Weird video message

I recorded a video on my iPhone 4 but when I tried to replay it it displayed the message "This video format is not supported". What should I do.

Already did at least 5 times.I also folowed the video link you sent me (thank you) and noticed that instructions are different for windows OS!! For windows I am actually instructed to keep the ipod connected until it shows up on itunes. This is when I get the same error I got prior to restoring (ipod in recovery mode). When I press ok it says do not disconnect on the Ipod display.
BTW I cannot see my ipod in my computer either.

Similar Messages

  • New Video Message Virus

    Synopsis of my day:
    I received the following message from my friend today
    (friend's username) has sent you a video message!
    You can view your Skype video message at [REDACTED for safety]
    (Ignore this message if this was caused by an internal error)
    Unfortunately I did not recognize the above site as malicious.
    The site prompted me to log in, and i inputted my username and password.
    (Note: I just changed my password so I should be safe in that respect now)
    Next it downloads a file.
    (your username).zip
    Inside is a large videomessage.exe file.
    Upon opening it, nothing happened.
    At this point I (falsely) believed I was safe. Just to be sure, I ran a scan with my antivirus.
    Unfortunately, a few minutes later my scan was interrupted and...
    My screen flickered and a windows 7-ish screen showed up displaying some message and I heard some alarm warning noises.
    As soon as the weird things began, I shut my computer off.
    A while later, I decided to turn my computer back on.
    Everything seemed to be normal, and it started with no problems.
    I then logged in as a Guest to be safe?
    I attempted to resume my antivirus scan.
    (I use Malwarebytes Anti-Malware. They have a security component "Chameleon" which saved me. It seems the virus blocks most anti-viruses)
    After scanning, I logged into my main account and everything was back to normal. I deleted the files (username).zip and videomessage.exe, and I'm posting here for others who have encountered the same problem.
    CPU DETAILS: toshiba s855-s5378 Windows 8.1 x64 processor

    had the same thing happen to me this morning, then went searching through my computers internal files to see if i could find anything possibly hiding from me

  • Audio in video messages does not work

    When I record a video message for someone, the audio does not work properly. It either doesn't work at all (silence is recorded), or cuts out after a 1-2 seconds. The problem seems to be confined to the MP4 video/audio encoder used by Skype for video messages.
    My webcam (Logitech HD615) works properly when used for Skype calls (including the built in microphone), and when used in other applications. With other applications, I can also record videos and the audio is captured and encoded correctly. Although the problem does not seem to be the webcam, I have re-installled the webcam drivers and I have tried changing USB ports for the webcam.
    I have re-installed the latest version of Skype and verified that Windows has the latest updates (I'm using Windows 7).  I have tried re-booting a number of times when debugging this issue.
    I have looked at the mp4 file that's created in the temp folder when Skype records the message - the audio is missing/broken regardless of what player I use. This, and the fact that the webcam works makes me believe that the problem is in the Skype use of the audio/video encoder, or the encoder itself.
    Any ideas on how to solve this problem?
    Thanks,
    K.
    Solved!
    Go to Solution.

    When you change the USB ports, make sure not to use USB 3.0 ports. I had a very similar issue with Logitech c920 webcam. Changing the port to USB 2.0 has solved the issue.
    http://community.skype.com/t5/Windows-desktop-client/No-sound-on-video-messaging-playback/m-p/274382...

  • I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Where can I find a video message recorded using Skype on my iPhone 5?

    I recorded a video message in Sype and would like to forward to someone else.  I am hoping that since I used my iPhone to record the message that the message would have been saved somewhere on my phone.  Thanks for any help or suggestions.

    setting-phone-call waiting
    if its not there call your carrier
    Peace, Clyde

  • Using my ichat to video message non-MAC users

    I have a macbook and have two (remote) family members who use Windows OS'. We are all new to video messaging but I have been impressed with what the short goes I have had on ichat.
    Can anyone recommend any (video) webchat software that my family can download that will allow them to chat with me on ichat. I want to avoid downloading any additional webchat software given how good ichat seems. Needs to be free and easy to install.
    Thanks

    PC setup for AIM(to talk to iChat) http://www.mvldesign.com/videoconferencetutorial.html#xp
    Talking to a PC you might be better off using Skype.
    Mac version http://www.skype.com/intl/en-gb/download/skype/macosx/
    Pc http://www.skype.com/intl/en-gb/download/skype/windows/
    Or web based http://www.mebeam.com/

  • Why can you not leave a video message with Facetime?

    Would love to be able to leave a video message for the person I'm calling on Facetime if they can't answer.  Is this possible?

    You can send email to anyone.  Messaging (I'm assuming this is what you are talking about--the other party MUST have IOS5 on an Apple device) is different.  Think of it as an add on or a plus.  It means you can message with someone without using your texting allowance on phone for example.  Face time is also Apple to Apple because its an add on.  Otherwise you can use Skype for instance--and I don't quite understand what you mean about using it for email.
    Email is totally usable for any email address.   I've been emailing all over the world with Ipad for a year and 3/4.--same as emailing from any computer or phone.  I just think you are misunderstanding face to face and Imessaging as opposed to regular email.

