Weird Startup Chime / Hit-And-Miss Booting / freeze when door is closed!
I have a Digital Audio - originally 466.
Upon startup, instead of hearing "BONG" I hear "B-static-O-static-N-static-G-static"
Most of the time, the computer boots fine. Sometimes it will never send signal to the displays. rarely, i'll hit the power button, and hear the remixed chime, but the power button goes out - the the case fans still running.
Also, if I keep the door to the computer closed, the computer will eventually freeze or panic.
Replaced onboard battery, reset stuff in OF, replaced ram, replaced vidcard, has two hard drives, has cpu upgrade to dual 1ghz.
I'm stumped!
All of the fans work properly, nice and clean inside, too.
Nothing plugged into the audio ports - use a USB audio interface. The goofy startup noise happens irrespective of the use of the audio port.
the CPU is a sanctioned (or whatever) OWC upgrade.
Similar Messages
-
MBA repeats startup chime but doesn't boot up. Why?
MBA timed out while Applejack was running then shut down and now repeats startup chime but fails to boot up.
And exactly what MBP model do you have? What version of OS X is installed? What version of AppleJack did you use?
-
Bridge CS5 - Adding metadata to RAW files is hit and miss
Can someone help me??? Bridge CS5 will only add the metadata I enter to the files it feels like doing. It is hit and miss. Some files will add it, and other files will get the message "There was an error writing metadata to 100824_Banks_06.NEF". It will go through my whole folder of RAW files, then other times it will allow one or two of the files to get the information. I am going crazy! Is this a preference setting issue, or what?
Tai Lao wrote:
Bridge is the weakest of all Adobe applications I use. It suffers from the same issues since its first release, when we were told to forgive the teething problems of any version 1 application. Now it's in version 4.x.
I actually spent most of the last two days wrestling with Bridge, and getty pretty annoyed with it. The "Error writing metadata" bug caused me no end of problems in trying to reorganise my keywording of 20,000 photos, and turning the air blue in the process.
I agree that Bridge seems to be the poor relation in the Creative Suite. I call it the Less Glamourous Sister. It needs to be 64-bit to host 64-bit Camera Raw, and it needs to manage resources faster and more efficiently.
I've spent a fair amount of time watching Bridge's activity with a resources monitor utility, and it's a very busy lady. It seems to poll several drives every second or two, accessing the registry, disk-based settings and library files regularly too, even when it appears to be doing nothing. And, even though I had indexed and cached my whole 20,000 photo collection, Bridge insists on recreating some thumbnails and previews at random intervals.*
I decided that the anti-virus software suggestion was a red herring in my case (I now realise this is the Mac forum anyway). Photos which gave an error became subsequently locked for several minutes, and I had to edit the sidecar files by hand. In the end, I worked out that, even though there is no on-screen indication of activity, Bridge is quietly working its way through every item in the Content pane, and it is this action which seems to coincide with the Metadata Error. Wait for it to end, and chances are much reduced, but not fully removed.
Oh, and Adobe's customer treatment might be debatable, but that helpful customer you quoted was a regular abuser of other forum users, so I like to see a silver lining from that post.
* Prefer Embedded thumbnails was also selected.
Message was edited by: Yammer P -
Why won't my iMac print consistantly to my compatible HP 6500A? I've checked for updates and downloaded the lasted software...still can't print. All my other Mac devices find the printer but the iMac is hit and miss. I'm operating the Mac OS X Lion 10.7.
When you say hit and miss do you mean sometimes you print a whole document with no problems, or do you mean each document has problems? This is from HP's website for your printer:
Your sig says 10.6.7 but your message says 10.7. So if it's really Lion, this printer isn't officially supported. Elsewhere on HP's site it says updated drivers will be available on your Mac via Software Update. Have you run that recently? -
I am finding this feature to be very hit and miss. I have a lot of folders with full-on, well-exposed face shots that LR is not picking up faces in, and other folders with partial faces that are obscured, dark, or over blown that it is picking out faces in. Then there were the random squiggles of grass that LR thought was my very bald brother...
There doesn't seem to be a way to get it to re-check folders, and "find similar faces" doesn't seem to do anything but look for faces I've already confirmed - the naming makes it seem like if you say, "Hey, here's a face to look for," it would go back through the folder/catalog and look for similar faces that weren't already picked out.
It's got potential, but in its current state, I'm going to have to go through and manually choose faces in thousands of photos that LR theoretically should be picking out. Bummer.
Keep working on it, Adobe.My experience so far with LRs face detection is a little disappointing as well.
I understand that machine face recognition has severe limits. Persons age, change in expression, glasses, hats... not to speak of angle of shooting, light conditions etc etc. Plus it needs to be computationally feasible.
And yet when I started to name a person, particularly after having tagged some childhood pictures, the suggestions started to get very very odd, including faces from the opposite sex, some graphic ornaments on a wall, and ancient Greek statues.
And then going through a large collection (again!), with thousands of clicks...
Adding to the disappointment: Although LR CC writes face data to XMP-mwg-rs tags (jay!), it does NOT read and process existing XMP-mwg-rs written by other software (Nooooooo!).
Thousands and thousands clicks to go, again... -
Obtain cache hit and miss statistics
Hi,
I have a cache developed in-house, which implements the HashMap functionalities of get(key), put(key, object) etc, and in addition, maintains hit and miss counts. I'm trying to replace this cache with Coherence because eventually I wish to migrate to a distributed cache. It's essential, therefore, that I fit Coherence into my application in such a way that though I would currently be using Coherence's local cache functionality, later I should be able to use the distributed cache functionality without any changes to my code. Hence, I'm using CacheFactory to obtain a cache whose config I define in the coherence-config.xml file. Here's my problem: I notice that CacheFactory.getCache() returns an object that implements NamedCache. This interface does NOT support the maintenance of cache hit and miss counts. I need this functionality! How do I work around this?
