WELCOME_CLAUSE is displayed instead of "Welcome portaluser" in portal

Hi ,
We are working with EP7.01. When logged into portal WELCOME_CLAUSE is displayed instead of "Welcome portaluser" in portal. Can anybody please help me in resolving this issue. Where do i need to make changes.
regards,
Sree.

HI Sree,
Looks like there is some problem in the masthead par. Check the code of it. If you don't have the par with you, download it from system admin->support->portal runtime->browse deployment.
Best Regards,
Sen

Similar Messages

Camera icon displays instead of Trash-Can upon selecting a message in the conversation

iPhone 5
iOS 8
Camera icon displays instead of Trash-Can upon selecting a message in the conversation and clicking on 'Copy/Speak/More...'
After restart, now it shows Trash-Can again.

Many were saying that you just needed to turn your phone off and turn it back on after upgrading to ios8.1, so that you could then delete single messages.
It worked when I did it the first time, but today while sending text messages the trash can disappeared while I was trying to delete some messages.
Any help would be greatly appreciated.

Interaction Record cannot be displayed, instead it gives an exception error

Hi Folks,
In the Web IC, when I click on "Interaction Record" in the Navigation bar, the page is not displayed, instead it gives an exception error:
Component ICCMP_BT_INR cannot be displayed
An exception has occurred Exception Class CX_BOL_EXCEPTION - Access Previously Deleted Entity
Method: CL_CRM_BOL_CORE=>GET_TRANSACTION
Source Text Row: 10
Can someone tell me where to correct this situation.
Thanks,
John

Hi,
please check this setting:
SPRO->IMG->Customer Relationship Management->Transactions->Basic Settings->Define Transaction Type
Define 0010 as default for IR.
Denis

'Add to favorites' feature: first slide of the article is displayed instead of the 'favorite' slide

Hi guys!
I've added some slides from different folios to favorites. When I navigate to the favorites list and tap on any item - the first slide of an article is displayed, but not the slide that was added to favorites.
Why the first slide of an article is displayed instead of the slide that was added to favorites?
Many thanks in advance,
Sam

Hi Bob,
Thank you for the answer!
May be you know if this feature is added to the wish list and will be implemented in the future releases?

My name is displayed instead of my publishing company's name......

My name is displayed instead of my publishing company's name for my books in iBookstore. I cannot find where to change it in iTunes Connect.
Any suggestions (besides opening a ticket)?

Best to put that type of question to your legal counsel, I think.
Ken

Who'sWho Off Phone number is been displayed instead of Offi email ID

Hi Experts,
Few users of our portal are facing the below issue in standard Who'sWho application.
Users search for their name and the application displays it.
But there is some data inconsistency as the Official Phone number is been displayed instead of Official email ID.
At the back end the data is maintained properly.
When the official phone number is not maintained at R/3 the application displays the email id correct.
But once the official phone number is update the system picks the phone number as email id.
Why does it happen only with selected users ?
how can i solve this ?
Please help.
Regards,
Sanjyoti.

hi,
I found out that there is no RFC which is called instead there is standard infoset query which is fired.
The name of the query is "/SAPQUERY/HR_ESS"
how shall I debug this query please help as I have not worked on it before.
The problem is not seen in quality portal.
Is it possible to create a request for the standard query and send it.
Regards,
Sanjyoti.

HT1338 Today when connecting my MB Pro Retina Display to my 27" LED Cinema Display instead of mirroring (which worked fine in the past) both screens are black with a large arrow cursor. I'm unable to resolve this. Anyone have a similar experience?

Today when connecting my MB Pro Retina Display to my 27" LED Cinema Display instead of mirroring (which worked fine in the past) both screens are black with a large arrow cursor. I'm unable to resolve this. Anyone have a similar experience?

I think what may be your main issue here is that the 2011
server has the Intel integrated HD3000 and is is struggling
to run both a Thuderbolt display and a second monitor.
When looking at specs for Thunderbolt Display, it is stated
that the 2011 Mini Server can only support one. Adding that
Dell monitor with 1920x1200 display may just be too many
pixels for the HD3000 to handle.
You may want to try setting the Dell to a lower resolution
to test the theory to see what happens. It is however,
possible that any additional monitor when using the Thunderbolt
display may over tax the HD3000 graphics.
FWIW personally, I have been running a 2011 Mini Server w/ Thunderbolt
display for almost a year now without any issues. However, I don't
use a second monitor.

Change the display name of the Profile Manager Portal?

Hello.
Does anyone know if it's possible to change the name that's displayed on the Profile Manager User Portal? It's using my server name and I'd rather it be something a little more generic? Is this possible?
Thanks,
Kristin.

