Weird Syncing Issue

Hey everyone -
this is my first post and I did quite a bit of searching before posting.
Here is my issue:
Every now and again, I will plug my iPhone up to my computer and something weird happens. The phone shows in the window, but all my music, playlists, movies and ringtones are gone from the screens. However, everything is still on my phone when I unplug it. The little capacity meter at the bottom is all Orange (for "other") and it is not breaking down by data count.
This is VERY annoying!! Can anyone help or direct me to a solution?
Thanks in advance.

I connect to a hub that is part of my monitor. Should I connect straight to the CPU instead?
Yes.
When music, video, or photos is categorized as "Other", this indicates there is some corruption which is usually caused by a bad connection, or an interruption during the data transfer/sync process. Using a hub can cause this.
I am not following up about the restore. I thought a restore returned it to original settings.
A Restore returns the iPhone to factory settings. It completely erases the iPhone's flash drive first, and then re-installed the current firmware version. Afterwards, syncing is required to restore iTunes content, address book contents, and calendar events to your iPhone. Restoring from your iPhone's backup will restore all current settings - which is why you should sync immediately before restoring to update your iPhone's backup if needed.
A Restore is the only way to resolve the "Other" issue.

Similar Messages

  • Weird Syncing issue!  Need Help!!!

    Hi,
    I have a 2007 iMac. I Run Lion. I have iCloud.  Everything works great except for syncing.  My system auto matically syncs my email and other things every hour. When I first installed MobileMe I had an web mail account with Yahoo, which I have since closed.  Now, everytime my system syncs, it pops up with a dialog box on my screen and wants me to type in the password to that account.  The account no longer exists, and I have long since forgotten its password. This problem is starting affect my system stability by causing certain programs to hang or crash. I have bee through ALL my visible settings, and can find no way to fix this on my own.  Can't call Apple or they will charge me $49.00!  Any help you folks can give will be appreciated!

    Try opening Keychain Assistant, unlock your keychain and search for entries related to this Yahoo account and delete them.
    Also open Address Book and see if you have enabled syncing with Yahoo in the preferences. If so, turn it off.

  • I'm having weird syncing issues with iPod.

    I just played a song using my iPod, then synced my iPod. When I looked at my "Recently Played" smart playlist, it said I just played an entirely different song. What's up with that?

    You can only pair your iPhone 4s to the computer for tethering, you can't sync with it. Are you trying to pair your 7th gen to play music through the MBP speakers?

  • Extreme charging and syncing issues

    Okay, so for the past few weeks I've been developing charging and syncing issues. The first third party usb cable worked for a while and after some point it begin to physically wear and tear, and wires were disconnecting. Needed a new charger, so naturally I went and got another one. However, it didn't work, and as a measure to see if it was faulty, I plugged in the old one and smelt smoke/a burn smell.
    So, I plugged the new charger into an old ipod touch 2G and it charges and syncs just dandy. The 3GS is a particularly weird case here; as it will not charge while on. After letting it die, I plugged it in and got an empty battery indicator with a charging (lightning) symbol, and after a couple of minutes it powered back on, but still wasn't charging once ios actually booted up. Weird, right? If I could connect to windows I could restore it to remove the jailbreak, as using Erase All Content and Settings keeps the phone in an endless loop until I hard reset.
    The kicker here is that it seems to only charge when it's off, as if its plugged in and you slide to power off, and turn it back on later, it will sometimes have a higher percentage. And, at the place I work, we have many iPads so I plugged it up to the iPad chargers and it worked with some of them, albeit slower then expected.
    Is my phone not getting enough voltage or something of the nature? I have 3 wall adaptors, one apple, and two of them standard LG adaptors, and a third party usb cable that notably works for the iPod just fine. I've connected it to 3 different computers with itunes and the result was the same as if it was dead and plugged into the wall; enough power to boot to home screen then die afterwards.
    The thing that get's me is when I hit Erase All Content and Settings and it's plugged, it makes a charging noise indication but only when I hit that reset button. If it wasn't for that, I would beleive it was a hardware issue. That, or I'm just trying to deny the phone's inevitable fate. I needed a reason to switch to the 4s, so maybe this is it. I don't like giving on on something without fixing it though so it's gonna bother me until I do.
    Thanks for any suggestions or help!

    halp

  • So frustrating that nobody knows why. Audio Sync issue.