  • Weird video display in FCP but normal in QT

    Okay, this is getting really tiresome now. Final Cut Studio has become weird on an Intel Core Duo iMac. When the symptoms first appeared FCP would not launch at all. It would quit on startup with a window to send a report to Apple. On that occasion I trashed and reinstalled the entire FC Studio.
    Following this the application opened so I assumed everything was OK. But then I went to import some AVCHD clips and FCP displayed the video with some weird looking semi-negative, metallic crappy special effects look. So ... I replaced the OS and reinstalled FCP Studio. Everything worked OK.
    Now, a day later, I go to import some more AVCHD clips and we are back to the weird video. Yet the same file opens normally in QuickTime. There are two screenshots of the same frame to illustrate this. One from FCP and one from QuickTime.
    http://grazer.free.fr/webstore/1_FCP.jpg
    http://grazer.free.fr/webstore/2_QT.jpg
    Has anyone seen this before or have any ideas because I am not going to devote another ten hours to reinstalling the poxy thing?

    Hello again Michael,
    Camera files are imported with Log & Transfer from SD cards with the AVCHD camera, P2 cards from the Panasonic HPX, from archived files of the complete card contents or imported from existing Capture Scratch files.
    The point is that the MacBook Pro behaves normally and the iMac used to. I have no idea why the same version of FCP on the iMac has suddenly become strange. Even stranger is that after reinstalling both system and FCP it all worked correctly and shortly afterwards the same weird stuff started again.
    Also, as mentioned, the Capture Scratch QT.mov file that FCP creates following a Log & Transfer reads normally with QuickTime - and iMovie - on the iMac.

  • Using Site Content and Structure unable to move documents,pages and getting weird error message

    Hi ,
    earlier we are moving a page ,document from one site to another sub site with in the Site Collection.
    Now,we are getting a un-readable format error.
    After selecting the destination we are getting the error.
    and the file can't move.
    What might me be the error.
    Expecting answers related to my question.
    1.As we can do using Internet Explorer,
    2. Using Send To also we can move.
    Using this Site Content and structure we can maintain Versoining also.
    If any one face the same issue then we can easily find out the solution.
    Regards ,
    Prathap 
    SP Developer
    Specify the destination to move the items you selected.

    Hi,
    Using Site Content and Structure unable to move documents,pages and getting weird error message
    We are getting Below error:
    When Moving Document items from one site to another site in the same site collection using Site content and structure(But it's working in same site,we can move documents from one library to another library)
    1576|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|cccccccccnncnnnnn|

  • Weird error message using phone as iPod

    When I plug my iPhone into my car's iPod connection cord (which works fine with regular iPods and does not cause regular iPods to display any weird error messages), the iPhone says something about how "...that accessory does not work with the iPhone..." and asks me whether I want to switch to airplane mode. In spite of this weird message, I am able to play my music via the usual method in my car. Weird. Remedy?

    Actually Human,
    Many iPod accesories were not designed to operate in close proximity to a GSM phone. The iPhone is a GSM phone. There is a program for iPod accessory manufacturers to test and certify their accesories for use with the iPhone. This article contains more information:
    http://docs.info.apple.com/article.html?artnum=305766
    That being said, many will work without going into airplane mode, some will get interference from the GSM signal that will come through as a hum or sometimes popping noise. Since sending and receiving the GSM signal is needed to make calls, the iPhone can't be shielded to prevent interfering, the accessory needs to be.
    This article contains more information on potential interference:
    http://docs.info.apple.com/article.html?artnum=305662
    The short answer is the car adapter may work without going into Airplane Mode, or it may have interference from the GSM signal at times.
    Hope this helps,
    Nathan C.

  • Weird error message on Adobe Reader XI installation.

    I've just downloaded Adobe Reader XI and started to instal it but get this weird error message:  "The ordinal 459 could not be located in the dynamic link library urlmon.dll".  What does this mean and what can I do about it?

    Hi EbSax,
    Please try out the suggestions mentioned here - http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459 -could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a
    ~Deepak

  • Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

    Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

    Probably a good question to ask Viber or look at their support site.

