Weird USB sound when connecting my iPod

I have an iPod touch 2nd gen.
Everything was fine until today, when I tried to connect it in my computer.
When I try to connect it, there is a weird sound
Like when you disconnect a USB plug, except the lower notes repeat 3 times
My computer does not recognize any usb and when I check on my ipod if it's connected, there's nothing
Can you help me?

If the computer does not see the iPod, meaning iTunes also does not see the iPod, there's not much you can do.
Make sure you have reset the iPod touch
http://support.apple.com/kb/HT1430
Also, try connecting the iPod touch with all other USB peripherals (except for keyboard and mouse) disconnected. This includes any hubs. There may be some odd conflict between devices.
If that does not work, your iPod touch is still covered by the one year warranty, so you should get it checked out by an Apple authorized tech (or at an Apple Store if there's one nearby).

Similar Messages

PC sometimes crashes when connecting my iPod

Hi,
Apologies if this has been asked and answered before, I couldn't seem to find anything relating to my particular problem.
On occassions when connecting my iPod to my PC at work I find that the PC powers down completely, without going through any shutdown procedure. I then have to switch off the mains supply, listen for what sounds like a slight discharge, switch on the mains supply and power up my PC. If the iPod is already cabled up there's no problem with powering up. This doesn't happen everytime I connect, just intermitently, but it's annoying as I don't have any problems with anything else in the USB ports I'm using. I've also tried different USB ports on the machine, and it doesn't seem to make any difference. The PSU for the PC is 380W, so that shouldn't be the problem.
Fortunately the iPod doesn't get chance to go into 'Do Not Disconnect' mode, so I've never lost any of my content. But it's still annoying!
Can anyone suggest what's causing this?
Windows XP Professional SP2 and all the current updates
iTunes 7.5.0.20
30Gb 5th Gen iPod
Thanks

Yes, the list on my computer of what is in my iPod library is grey, not black font. I tried "manual" but it will not allow me to drag anything to the iPod. Not even newly purchased music.
That certainly sounds like one of the Automatic syncing options has been engaged.
... quickly doublechecking, just in case. After selecting "Manually manage ..." in the device tab for the iPod in iTunes, did you click "Apply"?

Squeeking sound when connecting but no display

My ipod non 1G makes squeeking sound when connecting to my computer but no display and no functionality. When disconnecting from computer he is completely dead. Any idea which component is causing that so I can repair it?

Yes it is.
I've also tried putting it into different USB ports as well as 3.0 and 2.0.
And im sure that the screen works because it works fine with my MacBook Pro, so im thinking that i need some sort of driver... Not sure though...

Whistling sound when connected to aux cable

When I connect ipod nano to AUX port on my stereo I get a whistling feedback sound along with the music. But when connecting another ipod its fine. Any suggestions??

> The projector speakers are working because if I connect via the VGA output I do get sound from the projector.
There must be something wrong with projector settings.
Fact is that HDMI provide digital sound. VGA provides only analogue signal.
I dont think there is a problem with the notebook since the sound appears properly via speakers and also its working if an TV is connected to the notebooks HDMI port.
By the way:
> When plugged into the lecturn via HDMI, I can see the lecturn in the "Playback devices" window. It comes up as "Extron D" which is the name of the System installed. It is enabled and set to default ( green tick)
In the Playback tab check this projector, click right and choose Properties.
Now the second tab Level should contain the option to change the volume level.
Its worth a check.

Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

See:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

When connecting my ipod nano (5 gen) I get an error messege saying that it was recognized but not properly. Ive tried everything the support site says and it still not working. What do I do now?

When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Computer is crashing (freeze) when connecting my iPod Nano

Hello,
my computer is crashing (freeze) when connecting my iPod Nano. I have a Pentium IV with windows XP Pro. Can anybody help me please.

