Weird "secret service operation failed" message

Hi,
Using the subversion commandline works fine but I also get the following message everytime I run an svn command:
svn ls
Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
src/
doc/
pom.xml
Any hints what might be causing the problem?
I cannot find anything related on the web except wireless / segfault related issues but I do not use wireless and there are no errors because the svn commands work as expected.

I'm receiving the same error, It does appear to be something to do with pcmanfm as you can see below (on my system it seems to be anyways).
I havn't found a way to fix as of yet, I'm quite new to linux so googling and what little I've learned are my only resources atm
@archbang ~]$ gksu pcmanfm
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
(pcmanfm:28673): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
hopefully that's of some help ....to someone

Similar Messages

Gkr-Message: secret service operation failed: The name org.freedesktop

When I run svn update in my terminal window, I get lots of these errors..:
Gkr-Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
What is this and how do I remove the error?
Regards,
BTJ

If you dont want to store your passwords on harddisk, you can disable it by edit the following lines in ~/.subversion/config
password-stores =
store-passwords = no
Last edited by Corubba (2011-10-31 10:52:51)

"Resend" option is not working for specific user. "The Operation Failed" Exchange 2010 Outlook 2013

Hi Everybody. I have a weird one for you.
I have a user that gets an "operation failed" message whenever trying to use the "resend" option on any email (It's the one right under recall). I had tested up and down on her machine. Exchange 2010 Outlook 2013
Ran in safe mode, recreated her profile, disabled virus scanning, repaired office. (weird, the font just changed sizes on me)
After all of this I tested on other computers, other users seem to be able to "resend" just fine. However her account does not work on any computer I try, internal or external to the network.
It looks more like a profile issue.
She's a very active archivist, so she only has 486MB of space used by her mailbox.
It's well under quota.
It's been really puzzling me.
MCSE 2003, Exchange. MCTS Vista, 7. Administrator of awful, neglected website http://timssims.net

Hi Timssims,
Since there is only one user in the org has this issue, it seems an issue on the Outlook client side.
I suggest asking Outlook Forum for help so that we can get more professional suggestions.
For your convenience:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
However I also have some suggestions for your reference:
1. If this issue occur on Cached Mode, I suggest turning to Online Mode for testing.
2. Please also paste the detailed error message if "operation failed" is not the
complete information.
3. If still not works after perform operations above (including suggestions from Outlook Forum), I suggest re-creating a new mailbox for the specific user just as Martin suggested.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Activating HTTPS services causes Error message

Hi,
I am trying to activate HTTPS service in ICM Monitor GOTO > Service > Activate
and getting Operation failed message with rc=1. Any idea please let me know step by step to activate HTTPS services.
Thanks in advance
Regards
Srinivas

to enable HTTPS you have to do the following steps explained in this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/65/6a563cef658a06e10000000a11405a/frameset.htm
Regards
Raja

"Operation Failed" Messsage While editing documents locally

Hi,
I am getting a "Operation Failed" Message while i try to edit a document locally. What could be the possible problem?
Regards
Nithya

Hello Nithya,
We have had the same problems .We have a lock down desktop concept which means that the some .dll files(for activex to work) required for editing are not always registered/allowed to run.
You could refer to note 755581
I have the same problem wherein employees are not allowed to change the settings there are two solutions to it.Iam speaking to my network guys to get this sorted we have tested this on a remote client and it works after registering two .dll files.
1)Use applet version.(But needs JRE installed on all client machines).
2)Speak to your network administrator and get this two .dll files registered.
or you can check with browser settings and make those changes.You can use some scripts which registers when they login.
I would like to add that when i use domain adminstrator user account i get a pop up to install the activex.
I am thank full to the sdn community who helped me to narrow down on this front.
Should you need any details please feel free to post back.
Regards
Ajey

Nokia 6230i operation failed

hi!
I'm using a Nokia 6230i version 1.4, Nokia PC suite 6.8 and Bluetooth software 1.4.1 build 7, and Windows XP 2.
the problem is i can't install an application from the nokia application installer. i can see the other applications installed on my phone but whenever i try to install another one, it keeps me an "operation failed" message. in the past, i have installed more than five applications, but now, i can't install a single app.
please do help me. thanks!Message Edited by imhoney28 on 24-Jul-2006
02:30 AM

Hi,
I think that reason is this: There are not enough free memory for applications anymore (BTW: free memory for applications is smaller than phone's whole free memory)
Delete not needed applications from phone and try again...

