Weird things happened with the PIN messenger...

Hello all,
First post here! With th ePIN Messenger, when I try to add my daughter, it actually adds me... I receive the request I sent her. I use her PIN. She never recieves my request on her phone...
Any solutions?
Regards,
Mike B

Have you tried adding you as a contact on her PIN Messenger ??? do you receive the request ???

Similar Messages

Weird things happening with volume

When I have my headphones in and I'm listening to music the volume keeps turning itself up to its max, I then really struggle to turn it down using the volume buttons on the side of the phone, its like I am fighting it as it keeps trying to increase (weird I know).
Not only that, you know when you increase the volume and the ringer symbol appears and you can move the volume up and down? This keeps appearing on its own and it won't go until I decrease the volume, sometimes when I've done it the same thing happens with the music volume I'm fighting it and it keeps increasing!
I've tried a reset and updated software etc, I've even changed the case the phone is in but nothing has fixed it.

Yes. YES.
I tought I was the only one going mad. I totally agree with you.
The output level is way too high. This also results in a poor resolution in the lower range of the output level, resulting in (quantization) noise. Very annoying.
The only advantage of this powerful headphones output is that the level on max output is comparable to line level, so when you plug it into an amplifier/receiver, the level is comparable to any other line level source.
Let's hope it is a software/driver issue which can be fixed... I liked my old PB G4 better in this department...
grtgld

I have several layers for this image: Background, Moon, Tree, Grass and Clouds. When I try to use the Move tool to move the Moon, the tool jumps to the Tree layer. The same thing happens with the other layers as well (except the background layer). How

I have several layers for my image: Background, Moon, Tree, Grass and Clouds. When I try to use the Move tool to move the Moon, the tool jumps to the Tree layer. The same thing happens with the other layers as well (except the background layer). How can I keep the move tool from jumpimg to the Tree layer?

1. Pre-select (highlight) the layer to move in the Layers panel. or-
2. [ALT+Right mouse click] to select the wanted layer in the image window.
and maybe
3. Set the PS option to "Auto-select" a layer with cursor hover. (can be very confusing!)

Weird thing happening with my iCal

A weird thing is happening with my iCal, I don't know if it's a bug... Today I was printing the months of September and October with all my appointments, and when I was checking October I have noticed that 14th was printed as Saturday and as Sunday too, and 15th became Monday, 16th became Tuesday, and so on.
But in my computer screen the calendar was correct: 14 Saturday, 15 Sunday, 16 Monday, etc.
I cannot figure out what could be happening and how to solve this.
Any idea?
Any help will be appreciated.
PowerMac G4 1.5 AGP Graphics Mac OS X (10.4.7) 1 GB RAM

Today a friend of mine said that he had a similar problem with iCal when printing the month of October, and that he fixed this by changing the Time and Zone setting in System Preferences. When he changed the setting from Sao Paulo, Brazil to Buenos Aires, Argentina (the both have the same time zone) the problem was solved.
Today I did this and my problem dissapeared too. But I would like to know why is this happening.

Weird things happening with Lion

Since I installed Lion I noticed that some applications became slower... when I open a file in Word and other applications, for example, that file opens together with the last file I worked in the application. How do I get rid of this?
There's a delay to open pages in Safari; I noticed that Safari became slower. And the system inicialization is slower too. Is that normal?

...when I open a file in Word and other applications, for example, that file opens together with the last file I worked in the application.
That behavior is part of the auto-save and resume functions that Lion uses.
To turn off the auto-open of last docs, go to System Preferences > General and uncheck the "Restore windows..." item in the 'Number of recent items' section.
In general, after updating to Lion the first time you run an app it will load slower than previously; this includes loading the OS at startup. After that first time slowness their opening should return to normal.
If you have not repaired permissions in a while, it would not hurt to do so.

