"Welcome menu" in CE 7.1 Evaluation SP1

Hi!
A very basic question for you gurus. The very first time I started up the "Welcome Page" as instructed on the installation DVD I came to the menu with:
- Sample Applications
- Tutorials
But now I come to the page with "SAP Netweaver Application Server Java"
http://henand2:50100/index.html
Do you have the proper link that seem to be overwritten to the real "Welcome page".
Also - so far I haven't found the Visual Composer on the installation. Am I blind or do I need some further installations?
Best regards
Henrik

Visual Composer is installed as part of the "Composition Tools" option during the main CE installation (if you perform a custom setup, you'll get to a page in the installation where you can choose what you want to install - you need to choose "Composition Tools" to get Visual Composer, plus the other composition tools). I'm not sure whether this option is part of the default installation, or whether you need to select it specifically.
After it is installed, you access Visual Composer from your browser window as follows:
In the address bar, enter the URL of the Visual Composer server as follows:
http://<machine name with full domain>:<portnumber>/VC
For example: http://dwdf041.wdf.sap.corp:54000/VC
where dwdf041.wdf.sap.corp is the fully-qualified domain name of the Visual Composer server host, and 54000 is the application port number on the Java EE 5 Application Server in use by the Visual Composer Server installation. Note that VC is case sensitive.

Similar Messages

About Me link is not visible in Welcome Menu if placed on custom location in Custom Master Page

Experts,
I am facing a problem in my -ongoing SP 2013 project's branding. The problem is with Welcome Menu. I need to put the welcome menu at a custom place rather than in ribbon area. for this I added welcome menu snippet inside my Master Page HTML but there is
a problem with it. On ribbon link "About Me" is visible while at the same time link "About me" is not visible on welcome menu which has been inserted on custom place. below images describe my problem more accurately.
I need help in this regard if some one can help me. For your information My User Profiles are properly configured and working.
HBkhan

Hi Haris,
I tested the same scenario in my environment, and the link will display My Settings link instead of About Me link when there is more than one welcome menu in the page.
If you want to put the welcome menu at a custom place rather than in ribbon area, I recommend you remove the welcome menu in the ribbon area(suitebar) after putting the other welcome menu at the custom place.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How do I launch Organizer and Edit from the welcome menu of photoshop Elements 12?

I've been trying to get Adobe Photoshop Elements software to work on my computer since mid December. I've had alot of responses to different options, even from Adobe themselves, and nothing is working.
I get the Welcome Menu screen but when I click on either Organizer or Edit nothing happens. I am the administrator on my home computer and tried launching as administrator but nothing works.
I've tried launching it from "Program File" exe but nothing. When I do this I get this error message; "Windows cannot find 'C:\Program Files (x86)\Adobe\Photoshop Elements12\PhotoshopElementsEditor.exe'. Make sure you typed the name correctly, and then try again.
I've tried a Install Photoshop Elements in a simplified mode, nothing. I've shut down my firewall and virus program and then install, nothing.
Looks like I've stooped everyone. Now I can't even return it because the package is open.
Is there anyone out in cyber land that has a simple yet brilliant solution for me?
My computer is a 64-bit Operating System, Intel (R) Core i7 CPU, 869 @ 2.80GHz, Windows 7 Professional.
perplexed

If the executable is not being recognized you must have an incomplete or faulty installation.
I would suggest uninstalling via the control panel (Add/Remove Programs) and then re-install again from a different source. You can use the link below for the free trial (it’s identical) and if you get it correctly installed, simply use your serial number to validate and make the product permanent.
The link starts with the Adobe Download Assistant. You then browse to the photography programs to select PSE12 to start the download. After the download completes, installation should commence automatically but you may need to double click on Setup to start it off.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997

Help! my first mac! and I can't get past the Welcome menu window... I try to select "united states" and want to continue but nothing happens. Any idea why?

help! my first mac! and I can't get past the Welcome menu window... I try to select "united states" and want to continue but nothing happens. Any idea why?