Nokia 3600 - Go to Music Player - Operation Failed

This is the second time that I have tried to post this message.
Nokia 3600
Software V05.20 RM-3352
When I select Menu > Media > Music Player > Go to Music Player I get the message "Operation Failed".
However, if I select Menu > Media > Music Player > All Songs > Play I can play my music files (but I still get the "Operation Failed" message.
At no time do I see the Music Player and have to to turn my phone off to stop the music files from playing.
What can I do to fix this problem?

i hav the same problem in my phone music player not working displaying operation failed. please help me out.
kimmadscientist wrote:
Hello! I got exactly the same problem with my Nokia 7210 supernova. It started when I was playing an mp3 while trying to explore the settings. I tried changing the player theme and all of a sudden I got the error message. I thought a restart would do the trick but didn't. I even tried "hard" reformat (everything in the phone is restored) but still no luck.
I will try to update my firmware tomorrow and I'll let you know if it solves the problem..
kimmadscientist wrote:
Hello! I got exactly the same problem with my Nokia 7210 supernova. It started when I was playing an mp3 while trying to explore the settings. I tried changing the player theme and all of a sudden I got the error message. I thought a restart would do the trick but didn't. I even tried "hard" reformat (everything in the phone is restored) but still no luck.
I will try to update my firmware tomorrow and I'll let you know if it solves the problem..

Phone 6822 connected but operations fail

My Nokia PC Suite browser shows my phone (6822) is connected but when I try to transfer files I get an "operation failed" message. What can I do to correct this?

Hi @rstann,
Welcome to the HP Forums!
I see that you are having trouble setting up the fax with your HP Officejet 6830 printer. I am happy to help!
Please take a look through this guide, Sending and Receiving Faxes with the HP Officejet 6810 and Officejet Pro 6830 e-All-in-One Printer S.... In the frequently asked questions portion, under I can't send or receive faxes. What should I do? It states:
Step one: Check the physical connections
Disconnect the telephone cord from the printer and phone jack, and then examine the connector on the end of the cord. Make sure that the cord has only two wires. If you see four wires, replace the cord with one containing only two wires.
Figure : Example of a two-wire connector
Figure : Example of a four-wire connector
Hope this clears things up for you, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Problems in installing jar file in Sony Ericsson Elm & K800i - Operation Failed

HI all,
We have developed a J2ME application, the .jar file of the application is not getting installed in some of the Sony Ericsson devices such as Elm, K800i etc - getting 'Operation failed' message. But it is getting successfully installed in some other devices. Can anyone let us know what could be the problem even though the devices are MIDP 2.0 and CLDC 1.1 supported.

http://developer.sonyericsson.com/wportal/devworld/phones/phone-overview/elm?cc=gb&lc=en Since I don't know which Java app you have developed, I can only suggest you use this SE Developer world page to compare JSRs& APIs between SE phones that allow its installation and those that don't, and see if this gives you an answer.Failing that, check for any differences in the security certificates and/or run a software update/master reset on the phones that don't allow installation and see if that helps.

