Weird "\r" in property value

Hi,
I am populating an object in my code and for some reason when I debug it I see this "\r" at the end of the value.  It is driving me nuts and I can't figure out why only this property has it that way.  The other properties populate fine but I am getting this "\r".   Any idea why?  Here is what I am seeing when I debug within Flex Builder
username: "jblow\r"
email: [email protected]
phone: "800-555-1212"
I assume \r is some type of new line character or something to that effect but I'm not sure why it's getting appended to my values.
-Westside

From a database query.  I am thinking the data is stored in the database like that so the solution may be simple as ensuring the the initial data is trimmed before loading it....
-Westside

Similar Messages

  • "Property value is not valid" when PropertyGridView tries to convert a string to a custom object type.

    Hi,
    I have a problem with an PropertyGrid enum property that uses a type converter.
    In general it works, but when I double clicking or using the scoll wheel,  an error message appears:
    "Property value is not valid"
    Details: "Object of type 'System.String' cannot be converted to type 'myCompany.myProject.CC_myCustomProperty."
    I noticed that the CommitValue method (in PropertyGridView.cs) tries to convert a string value to a CC_myCustomProperty object.
    Here is the code that causes the error (see line 33):
    (Using the .net symbols from the PropertyGridView.cs file)
    1
            internal bool CommitValue(GridEntry ipeCur, object value) {   
    2
    3
                Debug.WriteLineIf(CompModSwitches.DebugGridView.TraceVerbose,  "PropertyGridView:CommitValue(" + (value==null ? "null" :value.ToString()) + ")");   
    4
    5
                int propCount = ipeCur.ChildCount;  
    6
                bool capture = Edit.HookMouseDown;  
    7
                object originalValue = null;   
    8
    9
                try {   
    10
                    originalValue = ipeCur.PropertyValue;   
    11
    12
                catch {   
    13
                    // if the getter is failing, we still want to let  
    14
                    // the set happen.  
    15
    16
    17
                try {  
    18
                    try {   
    19
                        SetFlag(FlagInPropertySet, true);   
    20
    21
                        //if this propentry is enumerable, then once a value is selected from the editor,   
    22
                        //we'll want to close the drop down (like true/false).  Otherwise, if we're  
    23
                        //working with Anchor for ex., then we should be able to select different values  
    24
                        //from the editor, without having it close every time.  
    25
                        if (ipeCur != null &&   
    26
                            ipeCur.Enumerable) {  
    27
                               CloseDropDown();   
    28
    29
    30
                        try {   
    31
                            Edit.DisableMouseHook = true;  
    32
    /*** This Step fails because the commit method is trying to convert a string to myCustom objet ***/ 
    33
                            ipeCur.PropertyValue = value;   
    34
    35
                        finally {   
    36
                            Edit.DisableMouseHook = false;  
    37
                            Edit.HookMouseDown = capture;   
    38
    39
    40
                    catch (Exception ex) {   
    41
                        SetCommitError(ERROR_THROWN);  
    42
                        ShowInvalidMessage(ipeCur.PropertyLabel, value, ex);  
    43
                        return false;  
    44
    I'm stuck.
    I was wondering is there a way to work around this? Maybe extend the string converter class to accept this?
    Thanks in advance,
    Eric

     
    Hi,
    Thank you for your post!  I would suggest posting your question in one of the MS Forums,
     MSDN Forums » Windows Forms » Windows Forms General
     located here:http://forums.microsoft.com/MSDN/ShowForum.aspx?ForumID=8&SiteID=1.
    Have a great day!

  • How to Get property values from Shared Object in client's load event - Very urgent

    I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
    Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
    Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
    1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
    2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
    Any kind of help would be greatly appreciated.
    Thank You.

