Welcome message and engagement rules

Welcome to the Public Sector Forum!
Please see our <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki">Wiki FAQ</a> and use the search before you post to avoid duplicate threads.
You can find more detailed information on the <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement&">rules of engagement</a>, directly on the Wiki.
You can also choose to New Watches settings.
Happy posting!
The Public Sector community!

First, if this is response group call, just for testing, unselect Edge server from your Lync pool and try again.
Second, you have to remove old servers. If they are here, they could create multiple problems. Try the following commands to find objects that belong to the old pools:
Get-CsUser -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
Get-CsCommonAreaPhone -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
Get-CsExUmContact -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
In additions, check your conferencing directories.
Please “Vote As Helpful” and/or “Mark As Answer” if this post helped you.

Similar Messages

Nokia 206, Custom welcome message and ringtones?

Hi,
Is it possible to add a custom welcome message and custom ringtones to this phone? My wife had a Nokia Music Express 3330 (I think that was the model), the phone before last, but it went faulty. She had her own welcome message and a few custom ringtones.
If it is possible, how would I go about doing it?
Phone only arrived today.
Thanks,
Gerald

In the menu under settings is 'phone'. in there is the start up alert tone function. you can adjust this to off.
Im not sure if you can turn off the other tone alert mentioned in your posting.
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

Long delay between welcome message and agent picking up

Hello, when I call to to the lync client I hear the welcome text and music , but only after 25-30 seconds the call reaches one of the agents ??
in the snooperlog I see a sip /2.0 200 OK message and it takes about 15 seconds before another event happens, which is the invite.
What can this be ??
I moved a lync server from a hyper-v to a physical server, is anything still hanging around maybe ?
I don't see anything of it in the snooper log though

First, if this is response group call, just for testing, unselect Edge server from your Lync pool and try again.
Second, you have to remove old servers. If they are here, they could create multiple problems. Try the following commands to find objects that belong to the old pools:
Get-CsUser -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
Get-CsCommonAreaPhone -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
Get-CsExUmContact -Filter {RegistrarPool -eq "lyncpool.domain.local"} | Select-Object Displayname
In additions, check your conferencing directories.
Please “Vote As Helpful” and/or “Mark As Answer” if this post helped you.

Voicemail access request my ID, and i returns Welcome message

Hello when accessing the Voicemail extension of my own I am requested to enter my PIN and my ID,
I am performing the access to Unity through my own DN, found very strange Unity ask for my ID because it is should request this
only when I make my access to another phone.
After entering the PIN and ID, the system returns me the welcome message of unity, and I can not access my voicemail.
ome message of unity, and I can not access my voicemail.

Thanks George, after i restart my cluster CUCM, the Voicemail returnet to work.
This all right now

Filtered (rules) messages and mail ...

Hi ~
My screen name "never-mac?" comes from the fact that - as a 25+ year PC user - I said "I'll never get a MAC!!" Never say never!! I bought a MACBOOK for home (to avoid the VISTA experience,) and requested an iMAC for my new work computer.
All that being said, here's my "filtered" mail problem:
On my PC, I used Eudora for my email client; and, filtered messages would automatically forward to the selected mailbox. BUT ... when that happened, the appropriate mailbox would "open" on the status bar. Then, I could look at the message, and determine - immediately - whether or not to read it right away.
On my iMAC and/or MACBOOK, filtered messages are automatically forwarded and I hear a sound that I received mail. BUT, I have no clue which mailbox - of many, especially at work - has the "new" mail in it .... without searching every mailbox.
So, my specific question is .... Is there any way to tell Mail to highlight and/or open the mailbox that just received the filtered message?
Any advice that anyone can give me will be greatly appreciated!! I LOVE my new MAC's; but, "it takes a while to teach an old dog new tricks."
Thanks!!!

Hi “never-mac?”
Not sure what your problem really is. Unless you’re telling your rules to mark the messages as read, you should be able to easily identify which mailboxes have unread messages in them because they show the number of unread messages to the right of the mailbox name.
Also, you could set up a Smart Mailbox that shows all your unread messages, no matter where they are...

