Welcome-format site with sub-Welcome pages?

First off, here is an example of a "Public Features" site that has a link to a Welcome page with a section that has a course which opens a Welcome page:
Go to http://itunes.duke.edu/ and enter their "Public Material" iTunesU site.
From the "Public Features" root page, go to Topics->Business. This opens up a Welcome page for their Business school.
In the Groups section, click on "The Fuqua School of Business" course.
Result: A Welcome-style page opens.
Can I do the same thing starting from a Welcome page as my root page?
Here are the discussions I have found so far that seem to relate to my question:
http://discussions.apple.com/thread.jspa?messageID=6771208
http://discussions.apple.com/thread.jspa?messageID=7124237
http://discussions.apple.com/message.jspa?messageID=6032901

Never mind - I've figured out what I wanted to do by using the existing editing tools:
1. EDIT PAGE
2. Templates->Create Template... Of Type "Default Welcome"

Similar Messages

Edit button not working on a publishing site on sub-level pages only (SP 2010)

When I create a top level page, the Edit button/edit page works fine with checkout and checkin. However, once I create a sub-level page - that is I create a second page within the first page then the edit button does not work and there is a message
displayed on the ribbon in yellow background:
Status:
Published and visible to all readers
I have read all responses to similar posts and tried them but problem is not resolved.
I don't have workflow turned on, I don't have content approval, yet, issue is still there.
Please help.

Hi Wynnit,
Pinning will not work in most devices - desktop only. To do the same in your device layouts you need to use the scroll motion tools.
To add code to the <head> tags in Muse you go to your page properties and under the meta tab you will see a section you can paste your code.
When you do push live with Business Catalyst you will be given prompts as to how to go about it.

All I want is a 1 page site with a full page jpg as the site, and im stuck!

Yes, thought it should be simple. I have made a few left aligned pages before now and simple sites.
All I am trying to achieve is a webpage with a jpg on it.
I want the jpg to fill the screen and automatically shrink or grow to fit depending on monitor size, ie, 100%.
I have tried to do it with a table, but the image is so large that when i view it in ie on my 19 inch screen i have to scroll down and right to see the full image.
I have tried just setting the image as a background picture but the webpage dimensions are set too low i presume because it cuts off the bottom and right of the image and there is no optin to scroll.
Seems simple, but i'm rubbish, help appreciated.
The image is 1600 x 1200 to fit on large screens.
I just want a webpage which will contain the full image with no borders and which will reduce down proportionally to fit at 100% on what ever screen it is viewed on.
Must be possible?
Thanks.

hi, thanks for the example,
its pretty close to what i meant.
here is somethiing else i found which is kind of what i wanted to replicate.
http://www.russjamesdesign.co.uk/flash/flashsite.html
its basically a picture.
i think i should just make my jpg to fit in the middle in a table perhaps? and then colour the background to match the colour of the jpg ?
would this work for me?
i find it hard to believe or understand in this day and age and with all the complicated things you can do with a web design that dreamweaver or the web cant handle displaying a jpg at screen size on open of the page? seems like such a simple ask. when i click on a foto in windows it displays full screen etc. why can a web site do it easily?
anyway, thaks for the link..
could anyone give me a 1,2,3 step way of putting a pic in a table, making it sit in the middle and display at 100% screen size?

Not publishing entire site with all pages from site studio Designer

Hi,
I have created the site with one primary page & one secondary page in the site designer. I must admit that they don't have link to each other. When I publishing this site using Oracle Site studio publishing utility to a subscriber, it is publishing the primary page as index.htm in the destination. It is not pulling the secondary page. But i would like to get the entire site including the secondary page. What needs to be done to get the entire site. If you have any idea, please let me know.
Any help would be appreciated.
Regards & thanks,
Nirmala Vijaya Sekhar Varre

Hi
One way is setting a region in secondary as 'set replaceable' and geting ssURL from the code and link them in primary page.
Thanks
Srinath

Can A Site Have Multiple ABOUT Pages

Given the fact that iWeb's layout looks awesome if used in a 'singular' form - for one individual. What if I want to build a site with 'multiple' about pages, per say one for each client. Is there a way to have one 'about button' lead to a page with multiple buttons - that can direct a surfer to one specific page? In other words.
click 'about' -- next page 'multiple selections' -- click 'one selection' -- be lead to one 'about' page.

You can use the About page as a template and change anything you want. Add hyper links or let iWeb add the links ontop of the pages.
You'll be able to do what you want.
CaptM

Same content, two books each with its own page size -- best way to manage?

