sometimes when I shutdown my Mac, the delay is too long, all the icons disappear and the spinning wheel cursor remains in the screen for a long time until the Mac shuts down.
    Sometimes when I try to open some applications, the same thing happens, the delay is long. And it happens too when I try to quit some applications. The sintom doesn't follow a rule - sometimes happen and other times it don't happen. And when I hit optioncommandesc to force quit, the application appears in the list as 'not responding', and even when I force quit it doesn't quit at all.
    I already have checked the disk permissions, I have runned MacJanitor, but the problem is still there.
    Any idea?

    Hello! Long delays are often caused by corrupt disk directories. I'd first boot from the install Tiger disc and run the repair disk routine and then repair permissions AFTER rebooting from the hard drive. Other than that I'd get Diskwarrior to keep the directories in good shape. Tom

  • Weird problems with XFCE

    So I got a weird problem with XFCE (I think) sometimes everything just stops working, my PPTP vpn, can't start new applications, no shortcut commands on my keyboard works etc. For example when this happened and I tried to open a text document with gedit i got "Process /usr/bin/Thunar exited with status 1" and when I'm connected to my vpn I can't access the internet, not browsing and I can't ping other websites. And in my terminal instead of "icamaxi@localhost" it becomes "[email protected]" 
    This problem happens randomly and it works if you restart the computer.
    my xinitrc looks like:
    #!/bin/sh
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    exec startxfce4
    I also get this error message sometimes if that helps you
    "(process:1055): Gtk-WARNING **: Locale not supported by C library.
    Using the fallback 'C' locale.
    No protocol specified"
    Xorg log
    Another thing that is not related to this problem but that is annoying is that i can't lock my screen, when I try nothing happens, I've tried the shortcut command and also with the actions button applet but none of this work.
    Last edited by Icamaxi (2012-11-24 17:13:22)

    Icamaxi wrote:
    So I got a weird problem with XFCE (I think) sometimes everything just stops working, my PPTP vpn, can't start new applications, no shortcut commands on my keyboard works etc. For example when this happened and I tried to open a text document with gedit i got "Process /usr/bin/Thunar exited with status 1" and when I'm connected to my vpn I can't access the internet, not browsing and I can't ping other websites. And in my terminal instead of "icamaxi@localhost" it becomes "[email protected]" 
    This problem happens randomly and it works if you restart the computer.
    my xinitrc looks like:
    #!/bin/sh
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    exec startxfce4
    I also get this error message sometimes if that helps you
    "(process:1055): Gtk-WARNING **: Locale not supported by C library.
    Using the fallback 'C' locale.
    No protocol specified"
    Xorg log
    Another thing that is not related to this problem but that is annoying is that i can't lock my screen, when I try nothing happens, I've tried the shortcut command and also with the actions button applet but none of this work.
    I'm not certain about your first issue, but does it ever occur when you aren't connected ot your VPN?
    For the screen locking problem, what are you using to lock your screen? I use xflock4, and have a keyboard command set up in the keyboard commands to lock my screen.

  • Weird problems with battery

    Hi guys,
    I having some weird problems with my new battery. I changed the old battery (that died) for a brand new one. The first problem was: the mac didn't recognized the new battery in a macbook pro 13 early 2011. So, I putted the battery in a another macbook pro 13 mid 2010 and worked. So, I passed the battery again to macbook early 2011 and worked fine. I thought this very weird, but it is ok. The big problem came after: about two or three days of regular use, the mac just didn't turn on (I'm sure the battery charge was full). Even the battery charge button didn't work, like as the battery didn't stay there. However, if I shake the mac, something happen and the battery start to work normally. few minutes after (around 15 minutes), the mac shut down immediately, like as someone disconnect the battery from MB. If I shake the mac, the same thing happen again, few minutes after the mac turn off. The other strange fact is: if I open the mac, disconnect and reconnect the cable of battery (that connect with MB), the mac start work properly and 2 or 3 days after the problem go back.
    Anyone has a clue?
    I'm not confident about a bad contact problem of the cable with the MB, because the problem is repeated with some regularity of days (ever 2 or 3 days after connect the cable to MB).
    I guess could be a problem in the logic board of the battery... What do you think could be? If the problem is because the logic board, is there a solution?
    Thanks

    Call Apple and get them to take a look at it, you've done all the 'customer troubleshooting' you can ...

  • Weird problem with role assignment in Portal

    Hi,
    In our newly installed Portal for eRecruitment Production System we encounter a weird problem with assigning roles to users.
    When I open User Administration and search for roles, it displays the Portal roles perfectly.
    However, when I search for a user in User Administration and click on it when found, I am unable to find any roles to assign! So I am unable to find any roles, when I want to modify the assigned roles for a particular user, while the roles do exist and can be found on its own. How is this possible? Am I missing something here?
    We have installed SPS 15 and use ABAP as user store. We have used reverse proxy and web dispatchers in this case.
    Thanks in advance and best regards,
    Jan Laros