Restart the Mac, and start over, it very well could be frozen. This is not the way you would like to start out your Mac experience!

Adding welcome Menu Box in custom webpart

Hi
i want to add the OOB welcome menu box in a custom webpart.
Am developing a webpart for adding in the master page which should have the default welcome note included. In default master page, i checked and it was having <wssuc:welcome> tag. I tried adding this tag in webpart, it is throwing error.
Please help me to add this in the custom webpart
Harikrishna Baskaran

this might help you .
http://blogs.msdn.com/b/richin/archive/2012/07/04/how-to-display-profile-thumbnail-photo-next-to-welcome-message-in-sharepoint.aspx
Thanks and Regards
Er.Pradipta Nayak
Visit my Blog
Xchanging

How to move user menu or welcome menu

How do I move the user or welcome menu to another location?

Hi,
Thank you for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
Best Regards
Dennis Guo
TechNet Community Support

Search in start menu don't work, Windows 7, sp1.

Hi guys!
I have this really annoying problem with my newly install Win7 pro, sp1.
The Start Menu Search doesn't work. All I get are 3 files that look like categories (Programs, Control Panel and Files).
The normal search , in file explorer, works though.
What I've tried so far:
I have enabled search in the Start Menu Settings. In Customize Start Menu I have enabled "Search with public folders" and "Search programs and Control Panel".
I have reset my search indexing several times. I have tried different registry tweaks suggested in forums like these like these:
http://social.technet.microsoft.com/Forums/windows/en-US/cc594db0-dbe8-4255-a259-5c1914318c3d/search-in-start-menu-stopped-working
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/windows-7-start-menu-search-not-working/1b0bf595-a246-4397-8d05-73e117f046fe?page=6
Non of these suggestions worked for me. I tried importing the registry keys below as suggested by some posts above:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}]
"CanonicalName"="StartMenu"
"Mode"=dword:00000001"
PerceivedType"=dword:00000000
"Theme"="default"
"MostRelevant"="prop:System.Author;System.Keywords"
"LayoutType"=dword:00000001
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}\TopViews]
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}\TopViews\{00000000-0000-0000-0000-000000000000}]
"Name"="NoName"
"Order"=dword:00000000
"GroupBy"="System.StartMenu.Group"
"PrimaryProperty"="System.StartMenu.Group"
"SortByList"="prop:-System.Search.Rank;-System.DateModified;System.ItemNameDisplay"
"LogicalViewMode"=dword:00000001
This also didn't do anything.
I can't find anything else online that addresses this problem. Now I'm getting a little desperate. I'm no novice when it comes to Windows. I have spoken to seasoned Windows tech support people (not from MS). None of them nor I have ever seen this problem
before. There is very not much help online. Can anybody please help pointing me in the right direction.
Cheers

Hi,
Anything recorded in the event log? You can check the event viewer.
Regarding to the index option you mentioned, verify that the Start Menu is in the list of indexing option, then check the selected location under indexed location of start menu
If possible, I suggest you create a new user account, then copy the old files to the new user profile, please refer to this link
Fix a corrupted user profile
http://windows.microsoft.com/en-in/windows/fix-corrupted-user-profile#1TC=windows-7
Yolanda Zhu
TechNet Community Support

Recovery Wizard missing from MDT welcome menu

I can't seem to get the Recovery Wizard to show on the MDT 2013 welcome screen when doing a PXE boot.
One thing I did want to clarify, if the client pc doesn't have a recovery partition is this why I don't get to run the wizard?
Im wanting to see the recovery wizard option so I can go in and run the DART Locksmith tools
MDT 2013
Windows 7
Dart 8
I thing I've tried everything and getting nowhere!

