Weird wrt54g problem-can't access my own website

I maintain a website through hosting service go daddy. I use Frontpage XP to maintain this website. My computer is WindowsXP pro. I have the wrt54g version3 router with v4.30.5, Apr. 27, 2006 firmware. Now for the weird part, I can access all web addresses fine, except for the website I maintain. If I bypass the router, the website loads perfectly. If I have the router installed, the website doesn't load at all, or if it does load, it doesn't load correctly. I have tried resetting the router back to factory defaults,rebooting and praying. I have called both my ISP and Go Daddy and they both say I am having a router issue. I have called thre of my freinds and they are all able to access the website without any problems.
Any Ideas?
DR_K

Check the MTU on the Status tab. Open a command prompt and ping your website with a packet size 28 lower than the MTU. If your MTU is 1454 then 1454-28=1426. Thus type:
ping -f -l 1426 www.uawlocal1485.org
It should go through. Then try to increase the value in the ping by 2.
ping -f -l 1428 www.uawlocal1485.org
It should not go through. If the first one does not go through, you have to lower the MTU in the router. Decrease the value in the ping until you find a value that works. Increase that value by 28 and use that as MTU in your router.

Similar Messages

Updated to Lion and can't access my own website?

I recently update to Lion and now I can't access my own website, no matter what browser I use.
I can access the site fine from my work PC, but can't from home and this started after I updated to Lion.
Help?

Shawnnafromwa wrote:
I created it using Wordpress. It is hosted by Accuweb.
http://www.shawnna.org
I can't access my cPanel or just the website itself. I can't access the admin panel for the Wordpress workings either.
And it all worked fine until I updated to Lion.
Any help you can provider would be very helpful. My host is claiming they can access it fine so they aren't able to help. They verified my IP isn't blocked on their end.
And I can access it straight away in Safari.Do you have any anti-virus or third party programs, especially secrity related installed?
Can you access any other sites you regularly go to?
Is your Wordpress program up to date to be compatable with Lion (check developer's site)
Pete

Can't Access My Own Website when using TMobile phone as Modem

I am using my Nokia 5310 as a bluetooth modem through TMobile on my MacBook. When I try to access my own website, it redirects me to a address that says, "Great Success! Apache is working on your website..." and so on. However, when I disconnect the modem and use my airport bluetooth connection I can get to my site immediately. I've tried rebooting my MacBook, pulling the battery out of the phone, refreshing the browser, emptying the cache, all to no avail. I called Tmobile and got their "Tier 3" people who said it's not from their side but could not give me any real reason it's doing this. They reconfigured my settings to see if that would work but it didn't.
I can access all other sites but my own website. I tried Firefox and got the same conclusion.
If it's the computer why would I be able to get to my site when I use my airport? If it's the phone, why would I be able to access the site through the web browser on my phone?
Does anyone have any suggestions on how to correct this problem? Thanks in advance for your help!

Hi halacious, and a warm welcome to the forums!
Airport & Bluetooth are two separate Interfaces, so that is a bit confusing.
Where is this Website hosted? Locally on your own machine, or on the Internet?
Any Router involved there?

Can't access my own website and manage it using Safari!! Very annoying! _

If anyone can help me or give me an answer that would be great and highly appreciated! I am new to Mac!!!
I am having trouble accessing my own online shop as Safari doesn't support Java Script or something like that (i know nothing about it)? I can see it but once logged into the site to manage it, the buttons wont click (am I making sense?)
Even accessing Ebay is giving me trouble as well!!! Like I can't see what I am posting and how it looks in Ebay when writing up the description!! I have to use either Firefox or IE on another computer to write them and post them. I am really getting mad!!!! Can someone give me a solution??
Please I need help desperately!!

