Weird video when switching webpages...
I installed Snow Leopard last night and so far, it seems to run fine and perhaps quicker than Leopard. However, when I load a webpage, I momentarily get a blank page with vertical lines which quickly devolve into the requested page. On balance, the pages seem to load much faster so I'm not complaining. Looks more that a minor video problem. Anyone else notice this?
I am afraid it is worse than that. I have the same video glitch. I also have major Flash web site crashes and video issues. On FaceBook, a program called FarmTown is totally unusable. All the pull down menu text are missing as well as on the static main screen. Same in Firefox as far as FarmTown goes. All worked fine before. All that reported before had 24" iMacs.
Similar Messages
-
Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?only $99, i thought it was closer to $175.
-
Weird behavior when switching from windows to mac
I encountered a very strange behavior that I thought all of you should be aware of, and maybe one of you has an answer for me.
Let me begin by saying I have a MacBook Pro with a 24GB windows partition.
I was working in windows and I restarted to go into mac. The typical mac login window then appeared and I typed in my password as usual. Once my desktop, menu bar, and dock came up, the dock and menu bar disappeared almost immediately, and then it would go back to the mac login window. It would repeatedly do this no matter how many times I logged in.
By the way, it might be important to add that I only had about 12-15% battery remaining.
Anybody know what's happening here?
If not, maybe I should notify apple?
Thanks a lot
p.s. I didn't know if this was a problem with MacBook Pro or boot camp, so I posted it in both forums. So don't get all upset about that like some of you sometimes do.OK now I plugged in and switched back to mac and it is working properly...
I think this is a weird problem... -
Is there a way to stop iTunes from automatically pausing videos when switching spaces in Lion?
I have some technical podcasts and iTunes U vids that I like to watch, but occasionally, I need to navigate away from the video to do something with another application... while listening to the audio of the video.
Every time I attempt this, however, iTunes stubbornly assumes that I no longer want the video to play since my focus is somewhere else. Frustrating! I've looked through preferences but cannot find a way to override this irritating feature. Any suggestions welcome.No, say I just downloaded the new Spoon album and want to listen to it while I'm looking around in the main music list at other stuff.
I'd drag the new Spoon tracks into my static playlist named "Now Playing"
By static I mean, not a smart playlist.
I could just as well decide to listen to a Genius mix or itunes DJ, or even a smart playlist such as genre=jazz.
Any playlist but the main Music playlist, so I won't have to deal with that annoying jumping around while I'm working with other tracks. -
4s wont switch over to video when camra on? Takes photos fine but wont switch over to video?
Hi tangier,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Take photos and videos - iPhone
http://help.apple.com/iphone/7/#/iph1e767793c
Choose a mode. Drag the screen left or right to choose, Video, Photo, Square, or Pano.
Cheers,
- Judy -
In Firefox for Android 27.0, if you play video in one tab and while it's playing you switch to another tab, the video gets paused. I want the video to continue to play while I'm viewing another tab (so I can at least hear its sound!).
How can I do that?
How can I prevent Firefox for Android from pausing video playback when switching to another tab?
Thank you very much.Hi hamid_ss,
Currently Firefox for Android does this by default with embedded players. Some sites go automatically to full screen too which may be what you are running into. Try it. -
When switching from HTC evo to iphone 4s on sprint service the attendant said all my music, photos, and videos would transfer after some time. Does anyone know if this is true, or has anyone had this issue happen to them? It has been 8 hours since the switch and only my contacts transferred right away.
Well i wouldn't see why your photo's, videos and music would trasnfer. As that is a android device, there is no way to have them transfer over the air to the iphone.
Contacts probably came from google. Your videos and such you would have to move them to PC then to the iphone. Same with your music. -
Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.
I've never had any problems with mine ever. The only freeze I've had was from a file I recorded on tivo, cut commericals out in movie maker and then re-encoded to the lowest possible bit rate that that zens nati've resolution supports. Try turning your sensitivity in the touch pad down. Sometimes if you have it up to high you may have a chance of doing that (although I have only had slow response, instead of a freeze by doing that).
You also have to compare to all of the other products out there: Ipod and Zune are a lot worse with pathetic little problems (annoyances). I didn't pay for tech support? -
Hello.
I'm having a weird video problem and I thought I'd see if anyone else has experienced it.
I'm running the MSI nforce board with an AthlonXP 1700+ with two Micron 256MB PC2100. Firmware 2.6. Windows XP Home Edition with SP1. I have a four-year old ViewSonic GT775 that I've always had good luck with.
I've been using the latest nForce 2.93 drivers since they came out and am running the 41.03 Detonator drivers. I've tried downgrading to the 40.72 with no change.
I run my desktop at 1024x768x32bit and what has started happening the past couple of days is that the image on my desktop will randomly squeeze in about a half-inch on each side. It will stay like this for a while and then randomly go back. It wouldn't be a big deal if it just stayed like this, but it randomly clicks back and forth. Changing the color depth or refresh rate does not affect it. Even shutting down and then restarting doesn't affect it. If it was squeezed when I shut down, it'll be squeezed when I restart.