Does anyone have any suggestions for producing two FrameMaker books that:
Contain identical content that must also be periodically updated
Must be delivered as two separate PDF books, each book having a different page size
I'm familiar with migrating FrameMaker content from one page size to another: Create a new chapter template of the desired size, then import styles, etc., and content into that new template.
But IF one must deliver the same content in two different books, AND each book using a different page size (U.S. Letter and B5), AND the content is periodically updated and maintained, THEN what's the best way to manage that same content, two different page-sizes delivery problem?
PDFs are generated from FrameMaker 7 or 8 (we have both) via Adobe Distiller 9.
Cheers & thanks for your help,
Riley

Use three directories - one for the master FM document, and one "build" directory for each of the formats you need. When it's time to build, copy all the files into the relevant build directory and do your stylesheet applying, book regenerating, and printing in the build directory.
If you decide to handle it in FrameMaker (rather than Acrobat), then use two stylesheets - one with all the formats you need and letter-sized pages, and one with no formats and with B5 sized pages. This way you only need to manage one stylesheet for most formatting controls (except page layouts), and you only need to import the page layouts when you want to build a document or "toggle" it between different page sizes. How similar these two stylesheets are to each other (on the master pages) depends on how much you think you can get away with:
If the page sizes are similar, use different pages sizes but identical text frames on the master pages if you can. This would give you identical pagination although the margins would be different. You might be able to find an optimum "compromise" text frame size that fits both page sizes reasonably well.
If you can't use the same text frame sizes on the master pages, then of course your pagination is going to change, but at least try to use text frames that are the same WIDTH. This avoids needing to manually adjust side-head areas, pictures, and table widths every time you change the page size.

Two problems with iWeb welcome page

After some obvious struggling I was able to create a working welcome page with links to my homepages. I have two questions regarding the page:
1. First, the page does not fit the full screen when seen in Safari. It seats too small in the middle of a white background.
2. Second, more troubling, the page cannot be forwarded to my domain since the address:
///Volumes/frasecco8/Web/Sites/iWeb/Welcome%20page/Welcome.html, is not recognized by the domain.
What can I do about these two problems?
I feel I am very close to having a working website, with links, pictures, etc. but I am no quite there yet.
Thanks for any suggestion, advice.
Frank
iMac G5 Mac OS X (10.4.9) PowerMac G4

1) In iWeb, click on the inspector button (the blue cirle with an i) select the page tab. From there you can adjust the height and width of the page, as well as background colors. Keep in mind that screen sizes vary widely; try to choose a size that will work well on both smaller and larger screens.
2) I presume you mean that you are publishing to .mac but have a purchased domain name and want to forward from your purchased domain name to your .mac site? In that case the problem is that you are using the wrong url for forwarding. Try entering http://web.mac.com/frasecco8.
If that doesn't work, then try:
http://web.mac.com/frasecco8/iWeb/Welcome%20page/
I hope this helps.
Kabing

I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter

When I start firefox, the Firefox 4 welcome page always opens, along with my home page.

I have a mac, am running version 10.6. I recently updated firefox to version 4.0.1.
After updating to the new version, and restarting firefox, it opened to the "welcome to version 4" page here are all the changes, etc, etc, in addition to opening my home page in a separate tab.
However, it never stopped doing that. Every time I quit firefox and restart it opens two tabs: one with the welcome page, one with my home page.
In the General tab of Preferences it still lists my correct home page as the home page. I have tried changing my homepage to a different website and to a blank page, but whenever I quit and restart it again opens the two tabs (and the homepage gets reset in my preferences back to what it was).
Any thoughts??
Thanks!

See these articles for some suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Welcome page with out any password pop up

Hi All,
I have one req. that we have to make one BSP page in page with flow logic. And that page should not ask for any user id and password. Can you please help me out?
Thanks and regards,
Kuldeep Verma

Hello Kuldeep,
If the BSP application contains the Welcome page as well as other pages, you can achieve the goal through dividing the application into two parts: public part and protected part.
For example, for the Welcome page, you can create a page with name "public/welcome.htm", and for other pages that must be accessed with user authorization, you may create each page with name "protected/xxxx.htm".
In addition to the above, you need to create two independent services under SICF relevant node for the BSP application. As in example, one independent service is named "public", and the other is named "protected". For "public" serive, you need to specify a user that has limited rights; for "protected" service, you do not need to specify any users.
Please reward points if helpful!
Best regards!
Gordon

I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for comparability and the Welcome page opening every time I start the browser.

Windows 7 64 bit
I desperately would like to update Firefox to version 10 from version 9 but each time I try, I am stuck with FF10 checking addons for compatability and the Welcome page opening every time I start the browser. I continue to have to revert to version 9 to resolve this issue.

