Weird Save as... issue - New page not visible on site

Wasn't sure what to call this thread, but I'll try my best to explain....
Basically, I have a site which uses a database to show details of safari lodges in Africa, for example here:
http://www.goodsafariguide.com/campkalahari/
So far so good - all working as it should.
However, we are moving the existing site to a new domain, www.goodsafariguide.net.
So I set up the new site definition in DW, copied all the files across, and uploaded them to the new domain. Pretty painless so far:
http://www.goodsafariguide.net
However, something with the database isn't playing ball - it should have been painless, as the two domains are hosted on the same reseller account, and so share the database. But the lodge pages were drawing a blank, for example:
http://www.goodsafariguide.net/alfajiri/
I've been working backwards to see what's causing the issue, and got a page working (minus the contact form):
http://www.goodsafariguide.net/campkalahari/index101.php
So I figured I could at least get most of the pages back simply by saving as... and changing the LodgeID to the relevant ID for each lodge. But when I tried that, those pages were not showing.
I've now tried literally just opening that /index101.php page, and saving it as /index102.php, not changing a thing, and uploading it.
But that's not even appearing:
http://www.goodsafariguide.net/campkalahari/index102.php
Sorry that was a bit long winded, but does anyone have any clue what might be getting messed up here?
Thank you!

Just to say I spotted the issue - was out of disk space and bandwidth for the account - it just threw me as it cropped up as an issue in the middle of me trying to figure out the original issue.

Similar Messages

Option save as to sharepoint is not visible...

hi eb
i cant see the save to sharepoint option in a power pivot workbook...
any idea y??
TIA!
Rea

Thanks i guess uploading from moss would work of course
but i cant understand why the save as to sharepoint is not visible under the file -> save as menu...
Hello,
Please refer to the following similar thread about this issue:
http://social.technet.microsoft.com/Forums/en-US/5e82821a-a31a-492d-8cdf-098562df595c/excel-2013-save-to-sharepoint?forum=excel
In addition, publishing PowerPivot workbooks to SharePoint requires that you have sufficient permissions, software, and knowledge of how to prepare your workbook for publication. For more information, please see:
http://technet.microsoft.com/en-us/library/gg413425.aspx
Regards,
Elvis Long
TechNet Community Support

Why Can't I Add a New Page To My WP Site?

I have a Wordpress site. I wanted to add a new page to it. However, when I try, I am able to type inside of the "Title" box & I am able to type inside of the "Post Excerpt (Meta Description)" box. However, I cannot type inside of the main body box where the actual content of my page would appear.
This seems to be a browser issue because I can do it if I use Internet Explorer. Why does Firefox prevent me from editing or adding a new page to my Wordpress site?
Thanks.

No. I cannot even get the flashing cursor to appear in that box.

I am having issues with parts of my Facebook news page not showing and games not running.

For the last three days, I have been having issues running Facebook on Firefox. First, the side panels on the news page are not showing, which means I cannot connect to games like Farmville or Bejeweled Blitz. Those side panels were showing the previous two days, but when trying to connect, I had a message about the secure setting and I would get the message "you are no longer logged onto FB, connect to FB to play".

Try clearing cache and cookies. Next make sure your plug-ins are up to date. If both do not resolve you issue try [[Safe mode]]
If you issue is resolved by this post please click Solved it! so we can assist others.

New objects not visible in report objectpicker

Hi, I'm new to SCOM so please forgive me if I say something wrong.
We are using SCOM 2007 R2.
In Operations Console I've created 2 new Web Applications in Authoring view.
In Reporting view I open Availability report from Microsoft Generic Report Library
Click Add Object
Search for Web Application I've created and get nothing
For some reason I see only old objects when search or view all available in report. I tried to use old Management Package and created my own (I thought the problem was in sealed MP, but my new is unsealed). Found similar problem in "Missing Objects
in Report Objectpicke" question, but we have less than 100 monitoring agents.
So I have no idea why objects are not visible, could you please help?

Verify from Group {contain all computers that you want} that using in Reporting.
You also check below link, it's similar issue
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5cb0fb12-73c5-4553-987f-ea415babd876/missing-objects-in-report-objectpicker?forum=operationsmanagerreporting
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

New Pages not opening some documents

Why can I open some of my Pages documents and some others say that a newer version of Pages is avail for download in the App Store? I go to the App Store and it says that I have already downloaded and installed the newer version. Please tell me what I can do.

I encountered problems with opening some documents on Pages for iMac (v5.1) as well. Specifically, the documents contained mathematical symbols, and were stored on the iCloud.
When I dragged the document out of iCloud, and onto the desktop, I could open and edit the documents without issue. When I moved them back to the iCloud, I once again could not open them with Pages for iMac. However, I could edit them without issue from my iPhone.
Moving the document out the iCloud to the desktop, in order to open and edit them, and then moving them back to the iCloud so they can be accessed everywhere else, is clearly a work around, not a solution. And it seems to only apply to my documents with mathematical symbols. Which particular symbol(s) is/are the issue, I have not investigated.

Shortcuts on ain page not visible

Sometimes shortcuts to internet pages are not visible. They are there and they work but i can't see them. I have nokia 930. Am I the only one?

Hi prundorfa,
Welcome to the forum!
When you say shortcuts, you're referring to mobile websites that you pinned to the phone's start screen, right? Does the issue happen to all website shortcuts you have in your phone, or to particular ones only? Do you also mean that the shortcuts are on the phone, but they are hidden? Provide us more details about the issue so we can easily search for the solution to your concern. If possible, share some screenshots or videos of the issue for reference.
We'll wait for your reply.