    I have an imovie project of old family footage that was ported over from VHS through a sony dcr pc120e mini dv cam straight through to intel imac via firewire. The imovie project is flawless and the sound is perfectly in sync. ive exported to idvd and when finished the audio is out of sync on the final disk. Now i have been reading about this issue and see that people blame idvd8 but it happens when i make a dvd with my imovie project using toast titanium 9 too. Surely if it plays perfectly as an imovie project there must be a way of transferring to dvd without audio sync issues. If anyone knows a solution or piece of software that will remedy this please please let me know as i have wasted about 12 dvds in various experiments.

    mogreen wrote:
    camcorder on 16bit, i am using a vhs player attacthed to camera then firewire to imac, ... the imovie project is perfect in everyway. Everything is pal. Yes i did export to QT within IM and this was also out of sync.
    thanks for answering some of my Qs ...
    there's one thing, I do suspect, which was a 'source' for sync-weirdness for years.. which is the AUDIO connected to some video.
    you told us, video is 25fps, and audio is included 16bit (which is good...)
    I assume, adding some NON-conform audio could cause trouble... (as a 12bit audio would cause outofsynciness) .. we do know very little about, how iM08 handles audio+video internally, we 'Silverbacks' had long discussions about really weird side effects as a 'zooming' of dvfiles on export etc. I wouldn't be surprised, if adding some non-iTS, non-48kHz-aiff, non-whatever... causes such an effect.
    so, please answer my audio Q from above: source, format, bitrate...?
    and just for curiosity: how long is your project in total? hh:min:sec?
    ==edit==
    pops into mind: in iM vers3, there was some 'bug', concerning PAL wrong audio and NTSC good audio ... wow < scratching bald head > .. try to contact some wiseguy with better memory..
    Message was edited by: Karsten Schlüter

  • Canon cameras have audio sync issue with FCP?

    My mini dv deck died on me so,
    I am using a small palm size Canon mini dv firewire camera to transfer about 50 tapes.
    I am having a weird audio sync issue.
    Sometimes the capture footage plays down in sync - I pause>scroll>play - and it's suddenly out of sync. This keeps happening. Sometimes it plays in sync. Other times it does not.
    Because it's hit and miss- I'm not sure I can even re-sync.
    I imagine it could be the media drive (internal)- but I have other video files on this drive that play fine.
    I don't often use firewire capture.
    Is audio sync a common firewire issue?
    Will the quality suffer if I capture through composite/analog audio outputs?
    I can patch it through my
    decklink card.

    Audio sync is an issue with Firewire, just not all the time. Usually it is fine, but a lot of Avid people don't like Firewire for this reason.
    Most often it is a 5 frame sync issue. Slip your audio 5 frames forward and see if that solves the problem.
    As well, take a look in your Browser after you capture a clip and see if the Aud Rate is either 48,000.5 Hz or 47,999 Hz. I have seen the clips come in as both of these. Once you slip the footage, export the audio only, then reimport and attach the audio to the clip in the timeline. Should take care of it.
    Post back if these don't work.

  • FCP audio sync issue, attempts at fix result in dodgy files - help!

    Hello,
    I have some Sony EX1 footage here in which 20 out of 500 QT files FCP will play the audio out of sync by either 14 or 19 frames (picture lags) - when shooting no changes were made to settings which were as follows:
    1080/25P HQ 16-bit 48Khz
    weird thing #1: only FCP will exhibit the out of sync problem, QT or even quickview in the OS X finder will play them back fine ...
    weird thing #2: once I export the footage without re-syncing it it will then play fine again in QT/finder and will sync fine in FCP - yay! - no... it will beach ball and/or lag/crash FCP/QT/finder once I attempt any sort of movement/scrubbing in any of the timelines
    attempting to work with the original un-synced footage and unlinking the audio (and correctly syncing it) as a workaround has failed as whenever I put on any video effect/transition or whatever the effected part will sync correctly and my smarty pants re-sync therefore makes it out of sync again ! arrrrgh!
    Basically, anytime I effect or export it the sync issue goes away, but I am left with crashy/corrupted files ...
    Any suggestions ?