Thanks,
Lakshmi.Hi Lakshmi,
It would look something like this:
// This example uses the default
// coherence-cache-config.xml which maps all cache
// names starting with 'local-' to a 'local-scheme'
String sCacheName = "local-test";
NamedCache cache = CacheFactory.getCache(sCacheName);
CacheService service = cache.getCacheService();
Map mapLocal = ((DefaultConfigurableCacheFactory.Manager) service.getBackingMapManager()).getBackingMap(sCacheName);
if (mapLocal instanceof LocalCache)
LocalCache cacheLocal = (LocalCache) mapLocal;
out("Misses: " + cacheLocal.getCacheMisses());
}Hope this helps.
Later,
Rob Misek
Tangosol, Inc.
Message was edited by: rmisek -
I connect to shares on a Win 2003 box and an Ubuntu samba server with NTLMv2. But shares on a Win XP sp3 box and a Win 7 sp1 VM will only connect if I use sec=ntlm. Matching the settings on the problem machines to the 2k3 box (local security policy and a running NTLM-related service) had no effect. I spent hours googling yesterday, the only solution I found to NTLMv2 connection problems was... use NTLMv1.
Does anyone have shares on XP or 7 connected with NTLMv2? If so, do you remember if you had to modify anything to get it working?The performance is really hit and miss.
Do you mean apart from the issue of messages not showing up in the Inbox?
Are your really using Mac OS X 10.4.3, as your profile indicates?
the messages are there, there just seems to be an
issue pulling them into Mail.
Try rebuilding the Inbox, i.e. select it and do Mailbox > Rebuild. -
I have an Imac 2.4GHz running Leopard 10.5.8. We have 4 calendars, and the alarms are hit and miss. Sometimes they go off, and sometimes not. And sometimes they go off a day later. Any suggestions?
Thanks,
Todd FrankThe performance is really hit and miss.
Do you mean apart from the issue of messages not showing up in the Inbox?
Are your really using Mac OS X 10.4.3, as your profile indicates?
the messages are there, there just seems to be an
issue pulling them into Mail.
Try rebuilding the Inbox, i.e. select it and do Mailbox > Rebuild. -
Hit and Miss Behaviour With Exchange
I have Mail connecting to an Exchange server. The performance is really hit and miss. Sometimes messages appear in my mailbox literally hours after they were sent. Sometimes never. If I look at my account through the Exchange web interface the messages are there, there just seems to be an issue pulling them into Mail.
Anybody got any ideas?The performance is really hit and miss.
Do you mean apart from the issue of messages not showing up in the Inbox?
Are your really using Mac OS X 10.4.3, as your profile indicates?
the messages are there, there just seems to be an
issue pulling them into Mail.
Try rebuilding the Inbox, i.e. select it and do Mailbox > Rebuild. -
Since maverick (os X 10.9.1) has been installed my track pad on my mac book pro (late 2011) is hit and miss, reset it worked for a bit then seems to die. Doesn't matter what application I am using. This is on all internet browsers as well FF, Safari and chrome.
I took it to the apple store and they couldnt find anything wrong with it (as ive had other issues with it such as a kernal panic and optical drive spitting out dvds and not burning cds properly)
Its only scrolling it seems to have an issue with. All the othe gestures are fine ive even tried switching all the gesture off and on again, restarting the mac but the same problem persits a while later. It can be working for 10minutes or 8 hours and then boom no longer works.Remove Growl, DiVXHTML and other DIVX software (use MPEG4Streamclip or Smartconverter or Wondershare Videoconverter for videos you need to convert for your own use, and not for giving to others unless you own the copyright for it). Update your Adobe Flash from http://www.adobe.com/
Shut down Parallels except when you need to use. Disable Citrix and your File Sharing for VPN or remote access for Citrix except for when you use remote access. Find out how to remove Peerguardian. The Mac has its own firewall which blocks all except ping attacks through Apple menu -> System Preferences -> File Sharing. Use a hardware router to block ping attacks. Parallels has its own built-in networking firewall for Parallels itself.
This tip may uncover other slowdowns: https://discussions.apple.com/docs/DOC-6921 -
I updated to Safari 6.1 and now it freezes when opened
Yesterday I updated to Safari 6.1 and now it freezes when opened, although the overall system stays up. I updated to the latest Java and iTunes 11.1.2 at the same time. When I open Safari now, it pauses for a few seconds without going to the home page and then I get the spinning beach ball. I get two messages: One says that the plug-in for SplashID Safe has not been tested with this version of Safari (a message that I had been getting before the update and never caused a problem). The other message says, "Crash Protection It appears that Safari didn't quit properly. Do you want Glims to re-open your tabs anyway?" It gives me a choice to click "Cancel" or "OK". I have tried clicking them (before the beach ball appears) and it makes no difference. The version of Glims I am running is out-of-date.
The only available crash report is almost a month old and therefore is of no help.
I made a back-up with SuperDuper just before updating and can reverse the update if I do it soon, but I would like to get this working.
I would appreciate any advice.
Bill>>The version of Glims I am running is out-of-date.
How do I uninstall Glims? -
I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?
