Weird, uninterpretable error message

When I watch a live webcam broadcast, it works for about 2 minutes and then freezes. I then refresh the url and I get the message displayed at http://pic20.picturetrail.com:80/VOL16/709572/1195058/288107775.jpg. The webcast then resumes for about 2 minutes, freezes, and I go through the steps again. Webmaster is zero help. Can anyone decipher this for me?

I used to get these Kind of error messages all the time. I don't think it's itunes. It could be your computer. I would Try scanning for errors at start up. When I had this problem I had a tone of errors on hard drive. I so many errors the Computer would not even start windows. I had to replace the hard drive. How old is your computer because their could be a lot of errors on the hard drive. A good place to purchase a new hard drive is Tiger Direct you could get a very large Capacity hard drive for under $200 maybe even under $150 or less I bought a 300Gb Hard drive from their a year ago for less than $150 now you could probably get a 500GB for that price
Message was edited by: Movieman3001

Similar Messages

  • Weird playlist/ERROR message/won't sync songs/won't restore!

    I just ran out of room on my ipod, and something came up saying do you want to create some playlist? I'm not sure exactly what it said, but it was so I can make more room on it. I went through my library and deleted songs I didn't want anymore and I deleted this playlist that my Itunes made by itself. I added my new songs, tried updating my ipod and it won't sync the songs. It says "Songs on the Ipod cannot be synced because all of the playlists selected for syncing no longer exist." I tried restoring it, but another error came up. Nothing works.
    Any ideas? Or do I have to take it in to the Apple Store?

    I assume you have seen this article regarding this error message.
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • HELP PLEASE! Weird email error messages

    Hoping someone here can help.
    I have my work email on my Tour 9630 (VZW; v5.0.0.975) and it is a lifesaver. This AM however, I started receiving 'error messages' whenever I sent an email to colleagues at my company -- i.e. those with the same @____.com addy as the one I was sending from. I rebooted the BB, same thing happened. Tried removing the email account, rebooted the BB, and added the email account again. Can receive emails from colleagues, but can't reply to them or forward to them. Just keep getting the following error message:
    5.3.0 - Other mail system problem 550-'IP Authorization check failed - psmtp'
    Verizon Wireless couldn't help, as I'd already done all they recommended. And my work IT team said the emails aren't even hitting our company server, its being stopped somewhere else along the line.
    I get close to 500 emails a day on this and not being able to send replies to colleagues or forward messages to them is unacceptable.
    ANYONE have any brilliant suggestions or solutions???
    Thanks!!

    Hi smcchick84
    How is your email integrated on your BlackBerry?  I assume it's using Outlook Web Access (OWA)?  Also, are you able to send emails to addresses outside of your domain?
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Weird email error message

    Hi - when checking my inbox on my iphone4, I get the message "Cannot Get Mail - the account Big Pond is in use on another device". Then mail proceeds to download anyway, and duplicates those downloads next time I check in. suggestions appreciated.

    Would you have the email signed into on another iphone, ipad, ipod or smartphone?
    Are your incoming and outgoing mail servers correct?. You may need to double check this with Telstra.
    Also because bigpond mail is a POP account you may need to try the steps in this article:
    Using a POP account with multiple devices

  • I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Using Site Content and Structure unable to move documents,pages and getting weird error message

    Hi ,
    earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
    Now,we are getting a un-readable format error.
    After selecting the destination we are getting the error.
    and the file can't move.
    What might me be the error.
    Expecting answers related to my question.
    1.As we can do using Internet Explorer,
    2. Using Send To also we can move.
    Using this Site Content and structure we can maintain Versoining also.
    If any one face the same issue then we can easily find out the solution.
    Regards ,
    Prathap 
    SP Developer
    Specify the destination to move the items you selected.

    Hi,
    Using Site Content and Structure unable to move documents,pages and getting weird error message
    We are getting Below error:
    When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
    1576|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|cccccccccnncnnnnn|

  • 7.1.1 iTunes Fails to Launch (No Error Message, Pretty Weird)

    After downloading iTunes 7.1.1, I installed iTunes. The installation went well and everything was installed. I had no problem with installation.
    However, after installing, I tried opening iTunes. However it fails to launch and I don't receive an error message.
    When I open the Windows Task Manager and check out the processes, the iTunes.exe appears for 10 seconds and then disappears.
    The weird thing is, is that iTunes version 4.0 works perfectly. (I think it's 4.0. It's the one that has the green note. The current versions have the blue note.)
    I can open it up and play my music.
    I have a Dell Dimension 8200 (It's about 6 years old.) The operation system is Windows XP.
    Can someone explain and tell me how to fix this problem, so I can open iTunes 7.1.1.
    Thanks.

