Weird ticking sound when adjusting the volume...

Hi all
When adjusting the volume using the F3 F4, my new ibook 12" g4 makes a weird ticking sound before it catches up an adjusts the volume with the normal "blop" sound. Is this normal? Batteri is on "normal."
Thanks
Erlend

I have this same problem with my new 1.33Ghz iBook G4. I've had the logic board replaced twice and the top assembly with the speakers replaced twice also. It still makes the ticking noise and it's quite specific to reproduce so none of the Apple tech have spent the time to reproduce it. I think this problem is more wide spread than Apple realizes.
Here are the factors that HAVE to exist for this problem to be reproduced:
1. The computer must be have the AC adapter unplugged and running off of the battery.
2. Un-click "Play feedback when volume is changed" in System Preferences under "Sound" (While this is not exclusive to having the "ticking audio" problem occur, it is easier to notice with this box unchecked)
3. 10.4.2 or 10.4.3 (even happens on a fresh install)
4. Push the F4 and F5 keys to change the volume for at least 10-20 seconds and the "ticking sound" will occur. (the lagging after the tick is most annoying.)
Launching iTunes and playing audio will temporarily make this problem subside. Once this problem occurs with "Play feedback when volume is changed" unchecked, it will continue until audio is played or the sound preference panel is accessed. Often the sound balance will be 100% to the left after this problem has started occuring. (Checking the Sound preference panel shows this)
Has anyone had this problem fixed permanently? Apple seems to be unaware of this problem. 10.4.4 could fix it. Unfortunately we are not even sure if this is a hardware problem or a software issue. I will post with details of what happens when I bring my machine in to the Apple store for the 4th or 5th time.
Power Mac G5 1.8Ghz DP, 1.25GB RAM. G4 iBook 1.33Ghz   Mac OS X (10.4.2)  

Similar Messages

  • Is it possible to disable the "pop" sound when adjusting the volume?

    It's just plain annoying.

    Thankfully, the solution is very simple. To silence the volume-changing beep, hold down the shift key while pressing the volume-up or volume-down key. (This doesn’t work when you use your mouse to select the volume menu on the right side of your menu bar.) If you’re using an iBook or a PowerBook, and you’ve set the Keyboard & Mouse preference pane to require the fn key in addition to the volume-changing key, don’t worry: adding the shift key still silences the beep and doesn’t require too much in the way of finger gymnastics.
    Ray...I knew I'd find something

  • Audio and Video sound cuts out when adjusting the volume whilst playing powerpoint presentations

    I have just bought a new hp laptop and when running power point presentations with embedded media (for my job) I cannot adjust the volume of the sound when the audio or video file is playing. It simply cuts out and stops the video or sound from playing. I thought at first that this might be an Office 2010 issue but now it seems more likely to be a setting on the laptop. If anyone has any answers they would be much appreciated!! Many Thanks

    I hear you on this. I just tested out the 3GS video for a concert where band mixed electronica and guitars.. boom boom satellites and I noticed when close to the speaker side of the stage the sound cut in/out. But when I moved farther away sound remained consistant.
    What I may suggest is lowering the volume to mid range when closer to your sound source then
    correct (if needed) using outside software.. iMovie Final Cut, etc..
    Yes, I wasn't to please about losing sound on a what I recorded.. ~A~

  • How do I disable the sound effect on my MacBook Air when adjusting the volume

    how do I disable the sound effect on my MacBook Air when adjusting the volume

    Thanks Ralph, that fixed it, I did uncheck that box earlier however I had not restarted the computer. Thanks again.

  • Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

    Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

    Hello, Miryam Maria. 
    Thank you for visiting Apple Support Communities. 
    I see you are experiencing issues with sound on applications when playing video/audio content.  If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute.  Below I have included an article that covers adjusting the  settings for the side switch.  Also, make sure to close all applications in Multitasking and power cycle the device.  Test the sound issue after processing these steps.
    iPad: Understanding the side switch
    http://support.apple.com/kb/ht4085
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Cheers,
    Jason H.

  • My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume.  I have been in system prefrences to check all the sound settings and everything is set properly.  What do I need to do to fix this. Help!

    Though I have doubts for success, you might try a SMC reset.  It can do no harm.  Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
    http://support.apple.com/kb/HT3964
    Ciao.

  • A weird ticking sound from the base of my macbook pro?

    My macbook pro was bought in October 2011 but I think it's the Early 2011 edition. It's an 15 inch. My problem is that I hear a weird ticking noise coming from the base of the computer. It sounds like it is coming from under the keyboard and the mouse pad. I usually hear it whenever I move it around or place my hands on the hand rest spot(?) when I'm typing. Anybody know if I should be worried or how to fix it? The sound is really annoying... Let it be known that I baby my macbook pro. I have never dropped it on the floor or slammed it on a table or something.
    Thank you in advance
    P.S. If it matters, I'm running on
    Mac OS X Lion 10.7.2.

    That could be the stepping motor in the hard drive making noise.  Sometimes the noise means nothing, other times it could mean a problem with the hard drive and it could fail soon.  Could be a fan out of allignment.  If you can backup your data, do so.  If you an get to an Apple genius bar, take it in and have the techs run some tests to find out what the noise is.