IPhone 4s and China Mobile "welcome message" issue

Hi there,
I've bought iPhone 4s and use it with China Mobile sim here in China.
I'm experiencing a very annoying issue that makes my new iPhone 4s almost unusable: every now and then (pretty often actually even several times a minute sometime) I keep on receiving a "welcome message" from China mobile on a black screen with "cancel" and "accept" buttons in the bottom (see picture)
The message says "Dear customer: thanks for chosing China Mobile, China Mobile wishes you a great success" (or something like that, I got it translated by a colleague).
The annoying part is that this message keeps on popping up continuosly and it actually interferes with the use of the telephone (e.g. if I'm using Siri and the message pops up, I have to start all over again and so on).
Strangely enough the message pops up even in airplane mode, with cellular data deactivated, with or without WiFi etc.
I called China Mobile and they told me to call Apple, I called Apple and they told me to call China Mobile.... Nobody seems being able to support.
I've been using iPhone 4 with the same SIM card until a few days ago and never experienced such a problem!
I must also say that the battery life of my brand new iPhone 4s is very short and I think it's because it keeps on trying 3G data connection (not available from China Mobile) that unfortunately cannot be deactivated anymore in iPhone 4s with iOS 5 (the option is still there with iPhone 4 with iOS 5). Network reception is also disappointing I presume for the same reason: if I could deactivate the 3G data (while keeping 2G data active) it would probably not happen.
I hope someone out there is able to help me.
Obviously I've been trying all sorts of resets (iPhone restart and reset, data connection reset etc.).
Thanks, ciao.
Stefano Bizzarri, Shanghai.

I haven't been back to China yet, but i did speak with Apple. Why Verizon couldn't have told me this is beyond comprehension. Apple said to Settings, then click on General, scroll down to and click on Reset then click on Reset Network Settings. Apple said that should do it at least in my instance. Unfortunately i haven't been out of the country to test it. I can't tell you how much this infuriates me about Verizon because i called them twice to check to see what to do and they told me no it should just automatically hook up to a new network. All i can say is Verizon Global Technical support was useless and they need to learn there product line.

Simple UCCX script for IVR,Welcome message then press 1 and press 2

Dear Experts;
I have uccx 10.5.
I want to write a simple IVR script as below.
Step-1- Welcome message.with press 1 for Sales and Press 2 for Marketing
step-2 User Press 1 then transfer the call to Sales Skill Group.
Step-3 User press 2 then transfer the call to Marketing Skill group.
My doubt is how to accept when user press 1 and match the value and then transfer the call to that skill group.
Really appreciate any link or script for this.
Regards
Debashis

Dear Martyn;
Thanks a lot that was very nice and valuable information.
just want to ask which palette i have to use to save the value 1 or 2 when user press 1 or 2.
I know using Menu we can create different Menu option.
After user press 1 it will go SALES skill group and if press 2 Go MARKETING Skill group.
Appreciate if you can help me in this regard.
Regards
Debashis

After updating to FF 20, the Welcome Message will not close, and there is no opt out.

this is maddening. After updating to FF20, each and every time I open FF the stupid Welcome message is permanently displayed in a tab. There is no way to opt out. You cannot close it. I have tried cleaning out cookies and cache to no avail. I even signed up hoping that would automatically close it, nothing. I am really really annoyed now. Is this a new feature of Firefox, forcing their messages to appear without any means of closing them?

You can check for problems with preferences and try to rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Auth.log - Rejected send message, 2 matched rules; type="method_call"

Hi,
i'm checking the /var/log/auth.log and I found out that there is this error message
Jun 9 20:19:56 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jun 9 20:19:57 localhost dbus[513]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=861 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=654 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jun 9 20:19:57 localhost dbus[513]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=861 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=654 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jun 9 20:19:57 localhost dbus[513]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=861 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=654 comm="/usr/sbin/console-kit-daemon --no-daemon ")
if think the problem is in /etc/dbus-1/system.conf
<deny send_type="method_call"/>
I'm tempted to change this to allow, but I won't as long as I don't understand why this deny-rule is implemented.
Last edited by miky76 (2012-06-09 20:41:06)

