WEIRD RAM Voltage Problem. Really happy for some help =)
Hi I have a K8N Neo2 Platinum motherboard with BIOS version 1.4.
I have a wonderfull set of OCZ PC-3200 Platinum rev.2 RAM that preferably should have atleast 2.75 V. They do work with less, but stability can suffer in some cases.
My problem is that if I choose 2.75, 2.8 or 2.85 V in BIOS I still end up with 2.7 in Windows. Only by increasing the voltage in windows with, for example, Corecenter can I reach a voltage over 2.7. Why do I have this problem? Is there any simple way to fix it?
I mean, I think that if the MB was broken in any way (hardware wise) so shouldn't it be possible to change the voltage through windows (the voltages are correct BTW and the MB show no other signs of error except this).
Is this a know bug in any way for the MB or the 1.4 BIOS version? And as said before, do anyone know how to fix it?
Lots of thanks to anyone that can help (this problem is really making me confused).
Edit: one more question while Im at it. As many others I have freezing problems with my 6800 ultra. Is there any trick/BIOS that solves this (I know disable AGP fastwrites... helps and disable NV/Ati speed up... but except that).
The bug is most likely corecenter. It seems to report things wrong for most people. Try using speedfan or similar program to verify voltage before you get too concerned. Just dont use mbm 5, people have reported problems there as well. You can get speedfan at www.guru3d.com.
Similar Messages
-
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
Evening folks...looking for some help about my iphone microphone
Evening folks....looking for some help.....I have a 3G Iphone and when I phone people they cannot hear me properly...sound like I am underwater....
Any ideas or suggestions gratelfully accepted..I thought that is what the big deal was that people did not know until they opened the box and started using the iPhone 5, that it not only worked with one carrier but several carriers. I did not say it will work with any carrier at one time. I was trying to find out the reason for this and why people were so surprised that the iPhone 5 had this function and the reason for it. As stated in my post, is it there so that after your contract is up and you want to go to another carrier you do not have to purchase a new iPhone, you cna purchase a SIM card that works with your new carrier.
The Otterbox Defender has a tendency to let too much dirt, dust, etc. in the cracks on the case. At least this has been my expereince. I was thinking something more along some of the really durable cases at BallisticCaseCo.com
As far as the iPhone 5 having issues, I have heard that there were more than usual with the first couple of manufactured batches that were shipped. For example the Map App by Apple, the scratches on the backside of hundreds of iPhones, etc. I am hoping these will get to be less and less, but with the recent riot at the one plant in China where the iPhone 5 is assembled is supposed to increase the waiting time. -
Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance! -
Looking for some help in creating an ItemFilter for a Targeter
Looking for some help in creating an ItemFilter for a Targeter
Need a examples for creating itemfilter and TargeterFirstHi David,
We can integrate Syncfusion with LightSwitch application, if you want to customize column when create a report using syncfusion reportviewer, since I didn't try this third party
extension before, I think you could consider getting help from
syncfusion forum, more syncfusion experts can help you on this issue.
Thanks for your understanding.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.
ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport -
I'm getting 100s of debug.log. files on my macbook OS 10.7.5. I've never seen them before. Should I be worried? They look like this: debug.log.100100_100119.sent. Is it an encryption problem? thanks for any help!
I'm getting 100s of debug.log. files on my macbook OS 10.7.5. I've never seen them before. Should I be worried? They look like this: debug.log.100100_100119.sent. Is it an encryption problem? thanks for any help!
-
HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphod will not download and my ipad any help would be great.
A lot of people are experiencing it, which suggests that Apple is having issues. If that is the case all people can do is wait it out.
-
K7T Turbo2 low RAM voltage problem?
Hello
I just purchased a K7T Turbo2 6330v5 mainboard.
I have a standard singlesided 256Mb/PC133 RAM module.
I installed FuzzyLogic 4 and it shows a RAM voltage of 2.5V,while I thought all PC133 chips needed 3.3V.........
I have a fresh Win98SE install and the computer keeps freezing up,usually happens either when it enters Windows or after about 15 minutes and I have a couple of programs running.
The BIOS shows 3.46V on the 3.3V supply.
All voltages are within range in the BIOS.
any help appreciated
?(Problem seems to be solved,and it wasn't the RAM voltage.