  • HT5882 Can't adjust the volume on my iPhone 5s when in doc

    I have my iPhone 5s in the doc and my headphones plugged into the back.  I can't seem to adjust the volume.  It is wayyyyyy too loud.  Can you help me?

    I had the same issue. I also couldn't hear any music or sound from apps and no sound when I typed a text message. But ringer worked which was odd. I sent in for repair and Apple sent me a replacement device.

  • How to adjust the volume of the tone you hear when dial a number

    Any idea how to adjust the volume of the tone you hear when you dial phone numbers?
    Post relates to: Centro (Sprint)

    There are no sounds except on the handset earpiece for the dialer buttons when you dial a number; is this what you are speaking of? All sound settings are found under Prefs, Sounds & Alerts, then choose Ring Tones, Phone Alerts, Calendar, Messaging, System, then choose the settings you desire.

  • I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up

    I have a mid-2009 MBP and I've been using my BOSE Companion 20 with it for about half a year now. It was fine until recently, when i want to adjust the volume using the pod on the BOSE Companion 20, it will cause like a surge in volume, spiking it up and down. It will not stablise itself! It's very fustrating. Anybody with the same issue?

    I have the BOSE Companion 5 speakers and have had the same problem. I've searched everywhere and gotten nowhere. My speakers are way past their warranty, so calling Bose would probably get me no where either. Only thing I can think of is that the speakers overheat which causes the spikes in the volume. I've tried unplugging them for a few minutes and then plug them back on. The problem does go away, but after about 5 minutes, same problem.

  • I have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume

    i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

    i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

  • Why can I not adjust the volume on a video when accessed from the lock screen

    Why can I not adjust the volume of a video in my pictures folder, when accessed from the new lock screen option?

    There is no way to access videos directly from the lock screen.
    What exactly is being attempted here?

  • When adjusting the audio volume in a selected region, why does it give me a curved line instead of straight and why cant I change it like i can with a fade in our out?

    When adjusting the audio volume in a selected region, why does it give me a curved line as a transition instead of straight, and why cant I change the fade shape like i can with a fade in our out? When I slide thet volume all the way down it makes a very abrupt down curve. It's audibly noticdible.
    Thank you.

    Use the range selection tool and select the portion of the clip you want to change the volume on. Drag the volume line down and FCP will create keyframes which you can adjust as you want to get a fade shape.

  • Hi I'm new to Mac. I have a macbook air and for some reason the top keys, ec, f1 etc etc are not functioning and emitt the non function noise when pressed. Also the volume keys don't adjust the volume. Have I done something to disable them?

    Hi I'm new to Mac. I have a macbook air and for some reason the top keys, ec, f1 etc etc are not functioning and emitt the non function noise when pressed. Also the volume keys don't adjust the volume. Have I done something to disable them?

    I don't have the same version of OS X here but try System Preferences>Keyboard. Is there an option similar to "Use the F1, etc, keys as standard function keys"?
    If so, and it has a checkmark, uncheck it & see if that does the trick.
    ~Lyssa

  • Phone turns off by itself/when i adjust the volume is switches to headphone

    two issues here
    first is that my phone just turns off on its own. happens 1-2 times a month. anyone else having this happen to them?
    second is when i adjust the volume up/down the phone switches to headphones when no headphones are plugged in.

    perform SMC reset
    SMC reset
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    If the same contact Apple for appt. for full in shop diagnostic and possible repair.

Maybe you are looking for

  • Newbie: Mail Transfer Problems from Mac 10.6.2 to Mac 10.8.2

    I am giving my old macbookpro away (OS 10.6.2) and got a new OS 10.8.2 How do I transfer my Mail (everything from inbox to sent items) from the old mac os to the new MacbookPro laptop's Mail? I am a newbie but uses the Mac's Mail for my business and

  • HR_INFOTYPE_OPERATION exception error: cx_hrpa_invalid_buffer_access

    I've been checking the SAP Notes but so far haven't found a solution to my issue, so I thought I would post it here. Currently during the hiring action, we are having the following problem in the program. CX_HRPA_INVALID BUFFER ACCESS CL_HRPA_MASTERD

  • Adobe Edge Animate CC crashes when using big SVG images

    Hi! When I import SVG files to Edge Animate it freezes and I can't do something with that. I tried to import one file at a time and it worked fine but when I save project and close program and then open my project again Edge Animate just crashes. Als

  • Problem creating cache group for a table with data type varchar2(1800 CHAR)

    Hi, I am using TimesTen 7.0 with Oracle 10.2.0.4 server. While creating Cache Group for one of my table I'm getting the following error. 5121: Non-standard type mapping for column TICKET.DESCRIPTION, cache operations are restricted 5168: Restricted c

  • Embedded PDF Form Not Appearing in Explorer 8

    I have a Joomla site where I have embedded an interactive PDF form that was created on FormsCentral. The embedded form appears using Window 7 and 8 with Internet Explorere 10 and 11 ... but will show on machines running Windox XP with Internet Explor