Weird thing happened with my mail.app that I want it to do again

a couple of days ago, I ws using my mail.app and I looked at my messages and there was one message from amazon.com when there should have been 3. It said I have 3 messages from amazon.com & when I clicked on it the 3 messages appeared like they were filed away there. I want to do it again or at least figure out what it was

This is called organize messages by thread.
The following was copied from Mail Help:
A "message thread" is the chain of replies in an email conversation. Mail can help you quickly identify all of the messages in a thread by highlighting them in the color of your choice and grouping them together under the most recent message, sorted by date. Even if someone changes the subject line, Mail keeps the messages grouped together with the other messages in the thread. You can view them together and file them or delete them quickly.
To highlight all messages in a thread in the same color when you select one message in the thread, choose Mail > Preferences and click Viewing. Select "Highlight related messages using color."
To select a highlight color, click the color well in the Viewing pane of Mail
Preferences and choose a highlight color in the Colors panel.
To group your email by thread, select a mailbox and choose View > "Organize by Thread."
To see all the messages in all threads, choose View > Expand All Threads.
To see all the messages in a specific thread, click the triangle to the left of the thread or select the thread and press the Right Arrow key.
To collapse all threads, choose View > Collapse All Threads.
To collapse a single thread, click the triangle to the left of the thread or select the thread and press the Left Arrow key.
To step through messages in a thread when you have organized your mailbox by thread, choose View > Select > "Next Message in this Thread" or "Previous Message in this Thread." Or, use the Up Arrow and Down Arrow keys.
When you select a collapsed thread, the message content area of the Mail window shows the subject of the thread, the originator of the thread, the date the thread was started, the number of unread messages, the total number of messages, and a list of the messages, including which ones came with attachments.
Mail uses special headers in each email message to determine if a message belongs to the same thread. If these headers are not present, the subject is used to determine if a message belongs to the thread.

My current iPhoto'11 version is the 9.2.1 one. I just attempted to install the 9.2.3 update, but all I got was an Alert sign stating that "iPhoto 9.1.0 or later is required to install this update." Same thing happened with the 9.1.0 update afterwards.

My current iPhoto'11 version is the 9.2.1 one. I just attempted to install the 9.2.3 update, but all I got was an Alert sign stating that "iPhto 9.1.0 or later is required to install this update." I then tried to download the 9.1.0 update, with the same fruitless results. What can be wrong here?

Put iPhoto back into the Applications folder, not in any subfolders, and ensure it's named iPhoto or iPhoto.app.
(65384)

Weird things happening with photoshop layer duplication

Hi there
I'm running PS 2014.2.2 on Mac OS 10.10.2
I am trying to duplicate some type layers from one file to another - I highlight the layers in File 1, right click to 'duplicate layers' and select file 2. The layers appear in file 2 in the layer palette but are not on the file - I have checked to see if they are behind another layer and double clicked on the 'T' icon to see if I can select the type. I have switched off all other layers and the duplicated type layers are definitely not there. Just for good measure I dragged and dropped the layers and this does work. I have also tried making a copy of File 2 to see if the file itself was corrupted - this doesn't work either. Finally, I have tried duplicating other layers from File 1 to File 2 - this DOES work. Finally finally, I created a totally different type layer and tried copying that - this doesn't work!
I have uninstalled PS via CC and re-installed (not checking 'remove prefs*) - problem persists.
Anyone got any bright ideas?
Martin

Genius - you may the rest of the day off!!
I, on the other hand, am a complete idiot. File 1 is 1500px deep and File 2 is 1000px. Duplicating layers in this way places the layers EXACTLY in the position they were in the original - in this case 300px below the canvas. Revealing all - weel, reveals all
A thousand thanks
Martin

Strange thing happened with the screen

I've had my Mac Pro for more almost 18 months.
Today I was in a site and I leave my desk for a moment, when I return the screen was distorted, the colors, like when you zoom in a pic and you see the pixels.... I press the button and it restarted normally.
My question is, do you think this is a virus or something like that? I recently download some templates for my blog.
Any advice?