Very weird. For now, every time it does it, I just use the monitor controls to resize the display, but it is annoying to have to do it. It seems like right before its going to switch, I'll see minor tearing.
Has anyone else experienced this? Could it be my monitor? I do have another computer at work and I could bring the monitor home. My experience in the past with monitors is that when they start to go, the colors change and the brightness dims and then they just stop working. My monitor today is as crisp and bright as the first day I bought it, so I think it's the onboard video.
Does anyone have any ideas?
Thanks!Your image resize problem sounds like a refresh rate problem to me. It looks as if your monitor cannot catch the correct refresh or follow the hi speed refresh you ask. It can come from either the board, the monitor or just a bad connection. I would tend to say the monitor, as it is getting a bit old.
Failures in monitor can come from diffrent parts. If it is the electron canon, you can see a lowering of the luminosity/contrast. Same for the high voltage grid. A problem on your deflection parts could lead to a color shift or distorted image. Here, i'd say it is a problem with your synchronisation signal. Try a degauss also. You may just have a shifty ground.
Frenchy -
Weird video display in FCP but normal in QT
Okay, this is getting really tiresome now. Final Cut Studio has become weird on an Intel Core Duo iMac. When the symptoms first appeared FCP would not launch at all. It would quit on startup with a window to send a report to Apple. On that occasion I trashed and reinstalled the entire FC Studio.
Following this the application opened so I assumed everything was OK. But then I went to import some AVCHD clips and FCP displayed the video with some weird looking semi-negative, metallic crappy special effects look. So ... I replaced the OS and reinstalled FCP Studio. Everything worked OK.
Now, a day later, I go to import some more AVCHD clips and we are back to the weird video. Yet the same file opens normally in QuickTime. There are two screenshots of the same frame to illustrate this. One from FCP and one from QuickTime.
http://grazer.free.fr/webstore/1_FCP.jpg
http://grazer.free.fr/webstore/2_QT.jpg
Has anyone seen this before or have any ideas because I am not going to devote another ten hours to reinstalling the poxy thing?Hello again Michael,
Camera files are imported with Log & Transfer from SD cards with the AVCHD camera, P2 cards from the Panasonic HPX, from archived files of the complete card contents or imported from existing Capture Scratch files.
The point is that the MacBook Pro behaves normally and the iMac used to. I have no idea why the same version of FCP on the iMac has suddenly become strange. Even stranger is that after reinstalling both system and FCP it all worked correctly and shortly afterwards the same weird stuff started again.
Also, as mentioned, the Capture Scratch QT.mov file that FCP creates following a Log & Transfer reads normally with QuickTime - and iMovie - on the iMac. -
Stor.e TV+ No Loader error keeps coming up when switching on
I have been experiencing continual problems accessing the hard drive. "No Loader" error message keeps coming up when switching on.
The so-called "solution" to this problem posted on this forum is to open up the box and fiddle with the cables. Whilst I have had some success with this method initially, dismantling the box 10 times a week is not on.
I tried something else in desperation.
When the No Loader message comes up, I switch the box off and on again from the remote.
After 2 or 3 times or so the HDD folder usually appears.
I have been doing this consistently now with great success. This however suggests that the No Loader error message is NOT a mechanical connector problem with the hard drive but (as usual) poor software (what else?).
Dismantling the unit is tantamount to switching it off for an extended period of time so may explain why this technique works.
Switching the unit on and off several times also solves the problem of the D folder not appearing on the network even though Win7 shows Store-TV-Plus as a mapped NTFS drive (but can't find the D folder).
See the similarity?
Another thing that exacerbates problems is the unit's poor ventilation. The first thing that happens with this unit is that the rubbish stick-on rubber feet fall off.
Whilst this may seem innocuous, the ventilation slots are underneath the unit and will be blocked if there are no feet. I live in a hot country so this device gets pretty hot and behaves even more erratically unless well ventilated.
Ideally keep it well away from other units and preferably sit it on a small box by itself with the vents underneath well exposed.
I also still experience problems playing FLAC and MKV files. The unit occasionally loses synch with FLAC files which generally otherwise play OK and locks up or causes loud bangs or white noise on the speakers (dangerous).
Some MKV files just don't play at all even though VLC plays them. There are a myriad other inconsistencies but these are the most annoying.
Is anyone else experiencing these problems or does anyone have any other solutions to prevent these problems?
I don't suppose we can expect another software upgrade from Toshiba? In your dreams, pal.OK, so I took the risk and updated the firmware of my Stor.e TV+ to the Noontec V8S latest firmware V3.0816.13_V8S from noontec website.