The onboard audio and/or drivers for that was causing the problem.
8o -
okay, I finally got up enough gumption to do the wire trick to unlock my 2400+. That being done, I pushed the fsb up to 180 (With kingston 2700 valueram) with moderate stability.
Jedi knight 2 is a really oc sensitive game, so I cant play it at 180. My question is, why the heck can I not adjust the ram voltage. Every time I try to set it to 2.7, it defaults back to 2.6. No matter what I do.
Frustrating
WiseQuote
Originally posted by Wiseblud
okay, I finally got up enough gumption to do the wire trick to unlock my 2400+. That being done, I pushed the fsb up to 180 (With kingston 2700 valueram) with moderate stability.
Jedi knight 2 is a really oc sensitive game, so I cant play it at 180. My question is, why the heck can I not adjust the ram voltage. Every time I try to set it to 2.7, it defaults back to 2.6. No matter what I do.
Frustrating
Wise
Welcome to your bios. Hopefully MSI will change this - it's a drag. But for now, there's nothing you can do - I think. -
Hello everyone, hoping for some help with my new Apple Cinema Display 20"
Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: teleloveI've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove -
Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabitboom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update? -
New to the E90 - grateful for some help ...
Greetings All,
Just got my E90 a few days ago. Just a few questions to start off with:
1. Can anybody recommend a decent free file manager application, i.e. one which actually allows me to browse the entire filesystem? The built-in Nokia file manager only lets you see the \data\ folder in the phone, so for example you cannot see anything you've downloaded from the web!!
(1b. Or is there a way to change the destination of downloaded files in the web browser?)
2. Why is the GPS so poor? I live in London, UK, and there must be plenty of satellites available (everybody around me uses GPS with no problem), yet my E90 frequently finds only one satellite, or none at all, and can't triangulate my position.
3. (This is tricky.) Does anybody else use s2putty? (s2putty.sourceforge.net) It works fine for password access, but it won't accept my private key (says "Cannot use - not a private key"). I've tried creating a brand new key pair in puttygen and still it doesn't work. I think the file format is somehow munged when it's copied over to the E90. Does anyone have any idea about this?
4. Is it just me or it the user manual really totally rubbish? Is there a good user guide somewhere which tells you how to switch between apps easily, sort out your own menus, get rid of lots of the pre-installed gubbins etc. etc.?
5. That'll do for a start, unless anyone knows of a good hex editor, DOS emulator or Master Of Magic port ...
Thanks in advance for any help,
CCY-Browser:
http://www.drjukka.com/YBrowser.html
Many guides that might not have come in the sales package here:
http://europe.nokia.com/appmanager/UnitedStatesEnglishEUROPE_NOKIA_COM_3/Get_support;JSESSIONID_NCOM... -
A Potential Convert Looking for Some Help with Boot Camp
I posted this in the Macbook Pro forums, and somebody directed me here. Hopefully you can help me with my questions.
Hello,
I have been a PC user ever since I can remember. I have loved the operating system and have had a Dell Laptop for 4 years now without any problems at all. I have no qualms with the Windows Operating Systems. But, it is time for me to get a new laptop, as I will soon be heading off to college. I was thinking about getting another PC, as they are significantly cheaper than the lower-end MBP that I would get, but I was also thinking about trying out a Mac. I plan on using this laptop for most of my undergraduate education though, so I don't want to buy something and find out it isn't what I want or I can't use it. So, if you would help me, I would like to ask some questions about the lower-end Macbook Pro, and I may just end up getting one.
First things first, I am going to be going into engineering, likely mechanical or systems, at either WPI, Northeastern, or Tufts. Ah the experience of choosing colleged. I know Tufts uses AutoCAD, WPI uses SolidWorks, but I am not sure which Northeastern uses. Either way, I most certainly will be using a CAD program. I know that most CAD programs do not work on Macs, so I will likely be using Boot Camp. I have though seen on these boards that the AutoCAD licensing does not work with Boot Camp, or that some users have faced major problems with it. If this is so, then it is highly likely that I will be unable to get a Mac as that program is going to be an absolute necessity. Even if this is just a small percentage of the population, I do not want to find mine being of major issue. For those of you who have gotten it to work, how difficult was the installation, and have you had any issues with AutoCAD or the like? With this in mind, would you even suggest that I get a MBP?
