Weird Publishing with already made site!

ok guys i need alot of help! now ive been looking at like all
the forums for the past couple of days, yet there not helping me...
ok so i am working on my company's website. i am revamping it, so
there is already one, but it wasnt created with dreamweaver. so i
now started from scratch and made it in dreamweaver. now im done,
somewat. i have some issues regarding flash, basically i have a
flash menu, and wen i try linking the "dreamweaver sites" to the
menu its not working, so im guessing that by publishing these sites
to real www. it might help the process of linking? so anyway im
trying to publish the site, so i connected to my server and all
that, now i dont know how to make the "sites" i created the ones u
see wen u get to the website. i rly dont know wat to do.. im on a
timeline, so please any help would be appreciated!!

For me your post is all over the board, downright frenetic
and I really
don't know what your question is. Perhaps you could step
back, rethink your
situation and re-post taking a bit more time to describe your
actual
question.
I do have a sense that part of your problem might be solved
if you would
access DW's Help and read up on "Defining a site"
Walt
"magzin" <[email protected]> wrote in
message
news:g8c0kc$2t3$[email protected]..
> ok guys i need alot of help! now ive been looking at
like all the forums
> for
> the past couple of days, yet there not helping me... ok
so i am working on
> my
> company's website. i am revamping it, so there is
already one, but it
> wasnt
> created with dreamweaver. so i now started from scratch
and made it in
> dreamweaver. now im done, somewat. i have some issues
regarding flash,
> basically i have a flash menu, and wen i try linking the
"dreamweaver
> sites" to
> the menu its not working, so im guessing that by
publishing these sites to
> real
> www. it might help the process of linking? so anyway im
trying to publish
> the
> site, so i connected to my server and all that, now i
dont know how to
> make the
> "sites" i created the ones u see wen u get to the
website. i rly dont know
> wat
> to do.. im on a timeline, so please any help would be
appreciated!!
>

Similar Messages

  • Weird Problem with Already Burnt DVD

    I burnt a DVD and everything routes to the final chapter marker. Everything in the scene select goes to the final scene and also when I hit play movie, it starts at the final scene.

    Hi
    This sounds strange:
    • Do You mean - each Chapter starts at the last chapter and cont. to The End - or -
    • Each Chapter starts where it should then cont. to The End
    First one is wrong - I would:
    • delete iDVD movie pref file (or even start a new user-account - it does it better)
    • Start a new iDVD project
    • And have a re-try
    Second one: This is the way iDVD works - I would:
    • Add each Chapter as an individual movie segment
    (Yes this will take up double the space)
    (This is due to the lack of a "PLAY-ALL" function in iDVD)
    Yours Bengt W

  • Firefox Adblockplus destroy completely my entire iweb made site.

    Hi there.
    My site is built with iweb and not published on mobileme.
    Firefox is my default browser, since one week Adblock plus destroy completely
    my site. It doesn't block only the videos, it erase font etc.
    If I disable adblock everything goes back fine.
    Why it does it only with my site? Someone noticed the same problem with iweb made sites?
    It is in the nature of the codes used by iweb that are similar to advertising
    banners, pop-up ecc?
    There is a way to avoid it? I'm afraid my site could be completely unreadable by all firefox adblock plus users!!
    Help!!
    T.

    never call a directory or a folder "ad", sooner or later it will be crushed down by adblock!

  • Am i allowed to publish an app made with the AIR 3.5 SDK in the app-store yet?

    Hello,
    Am i allowed to publish an app made with the AIR 3.5 SDK in the app-store/android market? Im quite confused about this since AIR 3.5 has already been released yet the SDK remains in Beta.
    I know that in the past it was not allowed to publish an App with an Beta-version of an SDK.
    Can anyone clear this up for me?
    Kind regards,

    AIR 3.5 beta removed the watermark, and I actually released an app to the app store with the beta version. I'm not sure if Adobe intends to continue with this for future releases or if it was just for iPhone 5 stuff that needed to be released quickly. AIR 3.5 is currently out of beta though and was actually updated today, so feel free to use it to submit apps to whichever app store you would like.

  • Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

    Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

    I am publishing directly to an FTP server (option 1).  Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
    I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums.  I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
    Maybe it is a publishing issue, or it could be a photo/file issue.  However, these albums aren't very large -- the largest containing 135 photos --
    Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
    I'm pulling my hair out here trying to diagnose the problem...

  • Weird issue with Site Template in O365

    Hi,
    I ran into a weird issue while working with Site Template in O365 last night.
    I created a sub-site in a Site Collection with some Site Columns, CT and Lists. Then I saved it as a Site Template so that it can be used for different sites. Then I created 3 different sub-sites using the template. All went good.
    After some time when I looked at the sites, something really irritating happened. I saw the first two sites were missing all the site columns and CT. And the latest third site had 3 copies of each Site Column and CT.  Though for the first two sites,
    all the CT, Site Columns were available at List level, but it wad just the reference. The Actual CT was not seen the site settings.
    This is the first time I saw this kind of issue. Not sure what is the reason for this.
    Any idea around this ?
    Thanks,
    Nutan
    Nutan Sharma

    Hi,
    According to your description, my understanding is that the error occurred when you created a site from the template with no files in the document library.
    I tested the same scenario per your post, and I can create a site from the template with no files in the document library with no errors.
    To solve this issue, I recommend to verify the things below:
    Did you save the site as a template with Include Content checked? If yes, I recommend to test if it works when saving the site as a template with Include Content unchecked.
    Test the same scenario with a new site to narrow the issue scope.
    I also recommend to check the event log and ULS log to see if anything unexpected occurred.
    To check event log, click the Start button and type “Event Viewer” in the Search box.
    For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
    You can check the ULS log by the methods here:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How do I publish to my Azure site after updating VS 2013 with update 4?

    I created a new website in using the basic web forms type and got and ran the basic project in my browser.
    However, when I went to create the publish connection …  no publish menu item exists
    I created an empty project and added the basic items needed to bring up my index.aspx page
    Still no way to setup the publish the project
    I have screen shots that very the statements but they will not load here
    I updated to VS 2013 Update 4 to get the gui interface to my SQL Azure DB  ...   I need the gui SQL Azure interface but now need to know how to publish my updated site.
    Pres

    Thanks Mekh, I think webmatrix ended up being the interfering product BUT I had too many older versions of various VS on the machine. I spent some time uninstalling old software etc. but once I got my system cleaned up VS Express 2013 Upd 4 works fine. I
    have a GUI to SQL Azure and I can publish to my new site. Thanks again!!!  
    I'm very happy with the entire Azure platform. I can focus on trying to improve my process and the Azure team does all the heavy lifting for me!  :-)
    Pres
    Pres

  • HT2534 How can I download a free app with an existing Apple ID without to give my credit card infos?! The ID ist already made...

    How can I download a free app with an existing Apple ID without to give my credit card infos?! The ID ist already made...

    Sorry, but you can't. The process only works when creating a new Apple ID. With an existing ID you'll have to provide a payment method at least temporarily.
    Regards.

  • I got my IPhone stolen yesturday, I already went to the police department, but my Iphone seems to be in a weird location with the Find my IPhone, is a way to find it over the serial number?

    I got my IPhone stolen yesturday, I already went to the police department, but my Iphone seems to be in a weird location with the Find my IPhone, is a way to find it over the serial number?

    no apples find my iphone use it signal

  • HT1414 Hi, I have iPhone 4G. it should be unlocked, becouse i don't have contract with AT&T anymore, but it's still not working. Now i'm staying in Ukraine, Europe. I already made backup.