    I am using shared object to share data between two users. First user connect to shared object and set some value in shared object. Please consider that second user has not connected with the shared object yet.
    Now when second user connects to the server and try to get that property set by first user, he could get shared object but could not get properties of Shared object set by first user. I observed few times that Second user can get these properties within "Sync" event between two users. But I would like to get these values for Second user in any stage (i.e. in load event etc.). Whenever Second user tries to get the property of Shared object, the object will reset the actual property value and then return reset value.
    Anyone faced such issue while using shared object between two users. If so, I would appreciate if you could let me know your suggestions for following questions:
    1) Is there any way to get all the properties of shared object before sync event called, as I want to get it immediately when second user connect to the application and perform next task based on the values stored in shared object.
    2) Is it possible for second user to check whether any property has been set by first user? So that second user can use the property instead of reset it.
    Any kind of help would be greatly appreciated.
    Thank You.

  • Multiple TYPEELIM property values for an account

    I am trying to set automatic adjustment business rules and need to assign multiple multiple TYPEELIM property values for an account. Any idea how to achieve this?
    Here is my example. Letu2019s assume there are 2 eliminations I need to do.
    Elimination 1: Account A, B, C going to Account Y
    Elimination 2: Account A, B, D going to Account Z
    For elimination 1, to group source accounts (A,B,C), I want to assign u201CELIM1u201D for TYPEELIM property to all source account (A,B,C).
    For elimination 2, to group source accounts (A,B,D), I want to assign u201CELIM2u201D for TYPEELIM property to all source account (A,B,D).
    As you see, accounts A and B are repeated in both cases. I am not sure how I can assign both ELIM1 and ELIM2 property for these two accounts.
    Options I have thought of:
    1.     Include automatic adjustment line by line:  But since I have many accounts, this will be very lengthy and not good from maintenance point of view.
    2.     Include one ELIM1 in TYPEELIM and ELIM2 in Dimlist: But my real case is more than just two elims as mentioned above. What if there are 4 elim and includes same account?
    Any idea on this?
    Thanks in advance.

    Hi,
    http://help.sap.com/saphelp_bpc75/helpdata/en/5A/69200C88AA40C9B18844A25259F147/frameset.htm
    Administration->Business Calculation->Business Rule Management->Automatic Adjustment->Automatic Adjustment Detail
    This is for 7.5, but majority of contents are not changed from 7.0.
    Regards,
    YH Seo

  • How to get Document Set property values in a SharePoint library in to a CSV file using Powershell

    Hi,
    How to get Document Set property values in a SharePoint library into a CSV file using Powershell?
    Any help would be greatly appreciated.
    Thank you.
    AA.

    Hi,
    According to your description, my understanding is that you want to you want to get document set property value in a SharePoint library and then export into a CSV file using PowerShell.
    I suggest you can get the document sets properties like the PowerShell Command below:
    [system.reflection.assembly]::loadwithpartialname("microsoft.sharepoint")
    $siteurl="http://sp2013sps/sites/test"
    $listname="Documents"
    $mysite=new-object microsoft.sharepoint.spsite($siteurl)
    $myweb=$mysite.openweb()
    $list=$myweb.lists[$listname]
    foreach($item in $list.items)
    if($item.contenttype.name -eq "Document Set")
    if($item.folder.itemcount -eq 0)
    write-host $item.title
    Then you can use Export-Csv PowerShell Command to export to a CSV file.
    More information:
    Powershell for document sets
    How to export data to CSV in PowerShell?
    Using the Export-Csv Cmdlet
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to search a property value in a TDMS and return the group name.

    Hi.
    Please help
    I want to search a TDMS file by property value and then return the group names or channels.
    I am using labview 8.2 with the connectivity toolkits.