Another Boot Camp question. I have read many posts on these boards discussing different partitioning options, yet I still am unsure what they all mean. I expect to use the Windows side for more than just AutoCAD. I likely will install some games on it for when I am bored, and Microsoft Office, as I do not wish to spend the extra money buying Office for Mac and I need to have the versatility of Excel that I have heard is not found in the Mac version. What is the difference between these two partitioning types, which would you recommend, and how much storage should I partition if I get a 200GB hard drive?
Yet another Boot Camp question, sorry for so many of these. My friend who has a Mac lauds it for its security, nobody makes viruses for Macs. As I will most definitively be using Windows in Boot Camp, would this compromise this security? I know it will be Windows, but I still imagine that it would be encoded somewhat differently then normal, but I could be wrong. Also, if it is possible for the Windows portion to get a virus, could that affect the Mac portion?
Also, I don't use an iPod. I suppose I always thought they were overpriced for what they do. Instead I use an Iriver Clix 2, and I love it. The only thing is, I use Windows Media Player to sync it with my library. I know many have qualms with WMP, but I personally favor it more than iTunes, but that is just me. I do not believe that you can download it for a Mac. If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Finally, is the battery life any different when using Windows than when using Leopard? I will likely be using the Windows portion in the class room.
Sorry for the long-winded post, but I am certainly hoping that I can get some solid answers to make an educated decision before getting my next laptop. I would like to thank you very much for any help that you are able to give me. I do hope you can help me quickly. Thank you.
Message was edited by: PyrojoeI can't answer all your questions, especially not anything having to do with CAD.
I still imagine that [Windows] would be encoded somewhat differently then normal,
No. Windows is Windows. You will need a good Windows antivirus, firewall and antispyware program. It is unlikely that a Windows virus will infect the Mac partition because, ordinarily, Windows doesn't know how to do anything with the HFS+ formatted Mac partition. However, the existence of products like MacDrive means that it is possible to teach Windows how to write to the Mac partition, so I see no reason why a virus could not be programmed to.
If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Yes. Probably/yes.
Finally, is the battery life any different when using Windows than when using Leopard?
Yes. Windows does not have the battery management that Leopard has. The battery runs down much quicker in Windows.
You didn't ask, but depending on what kind of engineering you want to study, you may be interested in, or even need to, use some flavour of Unix/Linux. On the one hand, you could always create a partition on a PC--or wipe Windows--and install Linux on the PC. That could even be a good learning experience. On the other hand, Mac OS is Unix, but preinstalled. So with a Mac, you would already have a platform for writing shell scripts, you would have Perl and Python built-in, you would have an IDE (XCode Tools) for C/C++/Objective C/Java as well as gcc and make tools already on the disks which come with the computer, and so on.
Message was edited by: Mr.Lobotomy -
Looking for some help/ideas on a deployment.
Hi,
I'm currently about to attempt to migrate from my FreeBSD based Postfix/Dovecot/Squirrelmail/Spamassassin/Procmail based conglomeration of doom to Solaris 10/JES.
I've toyed around with JES a bit (I downloaded the two cd release, 2005Q4 I believe..) and had a lot of issues - the documentation is most certainly not geared to new users, and often following the steps exactly will result in inconsistant results, requiring quite a lot of Googling to resolve.
That being said, I'd like to propose the setup I am considering, and get input on it, to see if I'm doing something stupid and if some people who have experience with JES have suggestions/input.
I'd like to begin with one Sun server running Solaris 10U1 (or U2 depending on when I finally get this all figured out.) I do have a Solaris 10 machine to play with now, in order to experiment.
I would like to run JES inside of zones (or a zone, whichever is best). I will be starting with one machine, but I would like the option to scale as time goes on.
The primary purpose of JES will be to handle mail (via IMAP/Webmail) hence my posting in this forum. Secondary will be other Solaris 10 servers authenticating against the DS. Third will be handling the webserving (this might tie into webmail?).
Eventually, I would like to scale all of these operations out to multiple servers (ie maybe 2, 3, 10, 40 mail servers, 2, 3, 4, 40 DSs, webservers, etc...) For now it will only be on the one machine.