Sorry to be a while getting back! Tried all of that with no sucess so this AM, bit the bullet and deleted the FF folder from programs and downloaded and installed FF 10.01. Still was plagued with the same problem. Went into the appdata folder and there were two sessionstore.js files. Deleted them both, restarted the browser and no compatibility check for add-ons was done at start up and the extra tab for Welcome to FF was no longer opening Everything seems to be working as it should and I did not loose any of my settings.. Thank you for trying to help and I hope my solution helps anyone else who might experience this in the future. Here's hoping the next update goes smoother!

Can't change the color of text of links on my Welcome Page

I have a Welcome page with four links that happen to be text that I dragged over from my list of sites. I can change the text style and size but I cannot change the color from the default reddish brown.

To change the color of any hyperlinks, you need to select the link, go to the Hyperlink page, choose the Format option, and then select the color you want for Normal, Rollover, Visited and Disabled.
This should work.
You can also set the default colors and formats you want for all other entries on that same page.

IWeb welcome page design question

I am working on a web page for my company the company is divided into two sections. My question is this........ is there a way to creat just a welcome page with a link to one side of the company and then a second link to the other. THEN when you click on weither of those links you go to that part of the company and you do not see the other????
Basicly I want to host two web sites on one server but they share the same welcome page.
Please help.
Thanks

Most hosting services will allow you a fairly large number of sub-domains for each standard domain.
For example one of my accounts allows me to have 8 standard and 300 sub- domains.
You would create a Company website as the standard domain and then a sub-domain for each separate part of the company. The sub-domains are linked to the standard domains but are in separate folders on the server.
You can give people the URL for a sub-domain so that they can go straight there without having to visit the standard domain first.
The only time I had to do this I found it easier to build the standard domain and the subs as separate websites in iWeb so that I could load them one at a time and do updates without having to deal with the whole website.
This also makes the initial upload easier as well.
The first time I tried this I screwed it all up in my usual fashion and had to get the hosting service tech support to bail me out! It was a good learning experience.

Can't get back to root welcome page while logged in as administrator

Greetings all,
Something weird has occurred with our iTunes U channel. If I log in as primary administrator, I have access to the tools for creating dependent welcome pages. If I create a new dependent welcome page, and then click on the new welcome page to navigate to it and edit it, I get told "This page has no content. Click to edit".
Once I'm at this point (whether I edit the new page or not), I can no longer return to the root welcome page as an administrator. The "Back" button is greyed out. I can get back to the root welcome page as a non-admin user, for instance by clicking the name of my institution in the top right hand menu bar. This gives me an outdated root welcome page without any of the standard administrative links in the top right-hand corner, and there is no "Click to Edit" link.
In order to get back to the root page as an admin, I have to go back to the Admin login page in my browser, and go through the whole process of logging in again.
Has anyone had any experience with something similar happening to them? If so, how did you resolve the problem?
TKA for any assistance,
Erik Norvelle

After you resetted your router you should try adjusting the wireless settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuratioon...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation...
Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...See if you get the desired speed...If not you should un-install and re-install the wireless adapter...

The Counter on Welcome page is not showing up. How to find it?

Bottomest line is: My first Welcome page is not showing the Counter. I put a counter on it and nothing shows. I tried disassembling the page by lifting layers, and maybe I did it incorrectly, but I cannot find the errant Counter.
I tried going to the menu and de-selecting the Counter and then selecting it again, but that did not fool iWeb. It did not put a second Counter on my Welcome page because it knows that Lorna already put one there and it does not care that to the average non-Superman eye, it is invisible.
QUESTION:
How do I find that invisible Counter? What must I do, or do better?
— Lorna in Southern California

Is the welcome page the page with the big picture of
a flower overlaying everything, linking into your
site? Your page source does show a counter to be
present at location 34 pixels from top of page and 40
pixels from the left, but you have the picture over
it!
.......... Lorna says ................................................
Yes, that is the welcome page: the pink flower. What page source? How do you see a page source? Anyhow, I went to the Welcome page in iWeb and moved the pink flower picture to the side and out of the window. I see nothing! No Counter and no picture covering a Counter. The only picture I see is my pink flower picture.
It is probably still counting, but you won't be able
to see it. If you remove your picture (or make it
smaller) and republish you will see it.
.......... Lorna says ................................................
But I have moved the pink flower picture away and have cleared the field and see nothing. I did not make the picture smaller; if I can just push it out of the way, why would I need to make it smaller? (I suspect I am missing something here.)
Lorna in Southern California

Welcome-format site with sub-Welcome pages?

Similar Messages

Maybe you are looking for