That deny rule is the default. Things in /etc/dbus-1/system.d override it. There's a ConsoleKit.conf file in there that describes what interaction ConsoleKit actually allows.
That said, ConsoleKit.conf also denies this access:
<deny send_destination="org.freedesktop.ConsoleKit"
send_interface="org.freedesktop.DBus.Properties" />
I don't know why this is denied - most likely it's to prevent private data from being stolen from console-kit-daemon in this way. I don't see any such private data stored in properties on ConsoleKit, though:
$ dbus-send --print-reply --system --dest=org.freedesktop.ConsoleKit /org/freedesktop/ConsoleKit/Session1 org.freedesktop.DBus.Introspectable.Introspect
method return sender=:1.5 -> dest=:1.14 reply_serial=2
string "<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">
<node>
<interface name="org.freedesktop.DBus.Introspectable">
<method name="Introspect">
<arg name="data" direction="out" type="s"/>
</method>
</interface>
<interface name="org.freedesktop.DBus.Properties">
<method name="Get">
<arg name="interface" direction="in" type="s"/>
<arg name="propname" direction="in" type="s"/>
<arg name="value" direction="out" type="v"/>
</method>
<method name="Set">
<arg name="interface" direction="in" type="s"/>
<arg name="propname" direction="in" type="s"/>
<arg name="value" direction="in" type="v"/>
</method>
<method name="GetAll">
<arg name="interface" direction="in" type="s"/>
<arg name="props" direction="out" type="a{sv}"/>
</method>
</interface>
<interface name="org.freedesktop.ConsoleKit.Session">
<method name="SetIdleHint">
<arg name="idle_hint" type="b" direction="in"/>
</method>
<method name="GetIdleSinceHint">
<arg name="iso8601_datetime" type="s" direction="out"/>
</method>
<method name="GetIdleHint">
<arg name="idle_hint" type="b" direction="out"/>
</method>
<method name="Unlock">
</method>
<method name="Lock">
</method>
<method name="Activate">
</method>
<method name="GetCreationTime">
<arg name="iso8601_datetime" type="s" direction="out"/>
</method>
<method name="IsLocal">
<arg name="local" type="b" direction="out"/>
</method>
<method name="IsActive">
<arg name="active" type="b" direction="out"/>
</method>
<method name="GetLoginSessionId">
<arg name="login_session_id" type="s" direction="out"/>
</method>
<method name="GetRemoteHostName">
<arg name="remote_host_name" type="s" direction="out"/>
</method>
<method name="GetDisplayDevice">
<arg name="display_device" type="s" direction="out"/>
</method>
<method name="GetX11DisplayDevice">
<arg name="x11_display_device" type="s" direction="out"/>
</method>
<method name="GetX11Display">
<arg name="display" type="s" direction="out"/>
</method>
<method name="GetUnixUser">
<arg name="uid" type="u" direction="out"/>
</method>
<method name="GetUser">
<arg name="uid" type="u" direction="out"/>
</method>
<method name="GetSessionType">
<arg name="type" type="s" direction="out"/>
</method>
<method name="GetSeatId">
<arg name="sid" type="o" direction="out"/>
</method>
<method name="GetId">
<arg name="ssid" type="o" direction="out"/>
</method>
<signal name="Unlock">
</signal>
<signal name="Lock">
</signal>
<signal name="IdleHintChanged">
<arg type="b"/>
</signal>
<signal name="ActiveChanged">
<arg type="b"/>
</signal>
<property name="idle-hint" type="b" access="readwrite"/>
<property name="is-local" type="b" access="readwrite"/>
<property name="active" type="b" access="readwrite"/>
<property name="x11-display-device" type="s" access="readwrite"/>
<property name="x11-display" type="s" access="readwrite"/>
<property name="display-device" type="s" access="readwrite"/>
<property name="remote-host-name" type="s" access="readwrite"/>
<property name="session-type" type="s" access="readwrite"/>
<property name="user" type="u" access="readwrite"/>
<property name="unix-user" type="u" access="readwrite"/>
</interface>
</node>
Note those properties at the end of that list, which are the same things you can learn by running ck-list-session.
If you want to change the deny to allow, you may as well do it in the ConsoleKit.conf line, so it's specific to this usage, rather than allowing any method call in the world called through dbus.
FWIW, I can reproduce this same error, trying to do it "by hand", though I don't use GNOME, as you do:
$ dbus-send --print-reply --system --type=method_call --dest=org.freedesktop.ConsoleKit /org/freedesktop/ConsoleKit/Session1 org.freedesktop.DBus.Properties.GetAll string:org.freedesktop.ConsoleKit.Session
Error org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 2 matched rules; type="method_call", sender=":1.17" (uid=1000 pid=13892 comm="dbus-send --print-reply --system --type=method_cal") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.ConsoleKit" (uid=0 pid=751 comm="/usr/sbin/console-kit-daemon --no-daemon ")