  • Video Message not Sending

    I sent my friend a video message, and for the past 24 hours it has been stuck at 99% and simply wont send.  There has been no error message.  I tried restarting Skype and restarting my computer.  Now, the icon has even turned black and I'm starting to think it isn't even on the Skype server or anything... Also, is there any way for me to view the video while it's sending?
    Attachments:
    Screen Shot 2014-05-27 at 8.18.47 AM.png ‏17 KB

    Ok so I found a way to send the video message.
    For Windows users, follor this guy's tutorial.
    http://www.petri.com/save-skype-video-messages.htm
    For Mac users, the porcces is similar but finding the files can be a bit more difficult if you dont know exactly what to look for.
    Start by downloading http://sourceforge.net/projects/sqlitebrowser/files/sqlitebrowser/3.4/sqlitebrowser-3.4.0.dmg/downlo...
    We will use this program to open main.db which is located here: /Library/Application Support/Skype/*your skype username*/main.db
    Open sqlitebrowser and drag the main.db file into it.  This file contains all of your chat history.
    Next click the "Browse Data" tab at the top.  Select the "Table" dropdown menue and click on "VideoMessages". This will essentially give you a spreadsheet of all of the information for every video messege you have ever sent or recieved.
    Scroll to the right and find the "author" collumn. Use this and the "creation_timestamp" column to help locate the video message you were trying to send.
    Once found, you can see, in two other columns, the "local_path" and/or the "vod_path".
    Since we are trying to resend a video message you created, we are going to use the local path.  Double click on this.  A window should appear with the path highlighted.  However, we need to deselect the actualy .MOV file name. do this, then press Command-C.
    Go to "Finder", "Go", and then "Go to Folder" and past the path into the text box.  Press enter and the folder in which your video message is stored will appear.  Reference the sqlightbrowser to find the exact name of you video message, and then copy your .MOV file to a more convenient location.  You can then go back to skype and send the video message as a normal attatch ment.
    Voila! You just resent your video message.
    Regards,
    [Removed for privacy]

  • Video Message - brightness issue which needs resol...

    Hello
    I am currently running Skype 6.5.0.158 and using a Microsoft LifeCam Studio webcam. When using my webcam for normal calls, or even checking the Tools -> Options -> Video Settings, then I can see my picture perfectly fine - colours are vibrant etc.
    However when I use the Video Message feature I see a very dark picture. It's like the brightness has been turned down. My room has all the lights on and there is a fair bit of light coming through the window. I've tested this with a Logitech webcam (not sure of the model) which appears to work without error.
    Please see attached document with examples. And yes, I know it's a Shrek soft toy and that my webcam is in mirrored mode at certain points.
    I look forward to hearing from you.
    Thank-you.
    James
    Attachments:
    EXAMPLES.jpg ‏364 KB

    I don't have that problem, but using the model before that one, I can tell you the camera settings can easily cause the issue.  Microsoft Lifecams tend to have a "truecolor" option and several other "auto" settings.  The best thing to try is to go into the "Video settings" - "Webcam Settings" in Skype and try toggling the settings and moving the sliders to a point where the video appears bright enough to you. See attachment.
    I do know that the overlay software that comes with the camera does not work.  You could also try 3rd party virtual camera software like "Manycam" (Manycam.com).  I have used that software and selected the Manycam Virtual Camera dropdown in Skype to be able to use the overlay software and the Manycam software to add even more overlays successfully.  You may also have better luck controlling the brightness in Manycam, if it doesn't seem to appear properly without it.  Be aware when Manycam is running, the normal Lifecam drop-down will not work, until Manycam is closed.
    Attachments:
    Webcam_Settings.jpg ‏74 KB

  • Video Message Issue

    Hello, guys! I have a bit of an issue with the new video message feature of Skype. That is, the option to send a video message is grayed out on every contact I have on Skype, but my friends can send me video messages and I can view them without any problems.
    Skype version: 6.21.59.104 (searching for updates yields me that I have the latest version of Skype)
    Operating system: Windows 7 Home Premium Service Pack 1 (100% legal)
    Camera: Turbo-X 1080P Full HD with built-in microphone (functions perfectly during video calls)
    Internet Speed: Average of 100Mbps if I remember correctly. Fairly fast and functional 100% of the time (I don't know if it is relevant)
    Note: I have no Facebook or Live contacts on my contact list. I do not log in as Invisible. Some of my friends do, but the option is grayed out for everyone, not just those that are Invisible. The only personal modification I have done for Skype is to block the advertisments by blocking access to apps.skype.com through my Control Panel.
    Solved!
    Go to Solution.
    Attachments:
    video message issue.jpg ‏22 KB

    Wingmom23 wrote:
    It seems that everything you are telling me to do about video messaging is not working.   Even going to the Help, About to check for the latest version of Skype is not working.   I downloaded the latest version just in case.   I want to send a video message but the instructions tell me to 1. Click on the contact and then 2. Click on the plus sign.   When I click on the contact, I do not get a plus sign.   I get a dialog box that has a paper clip beside it.   I click on the paper clip and it has the "Send Video Message" there.   I click on that and Skype tells me there is a problem.   What do I need to do?
    Help please.    Thank you.
    Most likely you are on the new Skype version with a different design of user interface.
    http://blogs.skype.com/2014/12/18/here-are-the-skype-for-windows-layout-changes-that-you-requested/
    Please,  run the DirectX diagnostics tool (32-bit option).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

Maybe you are looking for