    Hi, I have iPhone 4G, it should be unlocked, becouse i don't have contract with AT&T anymore, but it's still not working. Now i'm staying in Ukraine, Europe. I already made backup.
    <Personal Information Edited by Host>

    If unlocked by ATT, then restore iPhone Firmware, this will complete the unlock. iTunes will give you large message box indicating the iPhone is Unlocked. If not unlocked after Restore of Firmware, then you must contact ATT since they are the only ones who can authorize a Real Factory unlock of this iPhone.

  • Using a domain name with the mac site

    If I use a domain name on Site #2, does that mean that Site #1 will automatically have the same domain name?
    I already have a Site #1 up and running. Now I purchased a new domain name that I would like to use only for site# 2. I was worried about going in with any edits to Site #1 just in case it would go to the new domain name instead of where it is right now.
    Any light on that subject?

    If you have 2 websites in the same domain folder the uppermost site or the site that you most recently published will be linked to your domain name. If you don't want it to be then you need to re-publish with the site that you want to be linked to your domain name is uppermost. You can move the sites around by dropping and dragging.
    The easiest thing to do is to separate the sites so that you have site 1 in 1 folder and site 2 in another. Following this, the site that you publish first will be linked to your domain name. If it is not this site that you want then just publish the other site.
    How do you have the first site set up? Is it using CNAME or web forwarding? Have you entered your personal domain name into your .Mac account?
    If you have one .Mac account and two websites and two personal domain names, then you can use CNAME for one site and web forwarding with or without masking for the other site. You can only enter one domain name into one .Mac account.

  • Import-spweb with -force errors out with "already exists" message

    So, I did an export-spweb of an existing site (migrated from SP2007 and still retains the SP2007 look and feel) and created the files containing it. I then went to a new farm, with a new site collection on a new content database. Nothing else exists
    there.
    I run
    Import-spweb –identity
    http://mytestsite/sites/ITSM -Path d:\temp\itsm –verbose –force –nofilecompression
    and after a few minutes, we get:
    [5/27/2014 1:47:15 PM] [List] [Links] Progress: Importing
    [5/27/2014 1:47:15 PM] [List] [Links]   ExtendedVerbose: Creating
    [5/27/2014 1:47:15 PM] [List] [Links]   Error: A list, survey, discussion board, or document library with the specified title already exists in this Web site.  Please choose another title.
    [5/27/2014 1:47:15 PM] [List] [Links]   Debug:    at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
       at Microsoft.SharePoint.Library.SPRequest.CreateListOnImport(String bstrUrl, Guid& pguidListId, String bstrTitle, String bstrDescription, Int32 lTemplateID, String bstrFeatureId, Guid guidRootFolderId, Int64 llFlags, Int32 iVersion, Int32 iAuthor,
    String bstrFields, String bstrContentTypes, String bstrImageUrl, String bstrEventSinkAssembly, String bstrEventSinkClass, String bstrEventSinkData, Guid guidDocTemplateId, String bstrViews, String bstrForms, Boolean bCompressedSchema, DateTime dtTimeCreated)
       at Microsoft.SharePoint.Deployment.ListSerializer.CreateList(SPWeb parentWeb, Dictionary`2 listMetaData, Boolean usingPublicSchema)
       at Microsoft.SharePoint.Deployment.ListSerializer.SetObjectData(Object obj, SerializationInfo info, StreamingContext context, ISurrogateSelector selector)
       at Microsoft.SharePoint.Deployment.XmlFormatter.CallSetObjectData(Object obj, SerializationInfo objectData, ISerializationSurrogate surrogate, ISurrogateSelector selector)
    I don't understand why, with the -force, it just didn't overwrite whatever it thinks was there. That's how I interpret the meaning for the flag.
    It suggests that I chose another title - I am trying to create an exact duplicate of the original site, so giving a different title defeats my objective.
    Is there something that I am missing?
    We ended up without any site at all to go to... at the very least it could have created all that it could from the file.
    Thank you!

    Weird - how would a site have two lists with the same name and path?
    How would I get around this? I mean, the export had no problem creating the data... I expected the import to rebuild the same thing that was exported.
    I take a look at the lists and libraries on the original site and there is 1 list that appears with the name "Links". There are other lists that have the word Links as part of their name - but
    not a second one with the simple name of "Links".

