Welcome to Solutions and Architectures Borderless Networks Community

Welcome to the Solutions and Architectures Borderless Networks Community. We encourage everyone to share their knowledge and start conversations related to Borderless Solutions and architectures. All topics are welcome, including Switches, Routers, Security, Wireless, Cloud and System Management, WAN Optimization and solutions to solve business problems.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
Cheers,
Dan Bruhn

Hi,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

Similar Messages

Welcome to the Solutions and Architectures Data Center & Virtualization Community

Welcome to the Solutions and Architectures Data Center & Virtualization Community. We encourage everyone to share their knowledge and start conversations related to Data Center and Virtualization Solutions and architectures.All topics are welcome, including Servers – Unified Computing, Data Center Security, Data Center Switching, Data Center Management and Automation, Storage Networking, Application Networking Services and solutions to solve business problems.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
Cheers,
Dan Bruhn

Hi,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

Welcome to the Solutions and Architectures Collaboration Community

Welcome to the Solutions and Architectures Collaboration Community. We encourage everyone to share their knowledge and start conversations related to Collaboration Solutions and architectures.All topics are welcome, including Collaboration Applications, Customer Collaboration, Telepresence, Unified Communications and solutions to solve business problems.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
Cheers,
Dan Bruhn

Hi,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

New Solutions And Architectures Community

I am pleased to announce the launch of our new Cisco Solutions and Architectures Community with sub-communities for Borderless Networks, Collaboration, Data Center & Virtualization. We encourage everyone to share their knowledge and start conversations related to network design and overall Cisco network topology.
All topics are welcome, including WAN, LAN, enterprise, service provider, data center / virtualization, wireless, security, collaboration, voice & video network design architecture and solutions to solve business problems.
The content from our pilot Network Infrastructure “Design and Architecture” community will be merged into the appropriate Solutions and Architectures sub-community.
Cheers,
Dan

Hi,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

Broken Link - Firewall and Virtual Private Network Communication for Oracle

The link for Firewall and Virtual Private Network Communication for Oracle Enterprise Manager on http://otn.oracle.com/products/oem/files/best_practices.html returns a 404 error. It is not pointing to the correct document

This link is still broken !
Can you please correct this ASAP ?
Best regards, Yolanda
Oracle HUB support services

Welcome to the Design and Architecture Community

Welcome to the Network Infrastructure Design and Architecture Community. We encourage everyone to share their knowledge and start conversations on design and overall network topology. All topics are welcome, including requirements and constraints of the network, tools and techniques, issues of hierarchy, leading practices, services, build strategies, architectures and solutions to solve business problems.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
Cheers,
Dan BruhnCSC Community Manager

been waiting to see a forum like this. This forum should amalgamate all the other areas like R&S, security, DC design, and provide more quality , proven solns and discuss problems/challenges as well. Will be following this forum regularly
thanks dan for creating this community
Regards Kishore

New Network Infrastructure Design and Architecture Community

All,
I'm pleased to announce our new Network Infrastructure Design and Architecture Community. In this community we encourage everyone to share their knowledge and start conversations on design and overall network topology. All topics are welcome, including requirements and constraints of the network, tools and techniques, issues of hierarchy, leading practices, services, build strategies, architectures and solutions to solve business problems.
Who will be the first to make it on that leaderboard?
Cheers,
Dan

Mike,
Thanks for the kind words about the community. It's always nice to hear the things we do make a difference.
Launching a scripting community has come up a few times in the past and I'm open to it. Anyone else have thoughts on this?
On a separate note, you'll be thrilled to hear what one of our CSC booth give-aways will be at Cisco Live San Diego next week. Your best friend the cross-over-cable    For those of you out there attending the event be sure and stop by the CSC booth.
Cheers,
Dan

Full mesh VPN solution for on MPLS network with PE and CPEs

Hi,
We are trying to evaluate some best solution for Hub-Spoke mesh vpn solution in a MPLS network. The VPN hub router will be in PE router and all the VPN spoke will be in CPE.
Can someone please let us know what will be the best vpn solution, we understands that there will be some technical limitations going with GETVPN but still we did counld find any documenation for possiblity of using DMVPN.
How about the recent flexvpn, can fex-vpn work on this requirement, where can i get a design/configuration document.?
thanks in advance.