What version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
In any case, start by going to the editor preferences>general, clicking this button and restarting the editor: -
Address bar and search bar freeze when a pdf is open in Firefox 4
The address bar and search bar freeze when I open a PDF document in Firefox 4. I have Adobe Reader X installed.
This means you cannot type anything in the address bar for that tab or any other tab until you close that PDF.
Any ideas? Thanks! :)Oh it was a problem with Adobe's Plug-in. As per [https://support.mozilla.com/en-US/questions/804580#answer-167069 MrKoffee's answer ], I noticed that I already had Adobe Reader X installed but nevertheless I went to adobe.com to download it again. When I installed it this time, it said "installing updated patch". Went back to Firefox to check and problem solved! :)
Ps. did not need to disable any previous plug-in or even close Firefox. -
I have just got an iMac 21" and it continuously freezes when it goes to sleep and also when the internet is trying to load, i have tried three different browsers but it still does it (safari, google chrome and firefox), does anyone know what is wrong?
To fix the freezing when sleeping problem go to System Preferences>Energy Saver and set 'Computer Sleep' to 'Never'. It seems there is a problem for some with Bluetooth failing to wake after sleep. This fixes it 100% for me and many others on here, until Apple issue a software update to address it.
Not sure what to suggest on the internet problem. I assume you are connected and receive and send emails OK.
Edit: To try to troubleshoot the internet issue maybe try turning the Firewall off: System Preferences>Security & Privacy>Firewall tab. -
Booting freeze when starting setup virtual console
Sometimes the computer will freeze when booting into
Started setup virtual console
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
Thanks.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.5-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jul 10 07:10:15 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000376b0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000376b1000-0x00000000376b6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000376b7000-0x00000000377b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000377ba000-0x000000003780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003780f000-0x0000000037907fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037908000-0x0000000037b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b0f000-0x0000000037b17fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b18000-0x0000000037b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b1f000-0x0000000037b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b63000-0x0000000037b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037b9f000-0x0000000037bdffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037be0000-0x0000000037bfcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037bfd000-0x0000000037bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037c00000-0x0000000037dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000038000000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: LENOVO 2847A65/2847A65, BIOS 6JET85WW (1.43 ) 12/24/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37c00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 038000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask FC0000000 write-back
[ 0.000000] 3 base 037E00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f74c0-0x000f74cf] mapped at [c00f74c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x376b0fff]
[ 0.000000] [mem 0x37400000-0x376b0fff] page 4k
[ 0.000000] BRK [0x0179e000, 0x0179efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x376b7000-0x377b9fff]
[ 0.000000] [mem 0x376b7000-0x377b9fff] page 4k
[ 0.000000] RAMDISK: [mem 0x36ac0000-0x36dfcfff]
[ 0.000000] ACPI: RSDP 0x000F7190 000024 (v04 PTLTD )
[ 0.000000] ACPI: XSDT 0x37BF2BBD 000064 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: FACP 0x37BE4000 0000F4 (v03 LENOVO TP-6J 00001430 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x37BE5000 00A14B (v02 LENOVO TP-6J 00001430 INTL 20050624)
[ 0.000000] ACPI: FACS 0x37B9EFC0 000040
[ 0.000000] ACPI: HPET 0x37BFCEFC 000038 (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x37BFCF34 00003C (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x37BFCF70 000068 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x37BFCFD8 000028 (v01 LENOVO TP-6J 00001430 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x37BE3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE2000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE1000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377ba000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x37bfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x376b0fff]
[ 0.000000] node 0: [mem 0x376b7000-0x377b9fff]
[ 0.000000] node 0: [mem 0x3780f000-0x37907fff]
[ 0.000000] node 0: [mem 0x37b0f000-0x37b17fff]
[ 0.000000] node 0: [mem 0x37b1f000-0x37b62fff]
[ 0.000000] node 0: [mem 0x37b9f000-0x37bdffff]
[ 0.000000] node 0: [mem 0x37bfd000-0x37bfffff]
[ 0.000000] On node 0 totalpages: 227548
[ 0.000000] free_area_init_node: node 0, pgdat c1601e00, node_mem_map f6fb9020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223156 pages, LIFO batch:31
[ 0.000000] HighMem zone: 9 pages used for memmap
[ 0.000000] HighMem zone: 394 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x38000000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x376b1000-0x376b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x377ba000-0x3780efff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7798000 s33856 r0 d23488 u57344
[ 0.000000] pcpu-alloc: s33856 r0 d23488 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225772
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3bfa8024-2f62-4818-9393-5874bfc69f25 rw
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 1826808 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037c00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 889132K/910192K available (4447K kernel code, 481K rwdata, 1288K rodata, 564K init, 956K bss, 21060K reserved, 1576K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1616000 - 0xc16a3000 ( 564 kB)
.data : 0xc14582aa - 0xc1614400 (1776 kB)
.text : 0xc1000000 - 0xc14582aa (4448 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.872 MHz processor
[ 0.003345] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.31 BogoMIPS (lpj=6982906)
[ 0.003348] pid_max: default: 32768 minimum: 301
[ 0.003355] ACPI: Core revision 20140214
[ 0.019690] ACPI: All ACPI Tables successfully acquired
[ 0.020050] Security Framework initialized
[ 0.020059] Yama: becoming mindful.