MDT uses a round about way to get the Recovery wizard to work in MDT Litetouch console.
THe recovery tools are not included by default in the WAIK, so MDT extracts these components from a working boot.wim from one of your OS install sources.
Can you do a dump of all the WinPE WIM files in question:
DISM.exe /Get-WimInfo /WimFile:C:\Path\To\Wim\winpe.wim /Index:1
Dump the boot.wim in your <deploymentShare>\Operating Systems\<OS>\sources\boot.wim
and the wimpe.wim under the c:\program files(x86)\windows kits\...\WinPE.wim
Both files must exist on your machine *and* they must be the same OS Version.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

SCCM 2012 SP1 - Software Center appears twice in Start Menu

Hi guys,
i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
are always in the same language.
The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
Has anyone ever seen this? See a screenshot below:
Thank you.
Cheers
Stefan

Thanks for your Response Thomas.
I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
was created when i captured my base Image, the other one was created during the Install OS Task Sequence.

Create menus to run projects (4-8 in a menu)

What feature in Captivate allows you to organize your
projects (SWFs) into a menu so users can step through the related
recordings one at a time (view, back, next). Please tell me it's
not Menu Builder. ;-)
I am evaluating Captivate 3 and am looking for something like
Camtasia Theater where you drop your projects into a menu builder,
sort them, title them, identify the links, and you are basically
done.
Surely there is has to be something like this for Captivate
projects. I've seen menus like this online using Captivate
projects, but they were definitely not made with Menu Builder. Is
there a 3rd party tool or other Adobe application that does this?
Captivate earns high marks for ease of use and generation of
recorded demos, but I don't want to get stuck creating clinky
website menus when a companion tool should do this in minutes with
polished results.
Thanks for any info.

The way I've been doing it is with hyperlinks in an HTML
page.
Here's what I do:
1) Publish your Captivate movies, and have Captivate produce
a HTML page for each movie.
2) Create a blank HTML page (i.e. in Dreamweaver).
3) Create a menu in the HTML page. Each menu item is a
hyperlink to each Capitvate HTML page.
4) Edit the style of the HTML page menu. I usually do all
edits in CSS, but you can use DHTML, images, etc.
I've created some menus that look really good using CSS,
borders, margins, backgrounds colors, etc. I've sometimes created a
<frameset> - so I do not have to reproduce the menu on each
page, and I load all the Captivate movies in one designated
frameset page.
You could also easily do this within Flash - and just link
Flash buttons to the Captivate HTML pages.
For navigation within one Captivate movie between slides - I
have a product called the .
Menu
Wizard.

Standard vendor evaluation t.code S_ALR_87012077

Hi,
In our system standard evaluation is all ready configured. When i am running program RFKKGRN it also updateing. But when i capmpared report from program S_ALR_87012078 with report S_ALR_87012077 i found that some vendors are not at all appearing in S_ALR_8012077. Also at gross level there is difference in amount.
What can be done so that those vendors to copied to vendor evaluaton sets?
Thanks

Hi,
in trcode OBAO we have as Program for data retrieve following program:
RFKRRSEL Create Evaluations for Vendor Information System
Program which supplies the data for the evaluation
Program for data retrieval. Data are transferred to all evaluations of this evaluation view which are selected to be recreated in the next generation run.
Procedure
If you define an evaluation view, enter a program for data retrieval.
Dependencies
How much data the program retrieves is determined by the selection variant in the Data retrieval variant field.
check also the details below:
No evaluations exist. See long text.
Message no. FE529
Diagnosis
You want to display evaluations from the accounts payable information system. You can only do this if the evaluations were generated as a background job.
Procedure
To activate the standard configuration (in order to gain an instant overview of the functions available in the accounts receivable information system) you must carry out the following steps:
1. Copy standard settings
This function copies the standard configuration. If the log thus generated tells you that none of the configuration (or only a part of it) was copied, this merely means that this function has already been called up, for example from the Implementation Guide. This has no effect on the following steps.
Proceed
2. Define data volume
In this step you define the volume of data you want to evaluate. You branch to the configuration menu and maintain the report variant that has been defined for the evaluation view you selected.
Proceed
3. Select evaluation
You must now define which of the pre-configured evaluations you want to generate. This function takes you to the configuration menu, where you select the evaluation to be generated. The selection field for this is roughly in the middle of the line.
Proceed
4. Generate evaluation
This function generates a background job. The ABAP program you need to run is defaulted in the job definition screen and cannot be changed. The only entry you need to make is the standard variant 'SAP_VARI' in the 'Variant' field.
After the background job has run, you can display the evaluation.
Proceed
For more information, refer to the Implementation Guide and the online help on the 'Financial Information System'.