    hillr wrote:
    the audio clip is the same length as the video clip. it is not a matter of moving the audio over to sync it up. the audio falls behind by the time it gets to the end. it is just fine at the start of the video and out of sync at the end. If I would sync up the end then the front will be out of sync. All I did is capture the footage from my deck to FCP and then placed it in the time line.
    Russell
    This is not correct but it's easy to arrive at that conclusion. The two clips aree not the same length by your definition: *the audio falls behind by the time it gets to the end*
    Mark the place where the audio ends, mark the place where the video ends. They are different and that difference is a simple matter of subtracting one timecode location form the other. This means the audio was shot at a different sampling rate than that with which it was captured. I do not know anything about the DSR400 camera or your deck, my Sonys are different, but you should be able to ascertain the sampling rate of the audio by checking the data display. If, indeed, it's 48k, you have sent the audio to a separate folder than the video and your disk cannot keep up. But that sync difference is not absolute so it's going to be different each time you play it back.
    bogiesan

  • More Aperture/iPad syncing issues

    Each time I create a new project or album in Aperture, I have trouble getting the images to the iPad when I sync. I sometimes need to sync several times until the images are recognized and imported to iPad. I do have the albums designated manually, rather than all, which means I have to sync and then sync again after I check the checkbox for the new album. I understand that, but sometimes I have to go back into Aperture to make sure the previews are updated. If I choose to update the previews for a project, Aperture will usually tell me that they're already up to date, but often they will not show up on the iPad, even after I check the appropriate box for the album in iTunes. Sometimes I get good results if I delete the previews and regenerate them in Aperture.
    The second problem is the sort order. Even if I have "sort by filename" selected in Aperture, they do not show up in this order on the iPad--despite what the support article says about this. They appear to only show up in Date order. I've tried repeatedly resetting the sort order, but it does not change on the iPad. Sometimes I have to delete the album from the iPad, (uncheck the album in iTunes and sync again), then recheck it and sync yet another time. This does not always work, however.
    It is very frustrating. The interface between Aperture and the iPad is very wonky. I often have to sync repeatedly, just to get the photos on the iPad and even then they're usually in the wrong order.
    Aperture appears to have two types of previews: "previews" and "sharing previews," but "sharing previews" don't seem to appear in the documentation. I've noticed that, even when Aperture says the previews are up to date, when I exit the program, it will sometimes (but, maddeningly, not always), give the message, "updating sharing previews" before quitting. I cannot figure out how to force this, however. Sometimes opening and closing Aperture several times will cause it to do this, but I can't be sure.
    iTunes seems to have its own process in which it "optimizes" images for importing to the iPad. Like Aperture's mysterious "sharing previews," "optimizing" does not show up in the iTunes documentation or help files.
    This process either needs to be improved, or at least documented so users can understand how to avoid these problems.

    1. Some people have reported slow syncing with anything but the iPad's own USB cable (e.g. using a US cable from an iPhone/iPod). Try different cables
    2. More work - disable iTunes syncing completely, then re-enable a bit at a time, e.g. one movie at a time, one playlist at a time, one photo album at a time. There are periodic reports of syncing issues caused by a bit of media that's been corrupted, and this (tedious) approach allows you to identify where the problem might be.
    3. If that fails, do a clean restore back to factory settings, then progressively re-enable syncing as above.
    Hope this helps

  • Sync issues after iOS 8 update

    Hi,
    I have an iPhone 5S, 64 GB. After updating to iOS8 I got sync issues. "Waiting for changes to be applied" never disappeared. Also the storage usage in iTunes 11.4 is wrong. iTunes said I had 6GB free, when I had in fact 20GB. I restored the phone back to firmware, restored the backup. All was fine until I made setting changes in iTunes what I want to sync. The same issue in iTunes is back again. I already deleted my voice memos as someone recommended in another threat but that didn't help.
    Any ideas how I can solve the problem, would be appreciated. Thank you!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Disappearing Contacts, Mobile Me Sync Issues, Calendar crash-Answers??