My idea was to run each of the services in it's own zone, but while attempting to do that using the JES 2cd set I have, it's requiring me to install things over and over even though I have them installed in other zones. I'm getting the impression splitting the JES components up across zones doesn't work so well. Maybe I'm doing something wrong. Please advise. This is making me worry, because I don't know what I'm going to do when I'm trying to install all of these things on seperate machines.
All of that being said, what is my best deployment? I know I'll need messenging server, directory server. What else? What order should I be installing them in? Is it possible to install each in it's own zone without making a huge headache? How about each on it's own server? How about each on multiple servers authenticating against replicated DSs? I'm pretty sure it's all doable, but I'm def. messing up somewhere, as anytime I try to install a component on the JES2005Q4 cd, it's forcing me to install a bunch of other things. Why should I have DS installed on every zone that has some piece of JES in it, when there is a zone with DS that I plan to have everything authenticate against? Things like this - I'd like to know what I'm doing wrong.
I've seen some mention about installing JES from individual downloads, but I didn't see that covered in the docs. The step by step does a huge install of everything under the sun, and really doesn't clarify what a lot of the details you are entering are. Not only that, but following it (to the letter) step by step doesn't result in a working solution. I even used the same hostname. :P
I'd really appreciate any input/help/suggestions, as my current solution rather stinks to administrate.
Thanks,
DavidThanks, that really helped a lot. I'm using zones to
"simulate" multiple-server deployment, as right now I
only have the one Solaris machine. I will be going
with multiple servers once I've figured out how to
get everything to play nicely together.Understood. You may need to be careful about zones, though. I think "sparse zones" are what you want.
>
I do have a question though. I noticed you described
splitting the services up between machines. Which
services should be together? As I mentioned in my
previous post, I had issues when trying to split
things up, various parts required other parts, and I
ended up with a lot of redundant installs of things,
and parts would not function until I configured those
redundant copies. I didn't see a need to have two
configured directory servers, when I only intended to
have one as the master at this point. I guess it will
just take some "toying" to figure out.You only need one Directory Server.
You only need one Messaging Server
You MAY need >1 web server.
The web server is there to host Delegated Admin (DA), to host Communication Express, and to host Access Manager.
>
Also, excuse my ignorance, but what is
"command-line"? I am guessing DA is delegated admin,
but I'm not sure about "command-line".command-line commands include:
start-msg
comm-admin
etc.
This is the way most Unix types like to work with software. The alternative is the GUI (Graphical User Interface). Delegated Admin is the GUI provided to manage users and groups. comm-admin is the command-line tool provided for that. I personally find the command-line tool easier to user.
>
So, to summarize, if you could let me know how to
split up the services you mentioned, and fill me in
on what "command-line" is, I'll be extremely
grateful.
Thank you again,
David
Maybe you are looking for
-
Possible solution to iOS 7.0.3 battery drain issue (iPhone 5).
Not a question as such, but for anyone who's having battery drain issues on iOS 7.0.3 and doesn't want to attempt upgrade to iOS 7.0.4 revision yet... I was having some problems with battery drain with my iPhone 5 since updating to 7.0.3. The device
-
I'm using Dreamweaver CS3 for Windows on a MAC with Parallels (OS Lion). When I try to type the £ sign, Dreamweaver repalces it with a Hashtag, a symbol which does not appear on my Mac keyboard. Don't have this probelm in any other programme. How do
-
I am receiving a 24.24 error message on my adobe audition 3 downloaded from the adobe site
I am receiving a 24.24 error message on my adobe audition 3 downloaded from the adobe site
-
Knowing new things for a fresh support project bi
Hi experts, I am new to this and we have a fresh support project which we need to know from other company1.The company1 has given support for client for some time now it is with company 2(with us). So can anyone plz help me what is it that i should k
-
IDVD '08/ It changes to me my aspect radio 4:3 movie to 16:9 why?
I tell you as it would be the aid, I capture a video by Cut End Pro, soon we exported an important film of quicktime 4:3(muy), when we armed the project in iDVD, we say to him that it is a project 4:3 since you have two options 4:3 and 16:9. when we