Hi
Welcome to Apple Discussions and Mac Computing
Safari does support Javascript. However, it's possible the coding for your Online shop is using a version of JS not compatible with Safari and possibly the Mac Platform.
To be sure Safari is set up to access JS content, go to your Safari Menu (next to the Apple logo in the upper left of your monitor)>Preferences (a short cut for preferences for most applications is pressing the Command and , keys). When Safari Preference opens, click on the Security panel (if you don't see multiple panels listed, click on the small pill button in the upper right of the Preference panel). Make sure the 4 WebContent boxes are checked.
Try your web site. If no success, post the URL of your web site here and I'll be glad to try it.
eBay is a different story. The site is not the friendliest for Safari due to their odd approach to site coding, especially for Sellers. From what others have posted in this forum, using Firefox is a better alternative when listing/posting product.
Safari is quite strict about following industry standards promulgated by the Web Standards Project. In part, this endeavor strives to create uniformity and better security on the Internet through specific guidelines for site coding.
Unfortunately, sloppy coding practices exist on some sites, creating functional challenges for browsers. Also, as Microsoft's Internet Explorer is used by a majority of PC owners (certainly not because it's a quality product), some web developers tend to code sites specific to IE without considering whether other browsers can render the content. Besides being very short-sighted, this type of work devalues the use of the Internet as a viable and secure structure for communication and commerce.
The good news about owning a Mac is the lack of viruses, spy and malware, and poorly constructed operating systems such as Windows Vista and XP. Working around Mac-bias, when encountered, is the primary challenge.

Updated to OSX Lion and about 3 days later I can't acces my own website

Updated to OSX Lion and about 3 days later I can't acces my own website from my computer, but it works on other computers. Using a java wordpress site, can't even access my admin panel. Anybody else have this problem. What might have caused this. Even tried reinstall Lion, no success

Shawnnafromwa wrote:
I created it using Wordpress. It is hosted by Accuweb.
http://www.shawnna.org
I can't access my cPanel or just the website itself. I can't access the admin panel for the Wordpress workings either.
And it all worked fine until I updated to Lion.
Any help you can provider would be very helpful. My host is claiming they can access it fine so they aren't able to help. They verified my IP isn't blocked on their end.
And I can access it straight away in Safari.Do you have any anti-virus or third party programs, especially secrity related installed?
Can you access any other sites you regularly go to?
Is your Wordpress program up to date to be compatable with Lion (check developer's site)
Pete

How do i open sites that require adobe flash? I can't open my own website, not to mention tons of other sites. It's ridiculous.

How do i open sites that require adobe flash? I can't open my own website, not to mention tons of other sites. It's ridiculous.

Flash is not supported on the iPad and never has been supported on any iOS device - and as Adobe have never managed to make a version of their flash player that works on iOS devices, and they have recently announced that they are stopping development on all mobile versions of it, it probably never will be.
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

I can't access my own files

I have been having a problem with my external hard drive, I think it is about to die, so I am in the process of copying all my files/folders to my wifes computer, which has a much bigger internal harddrive than my computer, but I have another problem besides the drive itself. I have run into this problem ever since running Vista, and thats the stupid security. Security isnt stupid, but you have to be a professional IT person to figure out the way Vista security works. Those stupid dialog boxes were definately NOT intended for the home user. I have files that I want to copy that aparently I dont have access to, even though I am the one who created them. I found an account named "Unknown Account (S-1-5-21......) that I am sure came from a user account that I had in a different incarnation of Windows Vista, and since have reinstalled. So I know where the SID came from, but because of that I am denied access to the files. When I try to remove that account, I am told that I cannot remove that account because of inherited permissions and I should disable inheriting permissions. When I untick that option, I am told that NO ONE will be able to access the files. When I go up one level, where the permissions are supposedly inherited from, that account isnt listed. What the helll? I want access to my files! What do I do?

Hi,
Thanks for posting in Microsoft TechNet Forum.
According to your description, for further troubleshooting, please help to confirm the following items.
1.     Is this issue occurring on your wife's computer during the process of copying files or on your own computer while running Windows Vista? Where are these files located?
2.     Does the current user belong to a group of administrators or a group of standard users?
3.     As you mentioned above that your external hard drive is about to die, it may be related to hardware defect. So could you please describe the symptoms in details?
By the way, I would like to suggest that you try to take ownership of these files then see if you can access them.
If you can’t access the external disk totally, try to take ownership of the hard drive:
1)     Click Start –> All Programs ->Accessories
2)     Right-click Command Prompt and select Run as administrator. If you are prompted for an administrator password or confirmation, type your password or click Continue
3)     Type: takeown /f filepath (Replace filepath with the location of your drive, example d:\)
4)     Press Enter, you will be prompted with completed successfully message.
5)     Type: icacls filepath /grant yourusername:f (Replace filepath with the location of your drive, and yourusername with your profile name)
6)     Press Enter, you will be prompted with completed successfully message.
7)     Then try to delete files in this drive and see if it works.
If it is just due to specific files and folders, try to take ownership of these files and folders:
How to Take Ownership and Full Control Permissions of Files and Folders in Vista
Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
Meanwhile, I noticed that an unknown account (S-1-5-21......) is kept on your computer. You may need to delete this account in registry first.
1)   Press Ctrl + R to run regedit, then press Enter.
2)   Locate to this item: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
3)   Delete the registry of this unknown account.
Note: Remember to back registry before any modification.
Hope this helps. Thanks.