[ 0.020075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020299] Initializing cgroup subsys memory
[ 0.020305] Initializing cgroup subsys devices
[ 0.020307] Initializing cgroup subsys freezer
[ 0.020309] Initializing cgroup subsys net_cls
[ 0.020313] Initializing cgroup subsys blkio
[ 0.020338] CPU: Physical Processor ID: 0
[ 0.020339] CPU: Processor Core ID: 0
[ 0.020342] mce: CPU supports 6 MCE banks
[ 0.020351] CPU0: Thermal monitoring enabled (TM1)
[ 0.020359] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.020459] Freeing SMP alternatives memory: 16K (c16a3000 - c16a7000)
[ 0.021230] ftrace: allocating 19105 entries in 38 pages
[ 0.026774] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027205] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061993] smpboot: CPU0: Intel Celeron(R) Dual-Core CPU T3500 @ 2.10GHz (fam: 06, model: 17, stepping: 0a)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076738] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083404] CPU 1 irqstacks, hard=f6516000 soft=f6518000
[ 0.083406] x86: Booting SMP configuration:
[ 0.083408] .... node #0, CPUs: #1
[ 0.006666] Initializing CPU#1
[ 0.096574] x86: Booted up 1 node, 2 CPUs
[ 0.096579] smpboot: Total of 2 processors activated (8382.63 BogoMIPS)
[ 0.096809] devtmpfs: initialized
[ 0.096921] PM: Registering ACPI NVS region [mem 0x37b63000-0x37b9efff] (245760 bytes)
[ 0.097916] pinctrl core: initialized pinctrl subsystem
[ 0.097971] RTC time: 21:12:51, date: 07/24/14
[ 0.098030] NET: Registered protocol family 16
[ 0.098149] cpuidle: using governor ladder
[ 0.098151] cpuidle: using governor menu
[ 0.098199] ACPI: bus type PCI registered
[ 0.098202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.098297] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.098300] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.098302] PCI: Using MMCONFIG for extended config space
[ 0.098303] PCI: Using configuration type 1 for base access
[ 0.098392] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.098393] mtrr: probably your BIOS does not setup all CPUs.
[ 0.098395] mtrr: corrected configuration.
[ 0.100073] ACPI: Added _OSI(Module Device)
[ 0.100073] ACPI: Added _OSI(Processor Device)
[ 0.100073] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100073] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107026] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.107995] ACPI: SSDT 0x37B18620 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.108621] ACPI: Dynamic OEM Table Load:
[ 0.108624] ACPI: SSDT 0x00000000 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.116947] ACPI: SSDT 0x37B19F20 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.117393] ACPI: Dynamic OEM Table Load:
[ 0.117395] ACPI: SSDT 0x00000000 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.130189] ACPI: Interpreter enabled
[ 0.130202] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.130208] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.130226] ACPI: (supports S0 S3 S4 S5)
[ 0.130228] ACPI: Using IOAPIC for interrupt routing
[ 0.130267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.144307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.144315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.144322] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.145146] PCI host bridge to bus 0000:00
[ 0.145151] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.145153] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.145156] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.145158] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.145161] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.145163] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.145166] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.145168] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[ 0.145181] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.145206] DMAR: Forcing write-buffer flush capability
[ 0.145208] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.145311] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.145327] pci 0000:00:02.0: reg 0x10: [mem 0xf2400000-0xf27fffff 64bit]
[ 0.145336] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.145343] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.145462] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.145475] pci 0000:00:02.1: reg 0x10: [mem 0xf2100000-0xf21fffff 64bit]
[ 0.145642] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.145703] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
[ 0.145829] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.145893] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.145953] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
[ 0.146079] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.146141] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1a.2: reg 0x20: [io 0x1860-0x187f]
[ 0.146201] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.146201] pci 0000:00:1a.7: reg 0x10: [mem 0xf2a04000-0xf2a043ff]
[ 0.146201] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.146201] pci 0000:00:1b.0: reg 0x10: [mem 0xf2a00000-0xf2a03fff 64bit]
[ 0.146201] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f]
[ 0.146201] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf]
[ 0.146201] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.146201] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.146266] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.146294] pci 0000:00:1d.7: reg 0x10: [mem 0xf2a04400-0xf2a047ff]
[ 0.146416] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.146489] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.146551] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.146682] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.146745] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.146992] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018a
[ 0.147016] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.147028] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.147040] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.147053] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.147065] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
[ 0.147077] pci 0000:00:1f.2: reg 0x24: [io 0x1810-0x181f]
[ 0.147093] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.147095] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.147098] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.147100] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.147232] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.147255] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.147286] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.147516] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
[ 0.147544] pci 0000:02:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff]
[ 0.147763] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.147840] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
[ 0.147866] pci 0000:02:00.2: reg 0x10: [mem 0xf2300400-0xf23004ff]
[ 0.148142] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
[ 0.148168] pci 0000:02:00.3: reg 0x10: [mem 0xf2300800-0xf23008ff]
[ 0.148441] pci 0000:02:00.4: [197b:2384] type 00 class 0x088000
[ 0.148466] pci 0000:02:00.4: reg 0x10: [mem 0xf2300c00-0xf2300cff]
[ 0.156695] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.156703] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.156802] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.156907] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.157034] pci 0000:05:00.0: [10ec:8172] type 00 class 0x028000
[ 0.157059] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.157076] pci 0000:05:00.0: reg 0x14: [mem 0xf2200000-0xf2203fff]
[ 0.157243] pci 0000:05:00.0: supports D1 D2
[ 0.157245] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.157285] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.166686] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.166691] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.166697] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.166813] acpiphp: Slot [1] registered
[ 0.166820] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.166826] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.166831] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.166839] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.167015] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[ 0.167081] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.167195] pci 0000:08:00.0: reg 0x18: [mem 0xf2010000-0xf2010fff 64bit pref]
[ 0.167267] pci 0000:08:00.0: reg 0x20: [mem 0xf2000000-0xf200ffff 64bit pref]
[ 0.167309] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.167631] pci 0000:08:00.0: supports D1 D2
[ 0.167633] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167765] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.167881] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.167886] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.167897] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.168016] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.168030] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.168033] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.168036] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.168038] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.168041] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.168043] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.168045] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.168116] pci_bus 0000:00: on NUMA node 0