    The error # is -2558
    I try to close the TDMS file before it reach the search part but still give me the error code -2558
    Attachments:
    search and read property value per group.jpg ‏77 KB

  • Assigning the property value to signeddata

    Hi all,
    I want to use a property value like a signeddata. For example a have a property QUANTITY in MATERIAL dimension.
    *WHEN MATERIAL.QUANTITY
    *IS > 0
    *REC(EXPRESSION=[MATERIAL].[QUANTITY], P_ACCT=120)
    *ELSE
    *REC(EXPRESSION=1, P_ACCT=120)
    *ENDWHEN
    Any idea?
    Burak

    Hi,
    Could you try the below: Needs to be tested. Just a suggestion.
    *WHEN MATERIAL.QUANTITY
    *IS > 0
    *REC(EXPRESSION=%VALUE%, P_ACCT=120)
    *ELSE
    *REC(EXPRESSION=1, P_ACCT=120)
    *ENDWHEN
    Thanks

  • "Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

    I created a site column at the root of my site and I have publishing turned on.  I selected the Hyperlink with formatting and constraints for publishing.
    I went to my subsite and added the column.  The request was to have "Open in new tab" for their hyperlinks.  I was able to get the column to be added and yesterday we added items without a problem. 
    The problem arose when, today, a user told me that he could not edit the hyperlink.  He has modify / delete permissions on this list.
    He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
    Link in New Window checkbox, the Display Text, and Tooltip:
    "Message from Webpage  There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
    We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
    The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
    and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem.  I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
    Summary from this link below: Comment out, below, in AssetPickers.js
    //callbackThis.VerifyAnchorElement(HtmlElement, Config);
    perform IISReset
    This is referenced in the item below:
    http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
    TThThis is possibly the same information that I saw, possibly from the above link as reference.
    http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
    Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
    I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
    Thank you!
    Matt

    We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
    I blog about this issue and having the office reference.
    Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
    So if you apply the April CU then you will be fine.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • How to retrieve a property value from an iview in the back-end?

    Hi,
    I am looking for a back-end function module or any other way to retrieve the property value of an iview in the portal.
    Is this possible?
    thanks,
    Bert Caryn

    Hi,
    Look at the following threads,
    For programmatically getting the iview properties,
    Programmatically getting iView Properties
    Also,
    Get Properties of IView Programmatically
    Permanent change of iView property programmatically
    Hope these threads help u.
    Regards
    Srinivasan T

  • "Highlight Property Value" dialogue box won't go away! Help! CS2

    Have a page that I'm working on, now every 5 seconds or so a box pops up "Highlight Property Value" asking me to enter name and value of CSS property. No amount of canceling or entering data gets rid of it.
    Never have seen this box in all my years of GoLive.
    Tried quitting and reopening GL, but still there.
    CS2 on Leopard.

    Installed as another user-set to admin, but this means I cannot work on any of my existing sites (since they are assigned to the other user- got error message). really hard to troubleshoot this way.
    Created a new page and did as many quick tasks I I could think of, but did not get the box.
    Logged out and then back in as original user to work on another site and was able to do a few tasks before the box popped up again. Once the box pops up, it's regularly every 5 seconds in all modes source, preview or layout
    I had had Leopard installed for a few weeks before this problem started.
    Could I have missed purging the offending Adobe file in the last reinstall I did on the main user?
    Is there an Apple pref that might have something to do with it?
    Prefs were easy, but it seems as though CS3 and CS2 Suites have some common named files in the Library. I am installing from the Suite disks. If I completely remove all the files that the CS2 deinstall instructions say to delete, can I be assured that I won't be deleting a critical CS3 file of the same name?
    Would love to disable that highlight function any way possible -I've never used it.

  • How to get DocSet property values in a SharePoint library into a CSV file using Powershell

    Hi,
    How to get DocSet property values in a SharePoint library into a CSV file using Powershell?
    Any help would be greatly appreciated.
    Thank you.
    AA.