WRT54GS & WMP54GS Can't Access Internet.

I have two computers and both are Dell. I have cable modem connecting to internet, which is connected by wired to the WRT54GS wireless router. The new computer is Windows XP and connects to the wireless router via ethernet (Wired Connection) and is able to access the internet without problem.
Here is where I have the problem. The old computer was running on Windows ME with WMP54GS wireless adapter and it worked. I've purchased and installed a Windows XP home over the Windows ME. Reinstall the driver for WMP54GS, manually reconfigured the settings for the Adapter using windows zero config. and is able to connect to the WRT54GS wireless router. I can share and print file over the wireless network with the new computer, but can not access the internet.
Any assistance is greatly appreciated.

if the computer has win xp sp2 , then go to teh command prompt and type netsh winsock reset catalog
restart the computer and check whether its online...
if not , go to the wireless network connection properties >> TCP/IP properties >> use the following DNS servers.... 4.2.2.2 and 4.2.2.3

You can't access your own content from the top menu anymore?

Apple made a monumental FAIL decision for me regarding the new Apple TV.
They really want to force feed their iTunes store to us so badly that they have now stripped all of your own content from the main menu.
No longer can you go to TV Shows and watch... well, YOUR TV shows. Apple buried all of your personal content a couple of menus deep. In fact, the entire Music category is Now gone! Unbelievable!
And I can't use album covers for a screen saver anymore? That was a great feature! i guess they don't want music associated with a TV device. Very bad decision in my opinion.
This unit is a step BACK, not forward.
Am is missing something? is there a way to get this content back to the front so I can easily access my stuff?

Frozo wrote:
Apple made a monumental FAIL decision for me regarding the new Apple TV.
agreed
They really want to force feed their iTunes store to us so badly that they have now stripped all of your own content from the main menu.
agreed. the appletv is now an itunes store device (with your own content as a side issue).
No longer can you go to TV Shows and watch... well, YOUR TV shows. Apple buried all of your personal content a couple of menus deep. In fact, the entire Music category is Now gone! Unbelievable!
agreed
And I can't use album covers for a screen saver anymore? That was a great feature! i guess they don't want music associated with a TV device. Very bad decision in my opinion.
agreed
This unit is a step BACK, not forward.
agreed
Am is missing something? is there a way to get this content back to the front so I can easily access my stuff?
you're not missing anything unfortunately.

Having Problems Accessing my own Website!

Hello there,
I had a very strange problem today. I run a website (http://jag35.com) which I hosted for free on Byethost.com
I usually access this from home no problems, for about a year now, today when I tried to call it on my browser (safari on an iMac) it timed out. Server didn't respond, so I thought my free host of course is down.
So to quickly test this I checked another site that I also host on with the same company under the same account (http://vdslruser.com) and that pulled up just fine, so I thought it was strange already. This lead lead me to check my Who's Online account, basically a small widget that tells you who's online at this moment watching your website (http://whos.amung.us/stats/n3u5yoc1plgi/) this widget tells me that there are people on my website, it even tells me which pages they are one, which makes this situation even more strange. Other can view my website, but I can't for some reason.
I immediately thought it was my computer of course. So I restart my computer, clear out my cache & cookies, flush my DNS cache on my computer, and I still have the same problem, all other pages seem to work just fine, except for my http://jag35.com domain. I tried the pulling the page on another computer at my house, same problem, then I tried a laptop, same thing. It's beginning to become even more strange.
So I restart my router and modem a couple of times, even reset all my settings to make sure the problem isn't there. Nothing, same problem. I sent out a twitter message to see if anyone else was having problems viewing my page, everyone says it's fine except for a couple of other people, I then asked those other people who had the same problem, which service provider they were using. Turned out they were both using Verizon.
I tried to ping the site and do a trace route and I just keep getting a timeout message, however I also noticed that I get a timed out message on most domains that I try to ping or trace route. I haven't come up with a solution of figured out where the problem is. I hope someone that's had the same problem came share some insight as to what might be a solution.
I have a feeling, I'm gonna have to change my free host, but I'm just hoping to understand the problem.