[ 0.168358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168428] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.168494] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168563] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.168695] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168761] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168827] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.173479] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.173591] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173669] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173669] vgaarb: loaded
[ 0.173669] vgaarb: bridge control possible 0000:00:02.0
[ 0.173669] PCI: Using ACPI for IRQ routing
[ 0.185061] PCI: pci_cache_line_size set to 64 bytes
[ 0.185173] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.185176] e820: reserve RAM buffer [mem 0x376b1000-0x37ffffff]
[ 0.185179] e820: reserve RAM buffer [mem 0x377ba000-0x37ffffff]
[ 0.185182] e820: reserve RAM buffer [mem 0x37908000-0x37ffffff]
[ 0.185184] e820: reserve RAM buffer [mem 0x37b18000-0x37ffffff]
[ 0.185187] e820: reserve RAM buffer [mem 0x37b63000-0x37ffffff]
[ 0.185189] e820: reserve RAM buffer [mem 0x37be0000-0x37ffffff]
[ 0.185191] e820: reserve RAM buffer [mem 0x37c00000-0x37ffffff]
[ 0.185330] NetLabel: Initializing
[ 0.185332] NetLabel: domain hash size = 128
[ 0.185334] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185348] NetLabel: unlabeled traffic allowed by default
[ 0.185378] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.185385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.185390] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.186692] Switched to clocksource hpet
[ 0.194447] pnp: PnP ACPI init
[ 0.194476] ACPI: bus type PNP registered
[ 0.194565] pnp 00:00: [dma 4]
[ 0.194604] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.194647] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.194818] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.194823] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.194877] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.194964] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.194967] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.194970] system 00:04: [io 0xffff] has been reserved
[ 0.194972] system 00:04: [io 0xffff] has been reserved
[ 0.194975] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.194978] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.194981] system 00:04: [io 0x1600-0x16fe] has been reserved
[ 0.194983] system 00:04: [io 0xfe00] has been reserved
[ 0.194986] system 00:04: [io 0x0700-0x070f] has been reserved
[ 0.194990] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195039] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195106] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.195153] pnp 00:07: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[ 0.195390] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.195393] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.195396] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.195399] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.195402] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.195405] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.195407] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.195411] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195901] pnp: PnP ACPI: found 9 devices
[ 0.195903] ACPI: bus type PNP unregistered
[ 0.233524] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.233530] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.233542] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.233546] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.233549] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.233561] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.233564] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.233567] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.233579] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.233599] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 08] add_size 400000
[ 0.233618] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233621] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233624] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233627] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233630] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233632] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233635] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.233638] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233641] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233643] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233651] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233656] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
[ 0.233660] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233664] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
[ 0.233668] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233672] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233676] pci 0000:00:1c.5: BAR 14: assigned [mem 0x40c00000-0x410fffff]
[ 0.233680] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.233683] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.233687] pci 0000:00:1c.2: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.233691] pci 0000:00:1f.3: BAR 0: assigned [mem 0x41100000-0x411000ff 64bit]
[ 0.233705] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.233709] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.233716] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.233721] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233729] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.233732] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.233739] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
[ 0.233744] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233752] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.233756] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.233763] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff]
[ 0.233768] pci 0000:00:1c.2: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233776] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.233779] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.233786] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.233791] pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233799] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.233803] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.233809] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.233814] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233823] pci 0000:08:00.0: BAR 6: assigned [mem 0xf2020000-0xf203ffff pref]
[ 0.233826] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.233830] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.233836] pci 0000:00:1c.5: bridge window [mem 0x40c00000-0x410fffff]
[ 0.233841] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233849] pci 0000:00:1e.0: PCI bridge to [bus 09]
[ 0.233864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.233867] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.233870] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233872] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233874] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233877] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233879] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233882] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.233884] pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf23fffff]
[ 0.233887] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233890] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.233892] pci_bus 0000:03: resource 1 [mem 0x40200000-0x403fffff]
[ 0.233895] pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233897] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.233900] pci_bus 0000:04: resource 1 [mem 0x40600000-0x407fffff]
[ 0.233902] pci_bus 0000:04: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233905] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.233907] pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.233910] pci_bus 0000:05: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233912] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.233915] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.233917] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233920] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.233922] pci_bus 0000:08: resource 1 [mem 0x40c00000-0x410fffff]
[ 0.233924] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233927] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.233929] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.233932] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233934] pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233937] pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233939] pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233941] pci_bus 0000:09: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233974] NET: Registered protocol family 2
[ 0.234147] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.234165] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234196] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.234229] TCP: reno registered
[ 0.234232] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234288] NET: Registered protocol family 1
[ 0.234306] pci 0000:00:02.0: Boot video device
[ 0.247385] PCI: CLS 64 bytes, default 64
[ 0.247444] Unpacking initramfs...
[ 0.327321] Freeing initrd memory: 3316K (f6ac0000 - f6dfd000)
[ 0.327360] Simple Boot Flag at 0x36 set to 0x1
[ 0.327537] apm: BIOS not found.