Published Page not visible

I am new to Dreamweaver and I recently inherited our website to maintain, using Dreamweaver CS3. I made some updates to a page but after I "put" them the changes are not visible. Here is what happens; If I go the our website to view the page, hover over the main menu for the page, then scroll down and pick the page the page is unchanged. If I then click on any other page then go back to the page I changed, my changes show fine...not sure what I am doing wrong that the changes are not posted immediately.
Please feel free to check it out. www.brattonsteel.com, hover over products, click stair systems. If you see my changes, you will see three names, phone numbers and email address near the top. If you don't see them, click a different page, then go back to the stair systems page and you will see them.
Thank you,
David

Two different pages
The link below is the correct page where you have made your changes:
http://www.brattonsteel.com/products-stair.htm
The link below is the original page which is accessed via the homepage.
http://www.brattonsteel.com/stairsystems.htm
Make sure your navigation links all point to the correct page.

Templates for New Pages Not Updating

I am a site admin with 7 Contributors accessing my site via
Contribute 3. I have created templates for them to use to create
their new pages. These templates allow them to only edit text; they
cannot update styles or layout in any way. I have noticed that,
whenever I make updates to my templates and resave them out onto
the server, some of my Contributors will pick up the new template
and some will not. Is there any way to force them to pull the new
templates? I have asked them to all Refresh Templates before they
create new ones....they tell me that they have, but they are still
pulling the old template. This causes an issue because, if they
pull the old template, I have to open their page in Dreamweaver and
update the template. Doing this on 30+ pages each month gets quite
tiring and almost defeats the purpose of Contribute for me. Any
suggestions on this issue are much appreciated!

Perhaps - and this is just a guess - the template references
in the pages have got messed up. Something I've noticed is that
template names with spaces in them get messed up by Contribute. At
the top of each web page based on a template is the  tag. If the template name
in there contains spaces it will sometimes get URL-encoded, i.e.
spaces become %20, and then Dreamweaver no longer recognizes the
template name as matching the one you're editing. Best practice
seems to be a an all character template file name.

How do i put apps on a new page, not the game center

i tryed to install new apps to my sisters ipod touch, they keep going in the game center and not on a new page. She dosent have wifi to use with the game center so how can i get them out of there. ive tryed to drag and place them from the app screen on itunes and the appeare but are not on the ipod

Sign in to the iPhone or connect the phone to the computer and sign into the store using the original ID and download the apps to the phone?

Iviews in home page not visible when I assign eu_role to portal users

Hey guys,
For the tool area search, I had access denied error. So I have assigned eu_role to the portal users and I am able to search now in the tool area.. But the problem is when I assign this eu_role to the portal users I am not able to see some iviews in my home page.. Like I had webdynpro iview and km document iview which are not visible now. And in place of KM document iview its showing me with this message:
Links :There are no items to display (Organize Entries)
Suggest me with some help.
Regards
PP

Hi Priyanka,
Just refer these helps for getting idea on PCD Repository Manager.
http://help.sap.com/saphelp_nw04/helpdata/en/76/a8934259a5cc6ae10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b2/d59a4271c80a31e10000000a1550b0/content.htm
It is clearly mentioned in this document that ,
<i>To index the PCD repository, always choose the Portal Roles Search service. Do not choose the services TREX Search or TREX Search and Classification, because these services index the entire PCD. Thus, the search results would also contain iViews and portal pages that are not part of the role of the logged-on user. This ensures error-free navigation.</i>
Regards,
Kishor Gopinathan

WRV210 Administration pages not visible in Internet Explorer

I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages. An image of the Status Router page is inserted below. I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
I haven't run across any other entries like on this or other sites. Are there any known solutions to this?

I have a WRV210 at a client site, and after upgrading to firmware 2.0.1.5 I've noticed the same behaviour. Upon inspection of the HTML I notive the right-pane-content area contains a
element right before the form begins. This tag was intended to hold a background image/style for the content area, probably white or at least some colour other than the already blue page background. It has a defined width and height of 1000px * 2622px; If I remove the and re-render the page, the form displays at the top. So it seems this was supposed to encompass the form, but instead because it self-terminates, precedes it with a vacant space 2622px high; It seems then that this is indeed a bug, in many pages.
I've also noticed that the web server on this router is annoyingly slow, though I can't remember if it's any slower than the previous firmware revision. I, like many, purchase Cisco products for the promise of higher quality, greater stability, and better support/documentation/community than other competing manufacturers. Sometimes you win....

Internet Explorer on imac M5521 some pages not visible

Help ... I just bought a used imac M5521 ... it works perfect except when I try to go some pages on the internet they are huge! but other pages are just fine .. i don't know how to fix this and i'm not sure about using IE on a mac anyway ... how can change my browser to safari or firefox? the apple page is not visible on my imac ... any suggestions????

There is no Safari or Firefox for Mac OS 9.
This (below) is the best you can do for web browsing under Mac OS 9. It's a special build of Mozilla 1.3.1.
http://www.wamcom.org/
Still not up-to-date by any means, but a lot better than IE5.

Blog Page Not visible after upload

I just added a blog page to my existing site. The file shows up in remote server but is not visible when I go to my website. Any suggestions?

Test your site by publishing to a local folder...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... and launch it in the browser by double clicking the index.html file.
If this version works OK then it means that you have not uploaded all the required files to the server or they are not in the correct place.
Do an Option-Command-A in Safari to see if all the files are present in the Activity window.

When say opening my mail box a new pages opens to a site not where I selected to go have run anitvirus scans with no problems found any ideas.

When opening my email a new page opens in my browser it may be just a normal site or my WOT warns of danger. If I X the new browser and go back to my email all is normal until I ask for the email again a a later time. Have run numerous virus scans and superantispyware scans with no problems found. also when opening a google search when I click on a site a new google search opens with the same search information.

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Weird Save as... issue - New page not visible on site

Similar Messages

Maybe you are looking for