    I'll try to keep this post brief but hopefully it will help provide some possible answers for frustrated users experiencing the random complete wipe out of all contacts and calendar data when syncing with mobile me using either push or fetch. After several weeks of experiencing these random sync issues and spending several hours over several days between tech support calls with iPhone then Mobile Me support and then finally a genius bar appointment where the genius said he didn't have a clue and simply offered to replace my phone.
    The next morning, SAME PROBLEMS... and through it all NO ONE could tell me why my sync was so randomly unreliable. Every other day for no apparent reason, my phone would suddenly lose all contacts and/or calendar data. (A few thousand contacts and two years of calendar data). It was both frustrating and strange—even stranger that Apple techs had no clue why and seemed to think no one else was having this issue.
    I tried everything - complete restores, resets, deleting and re-adding the mobileme account, etc., etc., etc. One tech support person finally said, "good luck..." The others kept handing me off the higher levels of support... until finally they just said "we don't know why this is happening." I was waiting for someone to just say, "Look, we have issues with mobile me, so hang in there and eventually it will work." I can be patient and I still think the iphone is the greatest invention in recent years. But everybody I talked with at Apple seemed to think this should be working flawlessly.
    I also started having a crash on the calendar anytime I tried to see the list view for "all calendars." This was frustrating because that's the best feature of the calendar app!
    I was prepared to just return to syncing with my computer and wait for the software to improve between the phone and mobile me. Finally, last night I tried a few things that seem to be working... and for the first full day, mobile me is actually useful to me today. (my fingers are crossed!)
    Here's what I did.
    1. I minimized the number of calendars I was syncing - I have no idea if this affected the sync, but I was syncing eight calendars, now I'm down to four. (You can easily export a calendar and import those events back into a different calendar.)
    2. I did a complete restore of the phone (not from a back up) and the VERY FIRST THING, I added mobile me and synced only the calendar (set to push.) This cleared up the random calendar crash in list view and also mobile me was pushing data rather reliably. After a few moments my entire calendar was on the phone and worked perfectly. New events were transferred quickly back and forth.
    3. I then chose to sync my contacts through the computer rather than over the air. I fear that the contact sync was somehow messing up the whole communication process between the phone and the cloud. Someone suggested that the number of "groups" in contacts might have an impact on the sync issues as well. I didn't need my contacts to sync with the urgency of "push" so this works for me. Plus I have a lot of contacts and it's just faster over the cable.
    4. I then GREATLY reduced the number of apps on my phone. I originally had about 27 and I only reinstalled 9 of them. I did this ONE AT A TIME - starting with the most necessary and useful... and after each install, I checked the functionality of the calendar and mobile me. No problems. Perhaps I was having an app conflict?
    5. Then I reinstalled the rest of my content - music, podcasts, photos. Still no problems.
    ONE of these steps actually worked, and I'm not sure which one. My guess is that one or more of my apps was conflicting in some way. OR possibly something with the contact sync... but for the last 24 hours the mobile me calendar sync using push has been consistently reliable and useful. (for the record, mobile me email has always worked perfectly for me.)
    No one with tech support ever suggested to me that I could be having an application conflict or any other problems with calendars or contact groups, etc. I've spent many hours on this the past few weeks... and for the first time, my iphone seems to be working with mobile me correctly.
    In reading many of these posts, it seems a lot of others are having similar problems... so hopefully these suggestions might be helpful. If you have any thoughts as to which of these solutions was the correct one, I would be interested in hearing your opinion.
    Thanks!

    Are your Address Book contacts and iCal calendars/calendar events on your Mac synced with your MobileMe online address book and calendar?
    When you say this data is not synced with your iPhone, none of your MobileMe online data is transferred to your iPhone, or after the initial transfer of this data to your iPhone when you first turned contacts and calendars for over the air syncing with your MobileMe account on your iPhone, the data is not kept synchronized with the MobileMe "cloud"?

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • Weird Playback Issue...

    I have this weird playback issue with iTunes for Windows. I am using Vista and I think the cause of the problem is that I am using MacDrive to access my OS X partition. But anyways, on with the problem. So the problem is that when I play a song, the song will play for like 5 seconds and then it will just go the next song. This song will do the same thing, and so-on and so-forth. Then, during this time, my Mac formatted hard drive is unavailable while iTunes is running. In "My Computer" the drive is there, but when I try to open it, Explorer freezes. Then, when I exit iTunes, it doesn't really exit. It still shows up in the task manager and when I try to end the process, it just plain doesn't end. I have to restart my computer to gain full use of it again. After the restart I can access my Mac disks, but once I start iTunes and try to play a song, I get the same thing again. And in case thats not weird enough, I can play the MP3's in WMP fine, and they will also play in iTunes fine if I actually open them, rather than just select them from my library. If I go to file open and select a song on my Mac drive, it will play fine, but then once I try to play a song from my library, I get caught in that vicious cycle. Anyone else had this problem or anything? Thanks. Also, is there an alternative program to Mac Drive that will allow me to read HFS partitions?

