Weird start up 1/4 of the screen with big pixels

Before loading the screen in wich you pick the user, a 1/4 of the screen show you big pixels as if there was a major crash on the system but then after a few seconds goes away back normal -.-

Retina display support has been around in Flash Player for a long time at this point, and this issue is not reproducing for me on my retina macbook pro with either the generally available or ESR version of Firefox. This really sounds like an issue with GPU drivers, and it's probably specific to the particular model that you're using.
You can verify this by temporarily disabling hardware acceleration. It's described in the troubleshooting guide, here: Video playback issues
If disabling hardware acceleration fixes it temporarily, please follow the directions in the troubleshooting guide about copying and posting the relevant system info. I'll try and hunt down an equivalent machine and get someone to triage it. It will probably mean that we just end up filing a bug with Apple on the issue and/or blacklisting that particular driver/card combo until a patch is available, but we're happy to do that.
Also, not all YouTube videos are encoded the same way. A direct link to a video that demonstrates the problem (and any specifics, like quality settings or full-screen vs. embedded) would be helpful. I'm definitely not seeing this on the handful of videos I sampled, and this machine is my daily driver...
Out of curiosity, does it reproduce both when the machine is plugged in and on battery? Some of the machines have two graphics chipsets, and switch to the lower powered ones when on battery.

Similar Messages

When i open my computer I get the white screen with apple symbol and there are vertical lines all over the screen with green pixels and after a few minutes the screen gets grey and I get message to restart my computer what happens

3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
Can somebody advise me on this matter. Thanks in advance

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login. What should I do?

I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
Please Help!!

Somewhat similar problem:
Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual. Drives me mad. It doesn't happen with a fresh Lion installation, nor if booted into safe mode. On the machine in question it also happens to new user accounts.
I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences. I've removed Little Snitch and PeerGuardian (no more third party kexts).
@Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
Any ideas would be gratefully received.
Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway.

When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.

When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?

Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing.

My Macbook Pro *****! I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button.

I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button. a 2 week old computer is not supposed to do this! it wastes all its time being so flashy that it just craps out all the time. sometimes i feel like i should have stayed with my virus covered PC. at least when it shut down randomly you could turn it back on, but with the macbook pro, it just keeps restarting itself over and over. need help with this, any answers?

Here's a novel thought. Take it back to the vendor. Should have done that one week ago.

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

MacBook Pro won't boot at start. I get a white screen with a blinking folder with a question mark in the middle. Any ideas?

Read this article...
http://support.apple.com/kb/TS1440?viewlocale=en_US&locale=en_US

Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.

Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.

This is not just annoying, it is wrong, because at the end of the trial it will stop completely. You must resolve it before then.
So, did you do anything to license the trial version? It needs to be told that you have purchased, or it will stop working at the end of the trial.

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg():Socket is not connected

My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected

If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.

When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!

When I start my mac book pro the screen flashes on and off and then a blue color before it open to the log in screen. Sometime a program will shot down buy it's self without me clicking the quit button. Help?!

If you keep getting a 'red' message it means that the HDD is faulty and will have to be replaced. You will have to format the new HDD in Disk Utility>Erase and then install the OSX and your data from Time Machine.
Ciao.

Hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

Your boot drive is damaged in some way. If you have an original installation disc, you can boot from that and run Disk Utility. From DU you can select your internal hard drive ("Macintosh HD" is the name Apple puts on it - you may have renamed yours) and select "Verify Disk". If errors come up, try "Repair Disk". If it repairs, then you should be able to restart and boot from it. If it doesn't show up or won't repair, your drive is probably hosed.
Clinton

Refurbished iPod touch 3rd gen won't start. Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help,

Refurbished iPod touch 3rd gen won't start. Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help!

I have tried holding the power home button but all that does is turn it off. When I try to start it again it goes into the same loop.

Last night i was downloading the new update for the Iphone, and after the download was done and trying to install, it errored out. And now my phone is stuck on the screen with the itunes icon and the USB.

Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.

slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222

When i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i

when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?

SORRY, the picture is just to illustrate and to better show the area where the time display is located, same place in the iPhone 3gs, to my knowledge, the location is the same, due to the OS on both phones.
Second, run the test to see if it works:
1st test: go to phone mode, select dial key pad, put the tip of your thumb in top of the time display ( the screen will not go black), try to dial.
2nd test: place a call, after starts ringing switch the display to dial pad, put the tip of your thumb on top of the time display, the screen will not go black, try to dial.
THE SCREEN WILL ONLY GO BLACK ( INACTIVE) IF YOU TOUCH A LARGER AREA TO THE TOP OF THE DISPLAY, IF THE THUMB ONLY TOUCHES THE TIME DISPLAY AND A LITTLE PART OF THE AREA WHERE THE NUMBERS APPEAR THE DIAL PAD DID NOT WORK EVEN WITH THE DISPLAY NOT GOING BLACK (INACTIVE).
I am also trying in my wife's iPhone 4 as I right this post and both phones behave the same way.
I found out what I stated above after running tests to see if the case was affecting the phones performance.
Due to the thickness of the case on the sensor area, it really did affect the way the sensor was supposed to work, after I cut that part on the case, the sensor started to work perfectly and the screen turns off during a call like it is supposed to do.
So before someone go nuts thinking that the phone is not working and that they have to take it to repair, try seeing if the case is not interfering with the phones performance.

Whenever I open a new Firefox Browser, the other Firefox Browsers that I have minimized to the bottom of the screen all restore, (reopen up) onto the screen with the new opened Firefox Browser, how do I stop this? Just want the new one to open on screen

Whenever I open a new Firefox Browser, the other Firefox Browsers that I have minimized to the bottom of the screen all restore, (reopen up) onto the screen with the new opened Firefox Browser, how do I stop this? Just want the new one to open on screen and the existing stay minimized.
== This happened ==
Every time Firefox opened
== I think when a I updated or downloaded a newer version of FireFox at Firefox's suggestion.

Hmm that does sound a bit strange - I use a system quite similar to yours (XP, FF 3.6.3), and don't see this behaviour.
I would recommend trying to start Firefox in Firefox [[Safe Mode]] (make sure you close '''all''' running Firefox instances first), and see if this problem persists.
If not, it could be some add-on causing this behaviour - restart Firefox in Safe Mode, disable all add-ons, and enable them one by one to find the guilty one.
If it still happens in Firefox Safe Mode, some other program (or something in Windows itself) most likely is the cause. We may be able to help with this too, so let us know what works and provide as much additional information as possible to let us help you solve this.
Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help you better, plus enables us to better help other users with similar issues.

Weird start up 1/4 of the screen with big pixels

Similar Messages

Maybe you are looking for