[ 0.327589] Scanning for low memory corruption every 60 seconds
[ 0.328006] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342512] bounce pool size: 64 pages
[ 0.342526] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344771] zbud: loaded
[ 0.344889] VFS: Disk quotas dquot_6.5.2
[ 0.344943] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.345132] msgmni has been set to 1740
[ 0.345203] Key type big_key registered
[ 0.345390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.345431] io scheduler noop registered
[ 0.345433] io scheduler deadline registered
[ 0.345477] io scheduler cfq registered (default)
[ 0.345722] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.345914] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.346095] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.346276] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.346459] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.346643] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.346801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.346826] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.346866] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.346868] vesafb: scrolling: redraw
[ 0.346870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.347265] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.371347] Console: switching to colour frame buffer device 128x48
[ 0.395282] fb0: VESA VGA frame buffer device
[ 0.395302] intel_idle: does not run on family 6 model 23
[ 0.395336] GHES: HEST is not enabled!
[ 0.395353] isapnp: Scanning for PnP cards...
[ 0.708652] isapnp: No Plug & Play device found
[ 0.708714] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.709479] rtc_cmos 00:05: RTC can wake from S4
[ 0.709659] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.709696] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.709734] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.709873] TCP: cubic registered
[ 0.710038] NET: Registered protocol family 10
[ 0.710291] NET: Registered protocol family 17
[ 0.710470] Using IPI No-Shortcut mode
[ 0.710614] registered taskstats version 1
[ 0.711361] Magic number: 6:207:248
[ 0.711441] rtc_cmos 00:05: setting system clock to 2014-07-24 21:12:51 UTC (1406236371)
[ 0.711573] PM: Hibernation image not present or could not be loaded.
[ 0.711816] Freeing unused kernel memory: 564K (c1616000 - c16a3000)
[ 0.711835] Write protecting the kernel text: 4452k
[ 0.711865] Write protecting the kernel read-only data: 1292k
[ 0.720349] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.722097] systemd-udevd[47]: starting version 215
[ 0.747046] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.754102] ACPI: bus type USB registered
[ 0.754142] usbcore: registered new interface driver usbfs
[ 0.754158] usbcore: registered new interface driver hub
[ 0.757660] usbcore: registered new device driver usb
[ 0.757853] sdhci: Secure Digital Host Controller Interface driver
[ 0.757856] sdhci: Copyright(c) Pierre Ossman
[ 0.758255] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 20)
[ 0.758310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.758388] mmc0: no vqmmc regulator found
[ 0.758390] mmc0: no vmmc regulator found
[ 0.758524] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.758563] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 20)
[ 0.758628] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 0.758728] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.758864] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.758874] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.758884] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.758909] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.759248] ehci-pci: EHCI PCI platform driver
[ 0.760108] hub 1-0:1.0: USB hub found
[ 0.760122] hub 1-0:1.0: 2 ports detected
[ 0.760528] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.760536] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 0.760554] ehci-pci 0000:00:1a.7: debug port 1
[ 0.760989] i8042: Detected active multiplexing controller, rev 1.1
[ 0.764322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.764375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.764416] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.764455] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.764469] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.764487] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf2a04000
[ 0.764496] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.769729] SCSI subsystem initialized
[ 0.771540] libata version 3.00 loaded.
[ 0.773372] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.773646] hub 2-0:1.0: USB hub found
[ 0.773657] hub 2-0:1.0: 6 ports detected
[ 0.796797] hub 1-0:1.0: USB hub found
[ 0.796811] hub 1-0:1.0: 2 ports detected
[ 0.797077] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.797086] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.797104] ehci-pci 0000:00:1d.7: debug port 1
[ 0.801001] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.801026] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2a04400
[ 0.810017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.810266] hub 3-0:1.0: USB hub found
[ 0.810277] hub 3-0:1.0: 6 ports detected
[ 0.810637] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.810645] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.810654] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.810690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.810912] hub 4-0:1.0: USB hub found
[ 0.810922] hub 4-0:1.0: 2 ports detected
[ 0.811160] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.811169] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.811178] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.811202] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 0.811580] hub 5-0:1.0: USB hub found
[ 0.811590] hub 5-0:1.0: 2 ports detected
[ 0.811840] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.811847] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.811857] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.811879] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.812130] hub 6-0:1.0: USB hub found
[ 0.812140] hub 6-0:1.0: 2 ports detected
[ 0.812412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.812422] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.812431] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.812458] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.812718] hub 7-0:1.0: USB hub found
[ 0.812728] hub 7-0:1.0: 2 ports detected
[ 0.813015] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.813023] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.813033] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.813072] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.813371] hub 8-0:1.0: USB hub found
[ 0.813381] hub 8-0:1.0: 2 ports detected
[ 0.813569] ata_piix 0000:00:1f.2: version 2.13
[ 0.813680] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.816969] scsi0 : ata_piix
[ 0.817145] scsi1 : ata_piix
[ 0.817232] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 0.817238] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 0.842971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.116709] usb 3-6: new high-speed USB device number 2 using ehci-pci
[ 1.290069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.290196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.297007] ata2.00: ATAPI: MATSHITADVD-RAM UJ8A0A, SB31, max UDMA/100
[ 1.297157] ata1.00: ATA-8: WDC WD2500BEVT-08A23T1, 02.01A02, max UDMA/133
[ 1.297160] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.310274] ata2.00: configured for UDMA/100
[ 1.310518] ata1.00: configured for UDMA/133
[ 1.310653] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 02.0 PQ: 0 ANSI: 5
[ 1.314042] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A0A SB31 PQ: 0 ANSI: 5
[ 1.330035] tsc: Refined TSC clocksource calibration: 2094.749 MHz
[ 1.330632] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.330736] sd 0:0:0:0: [sda] Write Protect is off
[ 1.330740] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.330778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.339509] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.339512] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.339697] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.410766] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.411402] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.330087] Switched to clocksource tsc
[ 2.977672] random: nonblocking pool is initialized
[ 4.813882] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.660514] systemd[1]: systemd 215 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 5.660690] systemd[1]: Detected architecture 'x86'.