    Found some entries in the default trace from this morning:
    #1.#005056A15F78006A000004F400006D310004520B11DB3CE8#1216107404407#com.sap.security.core.jmx.impl.CompanyPrincipalFactory#sap.com/tc~wd~dispwda#com.sap.security.core.jmx.impl.CompanyPrincipalFactory.static Set evaluateDatasourcesToSearchFor(String[] requestDatasourceIds,     String privateType, Locale locale)#JALAROS#58762##nun.efteling.nl_POP_9750151#JALAROS#581700b0524011ddc029005056a15f78#SAPEngine_Application_Thread[impl:3]_36##0#0#Error##Java###Error while connecting to remote producer {0}
    [EXCEPTION]
    {1}#2#PRODUCER_0KTHQ3YTJV#com.sap.security.core.persistence.remote.CommunicationException: Cannot display remote roles of selected producer. The producer has removed your consumer instance from their portal.
            at com.sap.portal.ivs.global.roles.RemoteProducerAccessImpl.sendToRemote(RemoteProducerAccessImpl.java:497)
            at com.sap.portal.ivs.global.roles.RemoteProducerAccessImpl.checkConnectivity(RemoteProducerAccessImpl.java:220)
            at com.sap.security.core.jmx.impl.CompanyPrincipalFactory.evaluateDatasourcesToSearchFor(CompanyPrincipalFactory.java:656)
            at com.sap.security.core.jmx.impl.CompanyPrincipalFactory.simplePrincipalSearchByDatasources(CompanyPrincipalFactory.java:3172)
            at com.sap.security.core.jmx.impl.JmxSearchHelper.getSimpleEntitySearchResult(JmxSearchHelper.java:74)
            at com.sap.security.core.jmx.impl.JmxSearchHelper.calculateSimpleEntityTable(JmxSearchHelper.java:1182)
            at com.sap.security.core.jmx.impl.JmxServer.calculateSimpleEntityTableByDatasources(JmxServer.java:1061)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
            at java.lang.reflect.Method.invoke(Method.java:391)
            at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
            at javax.management.StandardMBean.invoke(StandardMBean.java:286)
            at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
            at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
            at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
            at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
            at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
            at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
            at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
            at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
            at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:776)
            at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
            at com.sap.security.core.jmx._gen.IJmxServer$Impl.calculateSimpleEntityTableByDatasources(IJmxServer.java:717)
            at com.sap.security.core.wd.jmxmodel.JmxModelCompInterface.calculateSimpleEntityTable(JmxModelCompInterface.java:396)
            at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface.calculateSimpleEntityTable(InternalJmxModelCompInterface.java:443)
            at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface$External.calculateSimpleEntityTable(InternalJmxModelCompInterface.java:746)
            at com.sap.security.core.wd.umeuifactory.UmeUiFactoryCompInterface.getSimpleEntityTable(UmeUiFactoryCompInterface.java:471)
            at com.sap.security.core.wd.umeuifactory.wdp.InternalUmeUiFactoryCompInterface.getSimpleEntityTable(InternalUmeUiFactoryCompInterface.java:517)
            at com.sap.security.core.wd.umeuifactory.wdp.InternalUmeUiFactoryCompInterface$External.getSimpleEntityTable(InternalUmeUiFactoryCompInterface.java:894)
            at com.sap.security.core.wd.relaterole.RelateRoleComp.searchNewRoles(RelateRoleComp.java:259)
            at com.sap.security.core.wd.relaterole.wdp.InternalRelateRoleComp.searchNewRoles(InternalRelateRoleComp.java:282)
            at com.sap.security.core.wd.relaterole.AssignParentRolesView.onActionSearchNewRoles(AssignParentRolesView.java:215)
            at com.sap.security.core.wd.relaterole.wdp.InternalAssignParentRolesView.wdInvokeEventHandler(InternalAssignParentRolesView.java:261)
            at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
            at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
            at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
            at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
            at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
            at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
            at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
            at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
            at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
            at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
            at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
            at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1257)
            at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
            at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
            at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
            at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
            at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
            at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
            at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
            at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
            at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
            at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
            at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(AccessController.java:180)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    #1.#005056A15F780060000004FD00006D310004520C6A35F87C#1216113181849#com.sap.engine.services.security.roles.SecurityRoleReference##com.sap.engine.services.security.roles.SecurityRoleReference#J2EE_GUEST#0####399cb180524e11dd9849005056a15f78#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Security/Audit/J2EE#Java###{0}: Authorization check for caller assignment to J2EE security role [{1} : {2}] referencing J2EE security role [{3} : {4}].#5#ACCESS.ERROR#service.naming#jndi_all_operations#SAP-J2EE-Engine#administrators#
    #1.#005056A15F78005C00000C0500006D310004520C6A394185#1216113181992#com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl##com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl#J2EE_GUEST#0####39aa6d20524e11ddaee2005056a15f78#SAPEngine_Application_Thread[impl:3]_29##0#0#Error#1#/System/Server#Java###Runtime exception occurred while processing external JMX request [ JMX request (java) v1.0 len: 150 |  src: 2 target-node: 9750150 req: getAttribute params-number: 2 params-bytes: 0 |  ]
    [EXCEPTION]
    {0}#1#com.sap.engine.services.jmx.exception.JmxSecurityException: Caller J2EE_GUEST not authorized, only role administrators is allowed to access JMX
            at com.sap.engine.services.jmx.EngineAuthorization.checkMBeanPermission(EngineAuthorization.java:88)
            at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:77)
            at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:98)
            at com.sap.engine.services.jmx.MessageClientSecurityWrapper.checkPermissions(MessageClientSecurityWrapper.java:76)
            at com.sap.engine.services.jmx.MessageClientSecurityWrapper.invokeMbs(MessageClientSecurityWrapper.java:38)
            at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:196)
            at com.sap.engine.services.jmx.ClusterInterceptor.getAttribute(ClusterInterceptor.java:512)
            at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:84)
            at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
            at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
            at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
            at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
            at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(AccessController.java:180)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Maybe you are looking for