Hello,
Currently, the Power View report doesn't support the drillthrough feature like "Go to URL".
Personally, I recommend you that submit a suggestion at
https://connect.microsoft.com/SQLServer/. Your feedback is valuable for us to improve our products and increase the level of service provided.
For more information about the features supported in Power View, please see
Power View (SSRS).
Regards,
Fanny Liu
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedback
here.
Fanny Liu
TechNet Community Support

Difference in the display/rendering between two 7.4 portal systems

Hi everyone,
At this moment we are faced with a difference in the display/rendering between two 7.4 portal systems (see red area’s in screenshots). Both systems are green field installations.
At our LAB system with EP-BASIS 1000.7.40.7.0.20140421205300 and EP-RUNTIME 1000.7.40.7.0.20140414131600 the portal is rendered as follows:
Our development system DEV is based on EP-BASIS 1000.7.40.8.7.20141217073700 and EP-RUNTIME 1000.7.40.8.13.20150106224500. The portal is displayed as follows:
Both portal systems use the standard SAP Gold Reflection theme.
The expectation was that the DEV portal would have the same view as the LAB portal. Unfortunately, it appears that the DEV portal falls back to the older standard SAP Tradeshow theme when displaying (for example) the Portal Content Studio or the UWL. Different stylesheets (CSS) are loaded. There is no unified rendering and in our opinion this is not correct.
SCN provides much information about the various rendering problems that exists in the use of Internet Explorer in combination with the SAP Portal. However, it is unclear to us where to start with the analysis of this problem.
Answers / suggestions to the following questions will be highly appreciated:
Is it correct that the portal by default should make use of UR when the SAP Gold Reflection theme is used?
Is the difference of rendering caused by the difference in the versions of the EP BASIS / EP RUNTIME? (DEV portal has higher SP/patch level than LAB);
How to investigate this issue further and finally solve it?
Thanks in advance!
Kind regards, Allan

Hi Allan
I hope you are well and many thanks for using the SAP Discussion Forums .
Ok firstly in relation to this particular query, you can find additional information in the following documentation SAP Note:1852400 - UI theme designer (main note) .
Regarding the GOLD Reflection theme from a general perspective this is supported only alongside the UFP framework.
SAP Gold Reflection supports only Unified Rendering Lightspeed
In relation to your two other queries. Could you kindly clarify which particular version of IE you are presently running and also if compability mode is presently enabled/disabled?
Reference Documentation Look & Feel, Framework Pages and Portal Navigation
http://scn.sap.com/docs/DOC-23058
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer
Follow - Troy Cronin

ABAP WD: Different display in Test window and enterprise portal

Hi,
I am using Table and TreeByNestingtable column in ABAP webdynpro(Basis 710 release). When I run the application using test, table captions are not in bold and there is no difference between TreeByNestingtable column and other columns in background color.
But when I display the same component in Enterprise portal using iview(EP 6), the table captions appear in bold and TreeByNestingtable column and other columns appear in different background color.
Has anybody encountered this issue? And how do we resolve it?
Regards,
Srini.

Please see OSS Note 903662 on restrictions and steps for running ABAP Web Dynpro in older releases of the portal. In particular you should disable the portal style sheet.

How can I display the holiday list in the portal

System
ECC 6.0
EP 7.0
ESS/MSS 1.0
how can I display the holiday list in the portal.
There will be a holiday list created by the ABAP-er in ECC, how can I include it in the portal?

Hi,
Create a WebDynpro Iview to create a simple application that pulls information from the RFM(that you has ABAPer created).
Start from <a href="https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#backend">Here</a>
(Or)
To get an idea, download the world time BP from below link. It has calender with holidays displayed.
http://www.sweetlets.com/world_times_preview.html
Regards,
N.

Edge displayed instead of EDGE

Hi, i've had my blackberry 8330 for quite some time now and I never understood why it always showed an "edge" instead of "EDGE" like it's supposed to.
I have the internet service activated; I can use the browser and use programs that require internet use. but could never active BBM or the provided instant messaging programs that came with my blackberry.
according to certain people, i'm not even supposed to be able to use my browser with the lowercase "edge" displayed.
So my problem here is that instead of "EDGE" i have "edge" displayed and i have certain internet capabilities but not all such as the use of BBM. I was wondering if anyone can help me with this before i start sending colorful emails to my service provider.
Thanks in advance!
Note: i have tried http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02623 and it has not helped me in the slightest bit.
Under "Services Status" it says "BlackBerry Internet Service: not connected and BlackBerry Enterprise Server: not connected"
and yet i still have limited internet functions. interesting.
Edit: http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB00510 has also been tried