    Post more about your situation... what format is the video, and where are you storing the video files? i.e., on a disk other than your startup disk? The adobe install is likely not the problem... I run adobe software along side FCS on about 75 workstations, and don't see issues like you describe.
    Wavy? not accurate? what are you talking about?
    Jerry

  • Having sync issues with Outlook 2011 since upgrading to Mavericks

    Hi All,
    My work Macbook Pro 13" is having issues syncing my inbox and sent mail automatically. It's a hit or miss if I recieve emails in my inbox in a timely mannor with out pressing the Send/Recive button (even when i press it takes minutes to update). My Sent Items can show up an hour later  even if I hit the Send/Recieve button.
    All my mail is there and shows up/syncs on my iPhone quickly. I upgraded to Mavericks right when it came out and have only been having these sync issues for the last week or so.
    I've cleared my mail cache and that didn't work. My calandar reminders and contacts don't seem to have any issues and no other apps have been preforming slow or strangely.... just my VERY important work email. My tech guys are stumped and I wanted to try you guys before they do a major rehaul of my system 
    Thanks!

    A new Outlook Identity will most likely solve your issues. If you have any data under "On My Computer" folders, see this link:
    How to move your data to a new Identity
    BTW, how much free space on your drive? Use Disk Utility in Applications/Utilities to find this info. You need a minimum of 10% free but 15-20% is recommended.
    Outlook gets very sluggish when you are low on disk space. If you have a bunch of older Identities from previous rebuilds you can delete these to help free up space.

  • ICal refuses to finish 'restore' ; trying to resolve sync issues.

    trying to fix sync issues.
    using missing sync.
    everything worked perfectly for a ling long time before i thought it'd be cute to go in and put birthdays into addressbook, and select the option in iCal preferences to add those events to my calendar.
    EVERYTHING has gone to **** since then.
    the missing sync guys recommend i backup and restore addressbook and iCal.
    addressbook did fine.
    when i select the saved ICal database file (icbu) from my desktop, it will not complete.
    what gives?
    i'm trying to do this to fix another problem.
    its like every step is making a new issue.
    i am getting close to the edge guys...
    pleaes help.
    thanks!
    c
    (overall problem is that i cannot even get missing sync to overwrite my blackberry 8830 now.
    for months, iCal, Addressbook, and Tasks synced perfectly.
    all was well until i screwed with this stupid Birthday feature.)
    Message was edited by: clyde c

    also, i've already gone into iSync and cleared sync history....that didnt seem to affect anything.
    thanks in advance for any insights at all.
    c

  • IPhone and Windows 7 64 Bit - syncing issues

    Hi,
    Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
    'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
    I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
    I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
    Microsoft Windows 7 x64 Business Edition (Build 7600)
    Gigabyte Technology Co., Ltd. P55-UD6
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number E400D*7E1<Edited by Host>
    Current user is an administrator.
    The current local date and time is 2009-10-23 19:56:37.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 5800 Series
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: cecad029456cdd284aef514988f34808
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
    Connected Device Information:
    iPhone, iPhone 3GS running firmware version 3.1.2
    Serial Number: 88924**3NS <Edited by Host>
    Most Recent Device Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.1
    Serial Number: YM937**72D <Edited by Host>
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
    I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
    I am not sure what to do now....

    Well, the new gigabyte bios fixed the issue.

Maybe you are looking for

  • Error while creating a section in bcc

    i have to create a section below promotions and coupons... foorepository.. but i am getting an error when i when i select the subsection.. 15:39:40,314 INFO [STDOUT] [BlazeDS][ERROR] [Message.General] Exception when invoking service 'remoting-service

  • Mapping a parameter to the form field (OIM 11g)

    Hello, people! How can I get an information from a created form field? In more details: I have to assign a manual creating of a resource to a concrete group of users. So I made a form that contains a field named "Admin Group", made a process for this

  • [BUG in coreutils-8.15] - Wierd 'du' behavior on my server ...

    Suddenly, today I needed to know what's the size of the backup tars from my linux-vserver based vps running fully up-to-date arch linux and I can't seem to find out why 'du' is acting like this. ┌─[23:39:09]-[root@stavrovski]-[~] └─› du -csxh /tmp/*

  • Continued to next page

    Hi All, I have a group and sub group in the report. If the sub group records continue to next page, i want to display 'Continued from next page' and also repeat the parent group record in the continued page . I have used the following function in rtf

  • How to get the query name in runtime?

    Hi, I have a variable which is used in several queries. How can I figure out which query is using the variable? can anyone help? thanks and regards