[ 5.713519] systemd[1]: Set hostname to <Thinkpad-SL510>.
[ 7.304701] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.304780] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.304796] systemd[1]: Starting Remote File Systems.
[ 7.305131] systemd[1]: Reached target Remote File Systems.
[ 7.305165] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.305725] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.305745] systemd[1]: Starting Encrypted Volumes.
[ 7.306028] systemd[1]: Reached target Encrypted Volumes.
[ 7.306050] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.306094] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.306107] systemd[1]: Starting Paths.
[ 7.306343] systemd[1]: Reached target Paths.
[ 7.306360] systemd[1]: Expecting device dev-disk-by\x2duuid-0da676d3\x2de00d\x2d4408\x2da0e4\x2d61af4ccfed22.device...
[ 7.306889] systemd[1]: Expecting device dev-disk-by\x2duuid-37e41bc7\x2daf4c\x2d4c7f\x2d97ff\x2decc785cc6263.device...
[ 7.307389] systemd[1]: Expecting device dev-disk-by\x2duuid-6692aca0\x2d5948\x2d4835\x2dadb5\x2d51941a76128f.device...
[ 7.307887] systemd[1]: Expecting device dev-disk-by\x2duuid-8829a0cf\x2da620\x2d438d\x2d8d1a\x2de386af97280f.device...
[ 7.308384] systemd[1]: Starting Root Slice.
[ 7.315232] systemd[1]: Created slice Root Slice.
[ 7.315253] systemd[1]: Starting User and Session Slice.
[ 7.315767] systemd[1]: Created slice User and Session Slice.
[ 7.315784] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.316114] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.316130] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.316519] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.316536] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.316926] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.316943] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.317282] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.317297] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.317631] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.317651] systemd[1]: Starting udev Kernel Socket.
[ 7.317945] systemd[1]: Listening on udev Kernel Socket.
[ 7.317963] systemd[1]: Starting udev Control Socket.
[ 7.318263] systemd[1]: Listening on udev Control Socket.
[ 7.318284] systemd[1]: Starting Journal Socket.
[ 7.318577] systemd[1]: Listening on Journal Socket.
[ 7.318611] systemd[1]: Starting System Slice.
[ 7.319093] systemd[1]: Created slice System Slice.
[ 7.319121] systemd[1]: Started File System Check on Root Device.
[ 7.319134] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 7.319690] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.346175] systemd[1]: Mounting Temporary Directory...
[ 7.355475] systemd[1]: Starting system-getty.slice.
[ 7.356130] systemd[1]: Created slice system-getty.slice.
[ 7.405020] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.405060] systemd[1]: Starting Setup Virtual Console...
[ 7.434270] systemd[1]: Starting Load Kernel Modules...
[ 7.435152] systemd[1]: Mounting Huge Pages File System...
[ 7.450675] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.451757] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.452682] systemd[1]: Mounting Debug File System...
[ 7.453572] systemd[1]: Starting udev Coldplug all Devices...
[ 7.454542] systemd[1]: Starting Journal Service...
[ 7.455770] systemd[1]: Started Journal Service.
[ 8.017658] vboxdrv: Found 2 processor cores.
[ 8.017849] vboxdrv: fAsync=0 offMin=0x19a offMax=0x113a
[ 8.017936] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.017938] vboxdrv: Successfully loaded version 4.3.12_OSE (interface 0x001a0007).