Web Service execution failed for operation: ReadLogFile

Hello,
im getting the following error message in almost all of my Diagnostic Agent log files:
[MAIJobObserver] ERROR occurred for metric collection
00000000000000000019[com.sap.smd.mai.model.collector.SAPControlWSCollector].
[EXCEPTION]
com.sap.smd.mai.model.collector.CollectorException:
[SAPControlWSCollector.collect] Web Service execution failed for operation:
ReadLogFile. Collector : [SAPControlWSCollector]
Id: 00000000000000000019,
SID: EPX, instance number:00
at
com.sap.smd.mai.model.collector.SAPControlWSCollector.collect(SAPControlWSCollector.java:200)
at
com.sap.smd.mai.job.MetricJobRunner.run(MetricJobRunner.java:25)
at
com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:46)
at
com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
at
java.lang.Thread.run(Thread.java:722)
Caused by: java.rmi.RemoteException:
Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException:
Invalid Response Code: (401) Unauthorized. The requested URL
was:http://<hostname>:50013/SAPControl.cgi
I checked on SAP note 1563660 - sapcontrol, <sid>adm authorization issues (SUM) and confirmed, that ALL installations of the "sapuxuserchk" program are set with "chown root.sapsys" and "chmod u+s,o-rwx". I restarted the diagnostic Agent aftwards.
I also checked on host_profile an made sure, that the parameter "service/admin_users = daaadm" is set.
Still I get the above error messages, so I am at a loss what else to do...
A lot of thanks for your Support !
Best regards,
Thorsten

Hi Thorsten,
Please check the user used for registration of Diagnostic agent to Solution Manager has appropriate roles assigned (e.g. user SMD_ADMIN)
Also please update to latest patch of SAP Host agent and then try again.
Hope this helps
Thanks & Regards,
Nisha

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

Error message when opening Outlook: The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.

In an Exchange 2010 server/Outlook 2013 environment, one of our users is getting an error message every time they start Outlook. The error message says: "The operation failed. The messaging interfaces have returned an unknown error. If the problem
persists, restart Outlook."
The error log message details are as follow:
System
Provider
[ Name]
Microsoft Office 15 Alerts
EventID
300
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T15:54:49.000000000Z
EventRecordID
655
Channel
OAlerts
Computer
Computer-Name.domain.local
Security
EventData
Microsoft Outlook
The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
301670
15.0.4420.1017
xyfc
0x8004011B
The system is as follows:
Size of .pst file: 2.3 GB (Unicode format so there should be plenty of space left)
OS: Windows 7 (64-Bit)
Application: Outlook 2013 (32-Bit)
The user upgraded from Outlook 2010 a few months ago and the error message has only recently started appearing on startup. I thought it was a corrupt mail profile, so I have already tried creating a new mail profile, as well as the repairing tool in Outlook.
I even tested another email account and that worked just fine. So apparently it is something wrong with the specific user's account/profile and not something wrong with the computer - since my email account worked fine on his computer.
Any help would be greatly appreciated.

I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.

The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?

Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

Hello
I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
Create protection group: Protection Group 1 failed:
Error 360: The operation failed due to a virtual disk service error
Error details: The system cannot find the file specified
Recommended action: Retry the operation.
The environment is as follows;
- Virtual Machine Running Server 2008 R2 Fully updated
- Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
- Have connected to Session 0 (console)
- Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10 for the VDS Dynamic Provider
Can Anyone Help?
Thanks
.Adam Langdon

Hi,
Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Remote Desktop Services Properties - Operation failed: Access is denied

Hi
when i try to change the Remote Desktop Services User Profile Path with ADUC i get the error "Operation failed: Access is denied"
This error occurs in a subdomain with the Domain Admin of the Subdomain. I'm able to change this attribute with the Enterprise Admin.
As far as I understand this attribute is set in the userParameters but I don't know what permissions must be set to allow the Domain Admin to change this Attribute and why the Enterprise Admin is allowed to change the Attribute and the subdomain Admin not.
Our AD Schema is 2003.

Hi,
As per I know, this is by design because enterprise admin has full control in every domain within the forest but sub domain admin only has full control in its own domain. SO when subdomain admin try to modify they receive error instead of enterprise admin.
But still if you want to assign the permission to subdomain user to change then you can delegate below permission to user.
Read msTSProfilePath
Write msTSProfilePath
Snap:
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Weird "secret service operation failed" message

Similar Messages

Maybe you are looking for