    However, after installing, I tried opening iTunes. However it fails to launch and I don't receive an error message.
    When I open the Windows Task Manager and check out the processes, the iTunes.exe appears for 10 seconds and then disappears.
    doublechecking one more thing that can help narrow in on possible culprits with these sorts of symptoms.
    try launching your QuickTime. does it:
    (a) launch perfectly fine?
    (b) fail to launch with an error message? (if so, what does it say?)
    (c) exhibit other peculiar behavior? (if so, could you describe it for us?)

  • Error message -50 ever since I installed new version of iTunes... weird!

    A few days ago I installed the new/updated version of iTunes from the 'automatic prompt' which informed me there was a newer version of the software available.
    Now, ever since I've been using iTunes upon start-up I get this weird thing happening:
    1- ITunes opens, no problem
    2- Progress bar appears on screen saying "Updating iTunes library" (which never happened before I installed the new version on iTunes)
    3- An Error message appears saying "the iTunes Library files cannot be saved. An unknown error occurred (-50). Do not warn me again"
    Well, my iPod seems to be sync-ing fine and I've not lost any music, so I'm confused as to what this error message actually means.
    If anyone can shed any light on this or what I've done wrong I would be most grateful.
    I don't fancy losing all my podcasts and music! Ouch...
    Thanks!
    MacBook Pro     video iPod 80GB

    I would check macfixit.com . there are several articles about fixing the -50 error. The latest article is free, the others require a subscription. This is from their very helpful site:
    Another option for recreating the library to resolve -50 errors We previously reported that a full library deletion and restore may be required to eliminate -50 errors that occur while iTunes 7.3 is launching. The process we mentioned involves backing up the music library to another location, then deleting the original library and finally re-importing. However, you can also simply backup then create a new library at launch and re-import, as follows:
    1. Quit iTunes
    2. Backup your iTunes library (the folder ~/Music/iTunes) to a separate location (can be on the same volume)
    3. Launch iTunes while holding down the option key and follow the steps to create a new library
    4. In iTunes, choose Import from the FIle menu
    5. Select the backed up ~/Music/iTunes as a source folder
    6. Restore any deleted preferences
    <<<br>
    G5 1.6   Mac OS X (10.4.10)  

  • Weird error message using phone as iPod

    When I plug my iPhone into my car's iPod connection cord (which works fine with regular iPods and does not cause regular iPods to display any weird error messages), the iPhone says something about how "...that accessory does not work with the iPhone..." and asks me whether I want to switch to airplane mode. In spite of this weird message, I am able to play my music via the usual method in my car. Weird. Remedy?

    Actually Human,
    Many iPod accesories were not designed to operate in close proximity to a GSM phone. The iPhone is a GSM phone. There is a program for iPod accessory manufacturers to test and certify their accesories for use with the iPhone. This article contains more information:
    http://docs.info.apple.com/article.html?artnum=305766
    That being said, many will work without going into airplane mode, some will get interference from the GSM signal that will come through as a hum or sometimes popping noise. Since sending and receiving the GSM signal is needed to make calls, the iPhone can't be shielded to prevent interfering, the accessory needs to be.
    This article contains more information on potential interference:
    http://docs.info.apple.com/article.html?artnum=305662
    The short answer is the car adapter may work without going into Airplane Mode, or it may have interference from the GSM signal at times.
    Hope this helps,
    Nathan C.

  • Weird error message on Adobe Reader XI installation.

    I've just downloaded Adobe Reader XI and started to instal it but get this weird error message:  "The ordinal 459 could not be located in the dynamic link library urlmon.dll".  What does this mean and what can I do about it?

    Hi EbSax,
    Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
    ~Deepak

  • Keep getting a weird error message in AE CS4

    I keep getting this error message concerning a few of the files in my Project bin:
    I get this message multiple times when I open this particular project and repeatedly click "OK" until the project finishes opening up.  The result is missing files.  When I go to replace the file with the proper file which it already should be anyways it pops up this error message on me again.  What does this mean and why are my files not able to be in AE?  Sometimes they are and sometimes not.
    I can drag the same file into the project bin and it will work fine (but I have to go through the trouble of putting it back in the correct spot in the layer stacking order in my compositions that use this particular file).

    Hi, still having this problem.  What's weird is it's intermittent.  I'll go to open the project one day from the same drive hooked up the same way and it will work and then the next day, without even having imported anything into the project the previous day, it will give me the error and I'm screwed because there's so many files that are "missing".  I tried renaming a long file name with only 10 characters in the finder and then replacing the file in AE and when I hit OK it gave me the same exact error message.