Server can't be found messages and real slow page loads or failing to load

I'm getting "server can't be found" messages and pages not loading happening alot lately. I thought it was the latest Firefox I had (1.5.0.2) but it's happening with Safari 2.0.3 as well. I thought it might also be my ISP since the cable modem line that comes in from the street now gets taped for my landlady's house for internet access as well as her tv service. I have had internet using this connection for about 3 years now and she has had tv service since before I moved in but only lately did she start to get internet access as well. I thought perhaps they screwed up something when they connected her to the internet as well. I live in a separate house a little back from the road than she does. (I haven't checked but I would assume there is only one cable feed coming to her house. Mine got split off of hers and then is buried underground til it reaches my house. I want to look at the connections on her house and tighten anything that is loose too.) These slowdowns/can't connects happen when she is not home so we can rule out her using the line causing trouble.
With all these clues, what do you think it can be? I'm visiting sites I've always visited, not new ones. I let autocomplete pick the URL so the URLs are all from my current bookmarks and are places I go all the time.
Pages tend to either load right away or they take forever. I'll get some progress on the location bar (with Safari) or the progress bar with Firefox and then after a LONG wait (a minute or so), it will say it can't connect. If this was a car it'd be driving VERY haltingly. Refreshing either does nothing or loads the page instantly.
What do you think it is? the normal ups and downs of the internet or something wrong with a) my machine/OS or b) my internet connection. One change I've made lately are to use and then reset to default, Tiger Cache Cleaner's Optimize Tune for Broadband (and cache cleaner to troubleshoot a Yahoo IM problem which was solved by deleting all Yahoo IM related files and reinstaling the IM).
Many thanks.
John L

I looked at this thread: http://discussions.apple.com/thread.jspa?threadID=453191&tstart=0 and it suggested I stop Safari from caching. I didn't see any way to do that without using something like what someone suggested elsewhere: Safari Enhancer (3.3). I set Safari Enhancer to Deactivate Cache. I also tried accepting All cookies; I'd had it set to only 'accept only from sites I navigate to'.
What do you know. My browsing is mostly fantastic! I've never seen a browser act so fast on a Mac. Over the years (since 1997 or so) I've used Netscape, IE, Firefox, Mozilla, iCab, Opera, and others but all were always sluggish (w/ OS 7, 9 and X on a 500 mhz Powerbook Firewire and this machine.). Now, pages mostly load - boom; I don't watch them load as I always did before. I still do get some that hang while the one remaining item out of the total loads but overall it is much better. No 'server can't be found messages' since doing this.
I am not certain that accepting All cookies has anything to do with this but I am pretty happy with turning the cache off. (I have a cable modem.)
Maybe this will help others?
I'll keep posting if anything changes. I do look forward to going back to Firefox, assuming turning the cache off will be the cure there too, since it has the features I like but at least it is encouraging the Safari can be so fast. (And so far has better bookmark management than Firefox's which are horrendous.)
Cheers,
John L

How can I get my Microsoft Outlook messages and contacts onto my new M-Book

I need to get my messages and contacts from Microsoft Outlook(not Outlook Express) into Entourage on my new MacBook Pro. Can anyone please help?
Thanks.