ME6G - Vendor Evaluation in Background

Dear Gurus,
Can explain me this transcation ME6G - Vendor Evaluation in Background . How to execute this by steps?
Please advice me
THanks
Rs

Dear,
You can evaluate your vendors on a regular basis by means of background processing. The Evaluation in the Background function can be found in the Purchasing menu.
If you want to start a background processing request for vendor evaluation, you need a variant (to limit the number of vendors to be evaluated, for example).
Maintaining and Displaying Variants
When you invoke the Evaluation in the Background function, you can display existing variants in editing mode of the step list, and create new variants or change existing ones.
To do so, choose Edit Steps and then
Goto Variant (to display), or
Goto Variant maintenance (to create)
Procedure
Choose Master data - Vendor evaluation.- Follow-on functions - Evaluation in the background.
On the initial screen, enter a job name and the name of the variant. Specify when the background evaluation should take place and how often it should be repeated.
Save the background processing request.
You require certain authorizations in order to carry out evaluations in the background and define new variants. If you have any queries in this connection, please consult your system administrator.
If you require more detailed information about working with background processing requests, please refer to the documentation Getting Started with R/3.
Subsequent Maintenance of Background Evaluations
In background processing, you usually evaluate vendors belonging to the same group (that is, vendors who have the same weighting key). However, it is possible that you have selected an interval that contains different groups of vendors. For this reason, you have not entered a weighting key.
To ensure that the scores are calculated correctly, you must therefore subsequently maintain the weighting key for such evaluation records at certain intervals of time.
The evaluation records in question can be determined using the analysis report Vendors Without Weighting Keys.
This function can be found in the purchasing menu under Master data - Vendor Evaluation - Follow-on functions - Vendors without weighting key
From this report you can branch directly into the screens for maintaining evaluations.
Regards,
Syed Hussain.

"SAP Systems" selection not showing in SAPinst welcome screen

I recently purchased a NetWeaver Development subscription and am following the installation guide for SAP NetWeaver 2004s SR3 ABAP+Java on Windows with MS SQL Server. However, in the Welcome menu of SAPinst under the NetWeaver selection, I am not seeing the "SAP Systems" selection as it is described in section 4.3 "Installing a SAP system using SAPinst". I only see the selections "Standalone Engines", "Optional Standalone Units", and "Software Life-Cycle Options". Could someone please tell me how I can install a "Central System" on a Windows 2003 Server? Thanks.

Hi and thank you very much for quick reply...
We have also concluded that the note suddently is "gone"?
So the deal is to install a SR2 and then upgrade...Lucky i still have SR2 installs...
I wonder what the solution would be if we didn't still had the install files for SR2. And what is the official
reaction from SAP when installing SR2 win 32 bit for a customer, since the customer do not currently supports 64bit?
I have tried to talk the customer intto 64 bit, but no luck so fare
On the other hand if they have a large environment running WM ware, then it can be a big job to upgrade!
Thank you very much...

Removing items from the user menu

When users log in, they get a menu in the upper right corner of the ribbon that has their user name on it; the welcome menu. This menu has some items on it that I would like to remove because we have disabled "My sites" and because they allow unwanted
actions..
The buttons are:
My Site
My Profile
Personalize this Page
I managed to find the template welcome.ascx for the welcome menu in \14\TEMPLATE\CONTROLTEMPLATES\ and was able to hide the "Personalize this Page" item by adding visible="false" to the menu item template. What I can't find is the menu
item template for the My Site items. I'm not sure if those items are controlled by the menu template. I think they are controlled by turning off my sites in central admin. I say this because when I click on both menu items, I get a page not found error. I
think the files for those pages were removed rather than disabling my sites. Can someone confirm?