Hello,
GetVPN is intended for (ANY-to-ANY) type of VPN communication, over an MPLS network with Hub and Spoke Topology, your best Option is to look for Cisco (DMVPN) implementation where this type of VPN is primarily designed for Hub & Spoke.
Regards,
Mohamed

I can use cut and paste in Rich Text Editors for all web site hosts but one. I have tried the solution you provided, but it doesn't work. Any ideas? the website that rejects cut and paste is Network Solutions

I really hoped you would fix the security policy issue in release 4. I have to close Firefox and use IE9 to maintain a website I built with Network Solutions and I'd much rather not have to endure the slowness of IE. I also have websites with Wix and WEBS and have no problems at all using cut and paste with them.

Did you have it connected to the library mac when it froze? If so, why? I would be hesitant to hook my ipod to a unprotected public computer since it may be infested with viruses or have unknown hardware problems.
In any case, if you can get it to an Apple store they can probably help you with it, it sounds like it needs replacing.
A certain percentage of any complex product will turn out to be defective and will have to be returned, it sounds like you were unlucky enough to get one. Looking over the forums here it may seem like the ipod is plagued with bugs, but don't forget that there are millions who never have a problem and so have no reason to pipe up here. Personally I think Apple deserves a thumbs up for continuing to host these forums in spite of how they may cast a negative light on thier products to the casual observer.
5G 60GB Black iPod Windows XP Pro

Can't do google seaches or get tabs to open without ringo and get the alert..The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly.

I can't get tabs to open or google search to operate without constant ringo and I get the alert...The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly. I have 8.0 firefox version

This is a known bug and it is being worked on.
The relevant bug report is [https://bugzilla.mozilla.org/show_bug.cgi?id=588511 Bug 588511], but please do not comment on the bug report.

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
http://www.stratospherix.com/products/filebrowser/
Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

Is there a solution to open the network locked iphone 6 Ali Sprint I've purchased iphone 6 from ebay and upon arrival I have to drag the device is locked and not supporting the network in Saudi Arabia

Is there a solution to open the network locked iphone 6 Ali Sprint
I've purchased iphone 6 from ebay and upon arrival I have to drag the device is locked and not supporting the network in Saudi Arabia

There is no solution other than to contact Sprint and ask them if they will unlock it.

Ask the Experts: IOS-XR Fundamentals and Architecture

Welcome to the Cisco Support Community Ask the Expert conversation.
Learn and ask questions about IOS-XR Fundamentals and Architecture.
November 18, 2014 through November 28, 2014.
Cisco IOS XR Software is a modular and fully distributed network operating system for service provider networks. Cisco IOS XR creates a highly available, highly secure routing platform.
It distributes processes across the control, data, and management planes with their own access controls and delivers routing-system scalability, service isolation, and manageability.
This is a Q&A extension of the Live expert Webcast.
Cisco subject matter experts Sudeep, Raj, and Sudhir, will focus on IOS-XR fundamentals.
Including:-
High-Level Overview of Cisco IOS XR
Cisco IOS XR Infrastructure
Configuration Management
Cisco IOS XR Monitoring and Operations
Cisco IOS XR Security
Introduction to different IOS-XR platforms
Sudeep Valengattil is a customer support engineer in High-Touch Technical Services at Cisco specializing in service provider technologies and platforms. Sudeep has got experience on XR platform like ASR9000, CRS, NCS and GSR. Sudeep has more than 9 years of experience in the IT industry and holds CCIE certification (36098) in Service provider.
Sudhir Kumar is a customer support engineer in High-Touch Technical Services at Cisco specializing in service provider technologies and platforms. His areas of expertise include Cisco CRS, ASR 9K and Cisco XR 12000 Series Routers. Sudhir has more than 10 years of experience in the IT industry and holds CCIE certification (35219) in Service provider and Routing and switching.
Raj Pathak is a customer support engineer in High-Touch Technical Services at Cisco specializing in service provider technologies and platforms. He serves as a support engineer for technical issues supporting Cisco IOS XR Software customers on Cisco CRS and Cisco XR 12000 Series Routers. Raj has more than 8 years of experience in the IT industry and holds CCIE certification (38760) in routing and switching.
For more information about this topic, visit the Expert Corner > Knowledge Sharing
Remember to use the rating system to let the experts know if you have received an adequate response.