    Hi AOK,
    Would you please post your current script and the issue for more effcient support.
    In addition, to manage document set in sharepoint please refer to this script to start:
    ### Load SharePoint SnapIn
    2.if ((Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue) -eq $null)
    3.{
    4. Add-PSSnapin Microsoft.SharePoint.PowerShell
    5.}
    6.### Load SharePoint Object Model
    7.[System.Reflection.Assembly]::LoadWithPartialName(“Microsoft.SharePoint”)
    8.
    9.### Get web and list
    10.$web = Get-SPWeb http://myweb
    11.$list = $web.Lists["List with Document Sets"]
    12.
    13.### Get Document Set Content Type from list
    14.$cType = $list.ContentTypes["Document Set Content Type Name"]
    15.
    16.### Create Document Set Properties Hashtable
    17.[Hashtable]$docsetProperties = @{"DocumentSetDescription"="A Document Set"}
    18.$docsetProperties = @{"CustomColumn1"="Value 1"}
    19.$docsetProperties = @{"CustomColum2"="Value2"}
    20. ### Add all your Columns for your Document Set
    21.
    22.### Create new Document Set
    23.$newDocumentSet = [Microsoft.Office.DocumentManagement.DocumentSets.DocumentSet]::Create($list.RootFolder,"Document Set Title",$cType.Id,$docsetProperties)
    24.$web.Dispose()
    http://www.letssharepoint.com/2011/06/document-sets-und-powershell.html
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Exception setting property value with CGLIB ( in hibernate)

    My hbm.xml file is:
    <hibernate-mapping>
    <class name="com.dst.fourx.model.codeModel.CodeGroupDisplay" table="CODE_GROUP_DISPAY1">
    <composite-id name="codeGroupDisplayKey" class="com.dst.fourx.model.codeModel.CodeGroupDisplayKey">
    <key-property name="nlsLanguage" type="java.lang.String" column="LANG_CD" />
    <key-many-to-one name="codeGroupCode" class="com.dst.fourx.model.codeModel.CodesGroup" column="CD_GRP_CD" />
    </composite-id>
    <property name="createDate" column="CREATE_DT" type="java.util.Date" not-null="true"/>
    <property name="createUserCode" column="CREATE_USER_CD" type="java.lang.String" not-null="true"/>
    <property name="updateDate" column="LAST_MOD_DT" type="java.util.Date"/>
    <property name="updateUserCode" column="LAST_MOD_USER_CD" type="java.lang.String"/>
    <property name="displayText" column="DISPLAY_TXT" type="java.lang.String" not-null="true"/>
    </class>
    <query name="findAllEditableCodeGroups">
    <![CDATA[from CodeGroupDisplay]]>
         </query>
    </hibernate-mapping>
    I m getting the following error while running the above query:
    org.hibernate.PropertyAccessException: exception setting property value with CGLIB (set hibernate.cglib.use_reflection_optimizer=false for more info) setter of com.dst.fourx.model.codeModel.CodeGroupDisplayKey.setCodeGroupCode
         at org.hibernate.tuple.PojoComponentTuplizer.setPropertyValues(PojoComponentTuplizer.java:63)
         at org.hibernate.type.ComponentType.setPropertyValues(ComponentType.java:262)
         at org.hibernate.type.ComponentType.resolve(ComponentType.java:447)
         at org.hibernate.type.ComponentType.nullSafeGet(ComponentType.java:182)
         at org.hibernate.loader.Loader.getKeyFromResultSet(Loader.java:759)
         at org.hibernate.loader.Loader.getRowFromResultSet(Loader.java:292)
         at org.hibernate.loader.Loader.doQuery(Loader.java:412)
         at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:218)
         at org.hibernate.loader.Loader.doList(Loader.java:1593)
         at org.hibernate.loader.Loader.list(Loader.java:1577)
         at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:395)
         at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:271)
         at org.hibernate.impl.SessionImpl.list(SessionImpl.java:844)
         at org.hibernate.impl.QueryImpl.list(QueryImpl.java:74)
         at com.dst.fourx.core.impl.ao.dao.actions.HibernateNamedQueryAction.execute(HibernateNamedQueryAction.java:79)
         at com.dst.fourx.core.impl.ao.dao.BaseDAOHibernate.execute(BaseDAOHibernate.java:129)
         at com.dst.fourx.core.impl.ao.dao.AddEditCodeDAO.getAllFundingTypes(AddEditCodeDAO.java:47)
         at com.dst.fourx.core.impl.ao.dao.AddEditDAOTest.testGetCreditBankAccts(AddEditDAOTest.java:29)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at junit.framework.TestCase.runTest(TestCase.java:154)
         at junit.framework.TestCase.runBare(TestCase.java:127)
         at junit.framework.TestResult$1.protect(TestResult.java:106)
         at junit.framework.TestResult.runProtected(TestResult.java:124)
         at junit.framework.TestResult.run(TestResult.java:109)
         at junit.framework.TestCase.run(TestCase.java:118)
         at junit.framework.TestSuite.runTest(TestSuite.java:208)
         at junit.framework.TestSuite.run(TestSuite.java:203)
         at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:478)
         at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:344)
         at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
    Caused by: net.sf.cglib.beans.BulkBeanException: com.dst.fourx.model.codeModel.CodesGroup$$EnhancerByCGLIB$$fd9c7e4e
         at com.dst.fourx.model.codeModel.CodeGroupDisplayKey$$BulkBeanByCGLIB$$ae2c0401_2.setPropertyValues(<generated>)
         at org.hibernate.tuple.PojoComponentTuplizer.setPropertyValues(PojoComponentTuplizer.java:59)
         ... 32 more
    Caused by: java.lang.ClassCastException: com.dst.fourx.model.codeModel.CodesGroup$$EnhancerByCGLIB$$fd9c7e4e
         ... 34 more