I would not recommend modifying the pages on the server directly. Any future CU or ServicePack could overwrite those changes. If you have backup of those please, you may refer it back.
And to hide those button, goto User Profile Service Application in Central Admin. You will find Manage User Permissions. There you can uncheck the following to disable the respective buttons
Uncheck Use Personal Features to hide My Profile
Uncheck Create Personal Site to hide My Site
Uncheck Use Social Features to disable Tagging, Note Board

Links not working in executable jar

I have a problem with my java application
html and images files do not work in executable jar
though the application works normally
I tried some suggestion but I received an exception thread indicating problem at
ImageIcon iChing = new ImageIcon(imageURL);
Please could you help me thank you so much
here is the class
public class Main extends JFrame
* objects required for the GUI: JFrame,JLabel, JButton, ImageIcon, JPanel,
* Dimension
private static final long serialVersionUID = 1L;
JButton jbEnter;
ImageIcon iChing, logo;
JPanel buttonPanel, ImagePanel;
JLabel jlbIching;
Dimension dim;
URL imageURL;
File fileName;
// Class constructor to create the GUI
public Main()
Container container = getContentPane();
URL imageURL = this.getClass().getClassLoader().getResource("src/myFiles/iching.gif");
ImageIcon iChing = new ImageIcon(imageURL);
jlbIching = new JLabel(iChing);
// button to go to the Title class
jbEnter = new JButton("Enter ");
jbEnter.setBorderPainted(false);
jbEnter.setFont(new Font("Edwardian Script ITC", Font.BOLD, 42));
jbEnter.setBackground(new Color(0, 0, 50));
jbEnter.setForeground(Color.YELLOW);
jbEnter.addActionListener(new ActionListener() {
// method to render the current frame invisible and trigger the
// Welcome Menu
public void actionPerformed(ActionEvent e)
setVisible(false);
// this line does not work...............
new Title();
} // close the actionPerformed(ActionEvent e) Method
}); // close the addActionListener(new ActionListener() method
// Panel holding the decorative image and Button
ImagePanel = new JPanel();
ImagePanel.add(jlbIching);
ImagePanel.setBackground(new Color(0, 0, 50));
buttonPanel = new JPanel();
buttonPanel.add(jbEnter);
buttonPanel.setBackground(new Color(0, 0, 50));
// setting up of the panels position
container.add(ImagePanel, BorderLayout.CENTER);
container.add(buttonPanel, BorderLayout.SOUTH);
dim = Toolkit.getDefaultToolkit().getScreenSize();
dim.width = dim.width / 2 - 300;
dim.height = dim.height / 2 - 250;
setBounds(dim.width, dim.height, 400, 400);
setSize(600, 500);
setResizable(false);
setVisible(true);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//To set the icon for the application. Top left hand corner.
//this.setIconImage(Image);
setIconImage(new ImageIcon("src/myFiles/ichingRose.gif").getImage());
} // close the Constructor
* the main method for the program.
* @param args
* The command-line arguments.
public static void main(String[] args)
new Main();
} // close the main method
} // close the Main class

Thank you very much for your quick reply and really hope you can help me a little more
it's so frustrating
I do not really know about the relative path but here is my xml file
<?xml version="1.0" encoding="UTF-8" ?>
<project default="jar">

<target name="jar">

<mkdir dir="ant"/>
<mkdir dir="work"/>
     <mkdir dir="ant/myFiles"/

<javac
debug="yes"
destdir="ant"
source="1.6"
target="1.6">

<src path="src"/>
</javac>
     <copy todir="ant/myFiles"><fileset dir="src/myFiles"></fileset></copy>

<jar
               jarfile="work/BookOfChanges.jar"
basedir="ant"
>

<manifest>

<attribute name="Main-Class" value="iChing.Main"/>
</manifest>
</jar>
</target>
</project>

"Welcome menu" in CE 7.1 Evaluation SP1

Similar Messages

Maybe you are looking for