Hi Charles,
To answer your question,
LPTS would be acting only on packet/traffic which is ingressing the router and destined for the router itself (for-us packets). It provides an internal forwarding table to route control/management protocol packets destined to local router to the right application for further processing. Once we have a packet entering the interface, the network processor would be performing a lookup to determine, if this packet is destined for us. Based on which, it will forward to LPTS. For eg, the ICMP packets coming in on an interface with destination IP of router itself, would be processed by LPTS. It also provides policing function for this traffic transparently.
Key facts about LPTS
1. LPTS is an always on feature. No user configuration needed to enable it.
2. LPTS is only applicable for traffic entring to the router and destined to the local router. Applies for control-plane and management plane traffic.
3. Packets originated by router and transit traffic is not processed by LPTS
4. LPTS polices the incoming traffic based on the pre-defined policer rates.
Here is an o/p snip to view the LPTS entries.
RP/0/RP0/CPU0:CRS-C#sh lpts pifib hard police loc 0/0/cpu0
Tue Nov 25 23:32:10.666 EDT
Node 0/0/CPU0:
Burst = 100ms for all flow types
FlowType Policer Type Cur. Rate Def. Rate Accepted Dropped
unconfigured-default 100 Static 500 500 0 0
L2TPv2-fragment 185 Static 700 700 0 0
Fragment 106 Static 1000 1000 0 0
OSPF-mc-known 107 Static 20000 20000 44818 0
OSPF-mc-default 111 Static 5000 5000 11366 0
Do let us know if you have any further queries.
Regards,
Sudeep Valengattil

Network communication Xacute applets client - Mii server

Hi all,
I have a rather technical question.
Does anybody know what goes on from a network communication point of view when an applet on a irpt-page gets executed and fetches data from the Mii server?
Do these applets use RMI or some other method?
It's because we might have network issues, and I would like to know how the applets work on network level.
Our architecture is as follows:
On the client an irpt page is displayed in a browser (MSIE). The irpt page contains applets generated by Xacute queries. We also rely a lot on JS.
The client application communicates with the Mii server over the WAN.
So if someone can tell me which ports are used by the applets, would be great!
W.

Ok, on the server side indeed the applets connect to 5nn00. I love the debug option!
Now, on our WAN we have defined a QoS, for traffic prioritizing. So certain port numbers (or ip-adresses) get priority over the network. We added port 52000 (used by Mii) to this QoS, but unfortunately the traffic does not get prioritized.
The problem is that on the client side (Mii HTTP application), we cannot control which ports are opened (that's the OS).
On client side it could be port 4000 to 65999 or something. When we do port-prioritizing, this can never work.
So how do we configure our QoS? Prioritize everything going to and coming from the Mii server?
Anyone experience with that? I know it's not directly related to SAP and Mii, but when working with Mii one stumbles onto all kind of technologies
cheers!

Get the MCC and the MNC of the SIM card and of the network

Hello,
We publish a network speed and quality measurement application used on desktop, tablet and smartphone.
This application is called nPerf. It is available on desktop via a web browser at www.nperf.com, on iOS at ios.nperf.com and Android at android.nperf.com.
We are currently working on porting our solution for Windows Phone / Windows. The project is a universal project using Windows RT 8.1 (Visual Studio 2013 Express Update 4).
However, the project is currently "stuck" because we lack two essential information to identify the operator of the user: the MCC (Mobile Country Code) and MNC (Mobile Network Code), at least those contained in the SIM card.
Ideally, we would also need, in order of priority, the MCC and the MNC of the active connection (in the case of roaming), a DB signal strength of type RSSI or RSRP (more accurate than the number of reception bars displayed on the phone), the id of the cell
on which the connection is established (CellId) and the cell area code (LAC or TAC).
I have reviewed all the Windows RT 8.1 APIs available, particularly the namespace Windows.Networking.Connectivity and none seems to contain this information.
We would understand that it is not possible to access all this information but the SIM MCC and MNC are really needed and are available on other systems such as iOS or Android. It would really be a pity if we are not able to continue the development of this
application simply because these two information is not available ...
Would it be possible to tell us how to retrieve this information or, failing that, to give us the e-mail address or phone of a person likely to talk with us about this and identify possible steps to take to find a solution mutually acceptable?
Thanking you in advance,
FH Sarl company

Hi Usnake,
“Mobile Network code” and “Mobile country code” has not public API to third party apps.
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/9dbeca88-be45-4708-bd2a-14766182a7eb/how-to-get-mcc-and-mnc-in-window-phone?forum=wpdevelop.
If you are asking for them, I suggest you send a request to
https://wpdev.uservoice.com/forums/110705-dev-platform.
Thank you for understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Welcome to Solutions and Architectures Borderless Networks Community

Similar Messages

Maybe you are looking for