Hi and Welcome to the Forums!
First -- Thank You for the detailed post including what you've already tried. You'd be amazed at the number of posts that start with "I've already tried everything" but fail to spell out what "everything" means, and we wind up giving advice on things that they've already tried (a waste of everyone's time). Thanks!!
It seems that you've tried almost everything...but please try this next (yes, I know that step 1 is redundant):
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If that fails to cure it, then you are most likely at Cause 2 of KB02623, which indeed requires contacting your carrier. With just lower case, you BB is "seeing" their network, but is not able to attach to it, which is therefore preventing you from accessing any services (including BIS and BBM) that ride that network.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Display Links on welcome screen of SC as per the role in PFCG

Hi All,
We have created a Z ITS service from a Z transcation and want to give the link of this ITS service on welcome screen of EBP only to some specific users.
We created a Z role in PFCG and attached the link of this ITS service using the option 'Generic Web Address (URL Template)' from the popup that we get on clicking Other button in PFCG .
How to check the role to display this link on the welcome screen?
We can not hardcode the link in ITS template because then it will be displayed for all users.
We can not use the Z transcation directly instead of calling the corresponding ITS service because then it also shows menu options on screen using which the user can access SAP EASY ACCESS menu from screen.
In PFCG it display under the Go Shopping folder:
BW_GENERIC_TYPE-Report
So how to check the role in ITS template and show the link only to specific users?
Thanks,
Anubhav

Hi Deepti,
Sorry for the confusing description.Let me explain in detail.
We have a Z report which should be accessible from a link on welcome screen of EBP.
For this we created a Z transcation of this Z report and selected Easy Web Transcation radio button and SAP GUI for HTML checkbox while creating this transcation.
Added this Z transcation in a role in PFCG .But the problem here is , when the link on screen is clicked and transcation is opened in IE it shows Menu , Save as variant , Back , Cancel and System options in header, using these user can access all transcations as if he is loged in to SAP from SAP GUI.
To avoid this we created an ITS service using this Z transcation and created corresponding service node in SICF .
So we either have to remove the menu options from header when this Z transcation is displayed in WEB GUI ie. when we attach this Z transcation in PFCG OR instead of calling the Z transcation , this ITS service should be called so how to attach this ITS service to PFCG ?
Further if it is a transcation we can check in the ITS Service BBPSTART Template BBPGLOBAL_650_EMP as follows...

repeat with idx from 1 to MENU_NODE_TAB-TEXT.dim;
if(MENU_NODE_TAB-S_IDENT[idx] == "ZBUSRP"); <--Here we check if the ZRole has ZBUSRP transcation attached to it in PFCG if yes then only display the link.
 A_S_IDENT = MENU_NODE_TAB-S_IDENT[idx];
 A_GEN_URL = MENU_NODE_TAB-GEN_URL[idx];
 A_OBJECT_ID = "parent.launchpad.menu.M" & MENU_NODE_TAB-OBJECT_ID[idx] & ".root.name + parent.launchpad.menu.M" & MENU_NODE_TAB-OBJECT_ID[idx] & ".path";
 A_TEXT = "Vendor Report";
 A_INTRODUCTION = "Business Card Report For Administrator";
 found = 1;
end;
end;
if(found==1);i=i+1;found=0;end;
How to apply this check when calling an ITS service that is in a role in PFCG?
I hope it is a bit clearer now.
Thanks,
Anubhav