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Itunes freezes when connect my ipod

When connect My ipod Classic to itunes, itunes freezes and when disconect the ipod, itunes restabilized. I try uninstall all apple software in my pc, but no work. This problem continue in others computers
Sorry for my english, i speak spanish... HELP
EDIT: Ah! When connect mi iPhone is work correct, the problem is con my iPod. It's work perfect in hard disk mode, not know

Similar problem here:
When I'm playing songs with iTunes and connecting my 3G 20GB iPod, my computer will hang up completely - screen goes dark and I have to reset my PC.
However, when my iTunes is "idle", i.e. not playing a song or doing anything else, connecting and syncing the iPod will work just fine.
I'm using the newest (6.x) Version of iTunes on WinXP SP2 with a 3G iPod 20GB.
Martin

When connecting an iPod touch 4g to an accessory (car radio) can be heard crackling (cliping)

When connecting an iPod touch 4g to an accessory (car radio) can be heard crackling (cliping), as if listening to an old record, but via headphones everything is ok. So where is the problem?

All I can suggest are the standard fixes:
- Reset the car system/contact the manufacturer
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

Solution may be found if you search in the "More Like This" section over in the right column.

Lightning to 30 pin adaptor giving no sound when connected to docking station

lightning to 30 pin adaptor giving no sound when connected to docking station

I am always amazed in these forums by the number of people who think they are helping by asking obvious questions about the problem with no clue what the real issue is or how to help.
That being said:
I had the same problem after upgrading.
Could boot your tablet, should fix the problem.
1. power off the unit.
2. Power on by holding the power button and volume up button at the same time.
3. using the volume up and down button as a right and left curser, selectt the Android icon and press the power button.
4. this will cold boot the system and the various dock functions should return.
Warning: Selecting anything else but the android icon will reset the device to factory defaults and wipeout all your info.

Iphone 3 only blank light screen after fall on floor...say sound when connecting to Itunes

the Iphone is not broken, but it only shows a light blue/white screen. It gives a sound when connecting to Itunes. I have tried ti hardboot but no help. im now trying to recover trough Itunes but the screen is still light blue. it can be the graphic somehow??
What to do?
The Phone was falled out of my hands

The phone is CERTAINLY broken. It worked immediately before you dropped it, and stopped working right after. What makes you think that your dropping the phone didn't break it?
You have 3 choices:
You can bring your phone to Apple and pay for an out of warranty exchange ($149 in the US)
You can buy another phone
You can find a 3rd party repair shop in your area and see if they can ifx it.

IPod Touch 4th gen after updating to IOS 6.0.1 no longer plays sound when connected to a JVC KW-AV60BT through USB port.

It used to work fine, but now when you plug in to the USB, it properly identifies the head unit in settings>General>About, and the JVC unit displays album art, track info and scrolls through music fine, but no sound comes through the speakers. I've tried to reset all settings on the iPod, I've tried the reset on the head unit, even disconnected the vehicle battery and nothing changes. I can also add that my sisters iPhone 4S on IOS 6.0.1 also performs the same when connected. I've tried my Touch in the USB port of my 2010 Chevy truck and that works fine. oh, and an MP3 player worked proper with the JVC USB port.

- Try resetting the car system if you can.
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However. sometimes an iOS update breaks compatibility. In that case you will have to wait for a firmware update to either the care system or the iPod.

Bad sound when connecting iPod to stereo

Can anyone help with this one?
I am trying to connect my iPod to my stereo receiver. I have the 5th generation 30gb iPod. I hooked it up to my stereo (Sony str-de825) with a monster cable through the tape & video inputs and it it sounded low and muddy. When I turned it up the sound the receiver blew.
I now have a new reciever and bought a dock for the iPod, and I am getting the same crappy sound through the stereo and don't want to blow it again (obviously) but would like to be able ot use my iPod in my stereo. Does anyone have any idea of what's going on?
Thanks in advance.

Can anyone help with this one?
I am trying to connect my iPod to my stereo receiver.
I have the 5th generation 30gb iPod. I hooked it up
to my stereo (Sony str-de825) with a monster cable
through the tape & video inputs and it it sounded
low and muddy. When I turned it up the sound the
receiver blew.
I now have a new reciever and bought a dock for the
iPod, and I am getting the same crappy sound through
the stereo and don't want to blow it again
(obviously) but would like to be able ot use my iPod
in my stereo. Does anyone have any idea of what's
going on?
Thanks in advance.
Why video? verify that u r connecting in the right place. try in the cd input.the cable is ok? try a new set
.

Weird USB sound when connecting my iPod

Similar Messages

Maybe you are looking for