    check the setter method for the property LANG_CD in com.dst.fourx.model.codeModel.CodeGroupDisplay.
    it must be like -
    setNlsLanguage(CodesGroup xyz) { ... }
    The paremeters must be objects, not the type of the database column. We can specify the actual field in CodesGroup which acts as the foreign key in CodeGroupDisplay in the "property-ref" attribute of <many-to-one> element in the mapping file for CodeGroupDisplay.
    This worked for me. Hope it works for you too.

  • How to get the 'text' property value of a button in coding?

    Hi Experts,
    I'm using 10 buttons all are having common action('click'). when i click a button the 'text' value of the button should pass to a function.So the action is same but the passed value will be the 'text' value of the corresponding button.  I don't know how to get the 'text' property of a button in coding. Kindly help me to solve this problem.
    Thanks and Regards
    Basheer

    Hi,
    My event is like this.
    public void onActionclick(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
         String s =  ?  ; // should get the 'text' property of clicked button
         fillInput(s);     // function to be called
    The called function is,
    public void fillInput( java.lang.String id )
        String str=wdContext.currentContextElement().getNum();
        str = str + id;
        wdContext.currentContextElement().setNum(str);
    How can i get the 'text' property value of the corresponding button. Click action should be common to all buttons.
    Thanks and Regards,
    Basheer

  • Default property values

    Is there any way of setting system wide default property values in Windows XP? For example, I want to set the extensions directories to point to a common jar directory for all java programs I run on my computer. Or I want to set the JDBC driver properties for all programs. Any easy way of doing this?

    Use some wrapper script?

  • Wht s max sizelimit of value in(property-value pair)of content typ in CMS

    For a content type we create many properties in administration console. eg.Name, FIle, Desc
    wht s max sizelimit of value in(property-value pair)of content typ in CMS, where i hav defined the property as string.

    In WLP 10.0, the maximum String property length was increased.
    I believe the max String property length depends on the DB type. It always at least 4000 characters. For Oracle, it is 4254 characters.
    More info at http://edocs.bea.com/wlp/docs102/db/data_dictionary.html#wp1090682
    -Steve

Maybe you are looking for