  • How to publish one of multiple sites?

    Hi ~ I am trying to publish a new site, but do not want to update the changes I've made in my existing site.  Is there a way to only publish the new site?
    I'd appreciate any guidance.  THANKS

    What version of iWeb are you using and where are you hosting the site? 
    If you have iWeb 3 just select the one site you want to update and useg the File ➙ Publish Site Changes to publish/update only that site.
    If you're running iWeb 2 then you would have to separate the web sites into their own individual domain files in order to publish just one site at a time.
    To split the sites into their own domain file duplicate the current domain so you have one for each site.  Rename the domain files for the sites.  Then open the Site1 domain file and delete all of the sites from it except for Site 1. Do the Same for each of the other sites. When you want to edit and publish site 3 double click on the Site 3 domain file to open it with iWeb.
    OT

  • How to create a navigation bar with custom made buttons?

    I'm used to work with a similar program as Muse. In there we can create a single button and link them together into a navigation bar. I have tried all sorts of tutorials but none of them is discussing this possibility.
    To summorize. The idea is to create a button in photoshop and to use this as a theme to build a navigation bar. Possible or not and how? Thanks for assistance. Rgds Rufin

    Hi Brad,
    Thanks for your reply.
    No, not really. I used to work with XARA up till now. And being an Adobe Cloud user I think it a bit silly using two different systems. In XARA I can create a custom button and turn them into a navbar. For your information I include a few links to sites I created with Xara and I would like to know if I can create the same type of navbars with Abobe Muse. I already found out that all the other functions are available and some work a lot better in Muse, but I’m stuck on the navbar issue. I know I can create a button in Adobe PS and use it in Muse. But I didn’t manage to figure out how to create a navbar in Muse on basis of a button created in PS.
    www.restaurant-cedric.be or www.discoamigo.com or www.radioparadijs.be
    Grtz,
    Rufin
    LOGO-RUFIN'S-REISBUREAU-outlook
    Koningslaan 36 – b31
    8300 Knokke – Heist
    Tel: 050621052
    Fax: 050621072
    e-mail:  <mailto:[email protected]> [email protected]
    <http://www.rufins.be/> http://www.rufins.be
    <http://www.travelcoop.be/> travelcoop_logo_2013[1]  <http://ferventreisagent.be/rufins-reisbureau> klein logo
    Van: Brad Lawryk
    Verzonden: zondag 12 oktober 2014 19:40
    Aan: RUFIN DUWEL
    Onderwerp:  How to create a navigation bar with custom made buttons?
    How to create a navigation bar with custom made buttons?
    created by Brad Lawryk <https://forums.adobe.com/people/Brad+Lawryk>  in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/6817739#6817739>

  • Using 3.6.23. When i upgrade, trouble with Lloyds tsb site.

    Using 3.6.23. When i upgrade, trouble with Lloyds tsb site. One of my accounts has code like>br all over it. Also when i want to access a specific account it logs me out. Cannot upgrade as cannot use internet banking. Any ideas? edit

    After I loaded 5.5, then removed it and loaded 3.6 again, I had no problems.
    Then my hard drive died and I installed a new one.
    Then I downloaded ONLY 3.6 since I already knew I didn't like the changes that 5.5 had made and the kinks hadn't been ironed out. That was in July.
    The hesitation problem started recently, toward the end of Sept. I have wireless cable modem that runs 36-54 mbps but in Sept/Oct I was visiting family and distance from their router sometimes meant running at 12 or 24. I thought the hesitation/lagging was due to that. BUT
    Since coming home in mid Oct., although nothing about my home connection has changed, I am finding this lagging/not responding/hesitation problem continues AS IF the connection were slow but router/modem/internet connection are all intact.
    This is what made me wonder if anyone else is experiencing this/reporting it to Firefox. Apparently not.

Maybe you are looking for