  • Help Weird Error Messages Connecting Externals on USB

    Hi,
    For some reason very recently everytime I plug in a peripheral into the usb port I get a weird error message and the units (like an external HD, external DVD burner, etc.) won't work. The errors are something like:
    The system extensions/system/library/extensions/systems/kext plugins/libkern.kext was installed improperly and can not be used. Please reinstall ir or contact the products vendor for an update.
    Ohter error with the have the same message but file components change like:
    iousbfamily.kext
    bsdkernel.kext
    mach.kext
    udf.kext
    system.kext
    unsupported.kext
    Anybody have a clue? Thanks

    Yes, you should absolutely report it as a bug.
    But this is a problem in error reporting, not in valid code compilation, because the code
    cannot compile -- so don't expect to impart much momentum on a fix without additional community support.
    There's very clearly a coding problem that the static function f cannot access the non-static member
    g.
    To estimate the risk of more serious problems with the compiler, I investigated the two closest scenarios for making the code legal.  If you either:
    make g a static member (and give it storage), or
    make f a non-static function (and call it with an instance of A)
    ...then the code is valid and the compiler doesn't ICE in either case.
    So the severity of this problem is very low because, as you said, this ICE seems to occur only when there is an error in the code.

  • Weird error without any error message

    I've been working on some actionscript 3 system. And all of a
    sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in
    Flash CS3, a white screen would open up (instead of the normal
    flash program) and no trace-output would be given.
    Three hours later I found the cause of this weird problem.
    It's (simplified) the line:
    var value:Number = -(true ? 1 : 0); // This one doesn't work.
    Put this line in your script, and your entire program won't
    execute. And without any error message! I was wondering, why is
    that? By the way, the following lines do work:
    var a:Number = -(2*3+4); // Gives -10.
    var b:Number = (true ? 1 : 0); // Gives 1.
    var c:Number = -b; // Gives -1.
    var d:Number = 0-(true ? 1 : 0); // Gives -1.
    var e:Number = -((true ? 1 : -1) as Number);
    So, my guess is that the code (true ? 1 : 0) gives some sort
    of data type which is not a Number, and therefore doesn't except
    minus signs. But that wouldn't explain why it doesn't even give an
    error. So what IS wrong with it?

    ok - well if these numbers are used to begin the execution of
    a method in your file, it's likely that they are not firing up
    because the syntax here is incorrect. in order to use this type of
    conditional operator (which i do use quite often as well, handy
    convenient ;) the structure should be:
    var value:Number = (condition) ? 1 : 0;
    'true' is not a 'condition' but a boolean result, so it
    should not be evaluated in the way have been using it here -
    however 'true' is 'true' so the result will always be 1 (the first
    expression in the operator) - i'm not certain why you would need a
    -0 result and if you are always wanting a 'negative' number then
    use that number in the return expression, as in:
    var value:Number = (condition) ? -1 : 0;

  • IPod seen by windows, not by iTunes+ weird error message

    I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
    and why is there no email adress from apple for service qustions? 10x

    I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
    Did you read the document i linked you to? here's another link to it:
    Putting iPod into Disk Mode
    whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
    ... never mind ... i guess you've fixed it anyway ...

  • Weird error message when loading songs to Shuffle

    Hello,
    I'm getting a little bit p.o.'d with the Shuffle I bought for my husband for Christmas.
    Here is what's happening and what all I've done since last night...
    Happening: I get the Shuffle to show up in the iTunes source list and can load it with 5 songs and then each time I try and drag another song onto it, I get the following error message:
    "The iPod "MyPod" cannot be updated. The required disc cannot be found."
    When I select the Shuffle from the source list, the songs I tried to load and received this message with show up with a grey circle/dot next to the number that the particular song would be in the Shuffle's list.
    At first I thought maybe it was happening because a long time ago I had another computer and burned a disc of all the songs I purchased from the iTunes Music Store and then dragged into iTunes library on my new computer. So then I bought a new song last night and the same thing happened, same error message.
    Here's what I've done so far:
    I have removed/reinstalled iTunes 6 and the iPod updater. A couple times last night when trying to restore the Shuffle to factory settings, it didn't show up in the updater. I've trashed the plist files, repaired permissions, removed the iPodDriver.kext file, as told to do so in an Apple article.
    I'm getting a wee bit frustrated and am hoping to get some help from all of your people here on the discussions!
    I also noticed that none of these problems happen with my iPod Mini, just the Shuffle. Since I just got it yesterday, I will phone Apple support this morning when they open and will post back anything I learn, but I'm hoping someone here can help me (us) out before having to deal with Apple---I'm about to pull out my hair here and that's just not a good look for the Holidays, you know?!
    Happy Holidays everyone!
    Mary

    Hi srb,
    Actually my iPod Mini is called Mary's iPod and the Shuffle is called MyPod. They both show up in iTunes now and I found a "workaround" to get the songs on the shuffle, making a playlist and having the shuffle autoload from that list.
    Thanks for the feedback and happy holidays!
    Mary

Maybe you are looking for