Welcome to Apple Discussions!
You'll find some solutions on this page.
http://www.apple.com/macosx/switch/howto/network.html

Mail - Forwarding attachments manually and with rules - how do I keep my attachments?

I have the latest updates of Lion on by MacBookPro (late 2010 model). I use mail to receive mail from my business account (Exchange account) and my personal account (IMAP account). Up until this summer, everything was working peachy with the system. I have multiple folders in my accounts and many rules to sort the mail and some that automatically forward mail messages to other people in my office who are also on exchange server.
Since this summer, we really noticed in August, we have noticed that the attachements are sometimes missing from emails I send out either automatically through rules (attachements never appear in the emails on the receiver's end) or manually, sometimes they receive, sometimes they don't (most of the times, but not always, when they don't work, it is a pdf in attachement, although it has happened on occasion with docs and jpgs or other graphics files). The bizarre thing is that on occasion a receiver replies to my email telling me there is no attachement, and although the email I receive doesn't show a paperclip, the attachament is actually embedded in the email!
If I write a new mail, and manually add an attachement, it seems to work.
My IT guy, who runs the exchange server says that it is bizarre because he can see the attachement in my email, but when it is delivered it disappears, but if he opens it at the server, it reappears. He has made all the latest updates and has trolled the support sites, but has found no solution.
I receive a newsletter everyday, which is a rather large 8-10 Mb pdf. My rule tells it to automatically forward to the receptionnist so that she can send it out to her mailing list. The message I receive always has the attachment, but in the forwarded message the attachment dissappears. In this case, when I look at message in my sent mail folder - there is no attachment. I tried using re-direct instead of forward as a rule and it still did the same thing...
I guess I want to know if anyone is experiencing the same issue, and if anyone has any other solutions to make forwarding work better.
P.S. When I use the IMAP account, the forwarding doesn't seem to be a problem, however I can't figure out how I could run a rule for an email I receive on my exchange account so that it forwards via my IMAP account. Also this would not be ideal, as then all my business contacts would get mail from my personal account...
Thanks for any help you could provide.

Uncheck:
But you'll still have to navigate around the icon.

WPC / Welcome Message in a Container not in Masthead

Hi there,
i have a Question. Is it possible to drop the Welcome Message from the Masthead into a Container of the WPC?
On the Masthead there is a Welcome Message called: Welcome Mr. Testuser (depending on the User who logged in)
I have a Container with Text in it... a Startsite.. so i know want that the Welcome Message is now displayed in the Container.. is this possible?
Regards
Bjoern

Hi,
yes you can take the iview and display it in your site Page.
You can find this iview under the name "com.sap.portal.masthead"
Fabien.

Error in Asset Accounting Specify Intervals and Postings Rules

Hi,
I am configuring for Asset Accounting and when I go to this part:
Asset Accounting > Integration with the General Ledger > Post Depreciation to the General Ledger > Specify Intervals and Postings Rules
I get the error "Company code XXXX is not defined" (message no. AC519).
The company code specified in the error was deleted in the system before. I am thinking that there is a table where this company code is not yet deleted. How can I solve this? Thanks a lot.