The update went fine without a hitch (took about 2 minutes from an old 256MB flash drive plugged into the back USB port of the unit, which I formatted before using), and some of the irritating shortcomings of the Toshiba firmware was solved. Samba worked in some fashion, but I was still not able to download songs directly to the Stor.e over wireless, which is the only other feature I currently need. The irritating remote control buttons were changed to the way any sane person would use them (I had changed my universal remote control to correct this, so would have to change the settings if I kept the updated firmware) The new firmware seems solid, but I DON'T USE THE VIDEO CAPABLITIES, so I can't comment on this.
One major drawback of this update for me is that the small display on the unit becomes much less readable. Seems like there is a problem with the font on the new firmware. I use my Stor.e exclusively as a flac music player, and since I don't have it connected to a tv the small display is crucial for me to select tracks or disks. I have 300+ discs, so the Stor.e is an excellent cheap media player which I connect to my HIFI system via a DAC.
I thus had to change back to the Toshiba firmware to correct this problem. Seems like I would still have to use USB to download music to the Stor.e when I buy new CDs. What a pity.
Incidentally, the new Toshiba firmware is very much like the old firmware, in that it lacks the capability to switch on Samba. In the readme Toshiba states that the new firmware fixes a network problem, but I think that this is probably the smallest issue most users have with the Toshiba firmware.
So, my advice to anyone having video, control or other issues with the Toshiba firmware is to flash to the Noontec firmware to see if it resolves their issues. If it doesn't one can always revert to the official Toshiba firmware as I did.
You do this at your own risk though, if you brick your unit don't blame me... -
i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
as stated, I am unable to view some videos in Firefox, but I am able to view them when I use Internet Explorer. How can I view all videos when using Firefox. Thank you.
That is Flash.
You do have the Flash player installed according to your More system details list, so Flash should be working.
*Shockwave Flash 10.3 r183
*http://www.adobe.com/software/flash/about/
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Lowlevel video output switch controls? Modulized, why?
Hi
Well, i use Arch on my laptop. And there is one thing, which makes me wanna jump on it. The Lowlevel video output switch controls kernel module. I need this activated in order to switch between the projector and my laptop, I have my finals soon so its important this works as it should.
Would it be possible to enable this module in later pacman-versions of the kernel? At the time beeing, I would have to recompile everything my self. Which I have yet to become successful at, something is always wrong. But I`ll summarize what I would like to do:
#Build a kernel with this option, choosing it from grub at boot-time. But still have the "pacman-version" in case i mess up somethings up.
NOTE I use luksEncrypted root, does this option do anything to the kernel? Since the installer asks if you need to boot from an encrypted volume. Just asking...
Anyway, can I just download the kernel source. Run make menuconfig, activate the Low level video output switch controls. Then -> make modules_install? And then copy the kernel-version over to boot, and use it? Or what else?
Thank you so much for helping, took me ages discovering this feature was disabled on purpose.sveinemann wrote:Nice, any idea when it`ll be in core? I cant risk having an unstable kernel, this is my work laptop <3
Not before next weekend. My best guess is next Wednesday or later. -
Weird error when clicking on instance- flow from the console
When I have heavy volume coming in for the bpel server(ex: hundreds of instances generated at a time), I see the following weird error when I am trying to see the instance flow from console:
Process state off. The process class "BugBAM" (revision "v2004_12_20__61032" ) has not been turned on. No operations on the process or any instances belonging to the process may be performed if the process is off. Please consult your administrator if this process has been turned off inadvertently.
I didn't do anything to the process to turn the state off. What does this error message mean?
Thanks, JennyI am assuming that you are using 10.1.2 beta 1. Is that correct? I am wondering if in that version there is a switch that turns a process off when a new version of the process is deployed (this would be a bug because the active process should only be switched to retired).
Next time you get this error, could you please go to the BPEL Console and check the state of the BPEL process.
We will try to trace the error message in the source code and try to determine if there are other circumpstances which would generate the same error code.
Edwin
Maybe you are looking for
-
PDFMaker 9.1, Excel 2003, Users can't save form data
Hi Everyone, I'm looking for some assistance with a problem. I created a new form in Adobe Pro 9.1 bringing in an excel template. The final product looked great. I had our IT department post it on our Intranet, and some individuals commented back t
-
Hi, y ipod touch has stopped Syncing to my G5 tower. Further after I updgraded the iOS on the ipod, NOW it will not Sync on the G5 cuz it's i'm using 10.5.8 and itunes 10.5.2. Since my last attempt to Sync to the G5, the iPod has erased al the apps,
-
Reg: internet explorer views for all Tcodes in ECC 6.0
Hi all, Is there any way to view all the tcodes in the internet explorer views in ECC 6.0? Thanks and Regards, S.Janagar
-
Hi, I would like to link to photos in museum mode. Can I do that, using to link to a photo instead of another note? It's possible to link to songs, so why not photos? Thanks, Beth
-
hi, i am from india, im using iphone3gs with ios5.1.1 .i want to update the same to ios6 or to ios7,but i couldnt find the software update option in my iphone,so plz help me how to update my software.