I tried to access your website using a Verizon FiOS connection and it failed. Running a traceroute suggested that the failure occured after the first hop that did not have "Verizon" in the server name.
About two hours later I tried and succeeded in accessing your website using a Comcast connection. It would appear that Verizon has a problem.
Just for laughs and grins I tried accessing your website using a Verizon DSL connection. Once again, the connection failed. Tracert showed the connection failing after first hop without "Verizon" in the server name. Are you starting to see a pattern here?

Reflection problem: can not access a member of class java.lang.IllegalAcces

package org.struts.ets.utility;
import java.lang.reflect.Constructor;
import java.lang.reflect.Field;
import java.lang.reflect.InvocationTargetException;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import org.struts.bean.FieldTrouble;
import org.struts.bean.GenericDAOBean;
public class DynamicObjectCreation
     public static void main(String... args)
          FieldTrouble ft = new FieldTrouble();
          try
               Class<?> c = ft.getClass();
               //Class<?> c = FieldTrouble.class;
               /*Class<?> c = null;
               try
                    c = Class.forName("org.struts.bean.FieldTrouble");
               } catch (ClassNotFoundException e)
                    e.printStackTrace();
               Field f = c.getDeclaredField("var1");
               //f.setInt(ft, 42); // IllegalArgumentException
               f.set(ft, new String("A"));
               System.out.println(ft.getVar1());
               // production code should handle these exceptions more gracefully
          } catch (NoSuchFieldException x)
               x.printStackTrace();
          } catch (IllegalAccessException x)
               x.printStackTrace();
}// If I put FieldTrouble.java in any other package than the current package I am running this code from. I get the following error:
java.lang.IllegalAccessException: Class org.struts.ets.utility.DynamicObjectCreation can not access a member of class org.struts.bean.FieldTrouble with modifiers ""
     at sun.reflect.Reflection.ensureMemberAccess(Unknown Source)
     at java.lang.reflect.Field.doSecurityCheck(Unknown Source)
     at java.lang.reflect.Field.getFieldAccessor(Unknown Source)
     at java.lang.reflect.Field.set(Unknown Source)
     at org.struts.ets.utility.DynamicObjectCreation.main(DynamicObjectCreation.java:35)
I tried all possible ways of creating class as:
Class<?> c = ft.getClass(); OR
Class<?> c = FieldTrouble.class; OR
               /*Class<?> c = null;
               try
                    c = Class.forName("org.struts.bean.FieldTrouble");
               } catch (ClassNotFoundException e)
                    e.printStackTrace();
Edited by: ..-__Kris__-.. on Feb 21, 2008 10:26 AM
Edited by: ..-__Kris__-.. on Feb 21, 2008 10:26 AM

Any hidden performance or memory issue here?
Let us consider an object:
public class SomeObject
     private String fieldA;
     private String fieldB;
     private String fieldC;
     private String fieldD;
     private String fieldE;
     //... say 50 declared fields....
     public SomeObject()
     public SomeObject(String fieldA, String fieldB)
          this.fieldA = fieldA;
          this.fieldB = fieldB;
// getters and setters..
}When I create an object using the constructor with only two fields initialized such as the following code above, and look at what is happening to other fields as shown in the code below, I see that they are also AVAILABLE, now this is important, but they are set to null. What I wanted to know was, if I created an object with many fields, as many as 50 (getDeclaredFields = 50), and used a constructor with only two input fields to initialize an object, I still have 48 other fields available but set as NULL's. When I create more than 100,000 of these objects in a list and send to a .jsp page, I am unable to understand if this has more memory load than when you use a list of another object which has actually has only two declared fields in it. Each of this new object will have only two declared fields, when I say getDeclaredFields() it would return 2.
This is where I am unable to figure out if this has anything to do with performance or memory, rather, what is the difference between the many possible ways you can initialize an object when there are too many fields which you probably won't use? Either create a new constructor with only two input arguments OR a generic constructor with all fields as input arguments but all those fields which you won't use assigned NULL's OR create another new object with only two declared fields
SomeObject someObj = new SomeObject("abcd","cdef");
          Field[] fields = someObj.getClass().getDeclaredFields();
          System.out.println("Number of available fields: " + fields.length);
          for(int i = 0 ; i < fields.length ; i++)
               try
                    fields.setAccessible(true);
                    System.out.println("Field " + i + ", with value: " + fields[i].get(someObj));
                    fields[i].get(someObj);
               } catch (IllegalArgumentException e)
                    e.printStackTrace();
               } catch (IllegalAccessException e)
                    e.printStackTrace();
          }Edited by: ..-__Kris__-.. on Mar 23, 2008 5:04 PM
Edited by: ..-__Kris__-.. on Mar 23, 2008 5:05 PM