Create the company again, make your changes and delete the company again

Transaction Posting Confirmation Message and Action Listener behaviour

Hi, I have a scenario that a user is Posting a Transaction and when he press the “Post” Button a, confirmation dialog box should popup asking “Do you really want to Post the record ?”. If the user press “Yes” the record is further process and If the user press “No” then the transaction should not proceed.
I have implemented the main screen(PostTransaction.java) and the popup confirmation window(ConfirmationWindow.java)
Question 1 ) Why the code is not stoping in the Post Button Action listener as in JOptionPane, then how do i know that the user has selected "Yes" or "No" ?
Question 2) Do I have to write the code for posting of a Transaction(postTransaction() method) in the “ConfirmationWindow”? or it should be in “PostTransaction”.
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.application.Application;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.Label;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class PostTransaction extends Application{
       public void start(final Stage stage) throws Exception {
              Group root = new Group();
              Scene scene = new Scene(root, 300,300);
              stage.setScene(scene);
              stage.setTitle("Transaction Post Screen");
              GridPane gp = new GridPane();
              Label lblName = new Label("Name");
              Label lblAmount = new Label("Amount");
              TextField txtName = new TextField();
              TextField txtAmount = new TextField();
              Button btnPost = new Button("Post Record");
              gp.add(lblName, 1, 1);
              gp.add(lblAmount, 1, 2);
              gp.add(txtName, 2, 1);
              gp.add(txtAmount, 2, 2);
              gp.add(btnPost, 2, 3);
              btnPost.setOnAction(new EventHandler<ActionEvent>() {
                    @Override
                    public void handle(ActionEvent arg0) {
                         //The code does not stop here as in JOptionPane, then how do i know that the user has selected "Yes" or "No" ??
                         boolean popupResult = ConfirmationWindow.confirmTranactionPosting(stage, "Please Confirm");
                         if(popupResult==true){
                              //This line is printed before the user selects yes or no
                              System.out.println("Proceeding with Tranaction Posting");
                              //postTransaction();
                         if(popupResult==false){
                              //This line is printed before the user selects yes or no
                              System.out.println("Do not Proceed with Tranaction Posting");
             root.getChildren().add(gp);
            stage.show();
            public static void main(String[] args) {
              launch(args);
          private void postTransaction(){
               //write the code for posting here
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.Label;
import javafx.scene.layout.BorderPane;
import javafx.scene.layout.HBox;
import javafx.stage.Modality;
import javafx.stage.Stage;
import javafx.stage.StageStyle;
public class ConfirmationWindow extends Stage {
     Stage owner;
     Stage stage;
     BorderPane root;
     static boolean postStatus = false;
public ConfirmationWindow( Stage owner, String title){
    root = new BorderPane();
    stage = this;
    this.owner = owner;
    initModality( Modality.APPLICATION_MODAL );
    initOwner( owner );
    initStyle( StageStyle.UTILITY );
    setTitle( title );
    setContents();
public void setContents(){
    Scene scene = new Scene(root,250,150);
    setScene(scene);
    Group groupInDialog = new Group();
    groupInDialog.getChildren().add( new Label("Do you really want to Post this record ?") );
    root.setCenter( groupInDialog );
    Button yes = new Button( "Yes" );
    yes.setOnAction(new EventHandler<ActionEvent>() {
          @Override
          public void handle(ActionEvent e) {
               postStatus =true;
               stage.close(); // Close the pop up. Transfer control to PostTransaction.java and execute the PostTransaction() method.
    Button no = new Button( "No" );
    no.setOnAction(new EventHandler<ActionEvent>() {
          @Override
          public void handle(ActionEvent e) {
               postStatus =false;
               stage.close(); // Close the pop up only
    HBox buttonPane = new HBox();
    buttonPane.setSpacing(10);
    buttonPane.getChildren().addAll(yes,no);
    root.setBottom(buttonPane);
    stage.show();
public static boolean confirmTranactionPosting(Stage owner, String title) {
       new ConfirmationWindow(owner, title);
       return postStatus;
}

The MII Message listener is a queue. But when I understand you correctly, you do not want to process the messages immediately after arriving in the Listener.
Maybe the categorization of messages is an option for you (see [Sap Help: Processing Rule Editor - Category|http://help.sap.com/saphelp_mii121/helpdata/en/43/e80b59ad40719ae10000000a1553f6/frameset.htm]. You can enter a category for the control recipe messages. The messages will then be placed in the Listener queue. You can use the [Message Services|http://help.sap.com/saphelp_mii121/helpdata/en/43/e80b59ad40719ae10000000a1553f6/frameset.htm] actions to read the categorized messages and process them as you need.
In addition to Manoj, you may also use the [Queueing actions|http://help.sap.com/saphelp_mii121/helpdata/en/43/e80b59ad40719ae10000000a1553f6/frameset.htm] of MII, where you can queue xml contents.
Hope this helps.
Michael

Welcome message and engagement rules

Similar Messages

Maybe you are looking for