Welcome to Apple Discussions!
Check and see if you might have the NVIDIA chip issue:
http://support.apple.com/kb/TS2377
Another possibility is that the Zoom may have accidentally been turned on. (System Preferences>Universal Access>Seeing.)
If it is the NVIDIA problem, Apple should repair it at no cost to you.
Good luck!

After updating iTunes 10.5 and iPhone 4 iOS 5 my phone doesn't work at all. It freezes while it is trying to do the Restore phone. That means I have not have a functional phone for two days now. Same thing happens with my iPad 2.

I updated Itunes to v 10.5. Mistake!!!! Then updated iOS 5 to my iPhone 4 now my iPhone doesn't work as the applications freezes when trying to restore the phone. Same thing happens with my iPad 2, so now I have two pieces of equipment that are completely non-functional. Can any please tell me what to do? How can I reinstall the previous versions of iTunes, or iOS which were working on my iPhone and on my iPad? I hate iTunes and this has been the last drop that messed up my equipment. Please help me. I do not have another phone to call APPLE. This ***** big time!! PLEASE HELP ME!!!

Connect to a computer to restore.

My iphone safari history, my 'reading list' shows visits and sites that I have never frequented. A few months back the same thing happened with my youtube history. My phone is pass protected, so its just me using it. any ideas?

My iphone safari history, my 'reading list' shows visits and sites that I have never frequented. A few months back the same thing happened with my youtube history.
My phone is pass protected, and its just me using it, phone with me all the time. any ideas?
How can things be added to my reading list/youtube???

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

About a week ago, I purchased a subscription to Adobe CC Photoshop and Lightroom. I can access Photoshop but this screen still comes up asking me for the license number or if I want to continue the trial. The same thing happens with Lightroom, only it mak

About a week ago, I purchased a subscription to Adobe CC Photoshop and Lightroom. I can access Photoshop but this screen still comes up asking me for the license number or if I want to continue the trial. The same thing happens with Lightroom, only it makes me sign in and takes me to the tutorials. I cannot access the actual program. Help!!!

Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link

Its my ipad 3 when i open appstore it says can not connect to app store and the same thing happens with itunes store

its my ipad 3 when i open appstore it says can not connect to app store and the same thing happens with itunes store?

1. Sign out of Apple ID and sign in again
2. Settings>General>Date & Time>Set Automatically>On

Safari 5.1.5 shows .pdf web pages as black. The same thing happens with Firefox. Does this have something to do with an AdobePDF plug-in?

Safari 5.1.5 shows .pdf web pages as black. The same thing happens with Firefox, at least with the few pages I've checked. Does this have something to do with an AdobePDF plug-in? I recently had to restore my system from Time Machine backup.

The following appears to have I solved my problem with Safari 5.1.5, 5.1.6 and 5.1.7. I also have Adobe Acrobat Pro 9 installed.
Follow mbuffy's post dated May 10, 2012 directly above, and
Do NOT allow Adobe Acrobat Pro 9 to perform the "repair" the missing Adobe PDFViewer Plug-in when the window pops up and offers to repair Adobe PDFViewer Safari Plug-in. If Adobe does the "repair," then I can not view .pdf web pages in Safari or Firefox.
FYI, cmmartin0275 posted the following on Sep 8, 2011 in a discussion of "Missing PDF Pluggin" at https://discussions.apple.com/message/16119130#16119130:
"Just FYI to anyone with this problem...this is straight from Adobe's website.
"Adobe Reader plug-in and Acrobat plug-in are not compatible with the Safari 5.1 browser, which will ship with Mac OS X 10.7 and for 10.6 in July. Adobe Reader and Acrobat will continue to work as standalone applications on Mac OS X 10.7 and 10.6, and will render PDF documents outside of the browser. In addition, Safari 5.1 renders PDF documents natively. However, the Adobe Reader and Acrobat plug-ins will not function as expected in LiveCycle and Acrobat workflows that require either plug-in to render PDF documents in Safari 5.1."
They also go on to say they hope to have a solution or work around before the end of 2011..."
Thanks for the help.

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

Weird things happened with the PIN messenger...

Similar Messages

Maybe you are looking for