[ 8.066565] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.453787] systemd-udevd[137]: starting version 215
[ 9.297221] Monitor-Mwait will be used to enter C-1 state
[ 9.297230] Monitor-Mwait will be used to enter C-2 state
[ 9.297235] tsc: Marking TSC unstable due to TSC halts in idle
[ 9.297251] ACPI: acpi_idle registered with cpuidle
[ 9.297798] Switched to clocksource hpet
[ 9.397577] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 9.398331] ACPI: Lid Switch [LID]
[ 9.398442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 9.398448] ACPI: Power Button [PWRB]
[ 9.398520] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 9.398523] ACPI: Sleep Button [SLPB]
[ 9.398594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 9.398597] ACPI: Power Button [PWRF]
[ 9.714253] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.714258] ACPI: Thermal Zone [TZ00] (38 C)
[ 9.788226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.107244] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.107258] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.107608] r8169 0000:08:00.0: irq 46 for MSI/MSI-X
[ 10.107894] r8169 0000:08:00.0 eth0: RTL8102e at 0xf8e0e000, 60:eb:69:df:fc:5b, XID 04c00000 IRQ 46
[ 10.138235] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.151012] Linux agpgart interface v0.103
[ 10.156788] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.156794] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.156797] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 10.156799] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.156801] sound hdaudioC0D0: inputs:
[ 10.156804] sound hdaudioC0D0: Mic=0x18
[ 10.156807] sound hdaudioC0D0: Internal Mic=0x12
[ 10.187737] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140214/utaddress-258)
[ 10.187746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187751] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187757] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187760] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187762] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.200980] ACPI: Battery Slot [BAT1] (battery present)
[ 10.307840] [drm] Initialized drm 1.1.0 20060810
[ 10.331834] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 10.332165] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.332219] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.332274] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.346048] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 10.346167] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.346796] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 10.346977] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.403254] ACPI Warning: SystemIO range 0x00001c00-0x00001c1f conflicts with OpRegion 0x00001c00-0x00001c0f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 10.403262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.407145] ACPI: AC Adapter [ACAD] (on-line)
[ 10.407653] wmi: Mapper loaded
[ 10.462739] Non-volatile memory driver v1.3
[ 10.483086] cfg80211: Calling CRDA to update world regulatory domain
[ 10.511461] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 10.511465] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 10.511467] thinkpad_acpi: ThinkPad BIOS 6JET85WW (1.43 ), EC 6JHT66WW-1.186000
[ 10.511469] thinkpad_acpi: Lenovo ThinkPad SL510, model 2847A65
[ 10.513121] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 10.517198] thinkpad_acpi: radio switch found; radios are enabled
[ 10.517210] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 10.517319] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 10.517321] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 10.518287] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x008c7fff
[ 10.617843] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 10.617954] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 10.640485] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
[ 10.717742] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[ 10.928161] media: Linux media interface: v0.10
[ 11.006082] iTCO_vendor_support: vendor-support=0
[ 11.008425] Linux video capture interface: v2.00
[ 11.015257] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.015302] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 11.015485] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.050172] systemd-udevd[146]: renamed network interface eth0 to enp8s0
[ 11.084784] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[ 11.084877] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 11.401469] [drm] Memory usable by graphics device = 2048M
[ 11.401476] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 11.401478] fb: switching to inteldrmfb from VESA VGA
[ 11.401504] Console: switching to colour dummy device 80x25
[ 11.423441] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 11.423454] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.423456] [drm] Driver supports precise vblank timestamp query.
[ 11.423531] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.474103] rtl8192se: FW Power Save off (module option)
[ 11.474191] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
[ 11.539577] fbcon: inteldrmfb (fb0) is primary device
[ 11.568063] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[ 11.568068] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 11.625453] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
[ 11.649292] mousedev: PS/2 mouse device common for all mice
[ 11.819295] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:481c)
[ 11.832647] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.7/usb3/3-6/3-6:1.0/input/input19
[ 11.832785] usbcore: registered new interface driver uvcvideo
[ 11.832786] USB Video Class driver (1.1.1)
[ 11.900636] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 11.912613] systemd-udevd[144]: renamed network interface wlan0 to wlp5s0
[ 12.173403] Console: switching to colour frame buffer device 170x48
[ 12.178613] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.178615] i915 0000:00:02.0: registered panic notifier
[ 12.191803] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.193501] acpi device:06: registered as cooling_device2
[ 12.193604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20
[ 12.193997] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.246859] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 13.644561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.954050] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.071585] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.166537] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 16.054096] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 16.358428] psmouse serio5: hgpk: ID: 10 00 64
[ 18.270058] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 18.588710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input18
[ 20.986088] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 20.997921] r8169 0000:08:00.0 enp8s0: link down
[ 20.997967] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 23.204726] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.231917] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.233796] wlp5s0: authenticated
[ 23.237347] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.241118] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.242837] wlp5s0: associated
[ 23.242852] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 23.407416] wlp5s0: deauthenticating from 8c:21:0a:77:4c:32 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 23.443391] cfg80211: Calling CRDA for country: US
[ 23.443467] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.463399] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.465298] wlp5s0: authenticated
[ 23.466930] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.471099] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.472786] wlp5s0: associated
[ 391.317544] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 495.430421] perf interrupt took too long (2517 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[ 526.290766] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 646.953268] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 767.198414] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
Last edited by jazzi (2014-07-31 12:22:09)jazzi wrote:Sometimes the computer will freeze when booting into start virtual console.
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
You have to give us a hint.
What is your processor?
How much RAM have you?
What is your video card/ship set?
What kernel are you running?
I spotted this in your dump:
[drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
In this case, drm means Direct Rendering Management and has to do with your Video subsystem. An interrupt is where the hardware sends a signal to the processor that something has happened that requires the urgent attention of the processor. The kernel is protesting that the hardware is barraging it with interrupt requests.
Maybe you are looking for
-
How can I use a U.S. iTunes gift card with Cdn registration?
System does not recognize U.S. code on gift card on the Canadian site and I do not know how to cancel my Canadian registration so that I can set up a U.S. registration. I have addresses in both countries so it appears I should be able to register and
-
It’s now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5. I recently updated to ios 5.1 but nothing has been done to rectify the audio app problems ie lyric
-
Flash not going entirely fullscreen. Space at bottom and top
I am running Arch 64bit and I noticed that whenever I go fullscreen on a flash video, I have a space around the video and it does not go completely fullscreen. I experiencing this on the current firefox in pacman. I have flash version: bash-3.2$ pac
-
DTW - Problems trying to update prices
Hi, We've recently created a new database for another company that we own and have started importing items from our current SAP database using the DTW. I've managed to get all the stock copied across and now need to get prices into the new database.
-
[svn:fx-trunk] 7862: GraphicElement PARB Changes
Revision: 7862 Author: [email protected] Date: 2009-06-15 15:06:23 -0700 (Mon, 15 Jun 2009) Log Message: GraphicElement PARB Changes mx.core.AdvancedLayoutFeatures ?\226?\128?\162 Rename layer -> depth ?\226?\128?\162 Rename offsets -> p