Blocked From Accessing My Own Website CMS

Hi, I wonder if anyone can shed some light on an odd problem which arose out of the blue two days ago. I operate two iMacs (new types) on a network, with Leopard 10.5.2. We have ADLS broadband, and network using an Airport Express. I have several websites, one of which has a cpanel and is set up with a CMS on the server - to access this, I need to log in to the administrator using a user name and a password. On Sunday afternoon, while working in the CMS online, my admin session suddenly expired and since then I have not been able to log into my own website to work on it. Oddly, my husband's user name and password is also being blocked. Yet, even more oddly, when I log in using either username and password on my husband's iMac, there is no problem! The message from my website is that the username and password are incorrect. I have to use Firefox to work on my website, so after restarting my Mac, I emptied the cache on Firefox, deleted the passwords in key chain, and when none of this work I deleted my old version of Firefox and downloaded a new version. All to no avail. As my husband's computer is able to access the site, I assume that the Airport isn't the problem, but there is something going awry in my Mac. I have had my webmaster check that my Mac IP isn't being blocked by my website - which I think would exclude my Mac from accessing it - but she says everything is fine at her end. She is also not Mac savvy, so if the problem lies in my Mac she can't help. Can anyone suggest anything???

Have you tried clearing ALL private data? It's under the tools menu and make sure you check cookies and saved passwords as well. It could quite likely be pulling credentials from a cookie stored on your machine or from a saved password if FF does not use the keychain (I cant remember if it does).
As an extra troubleshooting test if this doesnt work, you could try either logging into another account, or if none is available create a temporary account to log into and test it from there. This would indicate a preference problem most likely and you could then clear the problem files from your home directory's library.

Can't access secure college website with 3.11 previously OK

I've been logging on as a visitor, once a week, to the Mount Holyoke College website for over a year without problem, but once I upgraded to Safari 3.11, I now receive a new warning, ""Can't detect hardware" which I've never seen before. Once I go through their registration process, I still get the same warning, and can't access anything on the Internet EXCEPT the APPLE.COM website. Is that weird or what? Nothing else has changed recently on my PowerBook except Safari (and other recommended Apple Software Update suggestions.) Last week I brought in a PC laptop/Vista, and logged on just fine. ;>) Their IT people claim it's a Safari/hardware problem.
How can I downgrade to the previous version of Safari, which worked just fine for me?

normal traffic uses http on port 80 by default
encrypted traffic using https is on port 443 by default
there are some sites that use different ports, but if you open 443 it should be ok for most
if you enable "personal web sharing" on the firewall tab it'll open those ports
non-default port numbers can be seen in the url, for instance...
http://www.port.com:8080/
...means http for this site is on port 8080 instead of port 80

I can't access this secure website with the new fireforx upgrade but I could before the upgrade.

As above. What can I say-I have tried everything listed on the support forum website. I had no problem accessing this secure website, which is my work email, before I upgraded to Firefox 4.0. I would prefer not have to go back to the previous version if possible. I don't like IE because it is just too slow, but right now I have to use it to access this website. I have windows firewall and have allowed firefox.exe as an exception. Any suggestions as this is very frustrating. Thanks

You should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac".

I AM NOT IN QUEBEC BROWSER SAYS I AM. THEREFORE I CAN'T ACCESS TO CERTAIN WEBSITE

I live in Toronto but When I access to certain website such as urbanoutfitters, clubmonaco.ca
I can't access to those
it says
Due to the Charter of the French Language, we are unable to offer our website to the province of Quebec, at this time.
please!! help

I too am in Toronto, and have no problem accessing the sites you mention.
What is your location shown as in System Preferences / Date and Time / Time Zone?

Weird wrt54g problem-can't access my own website

Similar Messages

Maybe you are looking for