Image display: instead of an image, there is a "picture placeholder" icon

Hello everyone!
I'm afraid I need some assistance. As I've already indicated in a thread title, I have problems while trying to display an image stored within the database. I read zillion threads here on OTN, searched the Internet, but I can't make it work. More or less, it comes to what Denes Kubicek provided [url http://htmldb.oracle.com/pls/otn/f?p=31517:64:850093673123067]here
Tools I use are Oracle 10g XE database (10.2.0.1.0) and Application Express (3.2.1.00.10).
There's a table that contains information about certain products (such as printer toners, cartridges, CD media etc.). This is its description:
SQL> desc pm_materijal
Name Null? Type
ID NOT NULL NUMBER
IDG NUMBER
SIFRA VARCHAR2(30)
SIFRA_KRATKA VARCHAR2(30)
MODEL VARCHAR2(30)
NAZIV VARCHAR2(255)
NAPOMENA VARCHAR2(255)
FILE_NAME VARCHAR2(200)
MIME_TYPE VARCHAR2(255)
BLOB_CONTENT BLOBOne of its records looks like this (other column values are unimportant) (columns are formatted so that they fit a single line):
SQL> select id, naziv, file_name, dbms_lob.getlength(blob_content) len
2 from pm_materijal
3 where id = 64;
 ID NAZIV FILE_NAME LEN
 64 CD recordable 1/50 Now I'd like to attach an image to those CDs.
In my Apex application, I created an item (on a page 7) whose name is P7_BROWSE (Display as "File Browse") - it is used to browse directories for files (images, actually). In order to support table record updating, I created a Process (Process point: On submit - after computations and validations).
if :p7_browse is not null then
 update pm_materijal set
 (mime_type, file_name, blob_content) =
 (select
 mime_type, name, blob_content
 from wwv_flow_files
 where name = :p7_browse
 where id = :p7_id;
 delete from wwv_flow_files
 where name = :p7_browse;
end if;It seems that it works OK, because - once I select an image (it is a JPG file, its size is 116 x 116) and push the "Apply Changes" button - the result is as following:
SQL> select id, naziv, file_name, dbms_lob.getlength(blob_content) len
2 from pm_materijal
3 where id = 64;
 ID NAZIV FILE_NAME LEN
 64 CD recordable 1/50 F477411270/cd_50_komada.jpg 2111 My next step was to create a stored procedure which will be used to display images:
SQL> create or replace procedure image_display (p_id in number)
2 as
3 l_mime varchar2 (255);
4 l_length number;
5 l_file_name varchar2 (200);
6 l_blob blob;
7 begin
8 select mime_type,
9 blob_content,
10 file_name,
11 dbms_lob.getlength (blob_content)
12 into l_mime,
13 l_blob,
14 l_file_name,
15 l_length
16 from pm_materijal
17 where id = p_id;
18
19 owa_util.mime_header (nvl (l_mime, 'application/octet'), false);
20 htp.p ('Content-length: ' || l_length);
21 owa_util.http_header_close;
22 wpg_docload.download_file (l_blob);
23 end image_display;
24 /
Procedure created.As suggested in a few OTN threads, I did this too (although I don't quite understand WHY, as I created the procedure in a schema I use in Apex; there are no other users involved). Anyway: I thought that it won't do any harm (but it didn't do any good either).
SQL> grant execute on image_display to public;
Grant succeeded.
SQL> create public synonym image_display for radni.image_display;
Synonym created.Back to Application Express: I created a Reports Region (Type: SQL Query). Its source is :
select
id,
file_name,
mime_type,
dbms_lob.getlength(blob_content) len,
'<img src="#OWNER#.image_display?p_id='
 || NVL (ID, 0)
 || '" height="'
 || 120
 || '" width="'
 || 120
 || '" />' image
from pm_materijal
where id = :P7_IDFinally, run the page! Reports region contains a single record which displays information I selected in SQL*Plus (so it seems that query DOES return something, and - I'd say that it is correct), but - instead of an image - there's an "invalid (broken) image" icon (you know, a small white rectangle with a red x).
I can't figure out what I did wrong. It should work, but it doesn't. Could someone, please, point me to the right direction?
Regards,
LF

Patrick said: specify your schema name instead of the #OWNER# placeholder
I said: while I was trying to make it work, I used "schema_owner.procedure_name" notation too but that didn't help eitherOracle user name is "RADNI" (the one I used to create objects, I was connected to it in SQL*Plus - all my previous copy/pastes were taken while connected to that user).
So I tried with
- <img src="radni.image_display?p_id=... => didn't work
- <img src="RADNI.image_display?p_id=... => didn't work
- <img src="image_display?p_id=... => worked
{code}
I just started using Application Express so, basically, every day I discover something new. I purchased a book (based on Apex 3.2) so I thought that I'd rather stick to it until I +get a feeling+ and then, hopefully, move on to a higher version.
By the way, looking forward to see you on HrOUG in two weeks!

In BeX only Key is display instead of Text in filter value

Hi,
Our company migrated from BW 3.0b to BI 7.0 Netweaver 2004s recently.
Before the migration, a value in the Filtersection of an executed query in the BEx Analyzer was displayed as text. Now after the migration it always displays the key instead of text.
If i put the same InfoObject in the Free Characteristics than it shows text like i choosed in the display section of the properties.
Do you have any clue why?
Thanks
Ralph

Wht FEP are you on??
Try to be on the latest SP available as a part of sanity check.
Try first to download latest FEP from service.sap.com/swdc
Download>Support Packages and Patches">SAP Frontend Components">SAP GUI FOR WINDOWS">SAP GUI FOR WINDOWS 6.40>Win32>Bw700SP09P_904-10001615.exe.exe
download that file rename as .exe and execute it.
Hope it Helps
Chetan
@CP..

WELCOME_CLAUSE is displayed instead of "Welcome portaluser" in portal

Similar Messages

Maybe you are looking for